History of Observing Log/2016-09-16 (No. 4)

• History
• View the source.
• Observing Log/2016-09-16 has been deleted.
  • 1 (2016-09-15 (Thu) 23:23:21)
  • 2 (2016-09-16 (Fri) 11:22:33)
  • 3 (2016-09-16 (Fri) 13:03:43)
  • 4 (2016-09-16 (Fri) 17:06:11)

---

Observing Log

---

---

CSV2016: Radio pointing offsets of DASH345/BAND8 (2016-09-16)†

Tasks†

• Radio pointing offsets in DASH345

Preparations†

1. Basic checks
   • Record which kisa files are used for DASH345 and BAND8

   aste16@aste-ms1: ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
   lrwxrwxrwx 1 astecntl astctl 12 Sep 15 05:04 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.160913
   lrwxrwxrwx 1 astecntl astctl 12 Sep 15 05:04 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.160913

   • Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
   • Check Aspirin is working in the "WIND" mode
2. Tuning at EL=60.0 deg
   • Tuning of DASH345/BAND8 for continuum observations
   • Don't forget to record weather conditions

Radio pointing offsets of DASH345/BAND8†

• Its instruction is HERE

1. Repeat cross scans toward Saturn and shots of a star one after the other
2. Data reduction
   • Still under preparation

---

Information†

• Observers: Tanaka, Ashitagawa
• Site: Mitaka
• Weather conditions (2016-09-16UT23:21)

  Temperature: -0.75 C
  Humidity: 573.22 hPa
  Wind: 7.70 m/s (255 deg)
  220GHz opacity: 0.0722

1. Basic checks
   • Kisa

     [aste16@aste-ms1 ~]$ ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
     lrwxrwxrwx 1 astecntl astctl 12 Sep 15 05:04 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.160913
     lrwxrwxrwx 1 astecntl astctl 12 Sep 15 05:04 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.160913

   • Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero --> OK
   • Check Aspirin is working in the "WIND" mode --> OK
2. Tuning at EL=60.0 deg

   [asteobs@aste-1c ~]$ swbox_ctl_be CONT                 
   [asteobs@aste-1c ~]$ swbox_ctl_be     
   status: swbox_ctl_be CONT
   [asteobs@aste-1c ~]$ asterx_sw DASH345
   ### SYNTHE RF-OFF ###
   /cosmos3/naoj/bin/synthe_ctl B RF OFF
   FREQ = 12.966151717 [GHz]
   AMPL = 13.00 [dBm]
   RF   = ON
   ### After setting synthe ###
   FREQ = 12.966151717 [GHz]
   AMPL = 13.00 [dBm]
   RF   = OFF
   ### SWBOX changed ###
   /cosmos3/naoj/bin/swbox_ctl_rx 0
   ### SYNTHE set ###
   /cosmos3/naoj/bin/synthe_ctl B AMPL +20dBm
   FREQ = 12.966151717 [GHz]
   AMPL = 13.00 [dBm]
   RF   = OFF
   ### After setting synthe ###
   FREQ = 12.966151717 [GHz]
   AMPL = 20.00 [dBm]
   RF   = OFF
   /cosmos3/naoj/bin/synthe_ctl B RF ON
   FREQ = 12.966151717 [GHz]
   AMPL = 20.00 [dBm]
   RF   = OFF
   ### After setting synthe ###
   FREQ = 12.966151717 [GHz]
   AMPL = 20.00 [dBm]
   RF   = ON
   [asteobs@aste-1c ~]$ 
   [asteobs@aste-1c ~]$ 
   [asteobs@aste-1c ~]$ 
   [asteobs@aste-1c ~]$ synthe_ctl B FREQ 14.375
   FREQ = 12.966151717 [GHz]
   AMPL = 20.00 [dBm]
   RF   = ON
   ### After setting synthe ###
   FREQ = 14.375000000 [GHz]
   AMPL = 20.00 [dBm]
   RF   = ON
   [asteobs@aste-1c ~]$ asterx_set DASH345
   ### Query of LO Freq ###
   LO Freq = 345.000000000
   ### Set CLNA ###
   /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 345.000000000
   vd0=1.200000, id0=10.000000
   vd1=0.000000, id1=0.000000
   vd2=0.000000, id2=0.000000
   ASTE FEMC:OPEN
   FEMC_TCP 7 
   
