History of Observing Log/2016-11-12(No. 4)

History
View the source.
Observing Log/2016-11-12 has been deleted.
- 1 (2016-11-12 (Sat) 12:33:46)
- 2 (2016-11-12 (Sat) 15:45:28)
- 3 (2016-11-12 (Sat) 18:30:41)
- 4 (2016-11-12 (Sat) 20:28:05)
- 5 (2016-11-13 (Sun) 09:58:31)

FFX - ERROR†

observer info†

izumi natsuko
skype: izumi.natsuko

 ASTE Environment Monitor 2016/11/12 03:33:42

===================================ASTE Site===================================
  Temp. :  -5.16 C   Humid. : 57.59 % (  2.40 hPa )   Solar :  0.00 kW/m2
  Wind  :   5.66 m/s  203 deg   AirPressure : 571.66 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0680
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.79 degC   Humid. : 10.78 %
  DBE(MAC):   20.5 degC  27.4 degC  25.4 degC  23.0 degC
  DBE(WHSF):  20.0 degC  20.0 degC  21.0 degC  22.0 degC  21.0 degC  21.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     18.10 C   14.80 C   -4.09 C   16.80 C    4.00 C   17.89 C
  Internal Ret.    19.60 C   15.20 C   14.80 C   -5.70 C   15.20 C   17.39 C
  External        168.60 C   -5.40 C   17.10 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    19.80 degC   18.70 degC   -3.70 degC
  Room Temp.:    16.50 degC

UTC 03:36 Stop COSMOS 3

[asteobs@aste-1c ~] sudo /cosmos3/naoj/sbin/cos3_cntl stop al

UTC 03:48

[asteobs@aste-1c ~]$ ps -ef | grep ffx
root     16899     1  0 Nov11 ?        00:00:00 sh -c /home/asteffx/bin/if_bpf UW > /tmp/.ffx_exe.res
root     16900 16899  0 Nov11 ?        00:00:00 /home/asteffx/bin/if_bpf UW
asteobs  24077 21576  0 03:48 pts/0    00:00:00 grep ffx

UTC0350 Reboot aste-1c

[asteobs@aste-1c ~]$ su
Password: 
[root@aste-1c asteobs]# su halt

***** System shutdown procedure *****

 03:51:42 up 2 days,  1:32,  1 user,  load average: 0.12, 0.04, 0.01
USER     TTY      FROM              LOGIN@   IDLE   JCPU   PCPU WHAT
asteobs  pts/0    aste-mx1         03:36    0.00s  0.00s  0.00s sshd: asteobs [

Shutdown OK ? (y/n/r=reboot): r

System reboot

Broadcast message from asteobs@aste-1c
	(/dev/pts/0) at 3:51 ...

The system is going down for reboot NOW!
[root@aste-1c asteobs]# Connection to aste-1c closed by remote host.
Connection to aste-1c closed.
[asteobs@aste-mx1 Desktop]$

UTC0353 COSMOS3 restart

[asteobs@aste-1c ~]$ sudo /cosmos3/naoj/sbin/cos3_cntl restart all

UTC0359 Check Local controller
```
Maybe recover from FFX error
```

UTC0401 Check Observation

Group/Project/Filename: aste16/linux16/OriK-c2

 ASTE Environment Monitor 2016/11/12 04:07:47

===================================ASTE Site===================================
  Temp. :  -5.29 C   Humid. : 57.74 % (  2.38 hPa )   Solar :  0.00 kW/m2
  Wind  :   6.18 m/s  278 deg   AirPressure : 571.52 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.1179
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.24 degC   Humid. : 10.41 %
  DBE(MAC):   20.4 degC  27.6 degC  25.5 degC  23.2 degC
  DBE(WHSF):  20.0 degC  20.0 degC  21.0 degC  22.0 degC  21.0 degC  21.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.60 C   15.50 C   16.00 C   17.50 C    3.00 C   17.70 C
  Internal Ret.    19.80 C   15.70 C   16.10 C   -5.50 C   16.00 C   17.30 C
  External        168.60 C   -5.40 C   -2.20 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    21.10 degC   20.20 degC   -4.90 degC
  Room Temp.:    18.00 degC

Qlook did not work..

UTC0422 COSMOS3 restart

UTC0430 Check Observation for FWHM

Group/Project/Filename: aste16/linux16/OriK-c2

 ASTE Environment Monitor 2016/11/12 04:30:39

===================================ASTE Site===================================
  Temp. :  -5.45 C   Humid. : 58.87 % (  2.40 hPa )   Solar :  0.00 kW/m2
  Wind  :   5.67 m/s  279 deg   AirPressure : 571.40 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.1329
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.11 degC   Humid. : 10.50 %
  DBE(MAC):   20.0 degC  27.2 degC  25.4 degC  23.0 degC
  DBE(WHSF):  20.0 degC  20.0 degC  21.0 degC  22.0 degC  21.0 degC  21.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.30 C   15.50 C   16.89 C   17.20 C   13.80 C   17.70 C
  Internal Ret.    19.60 C   15.60 C   16.10 C   -1.80 C   16.00 C   17.20 C
  External        168.60 C   -5.80 C    5.80 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    21.30 degC   19.50 degC   -5.80 degC
  Room Temp.:    14.80 degC

Cannot detect signal at X1 and X3 => Another Error ??

