aste16@aste-ms1: ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}" -rw-r--r-- 1 astecntl astctl 771 Sep 10 09:38 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.160910 -rw-r--r-- 1 astecntl astctl 769 Sep 10 09:32 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.160910
Temperature: +1.2 C Humidity: 0.66 hPa Wind: 1.9 m/s (23 deg) 220GHz opacity: 0.037
[asteobs@aste-1c kisag]$ ls -l DASH3 BAND8 lrwxrwxrwx 1 astecntl astctl 12 Jun 3 2015 BAND8 -> BAND8.150603 lrwxrwxrwx 1 astecntl astctl 12 Jun 1 2015 DASH3 -> DASH3.150601 [astecntl@aste-1c kisag]$ ln -sf BAND8.160910 BAND8 [astecntl@aste-1c kisag]$ ln -sf DASH3.160910 DASH3 [astecntl@aste-1c kisag]$ ls -l DASH3 BAND8 lrwxrwxrwx 1 astecntl astctl 12 Sep 11 23:16 BAND8 -> BAND8.160910 lrwxrwxrwx 1 astecntl astctl 12 Sep 11 23:16 DASH3 -> DASH3.160910
[asteobs@aste-1c ~]$ ssh aste-c1c ssh: connect to host aste-c1c port 22: No route to host
Entering character/text Mode Escape character is ^]
[asteobs@aste-1c ~]$ tap_lt1500.py lantap0 1 off POS=100,100,100,100 POF1 POS=000,100,100,100 [asteobs@aste-1c ~]$ sleep 10 [asteobs@aste-1c ~]$ tap_lt1500.py lantap0 1 on POS=000,100,100,100 PON1 POS=100,100,100,100
[asteobs@aste-mx1 ~]$ ssh astecntl@aste-c1c /cosmos3/naoj/sbinSol/optinit device: [ ok ] mmap: [ ok ] init bcr: [ ok ] init: [ ok ] initLUT: [ ok ] clear FB: [ ok ] AVME-338B -> successfully initialized [aste16@aste-ms1 ~]$ ~/analysis/bin/optshot.sh r 1 128 * image plane = r -> offset=0 * # of frames = 1 * frame capture delay = 1 (sec) * fov = blc(192, 192) - trc(319, 319) 001 [2016-09-11T23:23:58]: max,min,mean,sdev = 99 31 59.291 7.211 -rw-r--r-- 1 aste16 astgrp 16384 Sep 11 23:24 /var/tmp/opt_aste16.raw -> 163-16C could be seen in the image
2016/09/11 23:25:43 Temp. : 1.15 C Humid. : 9.92 % ( 0.66 hPa ) Solar : 0.00 kW/m2 Wind : 1.90 m/s 23 deg AirPressure : 575.25 hPa ( Rain: 0.01 ) Opacity @220 GHz : 0.0366
Current time = 2016/09/11 23:25:53 Aspirin time = 2016/09/11 23:25:51 Weather time = 2016/09/11 23:25:38 Aspirin Offset : (Az, El) = ( 2.24, -10.26 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK
[asteobs@aste-1c ~]$ swbox_ctl_be CONT [asteobs@aste-1c ~]$ swbox_ctl_be status: swbox_ctl_be CONT
[asteobs@aste-1c ~]$ asterx_sw BAND8 ### After setting synthe ### FREQ = 13.509142460 [GHz] AMPL = 13.00 [dBm] RF = ON [asteobs@aste-1c ~]$ synthe_ctl B FREQ 11.444 ### After setting synthe ### FREQ = 11.444000000 [GHz] AMPL = 13.00 [dBm] RF = ON
[asteobs@aste-1c ~]$ asterx_set BAND8 ### Query of LO Freq ### LO Freq = 411.984000000 ### Set CLNA ### /cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 411.984000000 vd0=0.650000, id0=5.000000 vd1=0.600000, id1=4.500000 vd2=0.600000, id2=4.500000 ASTE FEMC:OPEN FEMC_TCP 8 Ver 0.91 > Program running. Do not turn off power to CAN nodes. ---------- 45 4C 01 08 00 E1nd at Node index 00 AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0 > SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50 OK > SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50 