2016-12-07(No. 2) - ASTE Observation Wiki

History
View the source.
Observing Log/2016-12-07 has been deleted.
- 1 (2016-12-07 (Wed) 09:33:27)
- 2 (2016-12-07 (Wed) 12:41:13)
- 3 (2016-12-07 (Wed) 15:15:07)
- 4 (2016-12-07 (Wed) 19:13:28)
- 5 (2016-12-07 (Wed) 20:37:12)
- 6 (2016-12-08 (Thu) 14:52:58)

Observing Log

Feature testing (aka COMET tracking mode)
- Information
- COMET tracking mode
A16016
- observer info
  - UTC0334 Pointing L2 Pup with 12CO(3-2)

Feature testing (aka COMET tracking mode)†

↑

Information†

Observer: Kamazaki,T.

↑

COMET tracking mode†

UT00:28 Tuning (aste16/ast0175/octp0.tune)

trk_03 error

12-07 00:28:08	ERR	132 195 RXT        ERR trk_03 Can't open!! file name=/cosmos3/aste/obstable/aste16/ast0175/obstable
12-07 00:28:08	ERR	130 190 ANTENNA_G  ERR Error at trk_00() (trk_03 Can't open!! file name=/cosmos3/aste/obstable/aste
12-07 00:28:08	ERR	Manager: Fatal ERROR. local:ANTENNA_G

a mistake in the ephemeris file name

UT00:34 Tuning (aste16/ast0175/octp0.tune)
- same error <- forgot to regenerate the obs table

UT00:37 Tuning (aste16/ast0175/octp0.tune)
- same error <- a mistake in the ephemeris file name again...

UT00:39 Tuning (aste16/ast0175/octp0.tune)
```
az,el = 42 60
yfactor = 2.6 3.2
```
- successfully finish

UT00:44 aste16/ast0175/octp0.start
```
az,el = 39 60
daz,del = 0.0 0.0
Tsys A[1-4] = 215 288 307 321
```
- no emission, probably due to velocities of O Cet and Earth

UT00:56 Tuning (aste16/ast0175/octp1.tune)
- just START TUNING to switch from MAC-HIGH to MAC-WIDE

UT00:57 aste16/ast0175/octp1.start
```
az,el = 31 67
daz,del = 0.0 0.0
Tsys A[1-4] = 172 342 327 306
```
- absorption lines at offset positions and no emission at the target position
- no antenna offset at offset positions?

UT01:19 aste16/ast0175/octr1.start
```
az,el = 18 69
daz,del = 0.0 0.0
Tsys A[1-4] = 160 319 302 277
```
- the table name in the qlookl is updated, but no quick look plot in all arrays.

UT01:35 aste16/ast0175/octp2.start

(RA,DEC) -> (AZ,EL) in oct_psw_3x3
az,el = 8 70
daz,del = 0.0 0.0

SCAN_COOD_OFF looks to be ok

SET TRK        TRK_TYPE         'COMET'
SET TRK        SRC_NAME         'ocet0'
SET TRK        EPOCH            'J2000'
SET TRK        SCAN_COOD        'RADEC'
SET ANTENNA_G  SCAN_COOD        'RRADEC'
SET ANTENNA_G  SCAN_COOD_OFF    'RAZEL'

but, no offset in the obs table
missed to put EL offset in an off position...

# OFF 1
SET ACG INTEG_TIME 10
EXECUTE SYN        OFFSET(-0.002778,-0.002778) TYPE(ON)
EXECUTE ANTENNA_G  OFFSET(+0.000000,+0.000000) TYPE(OFF)
WAIT_READY ANTENNA_G

UT01:57 aste16/ast0175/octp1.start

off = dRADEC(-000:05:00.0,000:00:00.0)
az,el = -9 70
daz,del = 0.0 0.0
Tsys A[1-4] = 158 309 300 271

12CO of O Cet was correctly detected

UT02:09 aste16/ast0175/octp2.start

off = dAZEL(-000:05:00.0,000:00:00.0)
az,el = -17 69
daz,del = 0.0 0.0
Tsys A[1-4] = 163 319 308 277

12CO of O Cet was correctly detected

UT02:28 aste16/ast0175/octr1.start

scan = RADEC
off = dRADEC
az,el = -29 67
daz,del = 0.0 0.0
Tsys A[1-4] = 160 311 307 265

no quick look is plotted

UT02:40 aste16/ast0175/octr2.start

scan = SUNA
off = dRADEC
az,el = -36 66
daz,del = 0.0 0.0
Tsys A[1-4] = 160 312 306 269

no quick look is plotted
UT02:48(?) AZ -> STBY, recovered just by setting PROG

2016/12/07 03:05:48
 Temp. :  -0.88 C   Humid. : 31.97 % (  1.83 hPa )   Solar :  0.00 kW/m2
 Wind  :   2.25 m/s  329 deg   AirPressure : 572.11 hPa    ( Rain:  0.01 )
 Opacity @220 GHz :   0.0926

Current time = 2016/12/07 03:06:08
Aspirin time = 2016/12/07 03:06:07
Weather time = 2016/12/07 03:05:56
Aspirin Offset : (Az, El) = (   4.18,  -7.95 )
Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
Refraction Corr. status : OK

