[[Observing Log]]
----
#contents
----
* CSV2016: Radio pointing offsets of DASH345/BAND8 (2016-09-16) [#a0fa2c76]
** Tasks [#bca0bf9a]
- Radio pointing offsets in DASH345
*** Preparations [#q8fdd852]
+ Basic checks
-- Record which kisa files are used for DASH345 and BAND8
+
aste16@aste-ms1: ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
lrwxrwxrwx 1 astecntl astctl 12 Sep 15 05:04 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.160913
lrwxrwxrwx 1 astecntl astctl 12 Sep 15 05:04 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.160913
-- Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
-- Check Aspirin is working in the "WIND" mode
+ Tuning at EL=60.0 deg
-- [[Tuning of DASH345/BAND8 for continuum observations>CSV/2016#i6322df7]]
-- Don't forget to record weather conditions
*** Radio pointing offsets of DASH345/BAND8 [#a03e56f6]
- Its instruction is [[HERE>CSV/RadioPointingMeasurementSBRx]]
+ Repeat cross scans toward Saturn and shots of a star one after the other
+ Data reduction
-- Still under preparation
----
** Information [#xcc00429]
- Observers: Tanaka, Ashitagawa
- Site: Mitaka
- Weather conditions (2016-09-16UT23:21)
Temperature: -0.75 C
Humidity: 573.22 hPa
Wind: 7.70 m/s (255 deg)
220GHz opacity: 0.0722
+ Basic checks
-- Kisa
[aste16@aste-ms1 ~]$ ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
lrwxrwxrwx 1 astecntl astctl 12 Sep 15 05:04 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.160913
lrwxrwxrwx 1 astecntl astctl 12 Sep 15 05:04 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.160913
-- Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero --> OK
-- Check Aspirin is working in the "WIND" mode --> OK
+ Tuning at EL=60.0 deg
[asteobs@aste-1c ~]$ swbox_ctl_be CONT
[asteobs@aste-1c ~]$ swbox_ctl_be
status: swbox_ctl_be CONT
[asteobs@aste-1c ~]$ asterx_sw DASH345
### SYNTHE RF-OFF ###
/cosmos3/naoj/bin/synthe_ctl B RF OFF
FREQ = 12.966151717 [GHz]
AMPL = 13.00 [dBm]
RF = ON
### After setting synthe ###
FREQ = 12.966151717 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
### SWBOX changed ###
/cosmos3/naoj/bin/swbox_ctl_rx 0
### SYNTHE set ###
/cosmos3/naoj/bin/synthe_ctl B AMPL +20dBm
FREQ = 12.966151717 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
### After setting synthe ###
FREQ = 12.966151717 [GHz]
AMPL = 20.00 [dBm]
RF = OFF
/cosmos3/naoj/bin/synthe_ctl B RF ON
FREQ = 12.966151717 [GHz]
AMPL = 20.00 [dBm]
RF = OFF
### After setting synthe ###
FREQ = 12.966151717 [GHz]
AMPL = 20.00 [dBm]
RF = ON
[asteobs@aste-1c ~]$
[asteobs@aste-1c ~]$
[asteobs@aste-1c ~]$
[asteobs@aste-1c ~]$ synthe_ctl B FREQ 14.375
FREQ = 12.966151717 [GHz]
AMPL = 20.00 [dBm]
RF = ON
### After setting synthe ###
FREQ = 14.375000000 [GHz]
AMPL = 20.00 [dBm]
RF = ON
[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 345.000000000
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 345.000000000
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00
OK
> GET_CLNA 0 1