OK > SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50 OK > SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50 OK > GET_CLNA 0 1 0.654678,5.027313,-0.175568,0.604019,4.535065,-0.197937,0.604752,4.553833,-0.204742,1 > GET_CLNA 0 2 0.653809,5.040588,-0.195389,0.604324,4.559326,-0.195755,0.604080,4.556580,-0.203049,1 > GET_CLNA 1 1 0.654221,5.038147,-0.182907,0.604202,4.548035,-0.210236,0.604279,4.522705,-0.271378,1 > GET_CLNA 1 2 0.654221,5.018005,-0.170746,0.604630,4.555359,-0.193619,0.604340,4.513855,-0.200836,1 > CAN_CLOSE CAN closed ASTE FEMC:CLOSE ### Set Electro-magnet ### /cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 411.984000000 v=12.800000, 13.400000, 10.400000, 19.100000 ASTE FEMC:OPEN FEMC_TCP 8 Ver 0.91 > Program running. Do not turn off power to CAN nodes. ---------- 45 4C 01 08 00 E1nd at Node index 00 AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0 > ACT_DEMAG 0 1 30.00 1.00 100 OK > ACT_DEMAG 0 2 30.00 1.00 100 OK > ACT_DEMAG 1 1 30.00 1.00 100 OK > ACT_DEMAG 1 2 30.00 1.00 100 OK > SET_MAG_C 0 1 12.80 OK > SET_MAG_C 0 2 13.40 OK > SET_MAG_C 1 1 10.40 OK > SET_MAG_C 1 2 19.10 OK > GET_MAG_VC 0 1 0.170273,12.332535 > GET_MAG_VC 0 2 0.172043,12.925720 > GET_MAG_VC 1 1 0.135269,9.858322 > GET_MAG_VC 1 2 0.263474,18.743515 > CAN_CLOSE CAN closed ASTE FEMC:CLOSE ### Set SIS bias ### /cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 411.984000000 411.984000 2.001608 2.049580 1.996820 1.957012 ASTE FEMC:OPEN FEMC_TCP 8 Ver 0.91 > Program running. Do not turn off power to CAN nodes. ---------- 45 4C 01 08 00 E1nd at Node index 00 AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0 > SET_SIS_MODE 0 SET SIS MODE:CLOSE LOOP > SET_SIS_V 0 1 2.002 OK > SET_SIS_V 0 2 2.050 OK > SET_SIS_V 1 1 1.997 OK > SET_SIS_V 1 2 1.957 OK > GET_SIS_VC 0 1 1.911697,66.195679 > GET_SIS_VC 0 2 1.961594,55.599976 > GET_SIS_VC 1 1 1.916733,25.482178 > GET_SIS_VC 1 2 1.897583,976.937866 > CAN_CLOSE CAN closed ASTE FEMC:CLOSE ### Set LO Power ### /cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 411.984000000 v=1.828200, -0.300000, 2.500000, -0.350000 ASTE FEMC:OPEN FEMC_TCP 8 Ver 0.91 > Program running. Do not turn off power to CAN nodes. ---------- 45 4C 01 08 00 E1nd at Node index 00 AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0 > SET_PA_VD 0 1.83 OK > SET_PA_VG 0 -0.30 OK > SET_PA_VD 1 2.50 OK > SET_PA_VG 1 -0.35 OK > GET_PA 0 2.965851,247.573853,-0.291138 > GET_PA 1 4.022980,255.645752,-0.345459 > CAN_CLOSE CAN closed ASTE FEMC:CLOSE
[asteobs@aste-1c ~]$ swbox_ctl_pol 1 0 [asteobs@aste-1c ~]$ swbox_ctl_pol status: swbox_ctl_pol 1 0 400:P1-LSB 402:P0-LSB
[asteobs@aste-1c ~]$ cont_if 2 21 changed Cont IF #2 att. = 21 [dB] Cont IF #2 Lev. = -0.000103 [V] [asteobs@aste-1c ~]$ cont_if 3 23 changed Cont IF #3 att. = 0 [dB] Cont IF #3 Lev. = -0.000280 [V]
az,el = -89 65 daz,del = +3.0 +3.0 dx,dy,dz,dtx,dty,dtz = all 0.0s
az,el = -90 63 daz,del = +3.0 +3.0 -> -2.0 +4.0
az,el = -90 62 daz,del = -2.0 +4.0
