![[PukiWiki]](http://www2.nao.ac.jp/~aste-www/aste_wiki/obs.jpg "[PukiWiki]")
[[Observing Log]] * Linux COSMOS3 data [#n848cc56] - Mitaka Observer: Kamazaki Account: aste16 Project: linux16 - 01:00 Tuning (RDor-pw) az,el = -180 60 - 2016/02/05 01:06:32 Temp. : -1.32 C Humid. : 71.03 % ( 3.94 hPa ) Solar : 0.00 kW/m2 Wind : 11.65 m/s 173 deg AirPressure : 572.47 hPa ( Rain: 0.04 ) Opacity @220 GHz : 0.2005 - Current time = 2016/02/05 01:07:08 Aspirin time = 2016/02/05 01:07:01 Weather time = 2016/02/05 01:06:49 Aspirin Offset : (Az, El) = ( 8.30, 10.99 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK &br; - > asterx_set DASH345 LO Freq = 351.563647080 Pol0 = 292 , Pol1 = 286 Pol0 = 0.007124[A], Pol1 = 0.006980[A] Pol0 = 0.658300[V], Pol1 = 0.761772[V] > mmc1_rstop > ifeo_tune 1 0.030 16 dB 0.022468 V > ifeo_tune 2 0.050 14 dB 0.042491 V > mmc1_sstop > yfactor 1 R=0.025000 V, Sky=0.016208 V, Y=4.333709 dB > yfactor 2 R=0.044166 V, Sky=0.028017 V, Y=4.551438 dB - 01:25 Pointing (RDor-pw) az,el = -166 49 daz,del = 0.0 0.0 Tsys: A3=631 A4=682 Ta*: A3=~3 A4=~3 -> RDor-pw.160205012558.01.nqm - ~01:30 QLOOKL suddenly stopped updating its display. - 01:37 Retry Pointing (RDor-pw) az,el = -164 48 daz,del = 0.0 0.0 -> -4.0 0.0 -> RDor-pw.160205013806.01.nqm - Still no update in QLOOKL. 2016-02-05 01:37:55.196 aste-1c astqlsv DEB normal connection from aste-1c 2016-02-05 01:41:29.893 aste-1c astqlsv DEB adm: connection close [root@aste-1c aste]# ./rc3.d/S99astqlsv stop [root@aste-1c aste]# ./rc3.d/S99astqlsv start - 01:45 Retry Pointing (RDor-pw) az,el = -163 48 daz,del = -4.0 0.0 - Still no update in QLOOKL. [root@aste-mt1 asteobs]# /cosmos3/aste/rc3.d/S99astqllsv stop [root@aste-mt1 asteobs]# /cosmos3/aste/rc3.d/S99astqllsv start - 01:47 Retry Pointing (RDor-pw) Now QLOOKL is updating! az,el = -163 47 daz,del = -4.0 0.0 -> = -2.0 +1.0 Tsys: A2=602 A4=678 Ta*: A2=~3 A4=~4 -> RDor-pw.160205014811.01.nqm - 02:07 OriK-cw &color(red){(to be reduced)}; az,el = -41 67 daz,del = -2.0 +1.0 Tsys: Ta*: A2=~100 A4=~90 - 02:23 Orik-rw &color(red){(to be reduced)}; az,el = -48 65 daz,del = -2.0 +1.0 Tsys: A2=421 A4=519 - 2016/02/05 02:25:01 Temp. : -2.75 C Humid. : 78.45 % ( 3.91 hPa ) Solar : 0.00 kW/m2 Wind : 5.41 m/s 197 deg AirPressure : 572.88 hPa ( Rain: 0.04 ) Opacity @220 GHz : 0.1603 - Current time = 2016/02/05 02:25:11 Aspirin time = 2016/02/05 02:25:10 Weather time = 2016/02/05 02:25:08 Aspirin Offset : (Az, El) = ( 0.40, 1.21 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK - ~02:44 ERROR: Now observing. Cannot execute "Change Observer". --- COSMOS3 MANAGER GUI --- Group Project Filename aste16 linux16 RDor-pw aste16 linux16 OriK-cw aste16 linux16 OriK-rw aste16 linux16 (blank) <- when "List" was pressed. --- COSMOS3 MANAGER GUI --- - UTC03:22 Tuning (I102-c2) az,el = 42 60 - 2016/02/05 03:23:52 Temp. : -2.57 C Humid. : 70.23 % ( 3.55 hPa ) Solar : 0.00 kW/m2 Wind : 1.46 m/s 186 deg AirPressure : 572.72 hPa ( Rain: 0.03 ) Opacity @220 GHz : 0.1257 - Current time = 2016/02/05 03:23:58 Aspirin time = 2016/02/05 03:23:57 Weather time = 2016/02/05 03:23:48 Aspirin Offset : (Az, El) = ( 4.32, 1.11 