History of Observing Log/2016-09-10(No. 5)

History
View the source.
Observing Log/2016-09-10 has been deleted.
- 1 (2016-09-10 (Sat) 08:27:44)
- 2 (2016-09-10 (Sat) 11:20:37)
- 3 (2016-09-10 (Sat) 17:59:44)
- 4 (2016-09-10 (Sat) 20:09:44)
- 5 (2016-09-11 (Sun) 08:43:05)

Observing Log

CSV2016: Long time integration in DASH345/BAND8 (2016-09-10)
FMLO Commissioning from SPdA

CSV2016: Long time integration in DASH345/BAND8 (2016-09-10)†

↑

Tasks†

Long time integration in DASH345/BAND8

↑

Preparations†

Basic checks

Record which kisa files are used for DASH345 and BAND8

aste16@aste-ms1: ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
lrwxrwxrwx 1 astecntl astctl 12 Jun  3  2015 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.150603
lrwxrwxrwx 1 astecntl astctl 12 Jun  1  2015 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.150601

Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
Check Aspirin is working in the "WIND" mode

Tuning at EL=60.0 deg
- Tuning of DASH345/BAND8 for continuum observations
- Don't forget to record weather conditions

↑

Information†

Observers: Kamazaki
Site: Mitaka

Weather conditions (2016-09-09UT23:25)

Temperature: -1.6 C
Humidity: 0.37 hPa
Wind: 3.9 m/s (195 deg)
220GHz opacity: 0.063

↑

Preparations†

Basic checks

Kisa files for DASH345 and BAND8

[asteobs@aste-mt1 ~]$ ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
lrwxrwxrwx 1 astecntl astctl 12 Jun  3  2015 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.150603
lrwxrwxrwx 1 astecntl astctl 12 Jun  1  2015 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.150601

Confirmed all subref parameters (dx,dy,dz,dtx,dty,dtz) were 0.0s
Confirmed Aspirin was in the "WIND" mode

↑

Long time integration†

Tuning at EL=60.0 deg (aste16/linux16/tEPC3ph.start)

2016/09/09 23:25:13
 Temp. :   1.62 C   Humid. :  5.45 % (  0.37 hPa )   Solar :  0.00 kW/m2
 Wind  :   3.87 m/s  195 deg   AirPressure : 573.77 hPa    ( Rain:  0.01 )
 Opacity @220 GHz :   0.0630

Current time = 2016/09/09 23:25:21
Aspirin time = 2016/09/09 23:25:20
Weather time = 2016/09/09 23:25:14
Aspirin Offset : (Az, El) = (  12.76,   0.87 )
Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
Refraction Corr. status : OK

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.633622608
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.633622608
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.204895,10.052185,-0.278030,0.003220,0.012665,4.909882,0.003586,0.022888,4.909790,1
> GET_CLNA 0 2 
1.204971,10.052032,-0.381439,0.003189,0.023346,-4.847900,0.004105,0.022125,4.909805,1
> GET_CLNA 1 1 
1.205856,10.051727,-0.795853,0.003174,0.021362,-4.881943,0.003204,0.024109,-4.881958,1
> GET_CLNA 1 2 
1.206558,10.094910,-0.301758,0.003662,0.018921,-4.881973,0.003403,0.013123,4.931473,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.633622608
351.633623 1.900000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.900 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.789017,43.161011
> GET_SIS_VC 0 2 
1.790466,30.383301
> GET_SIS_VC 1 1 
1.811600,46.865845
> GET_SIS_VC 1 2 
1.819382,33.923340
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.633622608
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.633622608
/cosmos3/naoj/bin/loatt_dash345 291 285
Set ATT     : Pol0=291, Pol1=285
 Pol0 =      291   , Pol1 =      285
 Pol0 = 0.007101[A], Pol1 = 0.006956[A]
 Pol0 = 0.669497[V], Pol1 = 0.769017[V]
[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20160909t234155z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20160909t234155z open_mmc('mmc1:8501'): socket '4' connect success.
20160909t234155z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20160909t234155z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20160909t234156z mmc1 r reset_all.
mmc is active
20160909t234156z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20160909t234158z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20160909t234158z close_mmc(): socket '4' closed.
20160909t234158z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
14 dB  0.038169 V
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
16 dB  0.056037 V