[asteobs@aste-1c ~]$ ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8} lrwxrwxrwx 1 astecntl astctl 12 Sep 11 23:16 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.160910 lrwxrwxrwx 1 astecntl astctl 12 Sep 11 23:16 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.160910
2016/09/11 23:58:03 Temp. : -0.54 C Humid. : 11.05 % ( 0.65 hPa ) Solar : 0.00 kW/m2 Wind : 4.45 m/s 223 deg AirPressure : 575.29 hPa ( Rain: 0.01 ) Opacity @220 GHz : 0.0569
Current time = 2016/09/11 23:58:13 Aspirin time = 2016/09/11 23:58:12 Weather time = 2016/09/11 23:58:06 Aspirin Offset : (Az, El) = ( 3.86, -9.88 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK
az,el = -97 42
2016/09/12 01:07:59 Temp. : -2.48 C Humid. : 13.29 % ( 0.68 hPa ) Solar : 0.00 kW/m2 Wind : 6.02 m/s 271 deg AirPressure : 575.46 hPa ( Rain: 0.01 ) Opacity @220 GHz : 0.0272
Current time = 2016/09/12 01:08:07 Aspirin time = 2016/09/12 01:08:06 Weather time = 2016/09/12 01:07:58 Aspirin Offset : (Az, El) = ( 3.82, -6.36 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK
az,el = -104 19 daz,del = -2 4
2016/09/12 02:52:51 Temp. : -1.36 C Humid. : 4.55 % ( 0.25 hPa ) Solar : 0.00 kW/m2 Wind : 2.01 m/s 128 deg AirPressure : 574.95 hPa ( Rain: 0.01 ) Opacity @220 GHz : 0.0062
Current time = 2016/09/12 02:52:53 Aspirin time = 2016/09/12 02:52:52 Weather time = 2016/09/12 02:52:41 Aspirin Offset : (Az, El) = ( 7.26, 5.62 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK
az,el = -50 60
[asteobs@aste-1c ~]$ asterx_set BAND8 ### Query of LO Freq ### LO Freq = 466.888839912 ### Set CLNA ### /cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 466.888839912 vd0=0.650000, id0=5.000000 vd1=0.600000, id1=4.500000 vd2=0.600000, id2=4.500000 ASTE FEMC:OPEN FEMC_TCP 8 Ver 0.91 > Program running. Do not turn off power to CAN nodes. ---------- 45 4C 01 08 00 E1nd at Node index 00 AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0 > SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50 OK > SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50 OK > SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50 OK > SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50 OK > GET_CLNA 0 1 0.654541,5.028534,-0.174820,0.604004,4.535980,-0.197174,0.604675,4.544678,-0.203949,1 > GET_CLNA 0 2 0.653763,5.039062,-0.194717,0.604324,4.560242,-0.195114,0.604095,4.552917,-0.202454,1 > GET_CLNA 1 1 0.654129,5.038147,-0.182556,0.604248,4.548035,-0.209915,0.604202,4.517365,-0.271149,1 > GET_CLNA 1 2 0.654358,5.018616,-0.170593,0.604691,4.553528,-0.193375,0.604385,4.515839,-0.200485,1 > CAN_CLOSE CAN closed ASTE FEMC:CLOSE ### Set Electro-magnet ### /cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 466.888839912 v=12.800000, 13.400000, 13.800000, 19.100000 ASTE FEMC:OPEN FEMC_TCP 8 Ver 0.91 > Program running. Do not turn off power to CAN nodes. ---------- 45 4C 01 08 00 E1nd at Node index 00 AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0 > ACT_DEMAG 0 1 30.00 1.00 100 OK > ACT_DEMAG 0 