History of Observing Log/2016-09-14 (No. 4)

• History
• View the source.
• Observing Log/2016-09-14 has been deleted.
  • 1 (2016-09-13 (Tue) 22:38:40)
  • 2 (2016-09-13 (Tue) 22:53:18)
  • 3 (2016-09-14 (Wed) 10:04:32)
  • 4 (2016-09-14 (Wed) 15:28:07)

---

Observing Log

---

---

CSV2016: Radio pointing offsets of DASH345/BAND8 (2016-09-14)†

Tasks†

• 220GHz opacity <= 0.07 -> Radio pointing offsets in BAND8
• 220GHz opacity > 0.07 -> Radio pointing offsets in DASH345
• After Saturn sets, long time integration toward O Cet in BAND8

Preparations†

1. Basic checks
   • Record which kisa files are used for DASH345 and BAND8

   aste16@aste-ms1: ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
   -rw-r--r-- 1 astecntl astctl 771 Sep 10 09:38 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.160910
   -rw-r--r-- 1 astecntl astctl 769 Sep 10 09:32 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.160910

   • Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
   • Check Aspirin is working in the "WIND" mode
2. Tuning at EL=60.0 deg
   • Tuning of DASH345/BAND8 for continuum observations
   • Don't forget to record weather conditions

Radio pointing offsets of DASH345/BAND8†

• Its instruction is HERE

1. Repeat cross scans toward Saturn and shots of a star one after the other
2. Data reduction
   • Still under preparation

Long time integration toward O Cet in BAND8 CO(J=4-3) LSB with MAC (HIGH)†

• Observation tables
  • Pointing: aste16/linux16/tOCC4ph.start
  • OTF (X-direction): aste16/linux16/tOCC4rh.start
  • OTF (Y-direction): aste16/linux16/tOCC4sh.start
• Repeat the two OTF tables one after the other
• Carry out pointing every 1 hour
  • Don't forget to record daz and del in order to use them for radio pointing at various az and el angles

---

Information†

• Observers: Tanaka, Matsui
• Site: Mitaka
• Weather conditions (2016-09-14Txx:xx)

  Temperature: xxx C
  Humidity: xxx hPa
  Wind: xxx m/s (xxx deg)
  220GHz opacity: xxx

Radio Pointing Logs†

• Tuning

   Temp. :   0.40 C   Humid. :  8.36 % (  0.53 hPa )   Solar :  0.00 kW/m2
   Wind  :   8.87 m/s  272 deg   AirPressure : 572.90 hPa    ( Rain:  0.01 )
   Opacity @220 GHz :   0.0567

