History of Observing Log/2016-08-26 (No. 4)

• History
• View the source.
• Observing Log/2016-08-26 has been deleted.
  • 1 (2016-08-26 (Fri) 08:30:28)
  • 2 (2016-08-26 (Fri) 11:42:43)
  • 3 (2016-08-26 (Fri) 12:49:18)
  • 4 (2016-09-01 (Thu) 18:13:39)

---

Observing Log

---

---

CSV2016: Subref tilt offsets of DASH345/BAND8 (2016-08-26)†

Tasks†

• 220GHz opacity <= 0.07 -> Subref tilt offsets in BAND8
• 220GHz opacity > 0.07 -> Subref tilt offsets in DASH345

Preparations†

1. Basic checks
   • Record which kisa files are used for DASH345 and BAND8

   aste16@aste-ms1: ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
   lrwxrwxrwx 1 astecntl astctl 12 Jun  3  2015 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.150603
   lrwxrwxrwx 1 astecntl astctl 12 Jun  1  2015 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.150601

   • Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
   • Check Aspirin is working in the "WIND ON" mode
2. Tuning at EL=60.0 deg
   • Tuning of DASH345/BAND8 for continuum observations
   • Don't forget to record weather conditions

Subref tilt offsets in DASH345/BAND8†

1. Repeat cross scans toward Saturn with various (dtx,dty)
   • Pointing toward Saturn

     BAND8:   stx5b8.start
     DASH345: stx5d3.start

   • Repeat cross scans toward Saturn using the batch mode

     BAND8:   ststb8.list (NOT stsbb8.list)
     DASH345: ststd3.list (NOT stsbd3.list)

     • Don't forget to turn on auto-pointing in the QLOOKC GUI
     • Set AVERAGE = 1 in the QLOOKC GUI
2. Data reduction
   • Still under preparation

---

Information†

• Observers: Kamazaki
• Site: Mitaka
• Weather conditions (2016-08-25T23:36)

  Temperature: -0.33 C
  Humidity: 0.70 hPa
  Wind: 4.10 m/s (259 deg)
  220GHz opacity: 0.0273

220GHz opacity <= 0.07 -> Subref tilt offsets in BAND8†

Preparation†

1. Basic checks
   • KISA files

     [aste16@aste-ms1 ~]$ ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
     lrwxrwxrwx 1 astecntl astctl 12 Jun  3  2015 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.150603
     lrwxrwxrwx 1 astecntl astctl 12 Jun  1  2015 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.150601

   • All subref parameters are zeros
   • Aspirin is ok

     Current time = 2016/08/25 23:57:00
     Aspirin time = 2016/08/25 23:56:58
     Weather time = 2016/08/25 23:56:50
     Aspirin Offset : (Az, El) = (   3.20,  -5.26 )
     Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
     Refraction Corr. status : OK

Tuning†

• BAND8

  [asteobs@aste-1c ~]$ swbox_ctl_be CONT
  [asteobs@aste-1c ~]$ swbox_ctl_be
  status: swbox_ctl_be CONT

  [asteobs@aste-1c ~]$ asterx_sw BAND8
  ...
  ### After setting synthe ###
  FREQ = 11.444000000 [GHz]
  AMPL = 13.00 [dBm]
  RF   = ON

  [asteobs@aste-1c ~]$ asterx_set BAND8
  ### Query of LO Freq ###
  LO Freq = 411.984000000
  ### Set CLNA ###
  /cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 411.984000000
  vd0=0.650000, id0=5.000000
  vd1=0.600000, id1=4.500000
  vd2=0.600000, id2=4.500000
  ASTE FEMC:OPEN
  FEMC_TCP 8 
  