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK - > asterx_set DASH345 LO Freq = 350.943752064 Pol0 = 307 , Pol1 = 287 Pol0 = 0.007491[A], Pol1 = 0.007005[A] Pol0 = 0.658476[V], Pol1 = 0.759868[V] > loatt_dash345 -p0 248 > loatt_dash345 -p1 226 Pol0 = 248 , Pol1 = 226 Pol0 = 0.006051[A], Pol1 = 0.005516[A] Pol0 = 0.647136[V], Pol1 = 0.745398[V] > whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2 ***Set ATT*** S1IFA:ATT_old = 6.50 [dB] S1IFA:ATT_new = 6.50 [dB] S1IFB:ATT_old = 6.00 [dB] S1IFB:ATT_new = 6.00 [dB] S2IFA:ATT_old = 6.75 [dB] S2IFA:ATT_new = 6.75 [dB] S2IFB:ATT_old = 6.75 [dB] S2IFB:ATT_new = 6.75 [dB] ***TPD voltage*** S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2 61.81 57.77 57.23 63.55 94.77 91.05 88.51 90.17 [mV] > whsf_rsky Result: R-SKY S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2 1.755 2.255 1.757 2.044 1.788 2.251 1.892 1.969 [dB] Result: Tsys[Tamb=293K] S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2 588.5 430.5 587.4 487.6 575.3 431.3 536.7 510.8 [K] > mmc1_rstop > whsf_stab 10 *** average *** S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2 61.8 57.9 57.6 63.6 94.9 91.6 89.2 90.4 [mV] *** stability *** S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2 0.24 0.53 0.60 0.24 0.59 0.95 0.93 0.60 [%] - 03:32 Tuning (jup-xc) az,el = +69 32 - 03:33 jup-xc The number of cycles was reduced to 20 from 100 in "DASH3_cross_ae4m". az,el = +69 32 Tsys = 558 -> CONT.jup-xc.aste16.linux16.201602050334.LCK &ref(CONT.jup-xc.aste16.linux16.201602050334.png,,25%); Cross scan is running, but no result is plotted in QLOOKC. Its messages are here: START OBSERVATION START qlookc_main Waiting for Start-Flag - 03:38 Retry jup-xc az,el = +68 33 Tsys = 530 -> CONT.jup-xc.aste16.linux16.201602050339.LCK &ref(CONT.jup-xc.aste16.linux16.201602050339.png,,25%); Cross scan is running from looking at SCM, but no result is displayed on QLOOKC. Here are some error messages from it. ERR!!STOP OBSERVATION No.Channel != No.Rx Check Obstable(Device Table)!! -03:52 Retry jup-xc az,el = +66 36 Tsys = 509 -> CONT.jup-xc.aste16.linux16.201602050352.LCK &ref(CONT.jup-xc.aste16.linux16.201602050352.png,,25%); After changing from ch12-13 to only ch12 in a device table, the previous message was gone. But, the next error is negative Tsys as shown below: Calibration 2016-02-05 03:56:40 Atm_tmp: -2.8 Tsys: Can't get Tsys !! Sky cal_R: -19846.8 cal_Sky: -12647.7 ch-01 cal_R: -19817.7 cal_Sky: -12616.4 cal_factor: 0.038 Just incase, prebox was done. [asteobs@aste-1c ~]$ prebox Ch 0 Gain:5 (+- 0.312 V) Ch 1 Gain:5 (+- 0.312 V) Ch 2 Gain:1 (+- 5.000 V) Ch 3 Gain:5 (+- 0.312 V) Ch 4 Gain:5 (+- 0.312 V) Ch 5 Gain:5 (+- 0.312 V) Ch 6 Gain:3 (+- 1.250 V) Ch 7 Gain:3 (+- 1.250 V) Ch 8 Gain:3 (+- 1.250 V) Ch 9 Gain:0 (+- 10.000 V) Ch 10 Gain:1 (+- 5.000 V) Ch 11 Gain:1 (+- 5.000 V) Ch 12 Gain:1 (+- 5.000 V) Ch 13 Gain:0 (+- 10.000 V) Ch 14 Gain:1 (+- 5.000 V) Ch 15 Gain:0 (+- 10.000 V) Gain set PREBOX Cutoff set PREBOX - 03:56 jup-xc az,el = +62 41 Tsys = 478 -> CONT.jup-xc.aste16.linux16.201602050356.LCK &ref(CONT.jup-xc.aste16.linux16.201602050356.png,,25%); Same Tsys calculation