1.204880,10.052338,-0.278748,0.003311,0.012970,4.910278,0.003647,0.023651,4.910294,1
> GET_CLNA 0 2
1.204895,10.045776,-0.381653,0.003250,0.022430,-4.848297,0.004089,0.022888,4.910248,1
> GET_CLNA 1 1
1.205811,10.046082,-0.796448,0.003189,0.022278,-4.882111,0.003235,0.024567,-4.882172,1
> GET_CLNA 1 2
1.206573,10.097809,-0.301575,0.003830,0.018616,-4.882095,0.003479,0.014343,4.931671,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 345.000000000
345.000000 1.900000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.900
OK
> SET_SIS_V 0 2 1.900
OK
> SET_SIS_V 1 1 1.900
OK
> SET_SIS_V 1 2 1.900
OK
> GET_SIS_VC 0 1
1.785507,6.503296
> GET_SIS_VC 0 2
1.786728,8.126831
> GET_SIS_VC 1 1
1.805038,28.918457
> GET_SIS_VC 1 2
1.812897,34.631348
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 345.000000000
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 345.000000000
/cosmos3/naoj/bin/loatt_dash345 225 310
Set ATT : Pol0=225, Pol1=310
Pol0 = 225 , Pol1 = 310
Pol0 = 0.005489[A], Pol1 = 0.007566[A]
Pol0 = 0.658653[V], Pol1 = 0.776482[V]
[asteobs@aste-1c ~]$ swbox_ctl_pol 0 1
[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 0 1
400:P0-USB 402:P1-USB
[asteobs@aste-1c ~]$ cont_if 2 22
Cont IF #2 Att. = 21 [dB]
changed Cont IF #2 att. = 22 [dB]
recieved value = -2.25063000E-04
recieved value = -2.25063000E-04
Cont IF #2 Lev. = -0.000225 [V]
[asteobs@aste-1c ~]$ cont_if 3 17
Cont IF #3 Att. = 0 [dB]
changed Cont IF #3 att. = 0 [dB]
recieved value = -1.19975000E-04
recieved value = -1.19975000E-04
Cont IF #3 Lev. = -0.000120 [V]
+
ASTE Environment Monitor 2016/09/15 23:34:15
===================================ASTE Site===================================
Temp. : -1.63 C Humid. : 13.99 % ( 0.76 hPa ) Solar : 0.00 kW/m2
Wind : 4.82 m/s 241 deg AirPressure : 573.31 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0376
================================ Receiver Cabin ===============================
Main Cabin: 19.6 C Upper Cabin: 13.5 C AzTEC AE: 168.6 C Dewar: 168.6 C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 14.22 degC Humid. : 4.56 %
Digital BE: 17.50 degC 19.80 degC 21.60 degC 21.20 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 15.40 C 15.40 C 14.90 C 15.90 C -7.60 C 16.70 C
Internal Ret. 16.89 C 15.30 C 15.10 C 9.10 C 15.20 C 16.20 C
External 168.60 C -2.60 C 4.20 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 24.50 degC 21.90 degC -1.40 degC
Room Temp.: 21.50 degC
** Radio pointing offsets in DASH345 [#b106970b]
-UT23:31 t163-16C.start
--OPT image OK
-UT23:39 istd3.list
az, el = -91, 58
daz, del = 0, 1
-UT00:34 crash & priority lost
--connection to aste-c1c lost
---confirmed no iPOT running and restarted iOPT
--restarted istd3.list
az, el = -96, 44
- envmon@UT0109
Temp. : -1.57 C Humid. : 13.13 % ( 0.71 hPa ) Solar : 0.00 kW/m2
Wind : 1.48 m/s 290 deg AirPressure : 573.61 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0507
- UT0213 observation "Emergency Stop"ped. Restart iOPT & istd3 dAz, dEl = 0, 1
- UT0221 stopped after the opt scan.