  Ver 0.91
  > 
  Program running.
  Do not turn off power to CAN nodes.
  ---------- 45 4C 01 08 00 E1nd at Node index 00
  AMBSI CAN Library V1.1.2
  AMBSI Firmware V1.0.1
  FEMC Firmware V2.5.0
  FPGA V2.1.0
  10 F2 B3 58 2 8 0 1B
  1 A4 9A 4F 14 0 0 19
  23 9B DE 4C 1 0 0 44
  0 0 0 0 0 0 0 0
  > SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50 
  OK
  > SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50 
  OK
  > SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50 
  OK
  > SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50 
  OK
  > GET_CLNA 0 1 
  0.654633,5.025330,-0.175034,0.604050,4.530029,-0.197128,0.604660,4.553070,-0.204056,1
  > GET_CLNA 0 2 
  0.653854,5.041656,-0.194824,0.604248,4.559326,-0.195160,0.604065,4.552307,-0.202438,1
  > GET_CLNA 1 1 
  0.654083,5.035858,-0.182587,0.604202,4.554291,-0.209702,0.604156,4.521027,-0.271149,1
  > GET_CLNA 1 2 
  0.654160,5.017700,-0.170517,0.604675,4.553680,-0.193069,0.604401,4.514008,-0.200500,1
  > CAN_CLOSE
  CAN closed
  ASTE FEMC:CLOSE
  ### Set Electro-magnet ###
  /cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 411.984000000
  v=12.800000, 13.400000, 10.400000, 19.100000
  ASTE FEMC:OPEN
  FEMC_TCP 8 
  
  Ver 0.91
  > 
  Program running.
  Do not turn off power to CAN nodes.
  ---------- 45 4C 01 08 00 E1nd at Node index 00
  AMBSI CAN Library V1.1.2
  AMBSI Firmware V1.0.1
  FEMC Firmware V2.5.0
  FPGA V2.1.0
  10 F2 B3 58 2 8 0 1B
  1 A4 9A 4F 14 0 0 19
  23 9B DE 4C 1 0 0 44
  0 0 0 0 0 0 0 0
  > ACT_DEMAG 0 1 30.00 1.00 100 
  OK
  > ACT_DEMAG 0 2 30.00 1.00 100 
  OK
  > ACT_DEMAG 1 1 30.00 1.00 100 
  OK
  > ACT_DEMAG 1 2 30.00 1.00 100 
  OK
  > SET_MAG_C 0 1 12.80 
  OK
  > SET_MAG_C 0 2 13.40 
  OK
  > SET_MAG_C 1 1 10.40 
  OK
  > SET_MAG_C 1 2 19.10 
  OK
  > GET_MAG_VC 0 1 
  0.169571,12.320328
  > GET_MAG_VC 0 2 
  0.171707,12.915039
  > GET_MAG_VC 1 1 
  0.136566,9.845352
  > GET_MAG_VC 1 2 
  0.262558,18.735504
  > CAN_CLOSE
  CAN closed
  ASTE FEMC:CLOSE
  ### Set SIS bias ###
  /cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 411.984000000
  411.984000 2.001608 2.049580 1.996820 1.957012
  ASTE FEMC:OPEN
  FEMC_TCP 8 
  
  Ver 0.91
  > 
  Program running.
  Do not turn off power to CAN nodes.
  ---------- 45 4C 01 08 00 E1nd at Node index 00
  AMBSI CAN Library V1.1.2
  AMBSI Firmware V1.0.1
  FEMC Firmware V2.5.0
  FPGA V2.1.0
  10 F2 B3 58 2 8 0 1B
  1 A4 9A 4F 14 0 0 19
  23 9B DE 4C 1 0 0 44
  0 0 0 0 0 0 0 0
  > SET_SIS_MODE 0 
  SET SIS MODE:CLOSE LOOP
  > SET_SIS_V 0 1 2.002 
  OK
  > SET_SIS_V 0 2 2.050 
  OK
  > SET_SIS_V 1 1 1.997 
  OK
  > SET_SIS_V 1 2 1.957 
  OK
  > GET_SIS_VC 0 1 
  1.908722,94.799805
  > GET_SIS_VC 0 2 
  1.959991,78.515625
  > GET_SIS_VC 1 1 
  1.915283,27.252197
  > GET_SIS_VC 1 2 
  1.855316,452.929687
  > CAN_CLOSE
  CAN closed
  ASTE FEMC:CLOSE
  ### Set LO Power ###
  /cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 411.984000000
  v=1.828200, -0.300000, 2.500000, -0.350000
  ASTE FEMC:OPEN
  FEMC_TCP 8 
  
