Diff of Observing Log/2010-05-10 - ASTE Observation Wiki

The added line is THIS COLOR.
The deleted line is THIS COLOR.
Observing Log/2010-05-10 has been deleted.
Deleting diff of Observing Log/2010-05-10
[[Observing Log]]
----
* 測定内容 [#a3f1a62a]
- 土星による副鏡位置測定


** 備考 [#yda272b6]



//===================================

* Observing from Nobeyama [#d7d5fecb]
- Observers: Hatsukade,Tamura,Miura, Sato

----

- UT 23:27 -- Pointing
--aste10/sbrf10/stsbc3a.start -->CONT_BE Error
--aste-w COSMOS3 restart

- UT 23:35 -- Pointing
--aste10/sbrf10/stsbc3a.start -->CONT_BE Error
--aste-1s COSMOS3 restart
--ASPIRIN Monのステータスがokにならない

- UT 0:46
-- aste-c1c restart
-- ast-1s COSMOS restart

- UT 01:09 -- Pointing
--Aspirin Mon復帰
--aste10/sbrf10/stsbc3a.start -->CONT_BE Error
  ERR CONT(911) Internal error (Semaphore)
  CONT_BRR :76 134 ERR CONT(911)
  Manager Fastal Error. out of order.
--  DASBOX restart
--　Start Observation→同様のエラーメッセージ
--  "Start Observation" times 3  →同様のエラーメッセージ
--   ログを見てエラーを探した、DABOXへの通信(と思われる経路)の確認、あと古いメールのチェック（どれも進展なし）by 塚越さん

- UT 1:30 
--  DASBOX restart
--  "Start Observation" times 2  →同様のエラーメッセージ


- UT 2:20頃　本日の観測は中止

- UT 3:30頃　塚越氏によりaste-2c reboot  --> トラブル回避できた模様。
共有メモリのアクセスが出来なくなっていたことが原因でした。

- UT 04:20 restarted observation.
-- Error "Can't get Tsys"
-- stopped observation. obstable=stsbc3e.start (30)
---changed ATT value
 asteobs@aste-2c% cont_if 3 12
 asteobs@aste-2c% cont_if 3 22


- UT 04:34  z-scanのみ行う
--aste10/sbrf10/satzc3.start (30)
--(Az,EL)=(-67,35)
--(X,Y,Z)=(5.81,-2.78,-4.94)
--(dAz,dEL)=(0,0)
--(dX,dY,dZ)=(0.0,0.0,0.0)
--weather conditions
    temp.= -6.27 deg., Humid. = 12.02 %, wind 7.10m/s, tau@220GHz=0.0576, Tsys=***K　(出力されず)

- UT 04:45
[[cont解析ページ:http://aste-www.mtk.nao.ac.jp/obslog_wiki/pukiwiki/index.php?cont]]にしたがって、解析
    > ssh aste10@aste-mx2 -X
    > source /home/common/etc/cshrc.csh
    > idl
    IDL> cont
    LCKファイルをエンディアン変換-> Channel Outoput -> Channel Analysisでtxtへ変換
    gnuplotなどで
    > set xlabel "z(mm)"
    > plot "filename.CH2' u ($0/10*0.16-3.0):($1-9500) w l

- UT 05:09  z-scanのみ行う
--aste10/sbrf10/satzc3.start
--(Az,EL)=(-73,28)
--(X,Y,Z)=(6.13,-2.78,-3.04)
--(dAz,dEL)=(0,0)
--(dX,dY,dZ)=(0.0,0.0,0.0)
--weather conditions
    temp.= -5.74 deg., Humid. = 10.76 %, wind 8.25 m/s, tau@220GHz=0.0355, Tsys=***K　(出力されず)
#ref(C005100434.C005100510.zplot.png)