** Standard sources in DASH345 [#b106970b]
- UT0225 tuning /w M17C3ch
Temp. : -3.75 C Humid. : 11.29 % ( 0.52 hPa ) Solar : 0.00 kW/m2
Wind : 2.33 m/s 230 deg AirPressure : 573.84 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0453
- tuning log
[asteobs@aste-1c ~]$ asterx_sw DASH345
### SYNTHE RF-OFF ###
/cosmos3/naoj/bin/synthe_ctl B RF OFF
FREQ = 12.966151717 [GHz]
AMPL = 13.00 [dBm]
RF = ON
### After setting synthe ###
FREQ = 12.966151717 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
### SWBOX changed ###
/cosmos3/naoj/bin/swbox_ctl_rx 0
### SYNTHE set ###
/cosmos3/naoj/bin/synthe_ctl B AMPL +20dBm
FREQ = 12.966151717 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
### After setting synthe ###
FREQ = 12.966151717 [GHz]
AMPL = 20.00 [dBm]
RF = OFF
/cosmos3/naoj/bin/synthe_ctl B RF ON
FREQ = 12.966151717 [GHz]
AMPL = 20.00 [dBm]
RF = OFF
### After setting synthe ###
FREQ = 12.966151717 [GHz]
AMPL = 20.00 [dBm]
RF = ON
[asteobs@aste-1c ~]$
[asteobs@aste-1c ~]$
[asteobs@aste-1c ~]$
[asteobs@aste-1c ~]$ synthe_ctl B FREQ 14.375
FREQ = 12.966151717 [GHz]
AMPL = 20.00 [dBm]
RF = ON
### After setting synthe ###
FREQ = 14.375000000 [GHz]
AMPL = 20.00 [dBm]
RF = ON
[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 345.000000000
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 345.000000000
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00
OK
> GET_CLNA 0 1
1.204880,10.052338,-0.278748,0.003311,0.012970,4.910278,0.003647,0.023651,4.910294,1
> GET_CLNA 0 2
1.204895,10.045776,-0.381653,0.003250,0.022430,-4.848297,0.004089,0.022888,4.910248,1
> GET_CLNA 1 1
1.205811,10.046082,-0.796448,0.003189,0.022278,-4.882111,0.003235,0.024567,-4.882172,1
> GET_CLNA 1 2
1.206573,10.097809,-0.301575,0.003830,0.018616,-4.882095,0.003479,0.014343,4.931671,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 345.000000000
345.000000 1.900000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.900
OK
> SET_SIS_V 0 2 1.900
OK
> SET_SIS_V 1 1 1.900
OK
> SET_SIS_V 1 2 1.900
OK
> GET_SIS_VC 0 1
1.785507,6.503296
> GET_SIS_VC 0 2
1.786728,8.126831
> GET_SIS_VC 1 1
1.805038,28.918457
> GET_SIS_VC 1 2
1.812897,34.631348
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 345.000000000
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 345.000000000
/cosmos3/naoj/bin/loatt_dash345 225 310
Set ATT : Pol0=225, Pol1=310
Pol0 = 225 , Pol1 = 310
Pol0 = 0.005489[A], Pol1 = 0.007566[A]
Pol0 = 0.658653[V], Pol1 = 0.776482[V]
[asteobs@aste-1c ~]$ swbox_ctl_pol 0 1
[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 0 1
400:P0-USB 402:P1-USB
[asteobs@aste-1c ~]$ cont_if 2 22
Cont IF #2 Att. = 21 [dB]
changed Cont IF #2 att. = 22 [dB]
recieved value = -2.25063000E-04
recieved value = -2.25063000E-04
Cont IF #2 Lev. = -0.000225 [V]
[asteobs@aste-1c ~]$ cont_if 3 17
Cont IF #3 Att. = 0 [dB]
changed Cont IF #3 att. = 0 [dB]
recieved value = -1.19975000E-04
recieved value = -1.19975000E-04
Cont IF #3 Lev. = -0.000120 [V]
[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.555171528
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.555171528
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00
OK
> GET_CLNA 0 1
1.204910,10.061951,-0.277893,0.003296,0.012817,4.910233,0.003677,0.022430,4.910187,1
> GET_CLNA 0 2
1.204987,10.065308,-0.381470,0.003250,0.023651,-4.848282,0.004120,0.021210,4.910110,1
> GET_CLNA 1 1
1.205994,10.043793,-0.795547,0.003174,0.021515,-4.881958,0.003235,0.025482,-4.882050,1
> GET_CLNA 1 2
1.206680,10.093994,-0.301086,0.003708,0.018921,-4.882187,0.003433,0.013885,4.931534,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.555171528
351.555172 1.900000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.900
OK
> SET_SIS_V 0 2 1.900
OK
> SET_SIS_V 1 1 1.900
OK
> SET_SIS_V 1 2 1.900
OK
> GET_SIS_VC 0 1
1.783524,158.673096
> GET_SIS_VC 0 2
1.788025,122.567749
> GET_SIS_VC 1 1
1.810608,32.382202
> GET_SIS_VC 1 2
1.814194,23.986816
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.555171528
