2016-11-26(No. 2) - ASTE Observation Wiki

History
View the source.
Observing Log/2016-11-26 has been deleted.
- 1 (2016-11-26 (Sat) 12:38:28)
- 2 (2016-11-26 (Sat) 17:26:37)

Observing Log

DASH345 check
- observer info
CI demo observation
- observer info

DASH345 check†

↑

observer info†

izumi natsuko
skype: izumi.natsuko

↑

UTC0257 12CO Mac LSB check (345.796 GHz IF = 5.8 GHz A1, A2: P1 LSB, A3, A4: P0 LSB)†

Group/Project/Filename: aste16/test/COcopML

Weather

 ASTE Environment Monitor 2016/11/26 02:57:38

===================================ASTE Site===================================
  Temp. :  -1.77 C   Humid. : 18.44 % (  0.99 hPa )   Solar :  0.00 kW/m2
  Wind  :   6.11 m/s  291 deg   AirPressure : 571.88 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0569
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  16.43 degC   Humid. :  7.42 %
  DBE(MAC):   21.4 degC  28.6 degC  26.7 degC  24.2 degC
  DBE(WHSF):  21.0 degC  21.0 degC  22.0 degC  23.0 degC  23.0 degC  22.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     18.70 C  -11.00 C   17.70 C   19.20 C   -7.20 C   19.30 C
  Internal Ret.    20.90 C   16.70 C   17.60 C   15.40 C   17.50 C   18.80 C
  External        168.60 C    9.60 C    0.30 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    21.40 degC   24.60 degC   -3.50 degC
  Room Temp.:    17.50 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.512871912
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.512871912
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.204987,10.062256,-0.278931,0.003342,0.013428,4.910263,0.003586,0.023346,4.910187,1
> GET_CLNA 0 2 
1.204926,10.056458,-0.382874,0.003250,0.022736,-4.848389,0.004166,0.021973,4.910324,1
> GET_CLNA 1 1 
1.206009,10.026550,-0.796738,0.003189,0.021515,-4.882065,0.003220,0.024261,-4.882095,1
> GET_CLNA 1 2 
1.206665,10.088348,-0.302444,0.003647,0.018311,-4.881973,0.003433,0.013885,4.931595,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.512871912
351.512872 2.100000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.100 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.985016,144.763184
> GET_SIS_VC 0 2 
1.786423,107.867432
> GET_SIS_VC 1 1 
1.815262,62.139893
> GET_SIS_VC 1 2 
1.812592,45.614624
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.512871912
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.512871912
/cosmos3/naoj/bin/loatt_dash345 294 286
Set ATT     : Pol0=294, Pol1=286
 Pol0 =      294   , Pol1 =      286
 Pol0 = 0.007175[A], Pol1 = 0.006980[A]
 Pol0 = 0.671496[V], Pol1 = 0.770919[V]

[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t025840z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t025840z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t025840z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t025840z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161126t025840z mmc1 r reset_all.
mmc is active
20161126t025841z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161126t025843z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t025843z close_mmc(): socket '4' closed.
20161126t025843z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 12 dB      E/O att. = 12 dB    IF level=0.060299
new E/O att. = 12 dB    IF level=0.060246
new E/O att. = 14 dB    IF level=0.035445
new E/O att. = 16 dB    IF level=0.023593
new E/O att. = 14 dB    IF level=0.042138
14 dB  0.042138 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 14 dB    IF level=0.057511
new E/O att. = 14 dB    IF level=0.058496
new E/O att. = 15 dB    IF level=0.042825
new E/O att. = 14 dB    IF level=0.060826
new E/O att. = 15 dB    IF level=0.043300
15 dB  0.043300 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t025928z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t025928z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t025928z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t025928z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161126t025928z mmc1 sky reset_all.
mmc is active
20161126t025928z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161126t025930z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t025930z close_mmc(): socket '4' closed.
20161126t025930z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t025951z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t025951z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t025951z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t025951z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t025952z mmc1 r reset_all.
mmc is active
20161126t025952z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t025954z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t025954z close_mmc(): socket '8' closed.
20161126t025954z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 14 dB
 E/O IF level = 0.039014 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t025957z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t025957z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t025957z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t025957z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t025957z mmc1 sky reset_all.
mmc is active
20161126t025958z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t030000z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t030000z close_mmc(): socket '8' closed.
20161126t030000z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 14 dB
 E/O IF level = 0.018179 V
R=0.039014 V,  Sky=0.018179 V, Y=3.316505 dB
3.316505

[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t030009z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t030009z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t030009z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t030009z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t030010z mmc1 r reset_all.
mmc is active
20161126t030010z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t030012z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t030012z close_mmc(): socket '8' closed.
20161126t030012z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.045683 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t030015z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t030015z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t030015z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t030015z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t030015z mmc1 sky reset_all.
mmc is active
20161126t030015z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t030017z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t030017z close_mmc(): socket '8' closed.
20161126t030017z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.031191 V
R=0.045683 V,  Sky=0.031191 V, Y=1.657253 dB
1.657253

Observation

↑

UTC0308 12CO Mac LSB check (345.796 GHz IF = 5.8 GHz A1, A2: P0 LSB, A3, A4: P1 LSB)†

