History of CSV/OpticalPointingMeasurement(No. 7)

History
View the source.
CSV/OpticalPointingMeasurement has been deleted.
- 1 (2016-08-04 (Thu) 15:48:16)
- 2 (2016-08-04 (Thu) 17:41:18)
- 3 (2016-08-07 (Sun) 13:59:16)
- 4 (2016-08-07 (Sun) 19:46:24)
- 5 (2016-08-10 (Wed) 21:49:41)
- 6 (2016-08-11 (Thu) 11:13:36)
- 7 (2016-08-11 (Thu) 12:19:29)
- 8 (2016-08-12 (Fri) 10:04:05)

Commissioning and Science Verification

Optical Pointing > Measurement†

What's this page?: This page is prepared for optical pointing to determine global pointing parameters.

Revision history

2016-08-04 - modified for Linux COSMOS3 by Kamazaki,T.

Table of contents

Optical Pointing > Measurement

↑

Preparations†

antstat is unnecessary any more
- iOPT_r17shm communicates with COSMOS3 through shared memories and NOT files created by antstat.

↑

1. Aspirin is running on aste-1c†

Aspirin's running can be confirmed by looking at the Aspirin Monitor window. Check the following three items.

Current time = 2015/04/06 01:22:06    <--- The differences among these three times
Aspirin time = 2015/04/06 01:22:04    <--- should be less than 60 seconds.
Weather time = 2015/04/06 01:22:01    <---
Aspirin Offset : (Az, El) = (   8.65,   4.62 )
Aspirin status : OK ( C22:on  C6:OFF WIND:OFF)    <--- should be "OK" and not "WIND_ON"
Refraction Corr. status : OK                      <--- should be "OK"

↑

2. (dAz, dEL) is (0.0, 0.0)†

Confirm that dAz and dEl are 0.0s in the AZEL offset window.
- If they have some offsets, set ddAz and/or ddEL so that they become 0.0 in the AZEL offset window.

↑

3. OPT image†

Check OPT images following the instructions in CSV/Optical pointing/Optical telescope setup/Focus adjustment

↑

4. Start iOPT on aste-c1c†

iOPT calculates pointing offsets from optical images and records their results to files.
Login to aste-c1c
```
> ssh astecntl@aste-c1c
```

Confirm that no iOPT is running on aste-c1c

astecntl@aste-cabin1c: ps -ef | grep iOPT | grep -v grep
If nothing is displayed, go to the next step. If iOPT_r17shm exists, kill it.
astecntl  4846  4806 38 23:57:49 pts/0    8:38 /cosmos3/naoj/sbinSol/iOPT_r17shm
astecntl@aste-cabin1c: kill 4846

Run iOPT in the directory of ~astecntl/optpon

astecntl@aste-cabin1c: cd ~/optpon
astecntl@aste-cabin1c: pwd
/home/astecntl/optpon
astecntl@aste-cabin1c: /cosmos3/naoj/sbinSol/iOPT_r17shm

Confirm "Antenna not ready" messages

天体に向くと毎秒10-15の測定値が流れる。
optonのdirectoryにyyyymmddhhmm.tabというlogging fileが生成される。
強制終了(CNTL&C)されるまで走っている。COSMOSで指示書を変えても同じlogging fileにデータが取得されるため、別のlogging fileにしたい場合は、一度強制終了して再度起動させる。

↑

Measurements†

↑

1. Start measurements†

Start an observation table
```
Group：   asteXX
Project： optXX
ObsTable: select an observation table close to starting LST
          (e.g. L14h30m.start at LST14:40)
```
- Observation tables shall be updated every year so as to take account of proper motions of stars.
- An execution roughly runs for about 80 minutes.
- 測定の視野は＋－10秒角である (10.5秒とかの数値を表示したら、星像が視野の淵にいる。）星が全く見えない場合、星を長時間trackingする指示書を流して全視野撮像する(5へ)
Check pointing results flow while the antenna is tracking a star
```
xxx
(1) Time
(2)
```

↑

Trouble Shooting†

Cannot login to aste-c1c
- Visit Trouble Shooting.

History of CSV/OpticalPointingMeasurement (No. 7)