 [asteobs@aste-1c ~]$ swbox_ctl_be CONT 
 [asteobs@aste-1c ~]$ swbox_ctl_be
 status: swbox_ctl_be CONT
 [asteobs@aste-1c ~]$ asterx_sw BAND8 synthe_ctl B FREQ 11.444
 ### SYNTHE RF-OFF ###
 /cosmos3/naoj/bin/synthe_ctl B RF OFF
 FREQ = 12.966181108 [GHz]
 AMPL = 13.00 [dBm]
 RF   = ON
 ### After setting synthe ###
 FREQ = 12.966181108 [GHz]
 AMPL = 13.00 [dBm]
 RF   = OFF
 ### SWBOX changed ###
 /cosmos3/naoj/bin/swbox_ctl_rx 1
 ### SYNTHE set ###
 /cosmos3/naoj/bin/synthe_ctl B AMPL +13dBm
 FREQ = 12.966181108 [GHz]
 AMPL = 13.00 [dBm]
 RF   = OFF
 ### After setting synthe ###
 FREQ = 12.966181108 [GHz]
 AMPL = 13.00 [dBm]
 RF   = OFF
 /cosmos3/naoj/bin/synthe_ctl B RF ON
 FREQ = 12.966181108 [GHz]
 AMPL = 13.00 [dBm]
 RF   = OFF
 ### After setting synthe ###
 FREQ = 12.966181108 [GHz]
 AMPL = 13.00 [dBm]
 RF   = ON
 [asteobs@aste-1c ~]$ synthe_ctl B FREQ 11.444
 FREQ = 12.966181108 [GHz]
 AMPL = 13.00 [dBm]
 RF   = ON
 ### After setting synthe ###
 FREQ = 11.444000000 [GHz]
 AMPL = 13.00 [dBm]
 RF   = ON
 [asteobs@aste-1c ~]$ asterx_set BAND8
 ### Query of LO Freq ###
 LO Freq = 411.984000000
 ### Set CLNA ###
 /cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 411.984000000
 vd0=0.650000, id0=5.000000
 vd1=0.600000, id1=4.500000
 vd2=0.600000, id2=4.500000
 ASTE FEMC:OPEN
 CAN_OPEN 8 FEMC_TCP
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50 
 OK
 > SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50 
 OK
 > SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50 
 OK
 > SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50 
 OK
 > GET_CLNA 0 1 
 0.654663,5.028076,-0.174881,0.603928,4.533386,-0.197311,0.604721,4.543762,-0.203964,1
 > GET_CLNA 0 2 
 0.653793,5.039825,-0.194672,0.604324,4.558411,-0.195068,0.604034,4.552155,-0.202301,1
 > GET_CLNA 1 1 
 0.654114,5.035095,-0.182678,0.604172,4.548492,-0.209717,0.604202,4.520874,-0.271118,1
 > GET_CLNA 1 2 
 0.654221,5.016479,-0.170517,0.604691,4.553528,-0.193268,0.604431,4.514465,-0.200516,1
 > CAN_CLOSE
 CAN closed
