2016-12-08(No. 3) - ASTE Observation Wiki

History
View the source.
Observing Log/2016-12-08 has been deleted.
- 1 (2016-12-08 (Thu) 09:07:28)
- 2 (2016-12-08 (Thu) 11:40:22)
- 3 (2016-12-08 (Thu) 14:55:55)

Observing Log

Feature testing (aka Comet tracking mode)
- Information
- Comet tracking mode

Feature testing (aka Comet tracking mode)†

↑

Information†

observer: Kamazaki, T.

↑

Comet tracking mode†

UT00:17 Tuning (aste16/ast0175/octp3.tune)

az,el = 49 60

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.796168800
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.796168800
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.204941,10.059204,-0.278152,0.003311,0.013428,4.909653,0.003586,0.022888,4.909607,1
> GET_CLNA 0 2 
1.204910,10.064240,-0.381210,0.003159,0.022125,-4.847870,0.004120,0.020447,4.909592,1
> GET_CLNA 1 1 
1.205933,10.041199,-0.795242,0.003159,0.022125,-4.881958,0.003204,0.022583,-4.881882,1
> GET_CLNA 1 2 
1.206619,10.094757,-0.301025,0.003708,0.018616,-4.881943,0.003403,0.012817,4.931458,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.796168800
351.796169 2.100000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.100 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.990738,52.655029
> GET_SIS_VC 0 2 
1.797104,40.560913
> GET_SIS_VC 1 1 
1.815720,54.776001
> GET_SIS_VC 1 2 
1.820679,47.668457
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.796168800
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.796168800
/cosmos3/naoj/bin/loatt_dash345 287 285
Set ATT     : Pol0=287, Pol1=285
 Pol0 =      287   , Pol1 =      285
 Pol0 = 0.007005[A], Pol1 = 0.006956[A]
 Pol0 = 0.663708[V], Pol1 = 0.765759[V]

[asteobs@aste-1c ~]$ mmc1_rstop
...
position 'R' verify ok.
seq_r end.
20161208t001938z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161208t001938z close_mmc(): socket '4' closed.
20161208t001938z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 12 dB      E/O att. = 12 dB    IF level=0.058325
new E/O att. = 12 dB    IF level=0.058509
new E/O att. = 14 dB    IF level=0.034377
new E/O att. = 16 dB    IF level=0.022849
new E/O att. = 14 dB    IF level=0.041118
14 dB  0.041118 V
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 13 dB    IF level=0.089380
new E/O att. = 13 dB    IF level=0.088539
new E/O att. = 14 dB    IF level=0.066686
new E/O att. = 15 dB    IF level=0.053444
new E/O att. = 16 dB    IF level=0.042293
new E/O att. = 15 dB    IF level=0.059352
15 dB  0.059352 V
[asteobs@aste-1c ~]$ mmc1_sstop
...
position 'SKY' verify ok.
seq_sky end.
20161208t001959z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161208t001959z close_mmc(): socket '4' closed.
20161208t001959z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
...
position 'R' verify ok.
20161208t002658z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161208t002658z close_mmc(): socket '8' closed.
20161208t002658z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 14 dB
 E/O IF level = 0.038510 V
Execute /cosmos3/naoj/bin/mmc1_sstop
...
position 'SKY' verify ok.
20161208t002704z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161208t002704z close_mmc(): socket '8' closed.
20161208t002704z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 14 dB
 E/O IF level = 0.022441 V
R=0.038510 V,  Sky=0.022441 V, Y=2.345313 dB
2.345313
[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
...
position 'R' verify ok.
20161208t002714z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161208t002714z close_mmc(): socket '8' closed.
20161208t002714z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.057325 V
Execute /cosmos3/naoj/bin/mmc1_sstop
...
position 'SKY' verify ok.
20161208t002719z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161208t002719z close_mmc(): socket '8' closed.
20161208t002719z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.031266 V
R=0.057325 V,  Sky=0.031266 V, Y=2.632717 dB
2.632717
[asteobs@aste-1c ~]$

UT00:30-01:13 aste16/ast0175/octp3.start

az,el = 44 63
daz,del = 0.0 0.0
Tsys A[1-4] = 325 432 393 400

2016/12/08 00:12:51
 Temp. :   0.27 C   Humid. : 36.67 % (  2.28 hPa )   Solar :  0.00 kW/m2
 Wind  :   6.32 m/s  265 deg   AirPressure : 571.00 hPa    ( Rain:  0.02 )
 Opacity @220 GHz :   0.1099

Current time = 2016/12/08 00:13:00
Aspirin time = 2016/12/08 00:12:58
Weather time = 2016/12/08 00:12:55
Aspirin Offset : (Az, El) = (  10.18,   4.43 )
Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
Refraction Corr. status : OK

UT01:25 aste16/ast0175/octr2.start
```
az,el = 12 69
daz,del = 0.0 0.0
Tsys A[1-4] = 233 337 317 309
```
- no plot in qlookl, but "Observation START : octr2 ocet1" in qlookl's messages
- obs table waited something at "WAIT MRG" or "WAIT QLSV" and did not finish

UT01:51 aste16/ast017t/octr4.start
```
no QL of octr2.start
az,el = -7 70
daz,del = 0.0 0.0
TSys A[1-4] = 221 330 311 299
```
- octr4.start successfully finished -> QL is not available in the comet tracking mode???

UT02:04 aste16/ast0175/octr3.start
```
SUNA - dSUNA
az,el = -17 69
daz,del = 0.0 0.0
Tsys A[1-4] = 214 319 304 291
```
- no plot in qlookl, but "Observation START : octr3 ocet1" in qlookl's messages
- octr3.start waited something at "WAIT QLSV" and did not finish

UT02:23 aste16/at0175/urar2.start

uranus from horizon
radec
az,el = -43 50
daz,del = 0.0 0.0
Tsys A[1-4] = 234 359 324 331

UT02:31 aste16/linux16/tOCC3r2
- mistake -> stopped by hand

UT02:34 aste16/linux16/OriK-rw
- just check qlook in OTF
- 12CO spectra in qlookl! -> so the no-plot issue is specific to OTF in the comet mode
- should ask FJ for the QL specifications in the mode

History of Observing Log/2016-12-08 (No. 3)

Feature testing (aka Comet tracking mode)†

Information†

Comet tracking mode†