[asteobs@aste-1c ~]$ 2016/11/12 04:32:53 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 04:32:53 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 04:32:53 ERROR   shm_pressure : Failed to read data
2016/11/12 04:32:53 WARNING  shm_pressure : pressure read retry

UTC0517 retry tuning

Problem at S1USB and S1LSB ?

	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	-1.51	-0.89	59.00	58.40	-1.74	-1.81	91.17	84.46	[mV]
	***Set ATT***
	S1USB:ATT_old = 32.75 [dB]
	S1USB:ATT overrange: ATT=32.75
	S1USB:ATT_new = 32.75 [dB]
	S1LSB:ATT_old = 32.75 [dB]
	S1LSB:ATT overrange: ATT=32.75
	S1LSB:ATT_new = 32.75 [dB]
	S2USB:ATT_old = 14.50 [dB]
	S2USB:ATT_new = 14.50 [dB]
	S2LSB:ATT_old = 17.00 [dB]
	S2LSB:ATT_new = 17.00 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	-1.45	-0.81	59.24	58.64	-1.90	-1.85	91.40	84.79	[mV]

	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	-1.42	-0.79	60.13	59.24	-1.84	-1.85	93.15	91.93	[mV]
	***Set ATT***
	S1IFA:ATT_old = 23.75 [dB]
	S1IFA:ATT overrange: ATT=23.75
	S1IFA:ATT_new = 23.75 [dB]
	S1IFB:ATT_old = 23.75 [dB]
	S1IFB:ATT overrange: ATT=23.75
	S1IFB:ATT_new = 23.75 [dB]
	S2IFA:ATT_old = 5.75 [dB]
	S2IFA:ATT_new = 5.75 [dB]
	S2IFB:ATT_old = 6.50 [dB]
	S2IFB:ATT_new = 6.50 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	-1.57	-0.83	58.93	58.42	-1.81	-1.80	90.71	92.51	[mV]

	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	-2.5	-1.7	32.8	29.1	-2.0	-1.8	50.0	47.3	[mV]

	Result: R-SKY
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	0.000	0.000	2.507	3.047	0.000	0.000	2.615	2.869	[dB]

	Result: Tsys[Tamb=293K]
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	0.0	0.0	375.0	288.1	0.0	0.0	354.8	313.1	[K]

Retry observation..
- Detect strange signal at X1 and X3 => Start tuning twice => Not fixed...

[asteobs@aste-1c ~]$ 2016/11/12 05:51:04 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 05:51:04 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 05:51:04 ERROR   shm_pressure : Failed to read data
2016/11/12 05:51:04 WARNING  shm_pressure : pressure read retry
2016/11/12 05:54:37 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 05:54:37 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 05:54:37 ERROR   shm_pressure : Failed to read data
2016/11/12 05:54:37 WARNING  shm_pressure : pressure read retry

UTC0616 Check Observation for MAC
- Group/Project/Filename: aste16/linux16/OriK-cw

ASTE Environment Monitor 2016/11/12 06:17:24

===================================ASTE Site===================================
  Temp. :  -5.82 C   Humid. : 56.46 % (  2.24 hPa )   Solar :  0.00 kW/m2
  Wind  :   3.19 m/s  266 deg   AirPressure : 570.80 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0707
================================ Receiver Cabin ===============================
  Main Cabin:  17.9 C  Upper Cabin:   8.7 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.12 degC   Humid. : 10.16 %
  DBE(MAC):   20.2 degC  27.5 degC  25.3 degC  23.2 degC
  DBE(WHSF):  20.0 degC  20.0 degC  21.0 degC  22.0 degC  21.0 degC  20.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.10 C   16.20 C   17.20 C   18.39 C   -6.40 C   17.80 C
  Internal Ret.    19.60 C   16.00 C   17.10 C   16.89 C   16.20 C   17.30 C
  External        168.60 C   -7.50 C   -3.10 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.20 degC   19.10 degC   -6.60 degC
  Room Temp.:    17.30 degC

UTC0622 ANTENNA_G trouble => COSMOS3 restart
We can detect signals

↑

A16016†

↑

observer info†

izumi natsuko
skype: izumi.natsuko

 ASTE Environment Monitor 2016/11/12 07:58:45

===================================ASTE Site===================================
  Temp. :  -6.92 C   Humid. : 49.79 % (  1.81 hPa )   Solar :  0.00 kW/m2
  Wind  :   2.78 m/s  244 deg   AirPressure : 570.11 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0688
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.62 degC   Humid. :  9.87 %
  DBE(MAC):   19.6 degC  27.1 degC  25.0 degC  22.7 degC
  DBE(WHSF):  19.0 degC  19.0 degC  20.0 degC  21.0 degC  21.0 degC  20.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     16.60 C   15.20 C   17.00 C   17.00 C   10.19 C   17.10 C
  Internal Ret.    19.10 C   15.20 C   15.30 C   -5.80 C   15.50 C   16.30 C
  External        168.60 C   -9.90 C    1.00 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    21.20 degC   20.10 degC   -9.30 degC
  Room Temp.:    18.10 degC

UTC0800 Pointing DASH345
- Filename: L2P-5p1
  - Baseline in p0 is not good..

