Tuning at EL=60.0 deg (aste16/linux16/tEPC3ph.start)
2016/09/09 23:25:13
Temp. : 1.62 C Humid. : 5.45 % ( 0.37 hPa ) Solar : 0.00 kW/m2
Wind : 3.87 m/s 195 deg AirPressure : 573.77 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0630
Current time = 2016/09/09 23:25:21
Aspirin time = 2016/09/09 23:25:20
Weather time = 2016/09/09 23:25:14
Aspirin Offset : (Az, El) = ( 12.76, 0.87 )
Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on )
Refraction Corr. status : OK
[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.633622608
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.633622608
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00
OK
> GET_CLNA 0 1
1.204895,10.052185,-0.278030,0.003220,0.012665,4.909882,0.003586,0.022888,4.909790,1
> GET_CLNA 0 2
1.204971,10.052032,-0.381439,0.003189,0.023346,-4.847900,0.004105,0.022125,4.909805,1
> GET_CLNA 1 1
1.205856,10.051727,-0.795853,0.003174,0.021362,-4.881943,0.003204,0.024109,-4.881958,1
> GET_CLNA 1 2
1.206558,10.094910,-0.301758,0.003662,0.018921,-4.881973,0.003403,0.013123,4.931473,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.633622608
351.633623 1.900000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.900
OK
> SET_SIS_V 0 2 1.900
OK
> SET_SIS_V 1 1 1.900
OK
> SET_SIS_V 1 2 1.900
OK
> GET_SIS_VC 0 1
1.789017,43.161011
> GET_SIS_VC 0 2
1.790466,30.383301
> GET_SIS_VC 1 1
1.811600,46.865845
> GET_SIS_VC 1 2
1.819382,33.923340
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.633622608
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.633622608
/cosmos3/naoj/bin/loatt_dash345 291 285
Set ATT : Pol0=291, Pol1=285
Pol0 = 291 , Pol1 = 285
Pol0 = 0.007101[A], Pol1 = 0.006956[A]
Pol0 = 0.669497[V], Pol1 = 0.769017[V]
[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20160909t234155z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20160909t234155z open_mmc('mmc1:8501'): socket '4' connect success.
20160909t234155z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20160909t234155z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20160909t234156z mmc1 r reset_all.
mmc is active
20160909t234156z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20160909t234158z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20160909t234158z close_mmc(): socket '4' closed.
20160909t234158z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
14 dB 0.038169 V
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
16 dB 0.056037 V