  Ver 0.91
  > 
  Program running.
  Do not turn off power to CAN nodes.
  ---------- 45 4C 01 08 00 E1nd at Node index 00
  AMBSI CAN Library V1.1.2
  AMBSI Firmware V1.0.1
  FEMC Firmware V2.5.0
  FPGA V2.1.0
  10 F2 B3 58 2 8 0 1B
  1 A4 9A 4F 14 0 0 19
  23 9B DE 4C 1 0 0 44
  0 0 0 0 0 0 0 0
  > SET_PA_VD 0 1.83 
  OK
  > SET_PA_VG 0 -0.30 
  OK
  > SET_PA_VD 1 2.50 
  OK
  > SET_PA_VG 1 -0.35 
  OK
  > GET_PA 0 
  2.965851,247.695923,-0.290527
  > GET_PA 1 
  4.022827,258.911133,-0.345459
  > CAN_CLOSE
  CAN closed
  ASTE FEMC:CLOSE

  [asteobs@aste-1c ~]$ swbox_ctl_pol 1 0
  [asteobs@aste-1c ~]$ swbox_ctl_pol
  status: swbox_ctl_pol 1 0
  400:P1-LSB	402:P0-LSB

  [asteobs@aste-1c ~]$ cont_if 2 21
  changed Cont IF #2 att. = 21 [dB]
  Cont IF #2 Lev. = -0.000362 [V]
  [asteobs@aste-1c ~]$ cont_if 3 23
  changed Cont IF #3 att. = 0 [dB]
  Cont IF #3 Lev. = -0.000311 [V]

Pointing†

• UT 23:45 aste16/sbrf16/stx5b8.start

  az,el   = -83 74
  daz,del = 0.0 0.0 -> -3.0 -2.0
  dx,dy,dz,dtx,dty,dtz = all zeros
  Pk_val = ~28

Subref tilt offset measurements†

• UT 23:55 aste16/sbrf16/ststb8.list

  az, el   = -84 74
  daz,del = -3.0 -2.0
  dx,dy,dz,dtx,dty,dtz = all zeros

  2016/08/25 23:56:58
   Temp. :  -0.29 C   Humid. : 12.12 % (  0.72 hPa )   Solar :  0.00 kW/m2
   Wind  :   1.57 m/s  284 deg   AirPressure : 572.65 hPa    ( Rain:  0.01 )
   Opacity @220 GHz :   0.0500

  Current time = 2016/08/25 23:57:00
  Aspirin time = 2016/08/25 23:56:58
  Weather time = 2016/08/25 23:56:50
  Aspirin Offset : (Az, El) = (   3.20,  -5.26 )
  Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )

• UT00:09 ststb8b.start: scan 4-6 looks to be bad

• UT00:51

  az,el = -91 61

  2016/08/26 00:51:31
   Temp. :  -1.07 C   Humid. : 12.23 % (  0.69 hPa )   Solar :  0.00 kW/m2
   Wind  :   2.48 m/s  211 deg   AirPressure : 572.59 hPa    ( Rain:  0.01 )
   Opacity @220 GHz :   0.0314

  Current time = 2016/08/26 00:51:34
  Aspirin time = 2016/08/26 00:51:33
  Weather time = 2016/08/26 00:51:20
  Aspirin Offset : (Az, El) = (   5.48,  -3.27 )
  Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
  Refraction Corr. status : OK

• UT 01:37

  az,el = -94 50

  2016/08/26 01:37:47
   Temp. :  -2.71 C   Humid. : 15.29 % (  0.77 hPa )   Solar :  0.00 kW/m2
   Wind  :   2.22 m/s  207 deg   AirPressure : 572.61 hPa    ( Rain:  0.01 )
   Opacity @220 GHz :   0.0571

  Current time = 2016/08/26 01:37:50
  Aspirin time = 2016/08/26 01:37:48
  Weather time = 2016/08/26 01:37:37
  Aspirin Offset : (Az, El) = (   5.38,  -3.23 )
  Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
  Refraction Corr. status : OK

• UT 02:28 No detection of Saturn at the obs. table, ststb8a.start

  az,el = -98 39
  daz,del = +0.6 +2.5
  dx,dy,dz,dtx,dty,dtz = all 0.0s

  • There was an error in "yt". It should be 0.0 at ststb8a.start, but actually +1.0 as shown below.

                      x       y       z       xt      yt      zt
  Sub:  POS: REAL:   5.451  -1.390  -3.654  -0.000   1.000   0.001
             PROG:   5.584  -1.387  -3.699   0.000   0.000   0.000
             ERR:   -0.133  -0.003   0.045  -0.000   1.000   0.001
        CTL: Jack: PROG  Chop: PROG