- UT 05:23  dz=0mmでマップを作る *＊zのゼロ点が-1.3mmになっているのが正しいか確認**
--aste10/sbrf10/str2c3.start 
--(Az,EL)=(-75,24)
--(X,Y,Z)=(6.25,-2.78,-3.12)
--(dAz,dEL)=(0,0)
--(dX,dY,dZ)=(0.0,0.0,0.0)
--weather conditions
    temp.= -5.50 deg., Humid. = 10.28 %, wind 7.04 m/s, tau@220GHz=0.0328, **cant't get Tsys!!**
-- peak intensity 26.8 unit?
#ref(C0.png)

- UT 05:35  dz=-1.3mmでマップを作る
--aste10/sbrf10/str2c3.start 
--(Az,EL)=(-76,23)
--(X,Y,Z)=(6.30,-2.78,-3.15)
--(dAz,dEL)=(0,0)
--(dX,dY,dZ)=(0.0,0.0,-1.3)
--weather conditions
    temp.= -5.47 deg., Humid. = 10.19 %, wind 7.85 m/s, tau@220GHz=0.0422, **cant't get Tsys!!**
-- peak intensity 3.35 unit?
#ref(C-1.3.png)

- UT 05:48  dz=+1.3mmでマップを作る 
--aste10/sbrf10/str2c3.start 
--(Az,EL)=(-78,19)
--(X,Y,Z)=(6.41,-2.78,-1.94)
--(dAz,dEL)=(0,0)
--(dX,dY,dZ)=(0.0,0.0,+1.3)
--weather conditions
    temp.= -5.42 deg., Humid. = 9.61 %, wind 8.91 m/s, tau@220GHz=0.0551, **cant't get Tsys!!**
-- peak intensity 1.78 unit?
#ref(C+1.3.png)


- UT 06:27  
--aste10/sbrf10/satzc3.start 
--(Az,EL)=(-82,10)
--(X,Y,Z)=(6.57,-2.78,-1.94)
--(dAz,dEL)=(0,0)
--(dX,dY,dZ)=(0.0,0.0,0.0)
--weather conditions
    temp.= -6.10 deg., Humid. = 10.26 %, wind 10.13 m/s, tau@220GHz=0.0524, **cant't get Tsys!!**

- UT 06:31
--aste10/sbrf10/satzc3l.start 
     $ diff satzc3.star satzc3l.start
     < EXCUTE ANTENNA_G OFFSET(0,0) TYPE(ON) SPAN(00:01:40) SBRR_OFFSET((0,0,-3,0,0,0),(0,0,13,0,0))
     > EXCUTE ANTENNA_G OFFSET(0,0) TYPE(ON) SPAN(00:10:00) SBRR_OFFSET((0,0,-3,0,0,0),(0,0,13,0,0))
--(Az,EL)=(-82,9)
--(X,Y,Z)=(6.59,-2.78,-3.48)
--(dAz,dEL)=(0,0)
--(dX,dY,dZ)=(0.0,0.0,0.0)
--weather conditions
    temp.= -6.13 deg., Humid. = 10.24 %, wind 9.71 m/s, tau@220GHz=0.0337, **cant't get Tsys!!**


- UT 06:51
--aste10/sbrf10/satzc3s.start

- UT 08:34
-- aste-2c reboot (by T.Tsukagoshi)

- UT 08:50
--aste10/sbrf10/jpx5cc3.start 
--(Az,EL)=(82,26)
--(X,Y,Z)=(6.18,-2.78,-3.07)
--(dAz,dEL)=(0,0)
--(dX,dY,dZ)=(0.0,0.0,0.0)
--weather conditions
    temp.= -6.61 deg., Humid. = 8.00 %, wind 9.94 m/s, tau@220GHz=0.0229, **cant't get Tsys!!**

- UT 08:59
--aste10/sbrf10/jupzc3.start 
--(Az,EL)=(81,28)
--(X,Y,Z)=(6.13,-2.78,-5.14)
--(dAz,dEL)=(0,0)
--(dX,dY,dZ)=(0.0,0.0,0.0)
--weather conditions
    temp.= -6.58 deg., Humid. = 7.73 %, wind 10.42 m/s, tau@220GHz=0.0308, **cant't get Tsys!!**