[asteobs@aste-1c ~]$ 2016/11/12 08:07:57 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 08:07:57 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 08:07:57 ERROR shm_pressure : Failed to read data 2016/11/12 08:07:57 WARNING shm_pressure : pressure read retry 2016/11/12 08:16:05 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 08:16:05 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 08:16:05 ERROR shm_pressure : Failed to read data 2016/11/12 08:16:05 WARNING shm_pressure : pressure read retry

Filename: L2P-5p4
- Baseline in p0 is also not good..

Fileneme: L2P-5p3
- ddA z= 1.0, ddEl = 5.0

UTC0859 Calibration

 ASTE Environment Monitor 2016/11/12 08:59:26

===================================ASTE Site===================================
  Temp. :  -8.33 C   Humid. : 54.12 % (  1.77 hPa )   Solar :  0.00 kW/m2
  Wind  :   0.58 m/s  247 deg   AirPressure : 569.97 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0610
================================ Receiver Cabin ===============================
  Main Cabin:  17.5 C  Upper Cabin:   8.2 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.91 degC   Humid. :  9.16 %
  DBE(MAC):   17.4 degC  20.5 degC  22.1 degC  21.6 degC
  DBE(WHSF):  18.0 degC  18.0 degC  19.0 degC  20.0 degC  20.0 degC  19.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     15.50 C   14.80 C   16.89 C   15.90 C   14.70 C   16.20 C
  Internal Ret.    17.80 C   14.80 C   15.20 C   -6.50 C   15.30 C   15.90 C
  External        168.60 C  -12.00 C   -3.30 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    19.60 degC   18.70 degC  -10.50 degC
  Room Temp.:    16.50 degC

[asteobs@aste-1c ~]$ 2016/11/12 08:42:51 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 08:42:51 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 08:42:51 ERROR   shm_pressure : Failed to read data
2016/11/12 08:42:51 WARNING  shm_pressure : pressure read retry
2016/11/12 08:49:34 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 08:49:34 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 08:49:34 ERROR   shm_pressure : Failed to read data
2016/11/12 08:49:34 WARNING  shm_pressure : pressure read retry
2016/11/12 08:57:43 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 08:57:43 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 08:57:43 ERROR   shm_pressure : Failed to read data
2016/11/12 08:57:43 WARNING  shm_pressure : pressure read retry
2016/11/12 09:07:30 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 09:07:30 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 09:07:30 ERROR   shm_pressure : Failed to read data
2016/11/12 09:07:30 WARNING  shm_pressure : pressure read retry

UTC0910 OTF mapping

 ASTE Environment Monitor 2016/11/12 09:30:27

===================================ASTE Site===================================
  Temp. : -10.00 C   Humid. : 60.86 % (  1.74 hPa )   Solar :  0.00 kW/m2
  Wind  :   0.42 m/s   64 deg   AirPressure : 569.99 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0773
================================ Receiver Cabin ===============================
  Main Cabin:  17.1 C  Upper Cabin:   7.8 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.12 degC   Humid. :  8.82 %
  DBE(MAC):   19.0 degC  24.9 degC  23.9 degC  22.4 degC
  DBE(WHSF):  19.0 degC  19.0 degC  19.0 degC  21.0 degC  21.0 degC  19.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     15.80 C   15.40 C   15.90 C   16.80 C   -9.30 C   16.30 C
  Internal Ret.    18.39 C   15.40 C   16.00 C   -3.50 C   15.80 C   15.80 C
  External        168.60 C  -12.00 C   -5.00 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.10 degC   19.00 degC  -10.40 degC
  Room Temp.:    16.89 degC

2016/11/12 09:37:20 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 09:37:20 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 09:37:20 ERROR shm_pressure : Failed to read data 2016/11/12 09:37:20 WARNING shm_pressure : pressure read retry 2016/11/12 09:39:07 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 09:39:07 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 09:39:07 ERROR shm_pressure : Failed to read data 2016/11/12 09:39:07 WARNING shm_pressure : pressure read retry 2016/11/12 09:40:35 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 09:40:35 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 09:40:35 ERROR shm_pressure : Failed to read data 2016/11/12 09:40:35 WARNING shm_pressure : pressure read retry

UTC1000 OTF mapping

 ASTE Environment Monitor 2016/11/12 10:15:42

===================================ASTE Site===================================
  Temp. :  -7.36 C   Humid. : 54.90 % (  1.93 hPa )   Solar :  0.12 kW/m2
  Wind  :   0.55 m/s  355 deg   AirPressure : 570.11 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0353
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.63 degC   Humid. :  9.13 %
  DBE(MAC):   17.2 degC  20.3 degC  22.0 degC  21.5 degC
  DBE(WHSF):  18.0 degC  18.0 degC  19.0 degC  20.0 degC  20.0 degC  19.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     15.60 C   14.20 C    0.50 C   16.20 C   12.60 C   15.90 C
  Internal Ret.    17.60 C   14.40 C   14.80 C   11.70 C   15.00 C   15.40 C
  External        168.60 C   -7.20 C   -1.50 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.10 degC   19.10 degC   -8.50 degC
  Room Temp.:    16.89 degC