for CONT

[asteobs@aste-1c ~]$ swbox_ctl_be CONT
[asteobs@aste-1c ~]$ swbox_ctl_be     
status: swbox_ctl_be CONT
[asteobs@aste-1c ~]$ cont_if 2 22
changed Cont IF #2 att. = 22 [dB]
Cont IF #2 Lev. = 0.000097 [V]
[asteobs@aste-1c ~]$ cont_if 3 17
Cont IF #3 Att. = 0 [dB]
changed Cont IF #3 att. = 0 [dB]
Cont IF #3 Lev. = -0.000270 [V]

UT23:45 aste16/radpon/istx3d3.start

az,el = -90 62
daz,del = 0.0 0.0
dx,dy,dz,dtx,dty,dtz = all 0.0s

Confirm jagged patterns in DASH345 LSB at LO=351.633622608 GHz

[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 1 0
400:P1-LSB	402:P0-LSB

Such patterns cannot be seen in USB

[asteobs@aste-1c ~]$ swbox_ctl_pol 0 1
400:P0-USB	402:P1-USB

UT23:58 Pointing (aste16/linux16/tEPC3ph.start)

az,el = +72 42
daz,del = 0.0 0.0 -> +1.0 +4.0
dx,dy,dz,dtx,dty,dtz = all 0.0s

UT00:14 aste16/linux16/tEPC3ch.start

az,el = +69 45
daz,del = +1.0 +4.0

A[1,2] = P1L
A[3,4] = P0L
Tsys [A1-4] = 217 233 135 142

UT00:55 Tuning (aste16/linux16/tEPC3ci.start)

az,el = 60 53
daz,del = +1.0 +4.0

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
16 dB  0.025675 V
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
15 dB  0.041926 V

UT00:57 aste16/linux16/tEPC3ci.start

A[1,2] = P0U
A[3,4] = P1U
Tsys [A1-4] = 165 180 230 243

UT01:25

Tsys [A1-4] = 190.9 210.4 229.0 241.4

2016/09/10 01:23:12
 Temp. :  -0.27 C   Humid. :  6.37 % (  0.38 hPa )   Solar :  0.00 kW/m2
 Wind  :   3.03 m/s  270 deg   AirPressure : 574.36 hPa    ( Rain:  0.01 )
 Opacity @220 GHz :   0.0513

Current time = 2016/09/10 01:23:15
Aspirin time = 2016/09/10 01:23:14
Weather time = 2016/09/10 01:23:04
Aspirin Offset : (Az, El) = ( -10.94,  -1.84 )
Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
Refraction Corr. status : OK

UT01:24 Tuning (aste16/linux16/tEPC3ph.start)

az,el = +52 59

[asteobs@aste-1c ~]$ mmc1_rstop
[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
16 dB  0.021634 V
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
16 dB  0.048905 V

[asteobs@aste-1c ~]$ yfactor 1
R=0.023968 V,  Sky=0.011217 V, Y=3.297551 dB
3.297551
[asteobs@aste-1c ~]$ yfactor 2
R=0.051465 V,  Sky=0.019317 V, Y=4.255723 dB
4.255723

UT01:29 Pointing (aste16/linux16/tEPC3ph.start)

az,el = +50 60
daz,del = +1.0 +4.0 -> +3.0 +3.0

UT01:40 aste16/linux16/tEPC3rh.start

az,el = +46 62
daz,del = +3.0 +3.0
Tsys [A1-4] = 179.6 200.5 131.2 137.6

2016/09/10 01:44:23
 Temp. :   0.58 C   Humid. :  6.02 % (  0.38 hPa )   Solar :  0.00 kW/m2
 Wind  :   3.38 m/s  324 deg   AirPressure : 574.48 hPa    ( Rain:  0.01 )
 Opacity @220 GHz :   0.0454

Current time = 2016/09/10 01:44:25
Aspirin time = 2016/09/10 01:44:23
Weather time = 2016/09/10 01:44:18
Aspirin Offset : (Az, El) = ( -10.41,  -4.78 )
Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
Refraction Corr. status : OK