 > EXITASTE FEMC:CLOSE
 ### Set Electro-magnet ###
 /cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 411.984000000
 v=12.800000, 13.400000, 10.400000, 19.100000
 ASTE FEMC:OPEN
 CAN_OPEN 8 FEMC_TCP
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > ACT_DEMAG 0 1 30.00 1.00 100 
 OK
 > ACT_DEMAG 0 2 30.00 1.00 100 
 OK
 > ACT_DEMAG 1 1 30.00 1.00 100 
 OK
 > ACT_DEMAG 1 2 30.00 1.00 100 
 OK
 > SET_MAG_C 0 1 12.80 
 OK
 > SET_MAG_C 0 2 13.40 
 OK
 > SET_MAG_C 1 1 10.40 
 OK
 > SET_MAG_C 1 2 19.10 
 OK
 > GET_MAG_VC 0 1 
 0.170639,12.333298
 > GET_MAG_VC 0 2 
 0.170975,12.931824
 > GET_MAG_VC 1 1 
 0.136017,9.861374
 > GET_MAG_VC 1 2 
 0.261475,18.748093
 > CAN_CLOSE
 CAN closed
 > EXITASTE FEMC:CLOSE
 ### Set SIS bias ###
 /cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 411.984000000
 411.984000 2.001608 2.049580 1.996820 1.957012
 ASTE FEMC:OPEN
 CAN_OPEN 8 FEMC_TCP
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_SIS_MODE 0 
 SET SIS MODE:CLOSE LOOP
 > SET_SIS_V 0 1 2.002 
 OK
 > SET_SIS_V 0 2 2.050 
 OK
 > SET_SIS_V 1 1 1.997 
 OK
 > SET_SIS_V 1 2 1.957 
 OK
 > GET_SIS_VC 0 1 
 1.913071,56.277466
 > GET_SIS_VC 0 2 
 1.960907,48.022461
 > GET_SIS_VC 1 1 
 1.916809,25.842285
 > GET_SIS_VC 1 2 
 1.952286,977.136230
 > CAN_CLOSE
 CAN closed
 > EXITASTE FEMC:CLOSE
 ### Set LO Power ###
 /cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 411.984000000
 v=1.828200, -0.300000, 2.500000, -0.350000
 ASTE FEMC:OPEN
 CAN_OPEN 8 FEMC_TCP
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_PA_VD 0 1.83 
 OK
 > SET_PA_VG 0 -0.30 
 OK
 > SET_PA_VD 1 2.50 
 OK
 > SET_PA_VG 1 -0.35 
 OK
 > GET_PA 0 
 2.965546,247.680664,-0.290833
 > GET_PA 1 
 4.022064,254.943848,-0.345459
 > CAN_CLOSE
 CAN closed
 > EXITASTE FEMC:CLOSE
 [asteobs@aste-1c ~]$ swbox_ctl_pol 1 0  
 [asteobs@aste-1c ~]$ swbox_ctl_pol
 status: swbox_ctl_pol 1 0
 400:P1-LSB	402:P0-LSB
 [asteobs@aste-1c ~]$ cont_if 2 21     
 Cont IF #2 Att. = 22 [dB]
 changed Cont IF #2 att. = 21 [dB]
 recieved value = -3.35029000E-04
 