   Ver 0.91
   > 
   Program running.
   Do not turn off power to CAN nodes.
   ---------- 45 4C 01 08 00 E1nd at Node index 00
   AMBSI CAN Library V1.1.2
   AMBSI Firmware V1.0.1
   FEMC Firmware V2.5.0
   FPGA V2.1.0
   10 F2 B3 58 2 8 0 1B
   1 A4 9A 4F 14 0 0 19
   23 9B DE 4C 1 0 0 44
   0 0 0 0 0 0 0 0
   > SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
   OK
   > SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
   OK
   > SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
   OK
   > SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
   OK
   > GET_CLNA 0 1 
   1.204880,10.052338,-0.278748,0.003311,0.012970,4.910278,0.003647,0.023651,4.910294,1
   > GET_CLNA 0 2 
   1.204895,10.045776,-0.381653,0.003250,0.022430,-4.848297,0.004089,0.022888,4.910248,1
   > GET_CLNA 1 1 
   1.205811,10.046082,-0.796448,0.003189,0.022278,-4.882111,0.003235,0.024567,-4.882172,1
   > GET_CLNA 1 2 
   1.206573,10.097809,-0.301575,0.003830,0.018616,-4.882095,0.003479,0.014343,4.931671,1
   > CAN_CLOSE
   CAN closed
   ASTE FEMC:CLOSE
   ### Set SIS bias ###
   /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 345.000000000
   345.000000 1.900000 1.900000 1.900000 1.900000
   ASTE FEMC:OPEN
   FEMC_TCP 7  
   
   Ver 0.91
   > 
   Program running.
   Do not turn off power to CAN nodes.
   ---------- 45 4C 01 08 00 E1nd at Node index 00
   AMBSI CAN Library V1.1.2
   AMBSI Firmware V1.0.1
   FEMC Firmware V2.5.0
   FPGA V2.1.0
   10 F2 B3 58 2 8 0 1B
   1 A4 9A 4F 14 0 0 19
   23 9B DE 4C 1 0 0 44
   0 0 0 0 0 0 0 0
   > SET_SIS_MODE 0 
   SET SIS MODE:CLOSE LOOP
   > SET_SIS_V 0 1 1.900 
   OK
   > SET_SIS_V 0 2 1.900 
   OK
   > SET_SIS_V 1 1 1.900 
   OK
   > SET_SIS_V 1 2 1.900 
   OK
   > GET_SIS_VC 0 1 
   1.785507,6.503296
   > GET_SIS_VC 0 2 
   1.786728,8.126831
   > GET_SIS_VC 1 1 
   1.805038,28.918457
   > GET_SIS_VC 1 2 
   1.812897,34.631348
   > CAN_CLOSE
   CAN closed
   ASTE FEMC:CLOSE
   ### Set LO Power ###
   /cosmos3/naoj/bin/loatt_dash345_tune 345.000000000
   /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 345.000000000
   /cosmos3/naoj/bin/loatt_dash345 225 310
   Set ATT     : Pol0=225, Pol1=310
    Pol0 =      225   , Pol1 =      310
    Pol0 = 0.005489[A], Pol1 = 0.007566[A]
    Pol0 = 0.658653[V], Pol1 = 0.776482[V]
   [asteobs@aste-1c ~]$  swbox_ctl_pol 0 1 
   [asteobs@aste-1c ~]$  swbox_ctl_pol     
   status: swbox_ctl_pol 0 1
   400:P0-USB	402:P1-USB
   [asteobs@aste-1c ~]$ cont_if 2 22 
   Cont IF #2 Att. = 21 [dB]
   changed Cont IF #2 att. = 22 [dB]
   recieved value = -2.25063000E-04
   
   recieved value = -2.25063000E-04
   Cont IF #2 Lev. = -0.000225 [V]
   [asteobs@aste-1c ~]$ cont_if 3 17 
   Cont IF #3 Att. = 0 [dB]
   changed Cont IF #3 att. = 0 [dB]
   recieved value = -1.19975000E-04 
   
   recieved value = -1.19975000E-04
   Cont IF #3 Lev. = -0.000120 [V]