Group/Project/Filename: aste16/test/COcopMr

Weather

 ASTE Environment Monitor 2016/11/26 03:09:59

===================================ASTE Site===================================
  Temp. :  -1.77 C   Humid. : 16.68 % (  0.89 hPa )   Solar :  0.00 kW/m2
  Wind  :   2.70 m/s  303 deg   AirPressure : 571.82 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0499
================================ Receiver Cabin ===============================
  Main Cabin:  19.1 C  Upper Cabin:  11.1 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  16.26 degC   Humid. :  7.12 %
  DBE(MAC):   20.8 degC  26.5 degC  26.2 degC  24.0 degC
  DBE(WHSF):  21.0 degC  21.0 degC  22.0 degC  23.0 degC  23.0 degC  22.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     18.50 C    9.00 C   16.89 C   18.00 C   -4.50 C   18.70 C
  Internal Ret.    20.60 C   16.50 C   16.89 C    2.20 C   17.20 C   18.39 C
  External        168.60 C   -0.30 C   -0.30 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    22.00 degC   25.60 degC   -2.70 degC
  Room Temp.:    17.80 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.512843736
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.512843736
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.204987,10.059662,-0.278748,0.003220,0.013123,4.910339,0.003693,0.022736,4.910233,1
> GET_CLNA 0 2 
1.204926,10.056305,-0.382416,0.003281,0.022125,-4.848282,0.004150,0.020905,4.910172,1
> GET_CLNA 1 1 
1.206085,10.047913,-0.796738,0.003159,0.021667,-4.882126,0.003250,0.024261,-4.882080,1
> GET_CLNA 1 2 
1.206512,10.090179,-0.301849,0.003693,0.018311,-4.882034,0.003464,0.013428,4.931580,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.512843736
351.512844 2.100000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.100 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.982651,64.047241
> GET_SIS_VC 0 2 
1.787643,43.054199
> GET_SIS_VC 1 1 
1.811218,56.796265
> GET_SIS_VC 1 2 
1.809311,42.178345
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.512843736
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.512843736
/cosmos3/naoj/bin/loatt_dash345 294 286
Set ATT     : Pol0=294, Pol1=286
 Pol0 =      294   , Pol1 =      286
 Pol0 = 0.007175[A], Pol1 = 0.006980[A]
 Pol0 = 0.668708[V], Pol1 = 0.768762[V]

[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t031119z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t031119z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t031119z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t031119z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161126t031119z mmc1 r reset_all.
mmc is active
20161126t031119z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161126t031121z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t031121z close_mmc(): socket '4' closed.
20161126t031121z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 14 dB      E/O att. = 14 dB    IF level=0.038872
new E/O att. = 14 dB    IF level=0.039020
new E/O att. = 16 dB    IF level=0.023286
new E/O att. = 14 dB    IF level=0.041645
new E/O att. = 16 dB    IF level=0.023401
16 dB  0.023401 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 15 dB    IF level=0.046212
new E/O att. = 15 dB    IF level=0.046532
new E/O att. = 14 dB    IF level=0.061133
new E/O att. = 15 dB    IF level=0.043838
15 dB  0.043838 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t031143z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t031143z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t031143z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t031143z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161126t031144z mmc1 sky reset_all.
mmc is active
20161126t031144z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161126t031146z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t031146z close_mmc(): socket '4' closed.
20161126t031146z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t031206z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t031206z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t031206z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t031206z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t031207z mmc1 r reset_all.
mmc is active
20161126t031207z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t031209z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t031209z close_mmc(): socket '8' closed.
20161126t031209z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 16 dB
 E/O IF level = 0.025681 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t031212z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t031212z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t031212z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t031212z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t031212z mmc1 sky reset_all.
mmc is active
20161126t031212z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t031214z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t031214z close_mmc(): socket '8' closed.
20161126t031214z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 16 dB
 E/O IF level = 0.012272 V
R=0.025681 V,  Sky=0.012272 V, Y=3.206966 dB
3.206966

[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t031223z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t031223z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t031223z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t031223z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t031223z mmc1 r reset_all.
mmc is active
20161126t031223z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t031225z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t031225z close_mmc(): socket '8' closed.
20161126t031225z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.045961 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t031228z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t031228z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t031228z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t031228z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t031229z mmc1 sky reset_all.
mmc is active
20161126t031229z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t031231z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t031231z close_mmc(): socket '8' closed.
20161126t031231z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.031657 V
R=0.045961 V,  Sky=0.031657 V, Y=1.619197 dB
1.619197

↑

UTC0319 12CO Mac LSB check (345.796 GHz IF = 6.0 GHz A1, A2: P1 LSB, A3, A4: P0 LSB)†

Group/Project/Filename: aste16/test/COcopM6

Weather

 ASTE Environment Monitor 2016/11/26 03:19:12

===================================ASTE Site===================================
  Temp. :  -3.68 C   Humid. : 31.99 % (  1.49 hPa )   Solar :  0.00 kW/m2
  Wind  :   3.68 m/s  197 deg   AirPressure : 571.82 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0595
================================ Receiver Cabin ===============================
  Main Cabin:  19.1 C  Upper Cabin:  11.0 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  16.20 degC   Humid. :  7.04 %
  DBE(MAC):   19.9 degC  23.8 degC  25.1 degC  23.7 degC
  DBE(WHSF):  21.0 degC  21.0 degC  21.0 degC  23.0 degC  22.0 degC  22.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     18.30 C   -9.80 C   17.80 C   18.70 C   -9.00 C   18.89 C
  Internal Ret.    20.30 C   16.70 C   17.80 C   17.89 C   17.20 C   18.39 C
  External        168.60 C    6.10 C   -2.80 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.30 degC   19.20 degC   -4.20 degC
  Room Temp.:    17.00 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.712818960
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.712818960
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.205048,10.065613,-0.279236,0.003296,0.013428,4.910278,0.003647,0.022736,4.910278,1
> GET_CLNA 0 2 
1.205078,10.055847,-0.383057,0.003281,0.022278,-4.848373,0.004105,0.022125,4.910202,1
> GET_CLNA 1 1 
1.205933,10.035858,-0.796829,0.003189,0.022125,-4.882111,0.003235,0.025177,-4.882050,1
> GET_CLNA 1 2 
1.206665,10.099640,-0.302231,0.003769,0.019073,-4.882065,0.003372,0.013733,4.931595,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.712818960
351.712819 2.100000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.100 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.983490,44.937134
> GET_SIS_VC 0 2 
1.786423,34.072876
> GET_SIS_VC 1 1 
1.804047,38.867187
> GET_SIS_VC 1 2 
1.819305,32.077026
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.712818960
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.712818960
/cosmos3/naoj/bin/loatt_dash345 289 285
Set ATT     : Pol0=289, Pol1=285
 Pol0 =      289   , Pol1 =      285
 Pol0 = 0.007053[A], Pol1 = 0.006956[A]
 Pol0 = 0.666710[V], Pol1 = 0.767884[V]