2 30.00 1.00 100 OK > ACT_DEMAG 1 1 30.00 1.00 100 OK > ACT_DEMAG 1 2 30.00 1.00 100 OK > SET_MAG_C 0 1 12.80 OK > SET_MAG_C 0 2 13.40 OK > SET_MAG_C 1 1 13.80 OK > SET_MAG_C 1 2 19.10 OK > GET_MAG_VC 0 1 0.170563,12.320709 > GET_MAG_VC 0 2 0.170410,12.918472 > GET_MAG_VC 1 1 0.180359,13.241577 > GET_MAG_VC 1 2 0.261795,18.737411 > CAN_CLOSE CAN closed ASTE FEMC:CLOSE ### Set SIS bias ### /cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 466.888839912 466.888840 1.797500 1.785277 1.762723 1.766723 ASTE FEMC:OPEN FEMC_TCP 8 Ver 0.91 > Program running. Do not turn off power to CAN nodes. ---------- 45 4C 01 08 00 E1nd at Node index 00 AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0 > SET_SIS_MODE 0 SET SIS MODE:CLOSE LOOP > SET_SIS_V 0 1 1.798 OK > SET_SIS_V 0 2 1.785 OK > SET_SIS_V 1 1 1.763 OK > SET_SIS_V 1 2 1.767 OK > GET_SIS_VC 0 1 1.706924,104.724121 > GET_SIS_VC 0 2 1.699219,103.628540 > GET_SIS_VC 1 1 1.686554,47.860718 > GET_SIS_VC 1 2 1.675949,778.332520 > CAN_CLOSE CAN closed ASTE FEMC:CLOSE ### Set LO Power ### /cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 466.888839912 v=1.300000, -0.300000, 2.500000, -0.350000 ASTE FEMC:OPEN FEMC_TCP 8 Ver 0.91 > Program running. Do not turn off power to CAN nodes. ---------- 45 4C 01 08 00 E1nd at Node index 00 AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0 > SET_PA_VD 0 1.30 OK > SET_PA_VG 0 -0.30 OK > SET_PA_VD 1 2.50 OK > SET_PA_VG 1 -0.35 OK > GET_PA 0 2.108002,208.496094,-0.290833 > GET_PA 1 4.022369,241.821289,-0.345612 > CAN_CLOSE CAN closed ASTE FEMC:CLOSE [asteobs@aste-1c ~]$
[asteobs@aste-1c ~]$ mmc1_rstop [asteobs@aste-1c ~]$ ifeo_tune 1 0.030 16 dB 0.020869 V [asteobs@aste-1c ~]$ ifeo_tune 2 0.050 16 dB 0.043618 V
[asteobs@aste-1c ~]$ mmc1_sstop [asteobs@aste-1c ~]$ yfactor 1 R=0.030207 V, Sky=0.016851 V, Y=2.534819 dB 2.534819
[asteobs@aste-1c ~]$ mmc1_rstop [asteobs@aste-1c ~]$ ifeo 1 E/O att. = 16 dB E/O IF level = 0.017645 V <---*** [asteobs@aste-1c ~]$ ifeo 1 E/O att. = 16 dB E/O IF level = 0.032223 V [asteobs@aste-1c ~]$ ifeo 1 E/O att. = 16 dB E/O IF level = 0.033162 V [asteobs@aste-1c ~]$ ifeo 1 E/O att. = 16 dB E/O IF level = 0.032210 V [asteobs@aste-1c ~]$ ifeo 1 E/O att. = 16 dB E/O IF level = 0.033844 V [asteobs@aste-1c ~]$ ifeo 1 E/O att. = 16 dB E/O IF level = 0.031044 V [asteobs@aste-1c ~]$ ifeo 1 E/O att. = 16 dB E/O IF level = 0.023682 V <---*** [asteobs@aste-1c ~]$ ifeo 1 E/O att. = 16 dB E/O IF level = 0.031821 V [asteobs@aste-1c ~]$ ifeo 1 E/O att. = 16 dB E/O IF level = 0.032577 V [asteobs@aste-1c ~]$ ifeo 1 E/O att. = 16 dB E/O IF level = 0.032076 V
[asteobs@aste-1c ~]$ yfactor 2 R=0.046909 V, Sky=0.033486 V, Y=1.463929 dB 1.463929
[asteobs@aste-1c ~]$ swbox_ctl_be CONT [asteobs@aste-1c ~]$ swbox_ctl_be status: swbox_ctl_be CONT [asteobs@aste-1c ~]$ swbox_ctl_pol status: swbox_ctl_pol 1 0 400:P1-LSB 402:P0-LSB
[asteobs@aste-1c ~]$ cont_if 2 21 changed Cont IF #2 att. = 21 [dB] Cont IF #2 Lev. = -0.000290 [V] [asteobs@aste-1c ~]$ cont_if 3 21 changed Cont IF #3 att. = 0 [dB] Cont IF #3 Lev. = -0.000799 [V]
