- History
- View the source.
- Observing Log/2016-08-17 has been deleted.
Observing Log
CSV2016: Subref position offsets of DASH345 (2016-08-17)†
Tasks†
- Subref beam maps to estimate rough offsets in DASH345
Preparations†
- Basic checks
- Record which kisa files are used for DASH345 and BAND8
aste16@aste-ms1: ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
lrwxrwxrwx 1 astecntl astctl 12 Jun 3 2015 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.150603
lrwxrwxrwx 1 astecntl astctl 12 Jun 1 2015 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.150601
- Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
- Check Aspirin is working in the "WIND ON" mode
- Tuning at EL=60.0 deg
- Pointing toward Saturn
DASH345: stx5d3.start
- Z-axis adjustment using Saturn
DASH345: stsbd3z.start
Subref beam maps to estimate rough offsets of DASH345†
- Take a map of Saturn with (dx,dy)=(0,0),(-1,0),(+1,0),(0,-1),(0,+1)
- Set (dx,dy) in the subref offset GUI
- Pointing toward Saturn
DASH345: stx5d3.start
DASH345: str02d3.start
- Data reduction
Information†
Measurement Log†
Preparations†
- Basic checks
- Record which kisa files are used for DASH345 and BAND8
[aste16@aste-mx3 data]$ ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
Warning: Permanently added 'aste-1c,200.91.21.140' (RSA) to the list of known hosts.
lrwxrwxrwx 1 astecntl astctl 12 Jun 3 2015 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.150603
lrwxrwxrwx 1 astecntl astctl 12 Jun 1 2015 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.150601
- Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
- Check Aspirin is working in the "WIND ON" mode
- Tuning at EL=60.0 deg
===================================ASTE Site===================================
Temp. : -1.17 C Humid. : 8.63 % ( 0.48 hPa ) Solar : 0.00 kW/m2
Wind : 7.20 m/s 219 deg AirPressure : 572.39 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0031
================================ Receiver Cabin ===============================
Main Cabin: --- C Upper Cabin: --- C AzTEC AE: --- C Dewar: --- C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 22.90 degC Humid. : 3.00 %
Digital BE: 29.10 degC 31.90 degC 34.29 degC 32.10 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 25.10 C 21.50 C 22.50 C 23.90 C 23.70 C 28.10 C
Internal Ret. 26.50 C 23.60 C 22.90 C -2.40 C 23.70 C 27.10 C
External 168.60 C -1.80 C 1.90 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 6.60 degC 6.40 degC -2.10 degC
Room Temp.: 7.70 degC
[asteobs@aste-1c ~]$ swbox_ctl_be CONT
[asteobs@aste-1c ~]$ swbox_ctl_be
status: swbox_ctl_be CONT
[asteobs@aste-1c ~]$ asterx_sw DASH345
---
### After setting synthe ###
FREQ = 14.375000000 [GHz]
AMPL = 20.00 [dBm]
RF = ON
[asteobs@aste-1c ~]$ asterx_set DASH345
---
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 345.000000000
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 345.000000000
/cosmos3/naoj/bin/loatt_dash345 225 310
Set ATT : Pol0=225, Pol1=310
Pol0 = 225 , Pol1 = 310
Pol0 = 0.005489[A], Pol1 = 0.007566[A]
Pol0 = 0.655313[V], Pol1 = 0.773639[V]
[asteobs@aste-1c ~]$ swbox_ctl_pol 0 1
[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 0 1
400:P0-USB 402:P1-USB
[asteobs@aste-1c ~]$ cont_if 2 22
Cont IF #2 Att. = 24 [dB]
changed Cont IF #2 att. = 22 [dB]
recieved value = -1.28357000E-04
recieved value = -1.28357000E-04
Cont IF #2 Lev. = -0.000128 [V]
[asteobs@aste-1c ~]$ cont_if 3 17
Cont IF #3 Att. = 0 [dB]
changed Cont IF #3 att. = 0 [dB]
recieved value = -1.13845000E-04
recieved value = -1.13845000E-04
Cont IF #3 Lev. = -0.000114 [V]
- Pointing toward Saturn
dAz, dEl = 4.8, -4.8
- Z-axis adjusting using Saturn
Subref beam maps to estimate rough offset of DASH345†
- Take a map of Saturn with (dx,dy)=(0,0),(-1,0),(+1,0),(0,-1),(0,+1)
- UT01:40 qlookc was NOT updated
- It looked to be due to some connection failures between the ASTE site and Mitaka. After restarting /cosmos3/aste/rc3.d/S98astqlcsv on aste-mt1, this was resolved.
* aste-1c:/cosmos3/aste/syslog/astqlcsv/mess
2016-08-17 01:40:26.032 aste-1c astqlcsv DEB cmn_socket_write: Connection reset by peer (ret=-1, rest=8)
2016-08-17 01:40:26.032 aste-1c astqlcsv ERR [4] Failed in cmn_socket_write2
2016-08-17 01:40:26.032 aste-1c astqlcsv DEB [4] Connection accepted
2016-08-17 01:40:26.032 aste-1c astqlcsv DEB [4] ID=0 T=1 S=256
2016-08-17 01:40:26.032 aste-1c astqlcsv ERR [-1] Connection with REMOTE site not established
2016-08-17 01:40:26.032 aste-1c astqlcsv DEB [4] ID=0 T=5 total=159
2016-08-17 01:40:26.032 aste-1c astqlcsv DEB [4] ID=0 T=3 S=3220
2016-08-17 01:40:26.032 aste-1c astqlcsv DEB [5] Connection accepted
2016-08-17 01:40:26.032 aste-1c astqlcsv DEB [5] ID=0 T=1 S=256