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.555171528
/cosmos3/naoj/bin/loatt_dash345 293 286
Set ATT : Pol0=293, Pol1=286
Pol0 = 293 , Pol1 = 286
Pol0 = 0.007150[A], Pol1 = 0.006980[A]
Pol0 = 0.667248[V], Pol1 = 0.768096[V]
[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20160916t022510z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20160916t022510z open_mmc('mmc1:8501'): socket '4' connect success.
20160916t022510z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20160916t022510z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20160916t022511z mmc1 r reset_all.
mmc is active
20160916t022511z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20160916t022513z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20160916t022513z close_mmc(): socket '4' closed.
20160916t022513z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
E/O att. = 14 dB E/O att. = 14 dB IF level=0.036272
new E/O att. = 14 dB IF level=0.036697
new E/O att. = 16 dB IF level=0.021677
new E/O att. = 14 dB IF level=0.038955
14 dB 0.038955 V
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
E/O att. = 15 dB IF level=0.062566
new E/O att. = 15 dB IF level=0.057304
new E/O att. = 16 dB IF level=0.043079
new E/O att. = 15 dB IF level=0.061904
new E/O att. = 16 dB IF level=0.043266
16 dB 0.043266 V
[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20160916t022558z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20160916t022558z open_mmc('mmc1:8501'): socket '8' connect success.
20160916t022558z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20160916t022558z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20160916t022558z mmc1 r reset_all.
mmc is active
20160916t022558z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20160916t022600z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20160916t022600z close_mmc(): socket '8' closed.
20160916t022600z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
E/O att. = 14 dB
E/O IF level = 0.036221 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20160916t022603z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20160916t022603z open_mmc('mmc1:8501'): socket '8' connect success.
20160916t022603z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20160916t022603z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20160916t022604z mmc1 sky reset_all.
mmc is active
20160916t022604z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20160916t022606z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20160916t022606z close_mmc(): socket '8' closed.
20160916t022606z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
E/O att. = 14 dB
E/O IF level = 0.017209 V
R=0.036221 V, Sky=0.017209 V, Y=3.232048 dB
3.232048
[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20160916t022619z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20160916t022619z open_mmc('mmc1:8501'): socket '8' connect success.
20160916t022619z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20160916t022619z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20160916t022620z mmc1 r reset_all.
mmc is active
20160916t022620z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20160916t022622z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20160916t022622z close_mmc(): socket '8' closed.
20160916t022622z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
E/O att. = 16 dB
E/O IF level = 0.045119 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20160916t022625z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20160916t022625z open_mmc('mmc1:8501'): socket '8' connect success.
20160916t022625z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20160916t022625z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20160916t022625z mmc1 sky reset_all.
mmc is active
20160916t022625z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20160916t022628z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20160916t022628z close_mmc(): socket '8' closed.
