![[PukiWiki]](http://www2.nao.ac.jp/~aste-www/aste_wiki/obs.jpg "[PukiWiki]")
[[Commissioning and Science Verification]] * Optical Pointing > Measurement [#td4a41ba] :Revision history| -- 2016-08-04 - modified for Linux COSMOS3 by Kamazaki,T. :Table of contents| #contents ---- ** Preparations [#r9b5c6dc] - &color(red){''antstat'' is unnecessary any more}; -- iOPT_r17shm communicates with COSMOS3 through shared memories and NOT files created by antstat. *** 1. ''Aspirin'' is running on aste-1c [#ze243485] - Aspirin's running can be confirmed by looking at the Aspirin Monitor window. Check the following three items. Current time = 2015/04/06 01:22:06 <--- The differences among these three times Aspirin time = 2015/04/06 01:22:04 <--- should be less than 60 seconds. Weather time = 2015/04/06 01:22:01 <--- Aspirin Offset : (Az, El) = ( 8.65, 4.62 ) Aspirin status : OK ( C22:on C6:OFF WIND:OFF) <--- should be "OK" and not "WIND_ON" Refraction Corr. status : OK <--- should be "OK" *** 2. (dAz, dEL) is (0.0, 0.0) [#he475ca7] - Confirm that dAz and dEl are 0.0s in the AZEL offset window. -- If they have some offsets, set ddAz and/or ddEL so that they become 0.0 in the AZEL offset window. *** 3. OPT image [#d2125685] - Check OPT images following the instructions in [[CSV/Optical pointing/Optical telescope setup/Focus adjustment>CSV/OpticalPointingOPTSetup#y0313ac6]] *** 4. Start iOPT on aste-c1c [#p1c121e4] - iOPT calculates pointing offsets from optical images and records their results to files. - Login to aste-c1c > ssh astecntl@aste-c1c - Confirm that no iOPT is running on aste-c1c astecntl@aste-cabin1c: ps -ef | grep iOPT | grep -v grep If nothing is displayed, go to the next step. If iOPT_r17shm exists, kill it. astecntl 4846 4806 38 23:57:49 pts/0 8:38 /cosmos3/naoj/sbinSol/iOPT_r17shm astecntl@aste-cabin1c: kill 4846 - Run iOPT in the directory of ~astecntl/optpon astecntl@aste-cabin1c: cd ~/optpon astecntl@aste-cabin1c: pwd /home/astecntl/optpon astecntl@aste-cabin1c: /cosmos3/naoj/sbinSol/iOPT_r17shm - Confirm "Antenna not ready" messages 天体に向くと毎秒10-15の測定値が流れる。 optonのdirectoryにyyyymmddhhmm.tabというlogging fileが生成される。 強制終了(CNTL&C)されるまで走っている。COSMOSで指示書を変えても同じlogging fileにデータが取得されるため、別のlogging fileにしたい場合は、一度強制終了して再度起動させる。 ** Measurements [#la55ac42] *** 1. Start measurements [#pd393280] - Start an observation table Group： asteXX Project： optXX ObsTable: select an observation table close to starting LST (e.g. L14h30m.start at LST14:40) -- Observation tables shall be updated every year so as to take account of proper motions of stars. -- An execution roughly runs for about 80 minutes. -- 測定の視野は＋－10秒角である (10.5秒とかの数値を表示したら、星像が視野の淵にいる。）星が全く見えない場合、星を長時間trackingする指示書を流して全視野撮像する(5へ) - Check pointing results flow while the antenna is tracking a star ... 0811 07:34:05 225+24B 70.9 75.1 -25.9 6.1 -26.408 37.211 0.0 -0.4 7 1 2 -0.2 0.3 0811 07:34:05 225+24B 70.3 88.7 -19.3 5.5 -26.408 37.211 -1.2 0.2 8 1 3 -0.5 0.3 ... (1) (2) (1): date (2): time ** Trouble Shooting [#v8d40608] - Cannot login to aste-c1c -- Visit [[Trouble Shooting]]. // End of the page