[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t032024z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t032024z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t032024z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t032024z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161126t032024z mmc1 r reset_all.
mmc is active
20161126t032024z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161126t032027z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t032027z close_mmc(): socket '4' closed.
20161126t032027z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 16 dB      E/O att. = 16 dB    IF level=0.021943
new E/O att. = 16 dB    IF level=0.021966
new E/O att. = 14 dB    IF level=0.035214
new E/O att. = 16 dB    IF level=0.019852
new E/O att. = 14 dB    IF level=0.035212
14 dB  0.035212 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 15 dB    IF level=0.050942
new E/O att. = 15 dB    IF level=0.050899
new E/O att. = 16 dB    IF level=0.037886
new E/O att. = 15 dB    IF level=0.053526
15 dB  0.053526 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t032113z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t032113z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t032113z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t032113z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161126t032113z mmc1 sky reset_all.
mmc is active
20161126t032114z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161126t032116z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t032116z close_mmc(): socket '4' closed.
20161126t032116z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t032126z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t032126z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t032126z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t032126z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t032126z mmc1 r reset_all.
mmc is active
20161126t032126z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t032128z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t032128z close_mmc(): socket '8' closed.
20161126t032128z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 14 dB
 E/O IF level = 0.033145 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t032131z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t032131z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t032131z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t032131z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t032132z mmc1 sky reset_all.
mmc is active
20161126t032132z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t032134z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t032134z close_mmc(): socket '8' closed.
20161126t032134z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 14 dB
 E/O IF level = 0.015723 V
R=0.033145 V,  Sky=0.015723 V, Y=3.238826 dB
3.238826

[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t032141z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t032141z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t032141z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t032141z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t032141z mmc1 r reset_all.
mmc is active
20161126t032141z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t032143z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t032143z close_mmc(): socket '8' closed.
20161126t032143z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.051059 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t032146z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t032146z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t032146z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t032146z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t032147z mmc1 sky reset_all.
mmc is active
20161126t032147z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t032149z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t032149z close_mmc(): socket '8' closed.
20161126t032149z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.020985 V
R=0.051059 V,  Sky=0.020985 V, Y=3.861633 dB
3.861633