- UT 09:39
--aste10/sbrf10/jupzc3.start 
--(Az,EL)=(86,37)
--(X,Y,Z)=(5.74,-2.78,-2.85)
--(dAz,dEL)=(0,0)
--(dX,dY,dZ)=(0.0,0.0,0.0)
--weather conditions
    temp.= -5.33 deg., Humid. = 6.61 %, wind 9.36 m/s, tau@220GHz=0.0273, **cant't get Tsys!!**


- UT 09:59
--aste10/sbrf10/jupzc3r.start 
     $ diff jupzc3.start jupzc3r.start 
     < EXCUTE ANTENNA_G OFFSET(0,0) TYPE(ON) SPAN(00:00:10) SBRR_OFFSET(0,0,-3,0,0,0)
     < EXCUTE ANTENNA_G OFFSET(0,0) TYPE(ON) SPAN(00:01:40) SBRR_OFFSET((0,0,-3,0,0,0),(0,0,13,0,0))
     > EXCUTE ANTENNA_G OFFSET(0,0) TYPE(ON) SPAN(00:01:40) SBRR_OFFSET(0,0,0,0,0,0)
     > EXCUTE ANTENNA_G OFFSET(0,0) TYPE(ON) SPAN(00:01:40) SBRR_OFFSET((0,0,0,0,0,0),(0,0,8,0,0))
     > EXCUTE ANTENNA_G OFFSET(0,0) TYPE(ON) SPAN(00:01:40) SBRR_OFFSET((0,0,8,0,0,0),(0,0,0,0,0))
--(Az,EL)=(86,37)
--(X,Y,Z)=(5.54,-2.78,-2.77)
--(dAz,dEL)=(0,0)
--(dX,dY,dZ)=(0.0,0.0,0.0)
--weather conditions
    temp.= -6.18 deg., Humid. = 6.77 %, wind 8.50 m/s, tau@220GHz=0.0437, **cant't get Tsys!!**


- UT 10:14
--aste10/sbrf10/jupzc3q.start 
     $ diff jupzc3.start jupzc3q.start 
     < EXCUTE ANTENNA_G OFFSET(0,0) TYPE(ON) SPAN(00:00:10) SBRR_OFFSET(0,0,-3,0,0,0)
     < EXCUTE ANTENNA_G OFFSET(0,0) TYPE(ON) SPAN(00:01:40) SBRR_OFFSET((0,0,-3,0,0,0),(0,0,13,0,0))
     > EXCUTE ANTENNA_G OFFSET(0,0) TYPE(ON) SPAN(00:00:05) SBRR_OFFSET(0,0,0,0,0,0)
     > EXCUTE ANTENNA_G OFFSET(0,0) TYPE(ON) SPAN(00:00:50) SBRR_OFFSET((0,0,0,0,0,0),(0,0,5,0,0))
--(Az,EL)=(70,45)
--(X,Y,Z)=(5.31,-2.78,1.67)
--(dAz,dEL)=(0,0)
--(dX,dY,dZ)=(0.0,0.0,0.0)
--weather conditions
    temp.= -6.24 deg., Humid. = 6.69 %, wind 7.23 m/s, tau@220GHz=0.0299, **cant't get Tsys!!**


- UT 10:39
--aste10/sbrf10/jpsbc3.batch
--(Az,EL)=(66,50)
--(X,Y,Z)=(5.00,-2.78,-2.60)
--(dAz,dEL)=(0,0)
--(dX,dY,dZ)=(0.0,0.0,0.0)
--weather conditions
    temp.= -6.21 deg., Humid. = 6.35 %, wind 8.57 m/s, tau@220GHz=0.0353, **cant't get Tsys!!**