  #ref(): File not found: "antenna_2016-08-26T02:32.png" at page "Observing Log/2016-08-26"

  • No error in the subref monitor

       1234           123456789abc           AZ EL
  PLS: oooo  SRV_AMP: oooooooooooo  PWR_AMP: o  o  CLK: o
  LIMIT: 0(0) 1(0) 2(0) 3(0) 4(0) 5(0) 6(0) 7(0) 8(0) 9(0)

  • I tried to set the sub-reflector MAN mode on the antenna GUI, but it persisted the PROG mode. The main-reflector could be set to MAN/STBY mode.
  • Here are some logs from pcvs

  02:01 ststb8g
  2016-08-26 02:03:01.700 aste-1c astpcvs DEB     Invalid value
  2016-08-26 02:03:01.700 aste-1c astpcvs DEB     ret=0
  2016-08-26 02:03:01.700 aste-1c astpcvs DEB     q_a 5.290349 -1.387259 -3.598960
  2016-08-26 02:03:01.700 aste-1c astpcvs DEB     q_a 0.000000 -0.017454 -0.000001
  2016-08-26 02:03:01.700 aste-1c astpcvs DEB     l_r 362.967500 365.647500 366.544500
  2016-08-26 02:03:01.700 aste-1c astpcvs DEB     l_r 367.186500 365.647500 362.317750
  2016-08-26 02:03:01.700 aste-1c astpcvs DEB     q_b 0.000000 0.000000 0.000000
  2016-08-26 02:03:01.700 aste-1c astpcvs DEB     q_b 0.000000 0.000000 0.000000
  2016-08-26 02:03:01.700 aste-1c astpcvs DEB     sh: /cosmos3/aste/sbin/sstop.sh: No such file or directory
  
  02:08 ststb8h
  02:15 ststb8i
  2016-08-26 02:17:01.400 aste-1c astpcvs DEB     Invalid value
  2016-08-26 02:17:01.400 aste-1c astpcvs DEB     ret=0
  2016-08-26 02:17:01.400 aste-1c astpcvs DEB     q_a 5.460234 -1.386922 -3.653487
  2016-08-26 02:17:01.400 aste-1c astpcvs DEB     q_a 0.000000 0.017454 -0.000001
  2016-08-26 02:17:01.400 aste-1c astpcvs DEB     l_r 366.398250 367.389250 361.519500
  2016-08-26 02:17:01.400 aste-1c astpcvs DEB     l_r 362.170250 367.389250 365.754750
  2016-08-26 02:17:01.400 aste-1c astpcvs DEB     q_b 5.460169 -1.386604 -3.653533
  2016-08-26 02:17:01.400 aste-1c astpcvs DEB     q_b 0.000001 0.017453 -0.000002
  2016-08-26 02:17:01.400 aste-1c astpcvs DEB     sh: /cosmos3/aste/sbin/sstop.sh: No such file or directory
  
  02:22 ststb8a.start
  2016-08-26 02:24:00.000 aste-1c astpcvs DEB     Invalid value
  2016-08-26 02:24:00.000 aste-1c astpcvs DEB     ret=0
  2016-08-26 02:24:00.000 aste-1c astpcvs DEB     q_a 5.415427 -1.388001 -3.654918
  2016-08-26 02:24:00.000 aste-1c astpcvs DEB     q_a 0.000000 0.017464 0.000012
  2016-08-26 02:24:00.000 aste-1c astpcvs DEB     l_r 366.405750 367.379000 361.524000
  2016-08-26 02:24:00.000 aste-1c astpcvs DEB     l_r 362.176250 367.378000 365.762750
  2016-08-26 02:24:00.000 aste-1c astpcvs DEB     q_b 0.000000 0.000000 0.000000
  2016-08-26 02:24:00.000 aste-1c astpcvs DEB     q_b 0.000000 0.000000 0.000000
  2016-08-26 02:24:00.001 aste-1c astpcvs DEB     sh: /cosmos3/aste/sbin/sstop.sh: No such file or directory

• UT 03:04 "asteobs@aste-mt1: cos3_cntl restart" did not resolve
• UT 03:05 "root@aste-1c: /cosmos3/aste/rc3.d/S98astpcvs restart" resolved this issue

  #ref(): File not found: "antenna_2016-08-26T03:09.png" at page "Observing Log/2016-08-26"

FMLO commissioning†

• Observations from ASTE site
  • Operators: ytamura, taniguchi
  • Contact: yoichi.tamura (skype)

• Plan
  • AI-5: Delay measurement
    • measure an offset between SG TRIG IN (FG 10 Hz trigger) and TRIG OUT.
    • adjust the offset to 0 usec.
    • take a long integration (~30 min)
• AI-5C: FMP optimization
  • Very quick and dirty sweeping of parameter space using IRAS16293 for device check etc.