2016/11/12 09:58:35 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 09:58:35 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 09:58:35 ERROR shm_pressure : Failed to read data 2016/11/12 09:58:35 WARNING shm_pressure : pressure read retry 2016/11/12 10:00:03 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 10:00:03 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 10:00:03 ERROR shm_pressure : Failed to read data 2016/11/12 10:00:03 WARNING shm_pressure : pressure read retry 2016/11/12 10:23:06 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 10:23:06 ERROR shm_pressure : Failed to read data 2016/11/12 10:23:06 WARNING shm_pressure : pressure read retry Segmentation Fault

UTC1052 Calibration

 ASTE Environment Monitor 2016/11/12 10:52:51

===================================ASTE Site===================================
  Temp. :  -6.28 C   Humid. : 52.92 % (  2.02 hPa )   Solar :  0.27 kW/m2
  Wind  :   2.42 m/s  222 deg   AirPressure : 570.32 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0551
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.77 degC   Humid. :  9.53 %
  DBE(MAC):   17.6 degC  20.5 degC  22.0 degC  21.5 degC
  DBE(WHSF):  19.0 degC  19.0 degC  19.0 degC  20.0 degC  20.0 degC  19.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     16.60 C   14.50 C    1.20 C   15.70 C   -1.70 C   16.60 C
  Internal Ret.    17.80 C   14.90 C   14.70 C   -5.70 C   15.10 C   15.80 C
  External        168.60 C   -2.20 C    4.40 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    26.00 degC   28.20 degC   -1.30 degC
  Room Temp.:    21.50 degC

[asteobs@aste-1c ~]$ asterx_set DASH345

### Query of LO Freq ### LO Freq = 351.581002080

### Set CLNA ### /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.581002080 vd0=1.200000, id0=10.000000 vd1=0.000000, id1=0.000000 vd2=0.000000, id2=0.000000 ASTE FEMC:OPEN FEMC_TCP 7

Ver 0.91

Program running. Do not turn off power to CAN nodes.

AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0

SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 OK

GET_CLNA 0 1 1.205048,10.040436,-0.280151,0.003326,0.012817,4.910614,0.003616,0.023041,4.910538,1

GET_CLNA 0 2 1.204834,10.053711,-0.383072,0.003235,0.022888,-4.848618,0.004105,0.022430,4.910583,1

GET_CLNA 1 1 1.206009,10.049133,-0.797150,0.003159,0.022278,-4.882141,0.003265,0.024261,-4.882187,1

GET_CLNA 1 2 1.206665,10.090942,-0.302902,0.003738,0.019531,-4.882065,0.003571,0.013733,4.931671,1

CAN_CLOSE CAN closed ASTE FEMC:CLOSE

### Set SIS bias ### /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.581002080 351.581002 2.100000 1.900000 1.900000 1.900000 ASTE FEMC:OPEN FEMC_TCP 7

Ver 0.91

Program running. Do not turn off power to CAN nodes.

AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0

SET_SIS_MODE 0 SET SIS MODE:CLOSE LOOP

SET_SIS_V 0 1 2.100 OK

SET_SIS_V 0 2 1.900 OK

SET_SIS_V 1 1 1.900 OK

SET_SIS_V 1 2 1.900 OK

GET_SIS_VC 0 1 1.981735,47.296143

GET_SIS_VC 0 2 1.782150,30.572510

GET_SIS_VC 1 1 1.807938,54.809570

GET_SIS_VC 1 2 1.814346,37.252808

CAN_CLOSE CAN closed ASTE FEMC:CLOSE

### Set LO Power ### /cosmos3/naoj/bin/loatt_dash345_tune 351.581002080 /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.581002080 /cosmos3/naoj/bin/loatt_dash345 292 286 Set ATT : Pol0=292, Pol1=286
Pol0 =      292   , Pol1 =      286
Pol0 = 0.007127[A], Pol1 = 0.006981[A]
Pol0 = 0.670200[V], Pol1 = 0.770417[V]
[asteobs@aste-1c ~]$ mmc1_rstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe r Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] 20161112t063804z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161112t063804z open_mmc('mmc1:8501'): socket '4' connect success. 20161112t063804z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161112t063804z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. seq_r start. cmd_reset_all() 20161112t063804z mmc1 r reset_all. mmc is active 20161112t063804z mmc1 is active. mode=0000 0 mode=1000 4096 mode=0000 0 position 'R' verify ok. seq_r end. 20161112t063806z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161112t063806z close_mmc(): socket '4' closed. 20161112t063806z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. [asteobs@aste-1c ~]$ ifeo_tune 1 0.030 volt=0.030000
   E/O att. = 14 dB      E/O att. = 14 dB    IF level=0.038681
new E/O att. = 14 dB IF level=0.038875 new E/O att. = 16 dB IF level=0.023088 new E/O att. = 14 dB IF level=0.041523 new E/O att. = 16 dB IF level=0.023265 16 dB 0.023265 V [asteobs@aste-1c ~]$ ifeo_tune 2 0.050 volt=0.050000
   E/O att. = 15 dB    IF level=0.047739
new E/O att. = 15 dB IF level=0.046533 new E/O att. = 14 dB IF level=0.062770 new E/O att. = 15 dB IF level=0.044575 15 dB 0.044575 V [asteobs@aste-1c ~]$ mmc1_sstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe sky Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] 20161112t063842z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161112t063842z open_mmc('mmc1:8501'): socket '4' connect success. 20161112t063842z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161112t063842z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. seq_sky start. cmd_reset_all() 20161112t063842z mmc1 sky reset_all. mmc is active 20161112t063842z mmc1 is active. mode=0000 0 mode=2000 8192 mode=0000 0 position 'SKY' verify ok. seq_sky end. 20161112t063845z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161112t063845z close_mmc(): socket '4' closed. 20161112t063845z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. [asteobs@aste-1c ~]$ 2016/11/12 07:26:19 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 07:26:19 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 07:26:19 ERROR shm_pressure : Failed to read data 2016/11/12 07:26:19 WARNING shm_pressure : pressure read retry 2016/11/12 07:32:56 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 07:32:56 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 07:32:56 ERROR shm_pressure : Failed to read data 2016/11/12 07:32:56 WARNING shm_pressure : pressure read retry 2016/11/12 07:39:39 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 07:39:39 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 07:39:39 ERROR shm_pressure : Failed to read data 2016/11/12 07:39:39 WARNING shm_pressure : pressure read retry

[asteobs@aste-1c ~]$ [asteobs@aste-1c ~]$ asterx_set DASH345

### Query of LO Freq ### LO Freq = 351.549774552

### Set CLNA ### /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.549774552 vd0=1.200000, id0=10.000000 vd1=0.000000, id1=0.000000 vd2=0.000000, id2=0.000000 ASTE FEMC:OPEN FEMC_TCP 7

Ver 0.91

Program running. Do not turn off power to CAN nodes.

AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0

SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 OK

GET_CLNA 0 1 1.205002,10.066986,-0.280396,0.003281,0.013123,4.910599,0.003693,0.022888,4.910690,1

GET_CLNA 0 2 1.204941,10.052643,-0.383438,0.003220,0.023499,-4.848679,0.004150,0.021515,4.910583,1

GET_CLNA 1 1 1.205856,10.053101,-0.797165,0.003098,0.022125,-4.882080,0.003357,0.025024,-4.882065,1

GET_CLNA 1 2 1.206726,10.098724,-0.302856,0.003723,0.019226,-4.882095,0.003494,0.014343,4.931717,1

CAN_CLOSE CAN closed ASTE FEMC:CLOSE

### Set SIS bias ### /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.549774552 351.549775 2.100000 1.900000 1.900000 1.900000 ASTE FEMC:OPEN FEMC_TCP 7

Ver 0.91

Program running. Do not turn off power to CAN nodes.

AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0

SET_SIS_MODE 0 SET SIS MODE:CLOSE LOOP

SET_SIS_V 0 1 2.100 OK

SET_SIS_V 0 2 1.900 OK

SET_SIS_V 1 1 1.900 OK

SET_SIS_V 1 2 1.900 OK

GET_SIS_VC 0 1 1.981659,67.138672

GET_SIS_VC 0 2 1.782303,44.586182

GET_SIS_VC 1 1 1.808853,59.106445

GET_SIS_VC 1 2 1.814423,41.558838

CAN_CLOSE CAN closed ASTE FEMC:CLOSE

### Set LO Power ### /cosmos3/naoj/bin/loatt_dash345_tune 351.549774552 /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.549774552 /cosmos3/naoj/bin/loatt_dash345 293 286 Set ATT : Pol0=293, Pol1=286
Pol0 =      293   , Pol1 =      286
Pol0 = 0.007152[A], Pol1 = 0.006981[A]
Pol0 = 0.670722[V], Pol1 = 0.770742[V]
[asteobs@aste-1c ~]$ mmc1_rstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe r Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] 20161112t080059z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161112t080059z open_mmc('mmc1:8501'): socket '4' connect success. 20161112t080059z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161112t080059z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. seq_r start. cmd_reset_all() 20161112t080059z mmc1 r reset_all. mmc is active 20161112t080100z mmc1 is active. mode=0000 0 mode=1000 4096 mode=0000 0 position 'R' verify ok. seq_r end. 20161112t080102z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161112t080102z close_mmc(): socket '4' closed. 20161112t080102z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. [asteobs@aste-1c ~]$ ifeo_tune 1 0.030 volt=0.030000
   E/O att. = 16 dB      E/O att. = 16 dB    IF level=0.025643
new E/O att. = 16 dB IF level=0.025535 new E/O att. = 14 dB IF level=0.041480 new E/O att. = 16 dB IF level=0.023057 16 dB 0.023057 V [asteobs@aste-1c ~]$ ifeo_tune 2 0.050 volt=0.050000
   E/O att. = 15 dB    IF level=0.046724
new E/O att. = 15 dB IF level=0.045858 new E/O att. = 14 dB IF level=0.061663 new E/O att. = 15 dB IF level=0.043874 15 dB 0.043874 V [asteobs@aste-1c ~]$ mmc1_sstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe sky Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] 20161112t080140z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161112t080140z open_mmc('mmc1:8501'): socket '4' connect success. 20161112t080140z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161112t080140z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. seq_sky start. cmd_reset_all() 20161112t080140z mmc1 sky reset_all. mmc is active 20161112t080140z mmc1 is active. mode=0000 0 mode=2000 8192 mode=0000 0 position 'SKY' verify ok. seq_sky end. 20161112t080142z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161112t080142z close_mmc(): socket '4' closed. 20161112t080142z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. [asteobs@aste-1c ~]$ yfactor 1 Execute /cosmos3/naoj/bin/mmc1_rstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe r Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] seq_r start. seq_r end. 20161112t080152z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161112t080152z open_mmc('mmc1:8501'): socket '8' connect success. 20161112t080152z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161112t080152z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. cmd_reset_all() 20161112t080152z mmc1 r reset_all. mmc is active 20161112t080152z mmc1 is active. mode=0000 0 mode=1000 4096 mode=0000 0 position 'R' verify ok. 20161112t080154z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161112t080154z close_mmc(): socket '8' closed. 20161112t080154z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. Execute /cosmos3/naoj/bin/ifeo 1
   E/O att. = 16 dB
E/O IF level = 0.025707 V
Execute /cosmos3/naoj/bin/mmc1_sstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe sky Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] seq_sky start. seq_sky end. 20161112t080158z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161112t080158z open_mmc('mmc1:8501'): socket '8' connect success. 20161112t080158z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161112t080158z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. cmd_reset_all() 20161112t080158z mmc1 sky reset_all. mmc is active 20161112t080158z mmc1 is active. mode=0000 0 mode=2000 8192 mode=0000 0 position 'SKY' verify ok. 20161112t080200z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161112t080200z close_mmc(): socket '8' closed. 20161112t080200z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. Execute /cosmos3/naoj/bin/ifeo 1
   E/O att. = 16 dB
E/O IF level = 0.012602 V
R=0.025707 V, Sky=0.012602 V, Y=3.096119 dB 3.096119 [asteobs@aste-1c ~]$ yfactor 2 Execute /cosmos3/naoj/bin/mmc1_rstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe r Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] seq_r start. seq_r end. 20161112t080219z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161112t080219z open_mmc('mmc1:8501'): socket '8' connect success. 20161112t080219z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161112t080219z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. cmd_reset_all() 20161112t080219z mmc1 r reset_all. mmc is active 20161112t080219z mmc1 is active. mode=0000 0 mode=1000 4096 mode=0000 0 position 'R' verify ok. 20161112t080221z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161112t080221z close_mmc(): socket '8' closed. 20161112t080221z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. Execute /cosmos3/naoj/bin/ifeo 2
   E/O att. = 15 dB
E/O IF level = 0.045937 V
Execute /cosmos3/naoj/bin/mmc1_sstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe sky Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] seq_sky start. seq_sky end. 20161112t080225z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161112t080225z open_mmc('mmc1:8501'): socket '8' connect success. 20161112t080225z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161112t080225z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. cmd_reset_all() 20161112t080225z mmc1 sky reset_all. mmc is active 20161112t080225z mmc1 is active. mode=0000 0 mode=2000 8192 mode=0000 0 position 'SKY' verify ok. 20161112t080227z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161112t080227z close_mmc(): socket '8' closed. 20161112t080227z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. Execute /cosmos3/naoj/bin/ifeo 2
   E/O att. = 15 dB
E/O IF level = 0.032286 V
R=0.045937 V, Sky=0.032286 V, Y=1.531484 dB 1.531484 [asteobs@aste-1c ~]$ 2016/11/12 08:07:57 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 08:07:57 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 08:07:57 ERROR shm_pressure : Failed to read data 2016/11/12 08:07:57 WARNING shm_pressure : pressure read retry 2016/11/12 08:16:05 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 08:16:05 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 08:16:05 ERROR shm_pressure : Failed to read data 2016/11/12 08:16:05 WARNING shm_pressure : pressure read retry

[asteobs@aste-1c ~]$ [asteobs@aste-1c ~]$ asterx_set DASH345

### Query of LO Freq ### LO Freq = 339.949745136

### Set CLNA ### /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 339.949745136 vd0=1.200000, id0=10.000000 vd1=0.000000, id1=0.000000 vd2=0.000000, id2=0.000000 ASTE FEMC:OPEN FEMC_TCP 7

Ver 0.91

Program running. Do not turn off power to CAN nodes.

AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0

SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 OK

GET_CLNA 0 1 1.205109,10.069885,-0.280029,0.003342,0.014191,4.910599,0.003571,0.023041,4.910660,1

GET_CLNA 0 2 1.204926,10.053253,-0.383087,0.003174,0.023041,-4.848602,0.004181,0.021820,4.910629,1

GET_CLNA 1 1 1.206039,10.052338,-0.797623,0.003189,0.021973,-4.882111,0.003281,0.024567,-4.882095,1

GET_CLNA 1 2 1.206711,10.093231,-0.303040,0.003708,0.019684,-4.882050,0.003448,0.012817,4.931656,1

CAN_CLOSE CAN closed ASTE FEMC:CLOSE

### Set SIS bias ### /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 339.949745136 339.949745 1.900000 1.900000 1.900000 1.900000 ASTE FEMC:OPEN FEMC_TCP 7

Ver 0.91

Program running. Do not turn off power to CAN nodes.

AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0

SET_SIS_MODE 0 SET SIS MODE:CLOSE LOOP

SET_SIS_V 0 1 1.900 OK

SET_SIS_V 0 2 1.900 OK

SET_SIS_V 1 1 1.900 OK

SET_SIS_V 1 2 1.900 OK

GET_SIS_VC 0 1 1.778336,14.343262

GET_SIS_VC 0 2 1.782837,10.562134

GET_SIS_VC 1 1 1.806641,18.896484

GET_SIS_VC 1 2 1.817474,17.568970

CAN_CLOSE CAN closed ASTE FEMC:CLOSE

### Set LO Power ### /cosmos3/naoj/bin/loatt_dash345_tune 339.949745136 /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 339.949745136 /cosmos3/naoj/bin/loatt_dash345 287 285 Set ATT : Pol0=287, Pol1=285
Pol0 =      287   , Pol1 =      285
Pol0 = 0.007006[A], Pol1 = 0.006957[A]
Pol0 = 0.670515[V], Pol1 = 0.771313[V]
[asteobs@aste-1c ~]$ mmc1_rstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe r Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] 20161112t082252z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161112t082252z open_mmc('mmc1:8501'): socket '4' connect success. 20161112t082252z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161112t082252z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. seq_r start. cmd_reset_all() 20161112t082252z mmc1 r reset_all. mmc is active 20161112t082252z mmc1 is active. mode=0000 0 mode=1000 4096 mode=0000 0 position 'R' verify ok. seq_r end. 20161112t082255z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161112t082255z close_mmc(): socket '4' closed. 20161112t082255z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. [asteobs@aste-1c ~]$ ifeo_tune 1 0.030 volt=0.030000
   E/O att. = 16 dB      E/O att. = 16 dB    IF level=0.013659
new E/O att. = 16 dB IF level=0.013663 new E/O att. = 14 dB IF level=0.021272 new E/O att. = 12 dB IF level=0.032313 new E/O att. = 14 dB IF level=0.018177 new E/O att. = 12 dB IF level=0.032211 12 dB 0.032211 V [asteobs@aste-1c ~]$ ifeo_tune 2 0.050 volt=0.050000
   E/O att. = 15 dB    IF level=0.035906
new E/O att. = 15 dB IF level=0.035809 new E/O att. = 14 dB IF level=0.047579 new E/O att. = 13 dB IF level=0.059884 new E/O att. = 14 dB IF level=0.042426 14 dB 0.042426 V [asteobs@aste-1c ~]$ mmc1_sstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe sky Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] 20161112t082338z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161112t082338z open_mmc('mmc1:8501'): socket '4' connect success. 20161112t082338z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161112t082338z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. seq_sky start. cmd_reset_all() 20161112t082338z mmc1 sky reset_all. mmc is active 20161112t082338z mmc1 is active. mode=0000 0 mode=2000 8192 mode=0000 0 position 'SKY' verify ok. seq_sky end. 20161112t082340z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161112t082340z close_mmc(): socket '4' closed. 20161112t082340z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. [asteobs@aste-1c ~]$ asterx_set DASH345

### Query of LO Freq ### LO Freq = 351.549717840

### Set CLNA ### /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.549717840 vd0=1.200000, id0=10.000000 vd1=0.000000, id1=0.000000 vd2=0.000000, id2=0.000000 ASTE FEMC:OPEN FEMC_TCP 7

Ver 0.91

Program running. Do not turn off power to CAN nodes.

AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0

SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 OK

GET_CLNA 0 1 1.204910,10.064697,-0.279892,0.003326,0.013885,4.910645,0.003647,0.022125,4.910660,1

GET_CLNA 0 2 1.205017,10.053711,-0.383331,0.003281,0.022278,-4.848633,0.004105,0.021667,4.910583,1

GET_CLNA 1 1 1.205994,10.049133,-0.798248,0.003189,0.021820,-4.882050,0.003281,0.025635,-4.882141,1

GET_CLNA 1 2 1.206650,10.093994,-0.302811,0.003815,0.018768,-4.882080,0.003510,0.013123,4.931564,1

CAN_CLOSE CAN closed ASTE FEMC:CLOSE

### Set SIS bias ### /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.549717840 351.549718 2.100000 1.900000 1.900000 1.900000 ASTE FEMC:OPEN FEMC_TCP 7

Ver 0.91

Program running. Do not turn off power to CAN nodes.

AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0

SET_SIS_MODE 0 SET SIS MODE:CLOSE LOOP

SET_SIS_V 0 1 2.100 OK

SET_SIS_V 0 2 1.900 OK

SET_SIS_V 1 1 1.900 OK

SET_SIS_V 1 2 1.900 OK

GET_SIS_VC 0 1 1.980286,73.010254

GET_SIS_VC 0 2 1.779785,48.214722

GET_SIS_VC 1 1 1.808853,59.603882

GET_SIS_VC 1 2 1.816101,41.921997

CAN_CLOSE CAN closed ASTE FEMC:CLOSE

### Set LO Power ### /cosmos3/naoj/bin/loatt_dash345_tune 351.549717840 /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.549717840 /cosmos3/naoj/bin/loatt_dash345 293 286 Set ATT : Pol0=293, Pol1=286
Pol0 =      293   , Pol1 =      286
Pol0 = 0.007151[A], Pol1 = 0.006981[A]
Pol0 = 0.671561[V], Pol1 = 0.771397[V]
[asteobs@aste-1c ~]$ mmc1_rstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe r Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] 20161112t083537z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161112t083537z open_mmc('mmc1:8501'): socket '4' connect success. 20161112t083537z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161112t083537z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. seq_r start. cmd_reset_all() 20161112t083537z mmc1 r reset_all. mmc is active 20161112t083537z mmc1 is active. mode=0000 0 mode=1000 4096 mode=0000 0 position 'R' verify ok. seq_r end. 20161112t083539z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161112t083539z close_mmc(): socket '4' closed. 20161112t083539z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. [asteobs@aste-1c ~]$ ifeo_tune 1 0.030 volt=0.030000
   E/O att. = 12 dB      E/O att. = 12 dB    IF level=0.059671
new E/O att. = 12 dB IF level=0.059757 new E/O att. = 14 dB IF level=0.035214 new E/O att. = 16 dB IF level=0.023309 new E/O att. = 14 dB IF level=0.041928 14 dB 0.041928 V [asteobs@aste-1c ~]$ ifeo_tune 2 0.050 volt=0.050000
   E/O att. = 14 dB    IF level=0.062373
new E/O att. = 14 dB IF level=0.062508 new E/O att. = 15 dB IF level=0.046638 new E/O att. = 14 dB IF level=0.065741 new E/O att. = 15 dB IF level=0.046639 15 dB 0.046639 V [asteobs@aste-1c ~]$ mmc1_sstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe sky Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] 20161112t083628z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161112t083628z open_mmc('mmc1:8501'): socket '4' connect success. 20161112t083628z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161112t083628z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. seq_sky start. cmd_reset_all() 20161112t083628z mmc1 sky reset_all. mmc is active 20161112t083628z mmc1 is active. mode=0000 0 mode=2000 8192 mode=0000 0 position 'SKY' verify ok. seq_sky end. 20161112t083631z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161112t083631z close_mmc(): socket '4' closed. 20161112t083631z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. [asteobs@aste-1c ~]$ 2016/11/12 08:42:51 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 08:42:51 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 08:42:51 ERROR shm_pressure : Failed to read data 2016/11/12 08:42:51 WARNING shm_pressure : pressure read retry 2016/11/12 08:49:34 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 08:49:34 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 08:49:34 ERROR shm_pressure : Failed to read data 2016/11/12 08:49:34 WARNING shm_pressure : pressure read retry 2016/11/12 08:57:43 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 08:57:43 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 08:57:43 ERROR shm_pressure : Failed to read data 2016/11/12 08:57:43 WARNING shm_pressure : pressure read retry 2016/11/12 09:07:30 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 09:07:30 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 09:07:30 ERROR shm_pressure : Failed to read data 2016/11/12 09:07:30 WARNING shm_pressure : pressure read retry 2016/11/12 09:37:20 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 09:37:20 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 09:37:20 ERROR shm_pressure : Failed to read data 2016/11/12 09:37:20 WARNING shm_pressure : pressure read retry 2016/11/12 09:39:07 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 09:39:07 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 09:39:07 ERROR shm_pressure : Failed to read data 2016/11/12 09:39:07 WARNING shm_pressure : pressure read retry 2016/11/12 09:40:35 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 09:40:35 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 09:40:35 ERROR shm_pressure : Failed to read data 2016/11/12 09:40:35 WARNING shm_pressure : pressure read retry 2016/11/12 09:58:35 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 09:58:35 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 09:58:35 ERROR shm_pressure : Failed to read data 2016/11/12 09:58:35 WARNING shm_pressure : pressure read retry 2016/11/12 10:00:03 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 10:00:03 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 10:00:03 ERROR shm_pressure : Failed to read data 2016/11/12 10:00:03 WARNING shm_pressure : pressure read retry [asteobs@aste-1c ~]$ 2016/11/12 10:23:06 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/12 10:23:06 ERROR shm_pressure : Read error (serial_read2) 2016/11/12 10:23:06 ERROR shm_pressure : Failed to read data 2016/11/12 10:23:06 WARNING shm_pressure : pressure read retry Segmentation Fault

[asteobs@aste-1c ~]$ Segmentation Fault

History of Observing Log/2016-11-12 (No. 4)

FFX - ERROR†

observer info†

A16016†

observer info†