↑

A16016†

↑

observer info†

izumi natsuko

↑

UTC0334 Pointing L2 Pup with 12CO(3-2)†

Filename: L2P-5p3

Weather

 ASTE Environment Monitor 2016/12/07 03:34:48 

===================================ASTE Site===================================
  Temp. :  -1.94 C   Humid. : 35.33 % (  1.87 hPa )   Solar :  0.00 kW/m2
  Wind  :   0.68 m/s  346 deg   AirPressure : 572.03 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0822
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.69 degC   Humid. : 10.05 %
  DBE(MAC):   18.0 degC  26.3 degC  23.7 degC  22.7 degC
  DBE(WHSF):  18.0 degC  19.0 degC  19.0 degC  21.0 degC  21.0 degC  20.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     16.50 C   13.00 C   17.50 C   18.39 C   10.19 C   18.30 C
  Internal Ret.    18.20 C   15.80 C   17.20 C    2.40 C   16.30 C   17.20 C
  External        168.60 C    0.10 C    0.00 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    21.60 degC   20.80 degC   -3.00 degC
  Room Temp.:    18.70 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.547028640
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.547028640
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7  

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.205002,10.068359,-0.278015,0.003235,0.013123,4.910172,0.003632,0.021973,4.910172,1
> GET_CLNA 0 2 
1.204819,10.058899,-0.381500,0.003220,0.023651,-4.848282,0.004105,0.021667,4.910172,1
> GET_CLNA 1 1 
1.205963,10.045166,-0.795471,0.003174,0.022430,-4.882004,0.003311,0.024872,-4.882065,1
> GET_CLNA 1 2 
1.206635,10.091553,-0.301102,0.003738,0.019073,-4.882019,0.003433,0.013123,4.931534,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.547028640
351.547029 2.100000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7  

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.100 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.986923,70.083618
> GET_SIS_VC 0 2 
1.786957,46.594238
> GET_SIS_VC 1 1 
1.810837,58.355713
> GET_SIS_VC 1 2 
1.815720,41.531372
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.547028640
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.547028640
/cosmos3/naoj/bin/loatt_dash345 293 286
Set ATT     : Pol0=293, Pol1=286
 Pol0 =      293   , Pol1 =      286
 Pol0 = 0.007150[A], Pol1 = 0.006980[A]
 Pol0 = 0.667760[V], Pol1 = 0.768196[V]

[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161207t033606z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161207t033606z open_mmc('mmc1:8501'): socket '4' connect success.
20161207t033606z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161207t033606z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161207t033606z mmc1 r reset_all.
mmc is active
20161207t033606z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161207t033608z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161207t033608z close_mmc(): socket '4' closed.
20161207t033608z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 16 dB      E/O att. = 16 dB    IF level=0.024737
new E/O att. = 16 dB    IF level=0.024832
new E/O att. = 14 dB    IF level=0.040136
new E/O att. = 16 dB    IF level=0.022342
16 dB  0.022342 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 15 dB    IF level=0.047493
new E/O att. = 15 dB    IF level=0.047543
new E/O att. = 14 dB    IF level=0.063021
new E/O att. = 15 dB    IF level=0.044730
15 dB  0.044730 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161207t033640z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161207t033640z open_mmc('mmc1:8501'): socket '4' connect success.
20161207t033640z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161207t033640z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161207t033640z mmc1 sky reset_all.
mmc is active
20161207t033640z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161207t033643z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161207t033643z close_mmc(): socket '4' closed.
20161207t033643z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161207t033651z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161207t033651z open_mmc('mmc1:8501'): socket '8' connect success.
20161207t033651z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161207t033651z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161207t033652z mmc1 r reset_all.
mmc is active
20161207t033652z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161207t033654z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161207t033654z close_mmc(): socket '8' closed.
20161207t033654z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 16 dB
 E/O IF level = 0.024715 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161207t033657z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161207t033657z open_mmc('mmc1:8501'): socket '8' connect success.
20161207t033657z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161207t033657z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161207t033657z mmc1 sky reset_all.
mmc is active
20161207t033657z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161207t033659z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161207t033659z close_mmc(): socket '8' closed.
20161207t033659z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 16 dB
 E/O IF level = 0.013662 V
R=0.024715 V,  Sky=0.013662 V, Y=2.574463 dB
2.574463

[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161207t033720z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161207t033720z open_mmc('mmc1:8501'): socket '8' connect success.
20161207t033720z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161207t033720z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161207t033720z mmc1 r reset_all.
mmc is active
20161207t033720z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161207t033722z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161207t033722z close_mmc(): socket '8' closed.
20161207t033722z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.047587 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161207t033726z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161207t033726z open_mmc('mmc1:8501'): socket '8' connect success.
20161207t033726z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161207t033726z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161207t033726z mmc1 sky reset_all.
mmc is active
20161207t033726z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161207t033728z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161207t033728z close_mmc(): socket '8' closed.
20161207t033728z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.025676 V
R=0.047587 V,  Sky=0.025676 V, Y=2.679610 dB
2.679610