UT01:54 aste16/linux16/tEPC3sh.start

az,el = +40 64
Tsys [A1-4] = 184.7 203.6 170.7 181.0

UT02:19 aste16/linux16/tEPC3rh.start

az,el = +27 67
Tsys [A1-4] = 187.4 207.2 148.6 156.4|

UT02:35 aste16/linux16/tEPC3rh.start

az,el = +17 68
Tsys [A1-4] = 184.7 206.9 142.4 150.1

[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 1 0
400:P1-LSB	402:P0-LSB

UT03:03 aste16/linux16/tEPC3sh.start

az,el = -2 69
Tsys [A1-4] = 187.8 207.4 187.6 199.6

UT03:31 aste16/linux16/tEPC3rh.start

az,el = -21 68
daz,del = +3.0 +3.0
Tsys [A1-4] = 184.2 203.6 145.1 153.5

↑

New pointing models†

These files will be applied on JST2016-09-12T08:00

DASH345 : DASH3.160910

[astecntl@aste-1c kisag]$ diff DASH3.160910 DASH3.150601
3c3
< P2:(A2+C1)    = -0.0649453
---
> P2:(A2+C1)    = -0.0652523
7,9c7,9
< P6:(B3+D0+F3+G2+C2) = -0.0331409
< P7:(D1-H5)    = 0.0103137
< P8:(D2+H6)    = 0.0587569
---
> P6:(B3+D0+F3+G2+C2) = -0.0314649
> P7:(D1-H5)    = 0.0112157
> P8:(D2+H6)    = 0.0564049

#ref(): File not found: "pon-dash3_20160910.png" at page "Observing Log/2016-09-10"

BAND8 : BAND8.160910

[astecntl@aste-1c kisag]$ diff BAND8.160910 BAND8.150603 
7c7
< P6:(B3+D0+F3+G2+C2) = 0.030315
---
> P6:(B3+D0+F3+G2+C2) = 0.030808

#ref(): File not found: "pon-band8_20160910.png" at page "Observing Log/2016-09-10"

↑

FMLO Commissioning from SPdA†

21:21 UTC - START TUNING for the pointing source
- aste16/fmlo16/mGCpt43.tune
- Az, El = 119, 67 deg

[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 466.844829516
...

[asteobs@aste-1c ~]$ mmc1_rstop

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 16 dB      E/O att. = 16 dB    IF level=0.034600
new E/O att. = 16 dB    IF level=0.033475
new E/O att. = 18 dB    IF level=-0.001753
new E/O att. = 16 dB    IF level=0.040060
16 dB  0.040060 V <- OK (AT comment)

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 16 dB    IF level=0.044978
new E/O att. = 16 dB    IF level=0.044903
new E/O att. = 15 dB    IF level=0.058899
new E/O att. = 16 dB    IF level=0.042297
16 dB  0.042297 V <- OK (AT comment)

[asteobs@aste-1c ~]$ mmc1_sstop

[asteobs@aste-1c ~]$ yfactor 1
    E/O att. = 16 dB
 E/O IF level = 0.022344 V
R=0.024717 V,  Sky=0.022344 V, Y=0.438348 dB
0.438348 <- not so good (AT comment)

[asteobs@aste-1c ~]$ yfactor 2
    E/O att. = 16 dB
 E/O IF level = 0.029668 V
R=0.044111 V,  Sky=0.029668 V, Y=1.722586 dB
1.722586 <- moderately good (AT comment)

21:30 UTC - START TUNING again

21:32 UTC - Pointing for GC

aste16/fmlo16/mGCpt43.start
Az, El = 121, 70 deg

Tsys = 840 K (A1), 653 K (A3)

 Temp. :   6.86 C   Humid. :  5.36 % (  0.53 hPa )   Solar :  0.15 kW/m2
 Wind  :  10.08 m/s  255 deg   AirPressure : 575.09 hPa    ( Rain:  0.01 )
 Opacity @220 GHz :   0.0157

CO(4-3) is not detected
- Expected intensity Ta* = 0.9 K, while noise level is ~ 1K
- so it is not surprising if we don't detect the line
- -> quitting and moving on to GC tables

21:40 UTC - START TUNING for the target (GC's [CI])
- aste16/fmlo16/mGCmpx1.tune
- Az, El = 112, 71 deg

[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 486.329845464
...