/home/aste16/ast0120/continuum/data/CONT.stx5b8.aste16.ast0120.201609120438.LCK /home/aste16/ast0120/continuum/data/CONT.stx5b8.aste16.ast0120.201609120441.LCK
[asteobs@aste-1c ~]$ asterx_set BAND8 ### Query of LO Freq ### LO Freq = 466.888725396 ### Set CLNA ### /cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 466.888725396 vd0=0.650000, id0=5.000000 vd1=0.600000, id1=4.500000 vd2=0.600000, id2=4.500000 ASTE FEMC:OPEN FEMC_TCP 8 Ver 0.91 > Program running. Do not turn off power to CAN nodes. ---------- 45 4C 01 08 00 E1nd at Node index 00 AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0 > SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50 OK > SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50 OK > SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50 OK > SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50 OK > GET_CLNA 0 1 0.654602,5.026703,-0.174896,0.604050,4.529724,-0.197266,0.604630,4.550476,-0.203888,1 > GET_CLNA 0 2 0.653763,5.039673,-0.194733,0.604294,4.559479,-0.195145,0.604126,4.550171,-0.202332,1 > GET_CLNA 1 1 0.654083,5.035095,-0.182632,0.604202,4.551086,-0.209839,0.604233,4.523163,-0.271011,1 > GET_CLNA 1 2 0.654236,5.017090,-0.170456,0.604752,4.552155,-0.193344,0.604492,4.515686,-0.200348,1 > CAN_CLOSE CAN closed ASTE FEMC:CLOSE ### Set Electro-magnet ### /cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 466.888725396 v=12.800000, 13.400000, 13.800000, 19.100000 ASTE FEMC:OPEN FEMC_TCP 8 Ver 0.91 > Program running. Do not turn off power to CAN nodes. ---------- 45 4C 01 08 00 E1nd at Node index 00 AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0 > ACT_DEMAG 0 1 30.00 1.00 100 OK > ACT_DEMAG 0 2 30.00 1.00 100 OK > ACT_DEMAG 1 1 30.00 1.00 100 OK > ACT_DEMAG 1 2 30.00 1.00 100 OK > SET_MAG_C 0 1 12.80 OK > SET_MAG_C 0 2 13.40 OK > SET_MAG_C 1 1 13.80 OK > SET_MAG_C 1 2 19.10 OK > GET_MAG_VC 0 1 0.170639,12.318039 > GET_MAG_VC 0 2 0.169830,12.917709 > GET_MAG_VC 1 1 0.180832,13.240051 > GET_MAG_VC 1 2 0.261948,18.734741 > CAN_CLOSE CAN closed ASTE FEMC:CLOSE ### Set SIS bias ### /cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 466.888725396 466.888725 1.797500 1.785276 1.762724 1.766724 ASTE FEMC:OPEN FEMC_TCP 8 Ver 0.91 > Program running. Do not turn off power to CAN nodes. ---------- 45 4C 01 08 00 E1nd at Node index 00 AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0 > SET_SIS_MODE 0 SET SIS MODE:CLOSE LOOP > SET_SIS_V 0 1 1.798 OK > SET_SIS_V 0 2 1.785 OK > SET_SIS_V 1 1 1.763 OK > SET_SIS_V 1 2 1.767 OK > GET_SIS_VC 0 1 1.702652,104.757690 > GET_SIS_VC 0 2 1.698761,103.536987 > GET_SIS_VC 1 1 1.684113,47.753906 > GET_SIS_VC 1 2 1.657333,846.234131 > CAN_CLOSE CAN closed ASTE FEMC:CLOSE ### Set LO Power ### /cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 466.888725396 v=1.300000, -0.300000, 2.500000, -0.350000 ASTE FEMC:OPEN FEMC_TCP 8 Ver 0.91 > Program running. Do not turn off power to CAN nodes. ---------- 45 4C 01 08 00 E1nd at Node index 00 AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0 > SET_PA_VD 0 1.30 OK > SET_PA_VG 0 -0.30 OK > SET_PA_VD 1 2.50 OK > SET_PA_VG 1 -0.35 OK > GET_PA 0 2.107697,208.328247,-0.290985 > GET_PA 1 4.022217,241.790771,-0.345764 > CAN_CLOSE CAN closed ASTE FEMC:CLOSE