 recieved value = -3.35029000E-04
 Cont IF #2 Lev. = -0.000335 [V]
 [asteobs@aste-1c ~]$  cont_if 3 23
 Cont IF #3 Att. = 0 [dB]
 changed Cont IF #3 att. = 0 [dB]
 recieved value = -4.12800000E-06
 
 recieved value = -4.12800000E-06
 Cont IF #3 Lev. = -0.000004 [V]
 [asteobs@aste-1c ~]$ 
 [asteobs@aste-1c ~]$ 
 [asteobs@aste-1c ~]$ 
 [asteobs@aste-1c ~]$ swbox_ctl_be
 status: swbox_ctl_be CONT
 [asteobs@aste-1c ~]$ asterx_sw BAND8
 ### SYNTHE RF-OFF ###
 /cosmos3/naoj/bin/synthe_ctl B RF OFF
 FREQ = 11.444000000 [GHz]
 AMPL = 13.00 [dBm]
 RF   = ON
 ### After setting synthe ###
 FREQ = 11.444000000 [GHz]
 AMPL = 13.00 [dBm]
 RF   = OFF
 ### SWBOX changed ###
 /cosmos3/naoj/bin/swbox_ctl_rx 1
 ### SYNTHE set ###
 /cosmos3/naoj/bin/synthe_ctl B AMPL +13dBm
 FREQ = 11.444000000 [GHz]
 AMPL = 13.00 [dBm]
 RF   = OFF
 ### After setting synthe ###
 FREQ = 11.444000000 [GHz]
 AMPL = 13.00 [dBm]
 RF   = OFF
 /cosmos3/naoj/bin/synthe_ctl B RF ON
 FREQ = 11.444000000 [GHz]
 AMPL = 13.00 [dBm]
 RF   = OFF
 ### After setting synthe ###
 FREQ = 11.444000000 [GHz]
 AMPL = 13.00 [dBm]
 RF   = ON
 [asteobs@aste-1c ~]$ asterx_sw
 usage: asterx_sw [DASH345/BAND8]
 [asteobs@aste-1c ~]$ asterx_set BAND8
 ### Query of LO Freq ###
 LO Freq = 411.984000000
 ### Set CLNA ###
 /cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 411.984000000
 vd0=0.650000, id0=5.000000
 vd1=0.600000, id1=4.500000
 vd2=0.600000, id2=4.500000
 ASTE FEMC:OPEN
 CAN_OPEN 8 FEMC_TCP
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50 
 OK
 > SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50 
 OK
 > SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50 
 OK
 > SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50 
 OK
 > GET_CLNA 0 1 
 0.654694,5.027313,-0.174637,0.604019,4.531860,-0.197006,0.604614,4.548492,-0.203781,1
 > GET_CLNA 0 2 
 0.653809,5.038757,-0.194550,0.604324,4.559631,-0.194870,0.604065,4.553680,-0.202103,1
 > GET_CLNA 1 1 
 0.654144,5.035553,-0.182388,0.604202,4.548035,-0.209549,0.604279,4.519958,-0.270828,1
 > GET_CLNA 1 2 
 0.654236,5.018921,-0.170166,0.604736,4.552612,-0.193054,0.604309,4.511261,-0.200165,1
 > CAN_CLOSE
 CAN closed
 > EXITASTE FEMC:CLOSE
 ### Set Electro-magnet ###
 /cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 411.984000000
 v=12.800000, 13.400000, 10.400000, 19.100000
 ASTE FEMC:OPEN
 CAN_OPEN 8 FEMC_TCP
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > ACT_DEMAG 0 1 30.00 1.00 100 
 OK
 > ACT_DEMAG 0 2 30.00 1.00 100 
 OK
 > ACT_DEMAG 1 1 30.00 1.00 100 
 OK
 > ACT_DEMAG 1 2 30.00 1.00 100 
 OK
 > SET_MAG_C 0 1 12.80 
 OK
 > SET_MAG_C 0 2 13.40 
 OK
 > SET_MAG_C 1 1 10.40 
 OK
 > SET_MAG_C 1 2 19.10 
 OK
 > GET_MAG_VC 0 1 
 0.171616,12.336349
 > GET_MAG_VC 0 2 
 0.171066,12.928772
 > GET_MAG_VC 1 1 
 0.135437,9.862137
 > GET_MAG_VC 1 2 
 0.262268,18.750763
 > CAN_CLOSE
 CAN closed
 > EXITASTE FEMC:CLOSE
 ### Set SIS bias ###
 /cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 411.984000000
 411.984000 2.001608 2.049580 1.996820 1.957012
 ASTE FEMC:OPEN
 CAN_OPEN 8 FEMC_TCP
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_SIS_MODE 0 
 SET SIS MODE:CLOSE LOOP
 > SET_SIS_V 0 1 2.002 
 OK
 > SET_SIS_V 0 2 2.050 
 OK
 > SET_SIS_V 1 1 1.997 
 OK
 > SET_SIS_V 1 2 1.957 
 OK
 > GET_SIS_VC 0 1 
 1.937103,97.882080
 > GET_SIS_VC 0 2 
 1.965103,76.672363
 > GET_SIS_VC 1 1 
 1.916580,25.726318
 > GET_SIS_VC 1 2 
 1.980972,976.876831
 > CAN_CLOSE
 CAN closed
 > EXITASTE FEMC:CLOSE
 ### Set LO Power ###
 /cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 411.984000000
 v=1.828200, -0.300000, 2.500000, -0.350000
 ASTE FEMC:OPEN
 CAN_OPEN 8 FEMC_TCP
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_PA_VD 0 1.83 
 OK
 > SET_PA_VG 0 -0.30 
 OK
 > SET_PA_VD 1 2.50 
 OK
 > SET_PA_VG 1 -0.35 
 OK
 > GET_PA 0 
 2.966003,247.589111,-0.290833
 > GET_PA 1 
 4.021454,254.577637,-0.345306
 > CAN_CLOSE
 CAN closed
 > EXITASTE FEMC:CLOSE
 [asteobs@aste-1c ~]$ swbox_ctl_pol
 status: swbox_ctl_pol 1 0
 400:P1-LSB	402:P0-LSB
 