[asteobs@aste-1c ~]$ mmc1_rstop

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 16 dB      E/O att. = 16 dB    IF level=0.010399
new E/O att. = 16 dB    IF level=0.010453
new E/O att. = 14 dB    IF level=0.015737
new E/O att. = 12 dB    IF level=0.023257
new E/O att. = 10 dB    IF level=0.035205
new E/O att. = 12 dB    IF level=0.019737
new E/O att. = 10 dB    IF level=0.034955
10 dB  0.034955 V <- OK (AT comment)

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 16 dB    IF level=0.017955
new E/O att. = 16 dB    IF level=0.018164
new E/O att. = 15 dB    IF level=0.025259
new E/O att. = 14 dB    IF level=0.028785
new E/O att. = 13 dB    IF level=0.037883
new E/O att. = 12 dB    IF level=0.049826
new E/O att. = 11 dB    IF level=0.058354
new E/O att. = 12 dB    IF level=0.042982
12 dB  0.042982 V <- OK (AT comment)

[asteobs@aste-1c ~]$ mmc1_sstop

[asteobs@aste-1c ~]$ yfactor 1
    E/O att. = 10 dB
 E/O IF level = 0.024490 V
R=0.032430 V,  Sky=0.024490 V, Y=1.219582 dB
1.219582 <- moderately good (AT comment)

[asteobs@aste-1c ~]$ yfactor 2
    E/O att. = 12 dB
 E/O IF level = 0.037310 V
R=0.043287 V,  Sky=0.037310 V, Y=0.645322 dB
0.645322 <- not so good (AT commment)

21:49 UTC - START TUNING again

21:50 UTC - FMLO mapping of region 1

aste16/fmlo16/mGCmpx1.start
Az, El = 117, 74 deg

Tsys = 1330 K (A1), 829 K (A2), 1123 K (A3)

 Temp. :   6.10 C   Humid. :  5.52 % (  0.52 hPa )   Solar :  0.08 kW/m2
 Wind  :   9.99 m/s  256 deg   AirPressure : 575.11 hPa    ( Rain:  0.01 )
 Opacity @220 GHz :   0.0145

Time synchronization between 1PPS and SG has no problem

2016-09-10 21:51:43.897	aste-f1c	astref3	WAR	ET=0.000 RT=-0.102765 approach
2016-09-10 21:51:43.997	aste-f1c	astref3	DEB	ET=0.000 RT=-0.002565 (-0.002565) C=1
2016-09-10 21:51:53.997	aste-f1c	astref3	DEB	ET=10.000 RT=9.997770 (-0.002230) C=101
2016-09-10 21:52:03.997	aste-f1c	astref3	DEB	ET=20.000 RT=19.997011 (-0.002989) C=201
2016-09-10 21:52:13.997	aste-f1c	astref3	DEB	ET=30.000 RT=29.997444 (-0.002556) C=301

22:33 UTC - El is automatically set to STBY during the observation
- because El (prog) is above 80 deg??
- -> manually stop the observation and wait until El (real) is below 80 deg (21:30 UTC)

22:32 UTC - FMLO mapping of region 2

aste16/fmlo16/mGCmpx2.start
Az, El = -126, 80 deg

Tsys = 1079 K (A1), 857 K (A2), 1181 K (A3)

 Temp. :   0.70 C   Humid. :  8.06 % (  0.52 hPa )   Solar :  0.00 kW/m2
 Wind  :   8.03 m/s  300 deg   AirPressure : 575.52 hPa    ( Rain:  0.01 )
 Opacity @220 GHz :   0.0274

History of Observing Log/2016-09-10 (No. 5)

CSV2016: Long time integration in DASH345/BAND8 (2016-09-10)†

Tasks†

Preparations†

Information†

Preparations†

Long time integration†

New pointing models†

FMLO Commissioning from SPdA†