                        ASTE Environment Monitor 2016/09/15 23:34:15
   
   ===================================ASTE Site===================================
     Temp. :  -1.63 C   Humid. : 13.99 % (  0.76 hPa )   Solar :  0.00 kW/m2
     Wind  :   4.82 m/s  241 deg   AirPressure : 573.31 hPa    ( Rain:  0.01 )
     Opacity @220 GHz :   0.0376
   ================================ Receiver Cabin ===============================
     Main Cabin:  19.6 C  Upper Cabin:  13.5 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
     SCD :   ----      ----      ----      ----
   ================================Observation Room===============================
     Temp. :  14.22 degC   Humid. :  4.56 %
     Digital BE:   17.50 degC   19.80 degC   21.60 degC   21.20 degC 
     Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
   -------------------------------Air Conditioners--------------------------------
     Internal Out     15.40 C   15.40 C   14.90 C   15.90 C   -7.60 C   16.70 C
     Internal Ret.    16.89 C   15.30 C   15.10 C    9.10 C   15.20 C   16.20 C
     External        168.60 C   -2.60 C    4.20 C  168.60 C
   ================================Antenna Shelter================================
     Air-cond. :    24.50 degC   21.90 degC   -1.40 degC
     Room Temp.:    21.50 degC

Radio pointing offsets in DASH345†

• UT23:31 t163-16C.start
  • OPT image OK

• UT23:39 istd3.list

  az, el = -91, 58
  daz, del = 0, 1

• UT00:34 crash & priority lost
  • connection to aste-c1c lost
    • confirmed no iPOT running and restarted iOPT
  • restarted istd3.list

    az, el = -96, 44

• envmon@UT0109

   Temp. :  -1.57 C   Humid. : 13.13 % (  0.71 hPa )   Solar :  0.00 kW/m2
   Wind  :   1.48 m/s  290 deg   AirPressure : 573.61 hPa    ( Rain:  0.01 )
   Opacity @220 GHz :   0.0507

• UT0213 observation "Emergency Stop"ped. Restart iOPT & istd3 dAz, dEl = 0, 1
• UT0221 stopped after the opt scan.

Standard sources in DASH345†

• UT0225 tuning /w M17C3ch

   Temp. :  -3.75 C   Humid. : 11.29 % (  0.52 hPa )   Solar :  0.00 kW/m2
   Wind  :   2.33 m/s  230 deg   AirPressure : 573.84 hPa    ( Rain:  0.01 )
   Opacity @220 GHz :   0.0453

• tuning log

  [asteobs@aste-1c ~]$ asterx_sw DASH345
  ### SYNTHE RF-OFF ###
  /cosmos3/naoj/bin/synthe_ctl B RF OFF
  FREQ = 12.966151717 [GHz]
  AMPL = 13.00 [dBm]
  RF   = ON
  ### After setting synthe ###
  FREQ = 12.966151717 [GHz]
  AMPL = 13.00 [dBm]
  RF   = OFF
  ### SWBOX changed ###
  /cosmos3/naoj/bin/swbox_ctl_rx 0
  ### SYNTHE set ###
  /cosmos3/naoj/bin/synthe_ctl B AMPL +20dBm
  FREQ = 12.966151717 [GHz]
  AMPL = 13.00 [dBm]
  RF   = OFF
  ### After setting synthe ###
  FREQ = 12.966151717 [GHz]
  AMPL = 20.00 [dBm]
  RF   = OFF
  /cosmos3/naoj/bin/synthe_ctl B RF ON
  FREQ = 12.966151717 [GHz]
  AMPL = 20.00 [dBm]
  RF   = OFF
  ### After setting synthe ###
  FREQ = 12.966151717 [GHz]
  AMPL = 20.00 [dBm]
  RF   = ON
  [asteobs@aste-1c ~]$ 
  [asteobs@aste-1c ~]$ 
  [asteobs@aste-1c ~]$ 
  [asteobs@aste-1c ~]$ synthe_ctl B FREQ 14.375
  FREQ = 12.966151717 [GHz]
  AMPL = 20.00 [dBm]
  RF   = ON
  ### After setting synthe ###
  FREQ = 14.375000000 [GHz]
  AMPL = 20.00 [dBm]
  RF   = ON
  [asteobs@aste-1c ~]$ asterx_set DASH345
  ### Query of LO Freq ###
  LO Freq = 345.000000000
  ### Set CLNA ###
  /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 345.000000000
  vd0=1.200000, id0=10.000000
  vd1=0.000000, id1=0.000000
  vd2=0.000000, id2=0.000000
  ASTE FEMC:OPEN
  FEMC_TCP 7 
  