↑

CI demo observation†

↑

observer info†

izumi natsuko
skype: izumi.natsuko

↑

UTC0350 Pointing O Cet with 12CO(4-3)†

Filename: OCTp5B8

Weather

ASTE Environment Monitor 2016/11/26 03:50:00

===================================ASTE Site===================================
  Temp. :  -3.26 C   Humid. : 31.26 % (  1.50 hPa )   Solar :  0.00 kW/m2
  Wind  :   2.96 m/s  211 deg   AirPressure : 571.83 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0649
================================ Receiver Cabin ===============================
  Main Cabin:  19.4 C  Upper Cabin:  10.7 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.94 degC   Humid. :  7.33 %
  DBE(MAC):   18.7 degC  21.5 degC  23.2 degC  22.6 degC
  DBE(WHSF):  20.0 degC  20.0 degC  20.0 degC  22.0 degC  22.0 degC  21.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.60 C   16.30 C   16.10 C   17.10 C   11.80 C   17.60 C
  Internal Ret.    19.20 C   16.20 C   16.20 C   -5.60 C   16.39 C   17.10 C
  External        168.60 C   -2.10 C   -2.80 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.00 degC   18.80 degC   -2.90 degC
  Room Temp.:    16.50 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 454.929780672
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 454.929780672
vd0=0.650000, id0=5.000000
vd1=0.600000, id1=4.500000
vd2=0.600000, id2=4.500000
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> GET_CLNA 0 1 
0.654617,5.025787,-0.175385,0.604034,4.533539,-0.198105,0.604675,4.550323,-0.204666,1
> GET_CLNA 0 2 
0.653854,5.038910,-0.195618,0.604385,4.558411,-0.196533,0.604065,4.553375,-0.203430,1
> GET_CLNA 1 1 
0.654190,5.033569,-0.183075,0.604218,4.547424,-0.209930,0.604263,4.525146,-0.271835,1
> GET_CLNA 1 2 
0.654266,5.017090,-0.170975,0.604752,4.554291,-0.193756,0.604477,4.514618,-0.200958,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set Electro-magnet ###
/cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 454.929780672
v=16.500000, 17.000000, 10.400000, 19.100000
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> ACT_DEMAG 0 1 30.00 1.00 100 
OK
> ACT_DEMAG 0 2 30.00 1.00 100 
OK
> ACT_DEMAG 1 1 30.00 1.00 100 
OK
> ACT_DEMAG 1 2 30.00 1.00 100 
OK
> SET_MAG_C 0 1 16.50 
OK
> SET_MAG_C 0 2 17.00 
OK
> SET_MAG_C 1 1 10.40 
OK
> SET_MAG_C 1 2 19.10 
OK
> GET_MAG_VC 0 1 
0.220993,16.055298
> GET_MAG_VC 0 2 
0.218048,16.552734
> GET_MAG_VC 1 1 
0.135864,9.846878
> GET_MAG_VC 1 2 
0.264023,18.733978
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 454.929780672
454.929781 1.749000 1.749000 1.552000 1.700000
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.749 
OK
> SET_SIS_V 0 2 1.749 
OK
> SET_SIS_V 1 1 1.552 
OK
> SET_SIS_V 1 2 1.700 
OK
> GET_SIS_VC 0 1 
1.670074,84.320068
> GET_SIS_VC 0 2 
1.663055,78.564453
> GET_SIS_VC 1 1 
1.475830,75.329590
> GET_SIS_VC 1 2 
1.624374,887.365723
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 454.929780672
v=1.380000, -0.300000, 2.500000, -0.350000
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_PA_VD 0 1.38 
OK
> SET_PA_VG 0 -0.30 
OK
> SET_PA_VD 1 2.50 
OK
> SET_PA_VG 1 -0.35 
OK
> GET_PA 0 
2.234497,217.254639,-0.290985
> GET_PA 1 
4.022064,239.929199,-0.345917
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t035244z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t035244z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t035244z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t035244z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161126t035244z mmc1 r reset_all.
mmc is active
20161126t035244z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161126t035246z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t035246z close_mmc(): socket '4' closed.
20161126t035246z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 14 dB      E/O att. = 14 dB    IF level=0.020714
new E/O att. = 14 dB    IF level=0.020793
new E/O att. = 12 dB    IF level=0.033433
new E/O att. = 14 dB    IF level=0.018905
new E/O att. = 12 dB    IF level=0.033175
12 dB  0.033175 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 15 dB    IF level=0.040500
new E/O att. = 15 dB    IF level=0.041080
new E/O att. = 14 dB    IF level=0.052276
new E/O att. = 15 dB    IF level=0.038757
new E/O att. = 14 dB    IF level=0.054390
14 dB  0.054390 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t035328z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t035328z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t035328z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t035328z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161126t035329z mmc1 sky reset_all.
mmc is active
20161126t035329z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161126t035331z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t035331z close_mmc(): socket '4' closed.
20161126t035331z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t035354z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t035354z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t035354z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t035354z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t035354z mmc1 r reset_all.
mmc is active
20161126t035354z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t035356z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t035356z close_mmc(): socket '8' closed.
20161126t035356z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 12 dB
 E/O IF level = 0.031159 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t035359z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t035359z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t035359z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t035359z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t035400z mmc1 sky reset_all.
mmc is active
20161126t035400z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t035402z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t035402z close_mmc(): socket '8' closed.
20161126t035402z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 12 dB
 E/O IF level = 0.025372 V
R=0.031159 V,  Sky=0.025372 V, Y=0.892288 dB
0.892288

[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t035413z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t035413z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t035413z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t035413z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t035413z mmc1 r reset_all.
mmc is active
20161126t035413z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t035416z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t035416z close_mmc(): socket '8' closed.
20161126t035416z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 14 dB
 E/O IF level = 0.051957 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t035419z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t035419z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t035419z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t035419z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t035419z mmc1 sky reset_all.
mmc is active
20161126t035419z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t035421z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t035421z close_mmc(): socket '8' closed.
20161126t035421z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 14 dB
 E/O IF level = 0.038322 V
R=0.051957 V,  Sky=0.038322 V, Y=1.321959 dB
1.321959

Pointing
- ddAz, ddEl = -3.7, -4.0

↑

UTC0418 Calbration source RCW38 core 1 with CI†

Filename: R3cpCI1

Weather

 ASTE Environment Monitor 2016/11/26 04:19:02

===================================ASTE Site===================================
  Temp. :  -3.65 C   Humid. : 17.97 % (  0.84 hPa )   Solar :  0.00 kW/m2
  Wind  :   4.61 m/s  296 deg   AirPressure : 571.38 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0400
================================ Receiver Cabin ===============================
  Main Cabin:  19.5 C  Upper Cabin:  10.2 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.78 degC   Humid. :  6.98 %
  DBE(MAC):   20.3 degC  27.1 degC  25.1 degC  23.1 degC
  DBE(WHSF):  20.0 degC  20.0 degC  21.0 degC  22.0 degC  22.0 degC  21.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.60 C   16.39 C   16.39 C   17.89 C   14.80 C   17.89 C
  Internal Ret.    19.70 C   16.39 C   16.39 C   -5.09 C   16.70 C   17.50 C
  External        168.60 C   -3.40 C   -3.20 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.10 degC   18.70 degC   -4.00 degC
  Room Temp.:    16.20 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 486.154666008
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 486.154666008
vd0=0.650000, id0=5.000000
vd1=0.600000, id1=4.500000
vd2=0.600000, id2=4.500000
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> GET_CLNA 0 1 
0.654602,5.026398,-0.175339,0.604004,4.533691,-0.198044,0.604691,4.552765,-0.204712,1
> GET_CLNA 0 2 
0.653778,5.037537,-0.195312,0.604340,4.558563,-0.196320,0.604019,4.553528,-0.203354,1
> GET_CLNA 1 1 
0.654160,5.037537,-0.183167,0.604202,4.548950,-0.209915,0.604279,4.521637,-0.271835,1
> GET_CLNA 1 2 
0.654236,5.014801,-0.170883,0.604721,4.552612,-0.193527,0.604340,4.514160,-0.200806,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set Electro-magnet ###
/cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 486.154666008
v=17.500000, 21.500000, 13.800000, 19.100000
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> ACT_DEMAG 0 1 30.00 1.00 100 
OK
> ACT_DEMAG 0 2 30.00 1.00 100 
OK
> ACT_DEMAG 1 1 30.00 1.00 100 
OK
> ACT_DEMAG 1 2 30.00 1.00 100 
OK
> SET_MAG_C 0 1 17.50 
OK
> SET_MAG_C 0 2 21.50 
OK
> SET_MAG_C 1 1 13.80 
OK
> SET_MAG_C 1 2 19.10 
OK
> GET_MAG_VC 0 1 
0.235764,17.037964
> GET_MAG_VC 0 2 
0.277313,21.043777
> GET_MAG_VC 1 1 
0.183411,13.237762
> GET_MAG_VC 1 2 
0.262009,18.733978
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 486.154666008
486.154666 1.889829 1.851712 1.896000 1.849000
ASTE FEMC:OPEN
FEMC_TCP 8    