Delay measurement (AI-5B)†

• 16:04 UTC - mWBp33.start with TRIG_DELAY = +130 us
  • aste16/fmlo16/mWBp33.start
  • OK, time offset between FG trigger (= SG TRIG IN) and SG TRIG OUT is now almost <10 usec!!
  • Saved oscilloscope captured data.

• 16:13 UTC - mWBp33.start with TRIG_DELAY = +130 us
  • aste16/fmlo16/mWBp33.start
  • We retry with oscilloscope at high time resolution.
  • Tsys = 198 K (A1) at EL = 46.
  • Time offset between SG TRIG IN and TRIG OUT is -2 to -3 usec. => missed to take data... will try again.

• 16:19 UTC - mWBp33.start with TRIG_DELAY = +130 us
  • aste16/fmlo16/mWBp33.start
  • We retry with oscilloscope at high time resolution.
  • Tsys = 180 K (A1) at EL = 45
  • Time offset between SG TRIG IN and TRIG OUT is -2 to -3 usec. => OK, we took data this time. will try a delay of +127 us.

• 16:30 UTC - mWBp33.start with TRIG_DELAY = +125 us
  • aste16/fmlo16/mWBp33.start
  • We try fine tuning of the time delay.
  • Trouble with ANTENNA_G ==> Restart cosmos ==> OK, recovered.

• 16:38 UTC - mWBp33.start with TRIG_DELAY = +125 us
  • aste16/fmlo16/mWBp33.start
  • We try fine tuning of the time delay.
  • Tsys = 190 K (A1) at EL = 41
  • Jiter looks large (~10 us?) ==> will try again

• 16:43 UTC - mWBp33.start with TRIG_DELAY = +125 us
  • aste16/fmlo16/mWBp33.start
  • Hmm, slightly different what we expected...

• 16:46 UTC - mWBp33.start with TRIG_DELAY = +128 us
  • aste16/fmlo16/mWBp33.start
  • Jitter looks large (~20 us p.-p.)...

• 16:46 UTC - mWBp33.start with TRIG_DELAY = +128 us
  • aste16/fmlo16/mWBp33.start
  • Jitter looks large (~20 us p.-p.)...

• 16:58 UTC - mWBp11.start with TRIG_DELAY = +130 us
  • aste16/fmlo16/mWBp11.start
  • We confirmed offset jitter with other table ==> OK, we fix +130 us.

Long integration for measurement of MAC dump timing offset†

• Conditions

• 17:07 UTC - long integration (30 min)
  • aste16/fmlo16/mWBp33l.start (l = エル = LONG) ==> failed...
  • ERR invalid operand, INTEG_TIE=1800

• 17:11 UTC - long integration (30 min)
  • Found COSMOS doesn't allow 1800 sec
  • Found COSMOS doesn't allow 1001 s but 1000 s.

• 17:24 UTC - long integration (1000s = 16m40s)
  • batch: /aste16/fmlo16/mWBlong.list (mWBp33l.start x 10 tables)
  • az,el = -91, 30
  • Tsys = 217 K (A1)
  • Condition:

                         ASTE Environment Monitor 2016/08/26 17:26:54
    
    ===================================ASTE Site===================================
      Temp. :   6.52 C   Humid. :  4.99 % (  0.48 hPa )   Solar :  0.92 kW/m2
      Wind  :   8.74 m/s  252 deg   AirPressure : 572.05 hPa    ( Rain:  0.01 )
      Opacity @220 GHz :   0.0552
    ================================ Receiver Cabin ===============================
      Main Cabin:  16.4 C  Upper Cabin:  12.5 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
      SCD :   ----      ----      ----      ----
    ================================Observation Room===============================
      Temp. :  19.41 degC   Humid. :  5.48 %
      Digital BE:   24.70 degC   29.80 degC   28.00 degC   25.50 degC 
      Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
    -------------------------------Air Conditioners--------------------------------
      Internal Out     19.89 C   14.50 C    0.90 C   20.80 C   -5.09 C   21.00 C
      Internal Ret.    21.10 C   19.50 C   19.89 C   19.50 C   20.10 C   20.30 C
      External        168.60 C    9.00 C   23.80 C  168.60 C
    ================================Antenna Shelter================================
      Air-cond. :    13.50 degC   13.10 degC   10.30 degC
      Room Temp.:    15.10 degC