  Ver 0.91
  > 
  Program running.
  Do not turn off power to CAN nodes.
  ---------- 45 4C 01 08 00 E1nd at Node index 00
  AMBSI CAN Library V1.1.2
  AMBSI Firmware V1.0.1
  FEMC Firmware V2.5.0
  FPGA V2.1.0
  10 F2 B3 58 2 8 0 1B
  1 A4 9A 4F 14 0 0 19
  23 9B DE 4C 1 0 0 44
  0 0 0 0 0 0 0 0
  > SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
  OK
  > SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
  OK
  > SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
  OK
  > SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
  OK
  > GET_CLNA 0 1 
  1.204880,10.052338,-0.278748,0.003311,0.012970,4.910278,0.003647,0.023651,4.910294,1
  > GET_CLNA 0 2 
  1.204895,10.045776,-0.381653,0.003250,0.022430,-4.848297,0.004089,0.022888,4.910248,1
  > GET_CLNA 1 1 
  1.205811,10.046082,-0.796448,0.003189,0.022278,-4.882111,0.003235,0.024567,-4.882172,1
  > GET_CLNA 1 2 
  1.206573,10.097809,-0.301575,0.003830,0.018616,-4.882095,0.003479,0.014343,4.931671,1
  > CAN_CLOSE
  CAN closed
  ASTE FEMC:CLOSE
  ### Set SIS bias ###
  /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 345.000000000
  345.000000 1.900000 1.900000 1.900000 1.900000
  ASTE FEMC:OPEN
  FEMC_TCP 7 
  
  Ver 0.91
  > 
  Program running.
  Do not turn off power to CAN nodes.
  ---------- 45 4C 01 08 00 E1nd at Node index 00
  AMBSI CAN Library V1.1.2
  AMBSI Firmware V1.0.1
  FEMC Firmware V2.5.0
  FPGA V2.1.0
  10 F2 B3 58 2 8 0 1B
  1 A4 9A 4F 14 0 0 19
  23 9B DE 4C 1 0 0 44
  0 0 0 0 0 0 0 0
  > SET_SIS_MODE 0 
  SET SIS MODE:CLOSE LOOP
  > SET_SIS_V 0 1 1.900 
  OK
  > SET_SIS_V 0 2 1.900 
  OK
  > SET_SIS_V 1 1 1.900 
  OK
  > SET_SIS_V 1 2 1.900 
  OK
  > GET_SIS_VC 0 1 
  1.785507,6.503296
  > GET_SIS_VC 0 2 
  1.786728,8.126831
  > GET_SIS_VC 1 1 
  1.805038,28.918457
  > GET_SIS_VC 1 2 
  1.812897,34.631348
  > CAN_CLOSE
  CAN closed
  ASTE FEMC:CLOSE
  ### Set LO Power ###
  /cosmos3/naoj/bin/loatt_dash345_tune 345.000000000
  /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 345.000000000
  /cosmos3/naoj/bin/loatt_dash345 225 310
  Set ATT     : Pol0=225, Pol1=310
   Pol0 =      225   , Pol1 =      310
   Pol0 = 0.005489[A], Pol1 = 0.007566[A]
   Pol0 = 0.658653[V], Pol1 = 0.776482[V]
  [asteobs@aste-1c ~]$  swbox_ctl_pol 0 1 
  [asteobs@aste-1c ~]$  swbox_ctl_pol     
  status: swbox_ctl_pol 0 1
  400:P0-USB	402:P1-USB
  [asteobs@aste-1c ~]$ cont_if 2 22 
  Cont IF #2 Att. = 21 [dB]
  changed Cont IF #2 att. = 22 [dB]
  recieved value = -2.25063000E-04
  
