KAGRA MIR (Absorption)
MarcEisenmann - 17:34, Wednesday 28 April 2021 (2478)
Comment to 3d absorption map of 1cm thick SHINKOSHA sample (Click here to view original report: 2476)

Marc, Matteo, Yuhang

We used the green light to check possible dust on the mirror and took a picture after already using the air dust once.

The mirror is really dirty...

We then used again the air dust and could remove most of the large dust particles but not the smallest one (not visible on picture so no 'after picture').

We can still see the ethanol/acetone trace at the mirror edge so the mirror got dirty either during shipping or during the few weeks it stayed inside the clean room without cover.

We will clean it with first contact after the golden week.

Images attached to this comment
2478_20210428103424_img20210428163900.jpg