 [asteobs@aste-1c ~]$  cont_if 2 21               
 Cont IF #2 Att. = 22 [dB]
 changed Cont IF #2 att. = 21 [dB]
 recieved value = -2.45830000E-04
 
 recieved value = -2.45830000E-04
 Cont IF #2 Lev. = -0.000246 [V]
 [asteobs@aste-1c ~]$ cont_if 3 23 
 Cont IF #3 Att. = 0 [dB]
 changed Cont IF #3 att. = 0 [dB]
 recieved value = -6.11760000E-05
 
 recieved value = -6.11760000E-05
 Cont IF #3 Lev. = -0.000061 [V]

• UT-0020 istx5b8 start
  • too noisy!
  • Tsys = 200 K

    #ref(): File not found: "Screenshot.png" at page "Observing Log/2016-09-14"

• UT-0030 tune & start istx5b8 again
  • too noisy, again

    #ref(): File not found: "Screenshot-1.png" at page "Observing Log/2016-09-14"

  • a little better?

• UT00-10 tune DASH345

   [asteobs@aste-1c ~]$ asterx_sw DASH345     
   ### SYNTHE RF-OFF ###
   /cosmos3/naoj/bin/synthe_ctl B RF OFF
   FREQ = 11.444000000 [GHz]
   AMPL = 13.00 [dBm]
   RF   = ON
   ### After setting synthe ###
   FREQ = 11.444000000 [GHz]
   AMPL = 13.00 [dBm]
   RF   = OFF
   ### SWBOX changed ###
   /cosmos3/naoj/bin/swbox_ctl_rx 0
   ### SYNTHE set ###
   /cosmos3/naoj/bin/synthe_ctl B AMPL +20dBm
   FREQ = 11.444000000 [GHz]
   AMPL = 13.00 [dBm]
   RF   = OFF
   ### After setting synthe ###
   FREQ = 11.444000000 [GHz]
   AMPL = 20.00 [dBm]
   RF   = OFF
   /cosmos3/naoj/bin/synthe_ctl B RF ON
   FREQ = 11.444000000 [GHz]
   AMPL = 20.00 [dBm]
   RF   = OFF
   ### After setting synthe ###
   FREQ = 11.444000000 [GHz]
   AMPL = 20.00 [dBm]
   RF   = ON
   [asteobs@aste-1c ~]$  synthe_ctl B FREQ 14.375 
   FREQ = 11.444000000 [GHz]
   AMPL = 20.00 [dBm]
   RF   = ON
   ### After setting synthe ###
   FREQ = 14.375000000 [GHz]
   AMPL = 20.00 [dBm]
   RF   = ON
   [asteobs@aste-1c ~]$  asterx_set DASH345
   ### Query of LO Freq ###
   LO Freq = 345.000000000
   ### Set CLNA ###
   /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 345.000000000
   vd0=1.200000, id0=10.000000
   vd1=0.000000, id1=0.000000
   vd2=0.000000, id2=0.000000
   ASTE FEMC:OPEN
   CAN_OPEN 7 
   FEMC_TCP
   
   
   Ver 0.91
   
   > 
   
   Program running.
   Do not turn off power to CAN nodes.
   
   
   CAN node with adress x13 found at Node index 00
   S/N: 10 79 45 4C 01 08 00 E1
   ----------
   
   
   AMBSI CAN Library V1.1.2
   
   AMBSI Firmware V1.0.1
   
   FEMC Firmware V2.5.0
   
   FPGA V2.1.0
   
   10 F2 B3 58 2 8 0 1B
   
   1 A4 9A 4F 14 0 0 19
   
   23 9B DE 4C 1 0 0 44
   
   0 0 0 0 0 0 0 0
   
   > SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
   
   
   OK
   
   > SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
   
   
   OK
   
   > SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
   
   
   OK
   
   > SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
   
   
   OK
   
   > GET_CLNA 0 1 
   
   
   1.205093,10.061493,-0.278336,0.003296,0.013428,4.909836,0.003662,0.021973,4.909775,1
   
   > GET_CLNA 0 2 
   
   
   1.204941,10.052643,-0.382217,0.003250,0.022888,-4.847961,0.004074,0.021973,4.909775,1
   
   > GET_CLNA 1 1 
   
   
   1.205811,10.031738,-0.795395,0.003143,0.021667,-4.882019,0.003220,0.023956,-4.881989,1
   
   > GET_CLNA 1 2 
   
   
   1.206604,10.094757,-0.301697,0.003738,0.019073,-4.882004,0.003387,0.013123,4.931473,1
   
   > CAN_CLOSE
   
   
   CAN closed
   
   > EXIT
   ASTE FEMC:CLOSE
   ### Set SIS bias ###
   /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 345.000000000
   345.000000 1.900000 1.900000 1.900000 1.900000
   ASTE FEMC:OPEN
   CAN_OPEN 7 
   FEMC_TCP
   
   
   Ver 0.91
   
   > 
   
   Program running.
   Do not turn off power to CAN nodes.
   