  recieved value = -2.25063000E-04
  Cont IF #2 Lev. = -0.000225 [V]
  [asteobs@aste-1c ~]$ cont_if 3 17 
  Cont IF #3 Att. = 0 [dB]
  changed Cont IF #3 att. = 0 [dB]
  recieved value = -1.19975000E-04
  
  recieved value = -1.19975000E-04
  Cont IF #3 Lev. = -0.000120 [V]
  [asteobs@aste-1c ~]$ asterx_set DASH345
  ### Query of LO Freq ###
  LO Freq = 351.555171528
  ### Set CLNA ###
  /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.555171528
  vd0=1.200000, id0=10.000000
  vd1=0.000000, id1=0.000000
  vd2=0.000000, id2=0.000000
  ASTE FEMC:OPEN
  FEMC_TCP 7 
  
  Ver 0.91
  > 
  Program running.
  Do not turn off power to CAN nodes.
  ---------- 45 4C 01 08 00 E1nd at Node index 00
  AMBSI CAN Library V1.1.2
  AMBSI Firmware V1.0.1
  FEMC Firmware V2.5.0
  FPGA V2.1.0
  10 F2 B3 58 2 8 0 1B
  1 A4 9A 4F 14 0 0 19
  23 9B DE 4C 1 0 0 44
  0 0 0 0 0 0 0 0
  > SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
  OK
  > SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
  OK
  > SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
  OK
  > SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
  OK
  > GET_CLNA 0 1 
  1.204910,10.061951,-0.277893,0.003296,0.012817,4.910233,0.003677,0.022430,4.910187,1
  > GET_CLNA 0 2 
  1.204987,10.065308,-0.381470,0.003250,0.023651,-4.848282,0.004120,0.021210,4.910110,1
  > GET_CLNA 1 1 
  1.205994,10.043793,-0.795547,0.003174,0.021515,-4.881958,0.003235,0.025482,-4.882050,1
  > GET_CLNA 1 2 
  1.206680,10.093994,-0.301086,0.003708,0.018921,-4.882187,0.003433,0.013885,4.931534,1
  > CAN_CLOSE
  CAN closed
  ASTE FEMC:CLOSE
  ### Set SIS bias ###
  /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.555171528
  351.555172 1.900000 1.900000 1.900000 1.900000
  ASTE FEMC:OPEN
  FEMC_TCP 7 
  