FMP optimization (AI-5C)†

• ca. 18:10 UTC - pointing (mRFpnt)
  • ==> Oops, I forgot QL doesn't work. Quitting.

• ca. 19:00 UTC - psw test on IRAS 16293 for off point search
  • aste16/fmlo16/mIRpsw.start
  • OK, dRA, dDec = -30', 0' should work!

• 19:16 UTC - FMP optimization (batch)
  • aste16/fmlo16/mIRopt.list (including - psw, bw1, psw, bw2, psw, bw3, psw)
  • az,el = +103, 43
  • Tsys = 248 K (A1) during the first mIRpsw.start.
  • condition:

                        ASTE Environment Monitor 2016/08/26 19:17:50
    
    ===================================ASTE Site===================================
     Temp. :   5.24 C   Humid. :  7.80 % (  0.69 hPa )   Solar :  0.65 kW/m2
     Wind  :  10.01 m/s  245 deg   AirPressure : 571.52 hPa    ( Rain:  0.01 )
     Opacity @220 GHz :   0.0443
    ================================ Receiver Cabin ===============================
     Main Cabin:  17.0 C  Upper Cabin:  13.3 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
     SCD :   ----      ----      ----      ----
    ================================Observation Room===============================
     Temp. :  19.38 degC   Humid. :  5.98 %
     Digital BE:   25.00 degC   30.10 degC   28.40 degC   25.80 degC 
     Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
    -------------------------------Air Conditioners--------------------------------
     Internal Out     20.00 C   14.60 C    1.60 C   21.40 C    5.00 C   21.30 C
     Internal Ret.    21.40 C   19.39 C   20.20 C   19.80 C   19.30 C   20.60 C
     External        168.60 C    7.40 C   20.60 C  168.60 C
    ================================Antenna Shelter================================
     Air-cond. :    15.10 degC   15.30 degC    6.30 degC
     Room Temp.:    16.50 degC

• stop.
  • mIRbw1.start doesn't run. ==> I used a wrong scan table (for PSW), but this should be one for FMLO. Fixed.

• 19:36 UTC - FMP optimization (batch)
  • aste16/fmlo16/mIRopt.list (including - psw, bw1, psw, bw2, psw, bw3, psw)
  • az,el = +102, 48
  • Tsys = 253 K (A1), 353 K (A3) during the first mIRpsw.start.
  • condition:

                        ASTE Environment Monitor 2016/08/26 19:37:45
    
    ===================================ASTE Site===================================
     Temp. :   5.26 C   Humid. :  7.95 % (  0.71 hPa )   Solar :  0.57 kW/m2
     Wind  :  10.83 m/s  272 deg   AirPressure : 571.55 hPa    ( Rain:  0.01 )
     Opacity @220 GHz :   0.0781
    ================================ Receiver Cabin ===============================
     Main Cabin:  17.0 C  Upper Cabin:  13.5 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
     SCD :   ----      ----      ----      ----
    ================================Observation Room===============================
     Temp. :  20.14 degC   Humid. :  5.74 %
     Digital BE:   25.20 degC   30.20 degC   28.70 degC   26.20 degC 
     Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
    -------------------------------Air Conditioners--------------------------------
     Internal Out     20.10 C   11.20 C   17.60 C   21.20 C   12.50 C   21.20 C
     Internal Ret.    21.60 C   19.39 C   19.89 C   16.89 C   18.30 C   20.60 C
     External        168.60 C    8.00 C   14.70 C  168.60 C
    ================================Antenna Shelter================================
     Air-cond. :    15.00 degC   15.30 degC    5.60 degC
     Room Temp.:    16.39 degC

• 20:05 UTC - Finished observations
  • Bring a floppy disk of oscillo back from the telescope cabin.