error in QLOOKC. - 04:19 jup-xc az,el = +62 41 Tsys = 434 -> CONT.jup-xc.aste16.linux16.201602050419.LCK &ref(CONT.jup-xc.aste16.linux16.201602050419.png,,25%); Still neither Tsys nor CONT data on QLOOKC. A LCK file looks to be ok, but no plot. Why? /cosmos3/aste/etc/cont_inv.dat was changed from "ON" to "OFF". - 04:34 jup-xc az,el = +59 44 Tsys = 393 -> CONT.jup-xc.aste16.linux16.201602050434.LCK &ref(CONT.jup-xc.aste16.linux16.201602050434.png,,25%); The LCK file shows inverted profile. "ON" was recovered in /cosmos3/aste/etc/cont_inv.dat. [root@aste-1c rc3.d]# ls -l /cosmos3/aste/etc/cont_inv.dat -rw-r--r-- 1 astecntl astctl 3 Feb 5 04:41 /cosmos3/aste/etc/cont_inv.dat [root@aste-1c rc3.d]# cat /cosmos3/aste/etc/cont_inv.dat ON - 04:43 jup-xc az,el = +56 46 daz,del = -2.0 +1.0 Tsys = 392 -> CONT.jup-xc.aste16.linux16.201602050443 lp sc amplitude offset fwhm 00 x 2945.259 -3.615 +36.000 00 y 3005.998 +5.854 +36.774 01 x 2981.417 -3.775 +36.054 01 y 2967.076 +5.601 +35.043 &ref(CONT.jup-xc.aste16.linux16.201602050443plot0.png,,25%); &ref(CONT.jup-xc.aste16.linux16.201602050443plot1.png,,25%); Positive profile could be seen toward Jupiter and Load. We gave up QLOOKC and decided to go ahead without it. - 04:45 jup-rc Failed due to old observation table (blank in 'VREF'). - 04:47 jup-rc Failed due to full command buffer. Its workaround was to reduce the number of maps in a scan table. - 04:54 jup-rc &color(red){(done)}; az,el = +54 48 Tsys = 364, 337 -> CONT.jup-rc.aste16.linux16.201602050454.LCK &ref(CONT.jup-rc.aste16.linux16.201602050454.png,,25%); &ref(CONT.jup-rc.aste16.linux16.201602050454.ch0.png,,25%); number of maps -> 1 - 05:05 jup-sc &color(red){(done)}; az,el = 51,50 daz,del = -2.0 +1.0 Tsys: ? -> CONT.jup-sc.aste16.linux16.201602050506.LCK &ref(CONT.jup-sc.aste16.linux16.201602050506.png,,25%); &ref(CONT.jup-sc.aste16.linux16.201602050506.ch0.png,,25%); number of maps -> 1 2016/02/05 05:06:31 Temp. : -2.61 C Humid. : 63.67 % ( 3.21 hPa ) Solar : 0.00 kW/m2 Wind : 1.30 m/s 253 deg AirPressure : 572.28 hPa ( Rain: 0.02 ) Opacity @220 GHz : 0.1066 Current time = 2016/02/05 05:06:28 Aspirin time = 2016/02/05 05:06:27 Weather time = 2016/02/05 05:06:17 Aspirin Offset : (Az, El) = ( -7.20, 5.16 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK - 05:24 Tuning (I102-ch) az,el = -2 60 > asterx_set DASH345 LO Freq = 351.623580504 Pol0 = 291 , Pol1 = 285 Pol0 = 0.007099[A], Pol1 = 0.006956[A] Pol0 = 0.653908[V], Pol1 = 0.758440[V] > mmc1_rstop > ifeo_tune 1 0.030 16 dB 0.023786 V > ifeo_tune 2 0.050 13 dB 0.053859 V > mmc1_sstop > yfactor 1 R=0.025648 V, Sky=0.015367 V, Y=5.122432 dB > yfactor 2 R=0.051908 V, Sky=0.030079 V, Y=5.456457 dB - 05:35 Pointing (I102-ph) az,el = -5 60 daz,del = -2.0 +1.0 no update in QLOOKL. [root@aste-1c aste]# ./rc3.d/S99astqlsv stop [root@aste-1c aste]# ./rc3.d/S99astqlsv start [root@aste-mt1 asteobs]# /cosmos3/aste/rc3.d/S99astqllsv stop [root@aste-mt1 asteobs]# /cosmos3/aste/rc3.d/S99astqllsv start - 05:42 Pointing (I102-ph) Still no update in QLOOKL. asteobs@aste-1c:sudo /cosmos3/naoj/sbin/cos3_cntl restart - 05:45 Pointing (I102-ph) Still no update in