  Ver 0.91
  > 
  Program running.
  Do not turn off power to CAN nodes.
  ---------- 45 4C 01 08 00 E1nd at Node index 00
  AMBSI CAN Library V1.1.2
  AMBSI Firmware V1.0.1
  FEMC Firmware V2.5.0
  FPGA V2.1.0
  10 F2 B3 58 2 8 0 1B
  1 A4 9A 4F 14 0 0 19
  23 9B DE 4C 1 0 0 44
  0 0 0 0 0 0 0 0
  > SET_SIS_MODE 0 
  SET SIS MODE:CLOSE LOOP
  > SET_SIS_V 0 1 1.900 
  OK
  > SET_SIS_V 0 2 1.900 
  OK
  > SET_SIS_V 1 1 1.900 
  OK
  > SET_SIS_V 1 2 1.900 
  OK
  > GET_SIS_VC 0 1 
  1.783524,158.673096
  > GET_SIS_VC 0 2 
  1.788025,122.567749
  > GET_SIS_VC 1 1 
  1.810608,32.382202
  > GET_SIS_VC 1 2 
  1.814194,23.986816
  > CAN_CLOSE
  CAN closed
  ASTE FEMC:CLOSE
  ### Set LO Power ###
  /cosmos3/naoj/bin/loatt_dash345_tune 351.555171528
  /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.555171528
  /cosmos3/naoj/bin/loatt_dash345 293 286
  Set ATT     : Pol0=293, Pol1=286
   Pol0 =      293   , Pol1 =      286
   Pol0 = 0.007150[A], Pol1 = 0.006980[A]
   Pol0 = 0.667248[V], Pol1 = 0.768096[V]
  [asteobs@aste-1c ~]$ mmc1_rstop
  . mmc1 is up and running
  /cosmos3/naoj/sbin/mmc1_com.exe r
  Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
  20160916t022510z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
  20160916t022510z open_mmc('mmc1:8501'): socket '4' connect success.
  20160916t022510z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
  20160916t022510z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
  seq_r start.
  cmd_reset_all()
  20160916t022511z mmc1 r reset_all.
  mmc is active
  20160916t022511z mmc1 is active.
  mode=0000 0
  mode=1000 4096
  mode=0000 0
  position 'R' verify ok.
  seq_r end.
  20160916t022513z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
  20160916t022513z close_mmc(): socket '4' closed.
  20160916t022513z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
  [asteobs@aste-1c ~]$ ifeo_tune 1 0.030
  volt=0.030000
      E/O att. = 14 dB      E/O att. = 14 dB    IF level=0.036272
  new E/O att. = 14 dB    IF level=0.036697
  new E/O att. = 16 dB    IF level=0.021677
  new E/O att. = 14 dB    IF level=0.038955
  14 dB  0.038955 V
  [asteobs@aste-1c ~]$ ifeo_tune 2 0.050
  volt=0.050000
      E/O att. = 15 dB    IF level=0.062566
  new E/O att. = 15 dB    IF level=0.057304
  new E/O att. = 16 dB    IF level=0.043079
  new E/O att. = 15 dB    IF level=0.061904
  new E/O att. = 16 dB    IF level=0.043266
  16 dB  0.043266 V
  [asteobs@aste-1c ~]$ yfactor 1
  Execute /cosmos3/naoj/bin/mmc1_rstop
  . mmc1 is up and running
  /cosmos3/naoj/sbin/mmc1_com.exe r
  Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
  seq_r start.
  seq_r end.
  20160916t022558z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
  20160916t022558z open_mmc('mmc1:8501'): socket '8' connect success.
  20160916t022558z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
  20160916t022558z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
  cmd_reset_all()
  20160916t022558z mmc1 r reset_all.
  mmc is active
  20160916t022558z mmc1 is active.
  mode=0000 0
  mode=1000 4096
  mode=0000 0
  position 'R' verify ok.
  20160916t022600z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
  20160916t022600z close_mmc(): socket '8' closed.
  20160916t022600z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
  Execute /cosmos3/naoj/bin/ifeo 1
      E/O att. = 14 dB
   E/O IF level = 0.036221 V
  Execute /cosmos3/naoj/bin/mmc1_sstop
  . mmc1 is up and running
  /cosmos3/naoj/sbin/mmc1_com.exe sky
  Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
  seq_sky start.
  seq_sky end.
  20160916t022603z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
  20160916t022603z open_mmc('mmc1:8501'): socket '8' connect success.
  20160916t022603z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
  20160916t022603z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
  cmd_reset_all()
  20160916t022604z mmc1 sky reset_all.
  mmc is active
  20160916t022604z mmc1 is active.
  mode=0000 0
  mode=2000 8192
  mode=0000 0
  position 'SKY' verify ok.
  20160916t022606z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
  20160916t022606z close_mmc(): socket '8' closed.
  20160916t022606z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
  Execute /cosmos3/naoj/bin/ifeo 1
      E/O att. = 14 dB
   E/O IF level = 0.017209 V
  R=0.036221 V,  Sky=0.017209 V, Y=3.232048 dB
  3.232048
  [asteobs@aste-1c ~]$ yfactor 2
  Execute /cosmos3/naoj/bin/mmc1_rstop
  . mmc1 is up and running
  /cosmos3/naoj/sbin/mmc1_com.exe r
  Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
  seq_r start.
  seq_r end.
  20160916t022619z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
  20160916t022619z open_mmc('mmc1:8501'): socket '8' connect success.
  20160916t022619z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
  20160916t022619z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
  cmd_reset_all()
  20160916t022620z mmc1 r reset_all.
  mmc is active
  20160916t022620z mmc1 is active.
  mode=0000 0
  mode=1000 4096
  mode=0000 0
  position 'R' verify ok.
  20160916t022622z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
  20160916t022622z close_mmc(): socket '8' closed.
  20160916t022622z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
  Execute /cosmos3/naoj/bin/ifeo 2
      E/O att. = 16 dB
   E/O IF level = 0.045119 V
  Execute /cosmos3/naoj/bin/mmc1_sstop
  . mmc1 is up and running
  /cosmos3/naoj/sbin/mmc1_com.exe sky
  Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
  seq_sky start.
  seq_sky end.
  20160916t022625z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
  20160916t022625z open_mmc('mmc1:8501'): socket '8' connect success.
  20160916t022625z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
  20160916t022625z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
  cmd_reset_all()
  20160916t022625z mmc1 sky reset_all.
  mmc is active
  20160916t022625z mmc1 is active.
  mode=0000 0
  mode=2000 8192
  mode=0000 0
  position 'SKY' verify ok.
  20160916t022628z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
  20160916t022628z close_mmc(): socket '8' closed.
  20160916t022628z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
  Execute /cosmos3/naoj/bin/ifeo 2
      E/O att. = 16 dB
   E/O IF level = 0.024406 V
  R=0.045119 V,  Sky=0.024406 V, Y=2.668629 dB
  2.668629
  [asteobs@aste-1c ~]$