[asteobs@aste-1c ~]$ mmc1_rstop [asteobs@aste-1c ~]$ ifeo_tune 1 0.030 16 dB 0.038495 V [asteobs@aste-1c ~]$ ifeo_tune 2 0.050 16 dB 0.041758 V
[asteobs@aste-1c ~]$ mmc1_sstop [asteobs@aste-1c ~]$ yfactor 1 R=0.027155 V, Sky=0.022780 V, Y=0.762961 dB 0.762961 [asteobs@aste-1c ~]$ yfactor 2 R=0.045430 V, Sky=0.032401 V, Y=1.467843 dB 1.467843 [asteobs@aste-1c ~]$
[asteobs@aste-1c ~]$ swbox_ctl_pol status: swbox_ctl_pol 1 0 400:P1-LSB 402:P0-LSB
daz,del -> -1.0 +6.0 Tsys A[3,4] = 812.7 851.4
#ref(): File not found: "A1(P1L).png" at page "Observing Log/2016-09-12"
#ref(): File not found: "A4(P0L).png" at page "Observing Log/2016-09-12"
az,el = -70 43 daz,del = -1.0 +6.0 dx,dy,dz,dtx,dty,dtz = all 0.0s Tsys A[3,4]= 887 922
2016/09/12 05:45:15 Temp. : -0.03 C Humid. : 3.82 % ( 0.23 hPa ) Solar : 0.00 kW/m2 Wind : 0.21 m/s 12 deg AirPressure : 574.05 hPa ( Rain: 0.01 ) Opacity @220 GHz : 0.0514
Current time = 2016/09/12 05:45:16 Aspirin time = 2016/09/12 05:45:15 Weather time = 2016/09/12 05:45:06 Aspirin Offset : (Az, El) = ( 3.99, -10.15 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK
az,el = -76 34 Tsys A[3,4] = 966 1010
#ref(): File not found: "EPAqr-A3on.png" at page "Observing Log/2016-09-12"
#ref(): File not found: "EPAqr-A4on.png" at page "Observing Log/2016-09-12"
az,el = +33 67 daz,del = -1.0 +6.0 -> -2.0 +7.0 Tsys A[3,4] = 681.9 708.7
az,el = +28 daz,del = -2.0 +7.0 Tsys A[3,4] = 691 722
2016/09/12 06:45:14 Temp. : -3.32 C Humid. : 4.27 % ( 0.20 hPa ) Solar : 0.00 kW/m2 Wind : 4.49 m/s 164 deg AirPressure : 573.42 hPa ( Rain: 0.01 ) Opacity @220 GHz : 0.0631
Current time = 2016/09/12 06:45:15 Aspirin time = 2016/09/12 06:45:15 Weather time = 2016/09/12 06:45:13 Aspirin Offset : (Az, El) = ( -6.35, -6.30 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK
az,el = -26 68 Tsys A[3,4] = 692 723
2016/09/12 08:04:18 Temp. : -0.70 C Humid. : 3.05 % ( 0.18 hPa ) Solar : 0.00 kW/m2 Wind : 1.79 m/s 291 deg AirPressure : 573.08 hPa ( Rain: 0.01 ) Opacity @220 GHz : 0.0370
Current time = 2016/09/12 08:04:25 Aspirin time = 2016/09/12 08:04:24 Weather time = 2016/09/12 08:04:13 Aspirin Offset : (Az, El) = ( 3.49, -9.70 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK
az,el = -29 67 Tsys A[3,4] = 685 718
az,el = -61 64 Tsys A[3,4] = 675 704
2016/09/12 08:34:03 Temp. : -1.65 C Humid. : 3.32 % ( 0.18 hPa ) Solar : 0.00 kW/m2 Wind : 6.84 m/s 317 deg AirPressure : 573.04 hPa ( Rain: 0.01 ) Opacity @220 GHz : 0.0483
Current time = 2016/09/12 08:34:06 Aspirin time = 2016/09/12 08:34:05 Weather time = 2016/09/12 08:33:58 Aspirin Offset : (Az, El) = ( 12.09, 2.33 ) Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on ) Refraction Corr. status : OK