20160916t022628z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
E/O att. = 16 dB
E/O IF level = 0.024406 V
R=0.045119 V, Sky=0.024406 V, Y=2.668629 dB
2.668629
[asteobs@aste-1c ~]$
-UT0230 pointing WAQD3pw
-- ->dAz, dEl = 1, 2.9
-UT0236 M17C3ch start
-rw-r--r-- 1 aste16 astgrp 2113920 Sep 22 01:37 /home/aste16/linux16/bkraw/acgpsw/M17C3ch.160916023632.01.nqm
-- A1&A2 (P1) are good, A3&A4 (P0) too weak
#ref(Screenshot-5.png,,70%)
[aste16@aste-ms1 linux16]$ ls -l ~/linux16/bkraw/acgpsw/M17C3ch.160916023632.01.nqm
-rw-r--r-- 1 aste16 astgrp 2113920 Sep 22 01:37 /home/aste16/linux16/bkraw/acgpsw/M17C3ch.160916023632.01.nqm
-UT0xxx M17C3cw start
-rw-r--r-- 1 aste16 astgrp 2113920 Sep 22 01:39 /home/aste16/linux16/bkraw/acgpsw/M17C3cw.160916030404.01.nqm
-- A1&A2 (P1) are good, A3&A4 (P0) too weak
-- suprious? signals at +-120km/s from the CO3-2 line
#ref(Screenshot-6.png,,70%)
[aste16@aste-ms1 linux16]$ ls -l ~/linux16/bkraw/acgpsw/M17C3cw.160916030404.01.nqm
-rw-r--r-- 1 aste16 astgrp 2113920 Sep 22 01:39 /home/aste16/linux16/bkraw/acgpsw/M17C3cw.160916030404.01.nqm
-UT03xx test1.start (USB side of M17C3cw)
-- suprious also in the USB side
#ref(Screenshot-7.png,,70%)
-UT0352 test2.start (same as test1 but with Fif = 5.85GHz)
-- suprious makes frequency shift with the main line
#ref(Screenshot-8.png,,70%)
-UT0600 OCTF3ph (pointing) dAz, dEl = 1, 2.9
-- restart COS3@MTK due to Qlook trouble (range error)
-UT0608 restart OCTF3ph
-- error again. restart cosmos on aste-1c
-- error again. gave up using this obsfile
-UT0633 OCFT3pw dAz, dEl = 1, 2.9
-- qlook worked! Seems the default settings for the fitting ranges are too wide for the high-res mode.
-- dAl, dEl = 2, 5
-UT0638 OKLC3ch start
-- UT0645 stopped after 12 scans
-UT064x OKLC3cw start
-- UT0652 stopped after 11 scans
-UT0700 OKLC3c2 tune
-- whsf_rsky
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
23.2 24.8 29.1 22.2 33.5 38.8 43.8 33.0 [mV]
Result: R-SKY
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
3.964 3.799 3.061 4.208 4.119 3.603 3.158 4.316 [dB]
Result: Tsys[Tamb=293K]
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
196.5 209.6 286.3 179.2 185.3 226.7 274.0 172.2 [K]
-- whsf_stab
*** average ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
20.5 2.0 20.2 73.8 18.7 47.5 -75.9 40.7 [mV]
*** stability ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
2426.41 25550.37 2265.37 733.03 2548.96 927.02 -673.88 1159.38 [%]
-- minakatta kotoni suru
- UT0706 OKLC3c2 start
-- UT0726 error. Repeated messages "now reconnecting ... (1/100)"
-- cannot control antenna console
-- envmon, asp-mon, and man-gui are alive.
- UT0746 restart cos3@MTK
-- did not work
- UT0750 restart cos3@ASTE
-- worked. antenna console is back
- UT0756 OKLC3c2 start
#ref(Screenshot-9.png,,70%)
-- X1 & X2 : USB P1, P0
-- X3 & X4 : LSB P1, P0
-- intensity scale of LSB,P0 appears wrong
- UT0810 antenna parked. priority released
![[PukiWiki]](http://www2.nao.ac.jp/~aste-www/aste_wiki/obs.jpg "[PukiWiki]")