• UT0230 pointing WAQD3pw
  • ->dAz, dEl = 1, 2.9

• UT0236 M17C3ch start
  • A1&A2 (P1) are good, A3&A4 (P0) too weak

    #ref(): File not found: "Screenshot-5.png" at page "Observing Log/2016-09-16"

• UT0xxx M17C3cw start
  • A1&A2 (P1) are good, A3&A4 (P0) too weak
  • suprious? signals at +-120km/s from the CO3-2 line

    #ref(): File not found: "Screenshot-6.png" at page "Observing Log/2016-09-16"

• UT03xx test1.start (USB side of M17C3cw)
  • suprious also in the USB side

    #ref(): File not found: "Screenshot-7.png" at page "Observing Log/2016-09-16"

• UT0352 test2.start (same as test1 but with Fif = 5.85GHz)
  • suprious makes frequency shift with the main line

    #ref(): File not found: "Screenshot-8.png" at page "Observing Log/2016-09-16"

• UT0600 OCTF3ph (pointing) dAz, dEl = 1, 2.9
  • restart COS3@MTK due to Qlook trouble (range error)
• UT0608 restart OCTF3ph
  • error again. restart cosmos on aste-1c
  • error again. gave up using this obsfile
• UT0633 OCFT3pw dAz, dEl = 1, 2.9
  • qlook worked! Seems the default settings for the fitting ranges are too wide for the high-res mode.
  • dAl, dEl = 2, 5
• UT0638 OKLC3ch start
  • UT0645 stopped after 12 scans
• UT064x OKLC3cw start
  • UT0652 stopped after 11 scans
• UT0700 OKLC3c2 tune
  • whsf_rsky

    	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
    	23.2	24.8	29.1	22.2	33.5	38.8	43.8	33.0	[mV]

	Result: R-SKY
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	3.964	3.799	3.061	4.208	4.119	3.603	3.158	4.316	[dB]

	Result: Tsys[Tamb=293K]
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	196.5	209.6	286.3	179.2	185.3	226.7	274.0	172.2	[K]

• whsf_stab

  	*** average ***
  	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
  	20.5	2.0	20.2	73.8	18.7	47.5	-75.9	40.7	[mV]

	*** stability ***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	2426.41	25550.37	2265.37	733.03	2548.96	927.02	-673.88	1159.38	[%]

• minakatta kotoni suru

• UT0706 OKLC3c2 start
  • UT0726 error. Repeated messages "now reconnecting ... (1/100)"
  • cannot control antenna console
  • envmon, asp-mon, and man-gui are alive.
• UT0746 restart cos3@MTK
  • did not work
• UT0750 restart cos3@ASTE
  • worked. antenna console is back
• UT0756 OKLC3c2 start

  #ref(): File not found: "Screenshot-9.png" at page "Observing Log/2016-09-16"

  • X1 & X2 : USB P1, P0
  • X3 & X4 : LSB P1, P0
  • intensity scale of LSB,P0 appears wrong
• UT0810 antenna parked. priority released