   
   CAN node with adress x13 found at Node index 00
   S/N: 10 79 45 4C 01 08 00 E1
   ----------
   
   
   AMBSI CAN Library V1.1.2
   
   AMBSI Firmware V1.0.1
   
   FEMC Firmware V2.5.0
   
   FPGA V2.1.0
   
   10 F2 B3 58 2 8 0 1B
   
   1 A4 9A 4F 14 0 0 19
   
   23 9B DE 4C 1 0 0 44
   
   0 0 0 0 0 0 0 0
   
   > SET_SIS_MODE 0 
   
   
   SET SIS MODE:CLOSE LOOP
   
   > SET_SIS_V 0 1 1.900 
   
   
   OK
   
   > SET_SIS_V 0 2 1.900 
   
   
   OK
   
   > SET_SIS_V 1 1 1.900 
   
   
   OK
   
   > SET_SIS_V 1 2 1.900 
   
   
   OK
   
   > GET_SIS_VC 0 1 
   
   
   1.790543,18.161011
   
   > GET_SIS_VC 0 2 
   
   
   1.792450,22.998047
   
   > GET_SIS_VC 1 1 
   
   
   1.812897,16.348267
   
   > GET_SIS_VC 1 2 
   
   
   1.818848,20.159912
   
   > CAN_CLOSE
   
   
   CAN closed
   
   > EXIT
   ASTE FEMC:CLOSE
   ### Set LO Power ###
   /cosmos3/naoj/bin/loatt_dash345_tune 345.000000000
   /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 345.000000000
   /cosmos3/naoj/bin/loatt_dash345 225 310
   Set ATT     : Pol0=225, Pol1=310
    Pol0 =      225   , Pol1 =      310
    Pol0 = 0.005490[A], Pol1 = 0.007567[A]
    Pol0 = 0.661290[V], Pol1 = 0.777607[V]
   [asteobs@aste-1c ~]$  swbox_ctl_pol 0 1    
   [asteobs@aste-1c ~]$ swbox_ctl_pol
   status: swbox_ctl_pol 0 1
   400:P0-USB	402:P1-USB
   [asteobs@aste-1c ~]$ cont_if 2 22 
   Cont IF #2 Att. = 21 [dB]
   cont_if 3 17  changed Cont IF #2 att. = 22 [dB]
   recieved value = -7.51000000E-07
   
   recieved value = -7.51000000E-07
   Cont IF #2 Lev. = -0.000001 [V]
   [asteobs@aste-1c ~]$ cont_if 3 17  
   Cont IF #3 Att. = 0 [dB]
   changed Cont IF #3 att. = 0 [dB]
   recieved value = -2.15555000E-04
   
   recieved value = -2.15555000E-04
   Cont IF #3 Lev. = -0.000216 [V]

• UT-0005 start istx5d3

   Temp. :   0.27 C   Humid. :  8.55 % (  0.53 hPa )   Solar :  0.00 kW/m2
   Wind  :   7.31 m/s  269 deg   AirPressure : 573.04 hPa    ( Rain:  0.01 )
   Opacity @220 GHz :   0.0610

  • dAz, dEl -> +1, +7

• UT-0006 start /cosmos3/naoj/sbinSol/iOPT_r17shm on aste-c1c
• UT-0006 batch execution istd3 started
• envmon@UT0104

   Temp. :   2.49 C   Humid. :  4.85 % (  0.35 hPa )   Solar :  0.00 kW/m2
   Wind  :   6.39 m/s  260 deg   AirPressure : 573.52 hPa    ( Rain:  0.01 )
   Opacity @220 GHz :   0.0501

• done @approx. UT0230

Logs of Long-time integration†

• UT0427 tOCC4ph start (pointing)
  • cannot view the ql monitor. Error 'range over' appears.
• UT0431 restart obs.
• UT0445 stop

Logs of inspection of BAND8-gizagiza†

• UT0446 iroiro yatta
  • aste16:ast0120:rrrb8.start
  • monitored the R level at fLO = 467 GHz.
• Very unstable level orz...
  • El = 60 deg

    #ref(): File not found: "Screenshot-460GHz-R.png" at page "Observing Log/2016-09-14"

  • El = 20 deg.

    #ref(): File not found: "Screenshot-460GHz-R-El20.png" at page "Observing Log/2016-09-14"