QLOOKL. asteobs@aste-1c:sudo /cosmos3/naoj/sbin/cos3_cntl stop [root@aste-1c rc3.d]# ./S99astqllsv stop [root@aste-1c rc3.d]# ./S99astqlsv stop [root@aste-1c rc3.d]# ./S99astqlsv start [root@aste-1c rc3.d]# ./S99astqllsv start asteobs@aste-1c:sudo /cosmos3/naoj/sbin/cos3_cntl start - 05:52 Pointing (I102-ph) az,el = -13 53 daz,del = -2.0 +1.0 -> = +4.0 -1.0 Tsys: A2=406 A4=481 Ta*: A2=22 A4=19 -> I102-ph.160205055222.01.nqm Now spectra are plotted. Spurious signals at A2. - 06:05 I102-ch &color(red){(done)}; az,el = -18 52 daz,del = +4.0 -1.0 Tsys: A1=374 A4=452 Ta*: A1=~20 A4=~20 -> I102-ch.160205060514.01.nqm baseline subtraction: all: 1st-order polynomial function (fit ranges=[200,300],[700,800]ch) A1&ref(i1cha1l5a.png,,25%); A2&ref(i1cha2l5a.png,,25%); A3&ref(i1cha3l5a.png,,25%); A4&ref(i1cha4l5a.png,,25%); &br; &color(red){Spurious signals in A2}; 2016/02/05 06:08:24 Temp. : -3.01 C Humid. : 65.42 % ( 3.20 hPa ) Solar : 0.00 kW/m2 Wind : 2.65 m/s 253 deg AirPressure : 571.90 hPa ( Rain: 0.03 ) Opacity @220 GHz : 0.1416 Current time = 2016/02/05 06:08:20 Aspirin time = 2016/02/05 06:08:18 Weather time = 2016/02/05 06:08:13 Aspirin Offset : (Az, El) = ( 3.20, -1.55 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK - 06:13 I102-rh &color(red){(done)}; az,el = -21 52 daz,del = +4.0 -1.0 Tsys: A1=380 A4=456 -> I102-rh.IRC+10216.20160205061322.4.Y baseline subtraction: all: 1st-order polynomial function (fit ranges=[200,300],[700,800]ch) - 06:34 I102-sh &color(red){(done)}; az,el = -28 50 daz,del = +4.0 -1.0 Tsys: A1=399 A4=481 -> I102-sh.IRC+10216.20160205063420.4.Y baseline subtraction: all: 1st-order polynomial function (fit ranges=[200,300],[700,800]ch) -> I102-rh.IRC+10216.20160205061322.4.Y + I102-sh.IRC+10216.20160205063420.4.Y map: all: blc=[+57,-57] pix trc=[-57,+57] pix vel=-48.0~-4.0 km/s dra=3.0 arcsec ddec=3.0 arcsec dvel=4.0 km/s A1&ref(i1rsh1l5a_chmap.png,,25%); A3&ref(i1rsh3l5a_chmap.png,,25%); &br; A4&ref(i1rsh4l5a_chmap.png,,25%); &br; No map was created in A2 due to spurious signals. - 07:00 Tuning (I102-p2) az,el = -36 46 2016/02/05 07:00:54 Temp. : -2.76 C Humid. : 56.16 % ( 2.80 hPa ) Solar : 0.00 kW/m2 Wind : 1.66 m/s 229 deg AirPressure : 571.65 hPa ( Rain: 0.02 ) Opacity @220 GHz : 0.1205 Current time = 2016/02/05 07:00:50 Aspirin time = 2016/02/05 07:00:49 Weather time = 2016/02/05 07:00:43 Aspirin Offset : (Az, El) = ( 5.59, -0.89 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK > asterx_set DASH345 LO Freq = 350.943221952 > loatt_dash345 -p0 248 > loatt_dash345 -p1 226 Pol0 = 248 , Pol1 = 226 Pol0 = 0.006051[A], Pol1 = 0.005515[A] Pol0 = 0.646677[V], Pol1 = 0.745049[V] > whsf_tune S1USB S1LSB S2USB S2LSB ***Set ATT*** S1USB:ATT_old = 18.00 [dB] S1USB:ATT_new = 18.00 [dB] S1LSB:ATT_old = 18.50 [dB] S1LSB:ATT_new = 18.50 [dB] S2USB:ATT_old = 18.75 [dB] S2USB:ATT_new = 18.75 [dB] S2LSB:ATT_old = 16.75 [dB] S2LSB:ATT_new = 16.75 [dB] ***TPD voltage*** S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2 62.40 60.06 59.65 60.48 94.19 93.12 83.37 85.06 [mV] > whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2 ***Set ATT*** S1IFA:ATT_old = 6.50 [dB] S1IFA:ATT_new = 6.50 [dB] S1IFB:ATT_old = 6.00 [dB] S1IFB:ATT_new = 6.00 [dB] S2IFA:ATT_old = 5.50 [dB] S2IFA:ATT_new = 6.75 [dB] S2IFB:ATT_old = 6.75 [dB] S2IFB:ATT_new = 6.75 [dB] ***TPD voltage*** S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2 62.77 60.73 60.06 60.86 95.76 94.98 64.02 86.32 [mV] > whsf_rsky Result: R-SKY S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2 2.049 2.528 1.964 2.319 2.110 2.468 2.071 2.204 [dB] Result: Tsys[Tamb=293K] S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2 486.1 371.0 512.4 415.3 468.4 383.0 479.5 443.2 [K] > mmc1_rstop > whsf_stab 10 *** average *** S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2 62.3 60.3 59.9 60.6 94.4 93.8 89.3 85.4 [mV] *** stability *** S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2 0.20 0.32 0.32 0.23 0.52 0.60 2.85 0.50 [%] - 07:08 Pointing (I102-p2) az,el = -39 45 daz,del = +4.0 -1.0 -> +4.0 -1.0 Tsys: X3=379 X4=432 Ta*: X3=21 X4=24 -> I102-p2.160205070841.01.nqm 07:17:40 Tried to set ddEL=-1 but failed. Pointing offset is +1.0 at EL. So continued without applying it. - 07:20 I102-r2 &color(red){(done)}; az,el = -42 44 daz,del = +4.0 -1.0 Tsys: X3= X4= -> I102-r2.IRC+10216.20160205071958.6.Y baseline subtraction: X3: 2nd-order polynomial function (fit ranges=[480,500],[525,545]ch) X4: 2nd-order polynomial function (fit ranges=[480,500],[525,545]ch) - 2016/02/05 07:20:45 Temp. : -2.48 C Humid. : 46.01 % ( 2.34 hPa ) Solar : 0.00 kW/m2 Wind : 0.12 m/s 158 deg AirPressure : 571.58 hPa ( Rain: 0.02 ) Opacity @220 GHz : 0.0920 - Current time = 2016/02/05 07:20:41 Aspirin time = 2016/02/05 07:20:40 Weather time = 2016/02/05 07:20:39 Aspirin Offset : (Az, El) = ( 4.56, -1.38 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK - 07:46 I102-s2 &color(red){(done)}; az,el = -48 39 daz,del = +4.0 -1.0 Tsys: X3=398 X4=451 -> I102-s2.IRC+10216.20160205074554.6.Y baseline subtraction: X3: 2nd-order polynomial function (fit ranges=[480,500],[525,545]ch) X4: 2nd-order polynomial function (fit ranges=[480,500],[525,545]ch) -> I102-r2.IRC+10216.20160205071958.6.Y + I102-s2.IRC+10216.20160205074554.6.Y map: all: blc=[+57,-57] pix trc=[-57,+57] pix vel=-48.0~-4.0 km/s dra=3.0 arcsec ddec=3.0 arcsec dvel=4.0 km/s Bessel*Gauss=1, 2, (1.55, 2.52) X3&ref(i1rsx3l5a_chmap.png,,25%); X4&ref(i1rsx4l5a_chmap.png,,25%); &br; #br No line emission in X1 and X2. X4 and X5 are cross-correlation products.&br; &color(red){Under investigation}; - Debugging by Maekawa-san - 09:06 Tuning (jup-xc) az,el = -52 49 - 09:09 jupzd3 &color(red){(done)}; az,el = -52 49 daz,del = +4.0 -1.0 -> CONT.jupzd3.aste16.linux16.201602050910.LCK &ref(CONT.jupzd3.aste16.linux16.201602050910.png,,25%); - 09:13 jpsbd3a - 09:18 jpsbd3.list (batch) az,el = -54 daz,del = +4.0 -1.0 - 2016/02/05 09:20:02 Temp. : -4.48 C Humid. : 64.14 % ( 2.81 hPa ) Solar : 0.00 kW/m2 Wind : 1.61 m/s 256 deg AirPressure : 571.65 hPa ( Rain: 0.02 ) Opacity @220 GHz : 0.0945 - Current time = 2016/02/05 09:19:58 Aspirin time = 2016/02/05 09:19:57 Weather time = 2016/02/05 09:19:51 Aspirin Offset : (Az, El) = ( 4.14, -1.59 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK