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.890 
OK
> SET_SIS_V 0 2 1.852 
OK
> SET_SIS_V 1 1 1.896 
OK
> SET_SIS_V 1 2 1.849 
OK
> GET_SIS_VC 0 1 
1.786957,73.135376
> GET_SIS_VC 0 2 
1.762390,86.462402
> GET_SIS_VC 1 1 
1.812439,81.829834
> GET_SIS_VC 1 2 
1.845169,977.108765
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 486.154666008
v=1.458400, -0.300000, 2.407520, -0.350000
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_PA_VD 0 1.46 
OK
> SET_PA_VG 0 -0.30 
OK
> SET_PA_VD 1 2.41 
OK
> SET_PA_VG 1 -0.35 
OK
> GET_PA 0 
2.360687,207.839966,-0.291138
> GET_PA 1 
3.865967,231.750488,-0.345764
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE

[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t042108z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t042108z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t042108z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t042108z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161126t042109z mmc1 r reset_all.
mmc is active
20161126t042109z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161126t042111z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t042111z close_mmc(): socket '4' closed.
20161126t042111z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 12 dB      E/O att. = 12 dB    IF level=0.020595
new E/O att. = 12 dB    IF level=0.020910
new E/O att. = 10 dB    IF level=0.033121
new E/O att. = 12 dB    IF level=0.018631
new E/O att. = 10 dB    IF level=0.033218
10 dB  0.033218 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 14 dB    IF level=0.032346
new E/O att. = 14 dB    IF level=0.031834
new E/O att. = 13 dB    IF level=0.042404
new E/O att. = 12 dB    IF level=0.053345
new E/O att. = 13 dB    IF level=0.037537
new E/O att. = 12 dB    IF level=0.053665
12 dB  0.053665 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t042148z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t042148z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t042148z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t042148z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161126t042148z mmc1 sky reset_all.
mmc is active
20161126t042148z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161126t042150z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t042150z close_mmc(): socket '4' closed.
20161126t042150z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t042246z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t042246z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t042246z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t042246z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t042247z mmc1 r reset_all.
mmc is active
20161126t042247z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t042249z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t042249z close_mmc(): socket '8' closed.
20161126t042249z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 10 dB
 E/O IF level = 0.031453 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t042252z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t042252z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t042252z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t042252z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t042252z mmc1 sky reset_all.
mmc is active
20161126t042252z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t042255z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t042255z close_mmc(): socket '8' closed.
20161126t042255z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 10 dB
 E/O IF level = 0.027553 V
R=0.031453 V,  Sky=0.027553 V, Y=0.574932 dB
0.574932

[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t042303z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t042303z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t042303z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t042303z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t042303z mmc1 r reset_all.
mmc is active
20161126t042303z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t042305z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t042305z close_mmc(): socket '8' closed.
20161126t042305z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 12 dB
 E/O IF level = 0.050386 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t042308z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t042308z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t042308z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t042308z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t042309z mmc1 sky reset_all.
mmc is active
20161126t042309z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t042311z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t042311z close_mmc(): socket '8' closed.
20161126t042311z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 12 dB
 E/O IF level = 0.046142 V
R=0.050386 V,  Sky=0.046142 V, Y=0.382135 dB
0.382135

Observation
- Detect CI emission from RCW38 core I

↑

UTC0430 OTF mapping RCW38 Xscan†

Filename:R38otfX

Weather

 ASTE Environment Monitor 2016/11/26 04:30:56

===================================ASTE Site===================================
  Temp. :  -3.32 C   Humid. : 20.22 % (  0.97 hPa )   Solar :  0.00 kW/m2
  Wind  :   3.13 m/s  222 deg   AirPressure : 571.36 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0718
================================ Receiver Cabin ===============================
  Main Cabin:  17.3 C  Upper Cabin:  10.2 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.76 degC   Humid. :  6.73 %
  DBE(MAC):   20.6 degC  27.7 degC  25.7 degC  23.4 degC
  DBE(WHSF):  20.0 degC  20.0 degC  21.0 degC  22.0 degC  22.0 degC  21.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.70 C  -12.10 C   16.10 C   17.70 C    7.00 C   18.39 C
  Internal Ret.    19.80 C   15.90 C   16.30 C   -5.09 C   16.50 C   17.60 C
  External        168.60 C    4.70 C   -3.40 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.30 degC   19.20 degC   -3.50 degC
  Room Temp.:    17.20 degC

↑

UTC0524 OTF mapping RCW38 Yscan†

Filename:R38otfY

Weather

ASTE Environment Monitor 2016/11/26 05:25:37

===================================ASTE Site===================================
  Temp. :  -5.13 C   Humid. : 21.68 % (  0.90 hPa )   Solar :  0.00 kW/m2
  Wind  :   2.16 m/s  226 deg   AirPressure : 571.08 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0484
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.63 degC   Humid. :  6.90 %
  DBE(MAC):   20.7 degC  28.1 degC  25.9 degC  23.6 degC
  DBE(WHSF):  20.0 degC  21.0 degC  21.0 degC  22.0 degC  22.0 degC  21.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.70 C   16.60 C   17.50 C   18.60 C   -9.19 C   18.20 C
  Internal Ret.    20.00 C   16.50 C   17.39 C   -0.20 C   16.80 C   17.70 C
  External        168.60 C   -1.70 C   -3.40 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.80 degC   19.50 degC   -5.09 degC
  Room Temp.:    17.39 degC

↑

UTC0603 Lost Priority (during 48/61 scan)†

↑

UTC0605 Restart OTF mapping from 46/61 scan†

↑

UTC0619 Pointing RAFGL5254 with CO(4-3)†

Filename:R52p5B8

Weather

 ASTE Environment Monitor 2016/11/26 06:19:36

===================================ASTE Site===================================
  Temp. :  -6.61 C   Humid. : 26.54 % (  0.99 hPa )   Solar :  0.00 kW/m2
  Wind  :   1.18 m/s  186 deg   AirPressure : 570.67 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0351
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.56 degC   Humid. :  6.41 %
  DBE(MAC):   20.5 degC  27.8 degC  25.9 degC  23.4 degC
  DBE(WHSF):  20.0 degC  20.0 degC  21.0 degC  22.0 degC  22.0 degC  21.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.50 C   16.00 C   17.20 C   18.50 C   -7.70 C   18.30 C
  Internal Ret.    19.89 C   16.20 C   17.10 C   16.50 C   16.60 C   17.60 C
  External        168.60 C   -1.50 C   -6.00 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    21.00 degC   20.00 degC   -6.70 degC
  Room Temp.:    17.10 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 455.054553000
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 455.054553000
vd0=0.650000, id0=5.000000
vd1=0.600000, id1=4.500000
vd2=0.600000, id2=4.500000
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> GET_CLNA 0 1 
0.654587,5.027161,-0.175507,0.604034,4.532928,-0.198166,0.604630,4.550934,-0.204849,1
> GET_CLNA 0 2 
0.653793,5.040894,-0.195602,0.604416,4.556885,-0.196548,0.604095,4.551086,-0.203476,1
> GET_CLNA 1 1 
0.654129,5.038147,-0.183105,0.604218,4.550171,-0.210037,0.604294,4.521942,-0.271881,1
> GET_CLNA 1 2 
0.654373,5.018463,-0.171234,0.604782,4.551239,-0.193970,0.604416,4.512939,-0.201080,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set Electro-magnet ###
/cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 455.054553000
v=16.500000, 17.000000, 10.585480, 19.100000
ASTE FEMC:OPEN
FEMC_TCP 8  

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> ACT_DEMAG 0 1 30.00 1.00 100 
OK
> ACT_DEMAG 0 2 30.00 1.00 100 
OK
> ACT_DEMAG 1 1 30.00 1.00 100 
OK
> ACT_DEMAG 1 2 30.00 1.00 100 
OK
> SET_MAG_C 0 1 16.50 
OK
> SET_MAG_C 0 2 17.00 
OK
> SET_MAG_C 1 1 10.59 
OK
> SET_MAG_C 1 2 19.10 
OK
> GET_MAG_VC 0 1 
0.221451,16.051102
> GET_MAG_VC 0 2 
0.218918,16.550446
> GET_MAG_VC 1 1 
0.138794,10.028458
> GET_MAG_VC 1 2 
0.261642,18.729019
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 455.054553000
455.054553 1.749000 1.749000 1.549218 1.689308
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.749 
OK
> SET_SIS_V 0 2 1.749 
OK
> SET_SIS_V 1 1 1.549 
OK
> SET_SIS_V 1 2 1.689 
OK
> GET_SIS_VC 0 1 
1.704178,137.136841
> GET_SIS_VC 0 2 
1.660004,84.579468
> GET_SIS_VC 1 1 
1.471481,75.357056
> GET_SIS_VC 1 2 
1.614075,900.039673
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 455.054553000
v=1.380000, -0.300000, 2.499454, -0.350000
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_PA_VD 0 1.38 
OK
> SET_PA_VG 0 -0.30 
OK
> SET_PA_VD 1 2.50 
OK
> SET_PA_VG 1 -0.35 
OK
> GET_PA 0 
2.234497,217.163086,-0.291138
> GET_PA 1 
4.022217,240.234375,-0.345612
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE

[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t062213z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t062213z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t062213z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t062213z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161126t062213z mmc1 r reset_all.
mmc is active
20161126t062213z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161126t062215z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t062215z close_mmc(): socket '4' closed.
20161126t062215z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 10 dB      E/O att. = 10 dB    IF level=0.042940
new E/O att. = 10 dB    IF level=0.041504
new E/O att. = 12 dB    IF level=0.024670
new E/O att. = 10 dB    IF level=0.045791
new E/O att. = 12 dB    IF level=0.024803
12 dB  0.024803 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 12 dB    IF level=0.082283
new E/O att. = 12 dB    IF level=0.082368
new E/O att. = 13 dB    IF level=0.061196
new E/O att. = 14 dB    IF level=0.049111
new E/O att. = 13 dB    IF level=0.068276
new E/O att. = 14 dB    IF level=0.048592
14 dB  0.048592 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t062252z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t062252z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t062252z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t062252z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161126t062253z mmc1 sky reset_all.
mmc is active
20161126t062253z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161126t062255z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t062255z close_mmc(): socket '4' closed.
20161126t062255z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t062302z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t062302z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t062302z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t062302z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t062303z mmc1 r reset_all.
mmc is active
20161126t062303z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t062305z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t062305z close_mmc(): socket '8' closed.
20161126t062305z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 12 dB
 E/O IF level = 0.027964 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t062308z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t062308z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t062308z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t062308z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t062308z mmc1 sky reset_all.
mmc is active
20161126t062308z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t062311z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t062311z close_mmc(): socket '8' closed.
20161126t062311z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 12 dB
 E/O IF level = 0.021141 V
R=0.027964 V,  Sky=0.021141 V, Y=1.214738 dB
1.214738

[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t062320z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t062320z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t062320z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t062320z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t062320z mmc1 r reset_all.
mmc is active
20161126t062320z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t062322z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t062322z close_mmc(): socket '8' closed.
20161126t062322z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 14 dB
 E/O IF level = 0.051595 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t062325z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t062325z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t062325z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t062325z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t062326z mmc1 sky reset_all.
mmc is active
20161126t062326z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t062328z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t062328z close_mmc(): socket '8' closed.
20161126t062328z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 14 dB
 E/O IF level = 0.037536 V
R=0.051595 V,  Sky=0.037536 V, Y=1.381596 dB
1.381596

Pointing
- Bad baseline...

↑

UTC0630 Change Pointing source to IRC+10216†

Filename:IRCp5B8
Pointing
- ddAz, ddEl = 0.5, 0.0

↑

UTC0646 Calibration source IRC+10216 with 12CO(4-3)†

Filename:IRCcpCO

Weather

ASTE Environment Monitor 2016/11/26 06:47:40

===================================ASTE Site===================================
  Temp. :  -5.73 C   Humid. : 30.61 % (  1.22 hPa )   Solar :  0.00 kW/m2
  Wind  :   0.60 m/s  127 deg   AirPressure : 570.49 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0481
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.75 degC   Humid. :  6.39 %
  DBE(MAC):   20.6 degC  28.1 degC  25.9 degC  23.6 degC
  DBE(WHSF):  20.0 degC  20.0 degC  21.0 degC  22.0 degC  22.0 degC  21.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.39 C   16.89 C   17.60 C   18.70 C   -8.10 C   18.00 C
  Internal Ret.    19.89 C   16.50 C   17.39 C   17.00 C   16.70 C   17.10 C
  External        168.60 C   -3.80 C   -4.80 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.70 degC   19.60 degC   -7.10 degC
  Room Temp.:    17.39 degC

↑

UTC0650 Calibration source RCW38 core 1 with CI†

Filename:R3cpCI1

Weather

 ASTE Environment Monitor 2016/11/26 06:50:34

===================================ASTE Site===================================
  Temp. :  -5.72 C   Humid. : 30.89 % (  1.23 hPa )   Solar :  0.00 kW/m2
  Wind  :   0.64 m/s   94 deg   AirPressure : 570.45 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0426
================================ Receiver Cabin ===============================
  Main Cabin:  18.2 C  Upper Cabin:   9.2 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.74 degC   Humid. :  6.39 %
  DBE(MAC):   20.7 degC  28.0 degC  25.8 degC  23.6 degC
  DBE(WHSF):  20.0 degC  20.0 degC  21.0 degC  22.0 degC  22.0 degC  21.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.50 C   16.39 C   16.30 C   17.80 C   -2.40 C   17.60 C
  Internal Ret.    19.89 C   16.30 C   16.39 C   -5.00 C   16.50 C   17.10 C
  External        168.60 C   -4.30 C   -3.20 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.10 degC   19.20 degC   -6.70 degC
  Room Temp.:    16.89 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 486.154489392
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 486.154489392
vd0=0.650000, id0=5.000000
vd1=0.600000, id1=4.500000
vd2=0.600000, id2=4.500000
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50 
OK
> GET_CLNA 0 1 
0.654556,5.029602,-0.175217,0.604004,4.533691,-0.198074,0.604721,4.549713,-0.204666,1
> GET_CLNA 0 2 
0.653732,5.042419,-0.195267,0.604309,4.558105,-0.196335,0.604050,4.555359,-0.203354,1
> GET_CLNA 1 1 
0.654160,5.036926,-0.183167,0.604279,4.546204,-0.209869,0.604248,4.522400,-0.271805,1
> GET_CLNA 1 2 
0.654175,5.018158,-0.170822,0.604721,4.552307,-0.193451,0.604431,4.512939,-0.200775,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set Electro-magnet ###
/cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 486.154489392
v=17.500000, 21.500000, 13.800000, 19.100000
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> ACT_DEMAG 0 1 30.00 1.00 100 
OK
> ACT_DEMAG 0 2 30.00 1.00 100 
OK
> ACT_DEMAG 1 1 30.00 1.00 100 
OK
> ACT_DEMAG 1 2 30.00 1.00 100 
OK
> SET_MAG_C 0 1 17.50 
OK
> SET_MAG_C 0 2 21.50 
OK
> SET_MAG_C 1 1 13.80 
OK
> SET_MAG_C 1 2 19.10 
OK
> GET_MAG_VC 0 1 
0.234634,17.032242
> GET_MAG_VC 0 2 
0.278198,21.038818
> GET_MAG_VC 1 1 
0.181946,13.233185
> GET_MAG_VC 1 2 
0.261963,18.729401
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 486.154489392
486.154489 1.889833 1.851708 1.896000 1.849000
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.890 
OK
> SET_SIS_V 0 2 1.852 
OK
> SET_SIS_V 1 1 1.896 
OK
> SET_SIS_V 1 2 1.849 
OK
> GET_SIS_VC 0 1 
1.783981,81.030273
> GET_SIS_VC 0 2 
1.765289,85.842896
> GET_SIS_VC 1 1 
1.811829,80.789185
> GET_SIS_VC 1 2 
1.941681,977.117920
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 486.154489392
v=1.458413, -0.300000, 2.407557, -0.350000
ASTE FEMC:OPEN
FEMC_TCP 8 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_PA_VD 0 1.46 
OK
> SET_PA_VG 0 -0.30 
OK
> SET_PA_VD 1 2.41 
OK
> SET_PA_VG 1 -0.35 
OK
> GET_PA 0 
2.360229,207.855225,-0.290985
> GET_PA 1 
3.867493,231.887817,-0.345764
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE

[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t065250z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t065250z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t065250z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t065250z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161126t065250z mmc1 r reset_all.
mmc is active
20161126t065250z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161126t065252z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t065252z close_mmc(): socket '4' closed.
20161126t065252z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 12 dB      E/O att. = 12 dB    IF level=0.019530
new E/O att. = 12 dB    IF level=0.020244
new E/O att. = 10 dB    IF level=0.033054
new E/O att. = 12 dB    IF level=0.017176
new E/O att. = 10 dB    IF level=0.031879
10 dB  0.031879 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 14 dB    IF level=0.035555
new E/O att. = 14 dB    IF level=0.035754
new E/O att. = 13 dB    IF level=0.047338
new E/O att. = 12 dB    IF level=0.059720
new E/O att. = 13 dB    IF level=0.042516
13 dB  0.042516 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161126t065332z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t065332z open_mmc('mmc1:8501'): socket '4' connect success.
20161126t065332z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t065332z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161126t065332z mmc1 sky reset_all.
mmc is active
20161126t065332z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161126t065334z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t065334z close_mmc(): socket '4' closed.
20161126t065334z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
 . mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t065342z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t065342z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t065342z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t065342z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t065343z mmc1 r reset_all.
mmc is active
20161126t065343z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t065345z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t065345z close_mmc(): socket '8' closed.
20161126t065345z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 10 dB
 E/O IF level = 0.029300 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t065348z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t065348z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t065348z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t065348z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t065348z mmc1 sky reset_all.
mmc is active
20161126t065348z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t065350z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t065350z close_mmc(): socket '8' closed.
20161126t065350z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 10 dB
 E/O IF level = 0.023588 V
R=0.029300 V,  Sky=0.023588 V, Y=0.941765 dB
0.941765

[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161126t065400z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t065400z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t065400z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t065400z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t065401z mmc1 r reset_all.
mmc is active
20161126t065401z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161126t065403z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t065403z close_mmc(): socket '8' closed.
20161126t065403z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 13 dB
 E/O IF level = 0.045269 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161126t065406z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161126t065406z open_mmc('mmc1:8501'): socket '8' connect success.
20161126t065406z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161126t065406z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161126t065406z mmc1 sky reset_all.
mmc is active
20161126t065406z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161126t065408z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161126t065408z close_mmc(): socket '8' closed.
20161126t065408z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 13 dB
 E/O IF level = 0.037330 V
R=0.045269 V,  Sky=0.037330 V, Y=0.837429 dB
0.837429

↑

UTC0658 OTF mapping RCW38 X scan†

Filename: R38otfY

Weather

ASTE Environment Monitor 2016/11/26 06:59:06

===================================ASTE Site===================================
  Temp. :  -5.80 C   Humid. : 30.89 % (  1.23 hPa )   Solar :  0.00 kW/m2
  Wind  :   0.49 m/s   93 deg   AirPressure : 570.43 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0509
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.38 degC   Humid. :  6.55 %
  DBE(MAC):   20.3 degC  27.6 degC  25.7 degC  23.2 degC
  DBE(WHSF):  20.0 degC  20.0 degC  21.0 degC  22.0 degC  21.0 degC  21.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.39 C   11.50 C   15.80 C   17.39 C    8.40 C   17.70 C
  Internal Ret.    19.70 C   15.60 C   15.90 C   -5.80 C   16.20 C   16.80 C
  External        168.60 C   -2.00 C   -4.90 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    21.20 degC   20.30 degC   -7.80 degC
  Room Temp.:    18.10 degC

↑

UTC0755 OTF mapping RCW38 Yscan†

Filename: R38otfY

Weather

ASTE Environment Monitor 2016/11/26 07:57:12

===================================ASTE Site===================================
  Temp. :  -5.96 C   Humid. : 28.28 % (  1.11 hPa )   Solar :  0.00 kW/m2
  Wind  :   1.98 m/s  241 deg   AirPressure : 570.17 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0235
================================ Receiver Cabin ===============================
  Main Cabin:  19.0 C  Upper Cabin:   9.8 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.36 degC   Humid. :  6.51 %
  DBE(MAC):   20.3 degC  27.8 degC  25.7 degC  23.4 degC
  DBE(WHSF):  20.0 degC  20.0 degC  20.0 degC  22.0 degC  21.0 degC  20.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.20 C   16.00 C   17.50 C   18.60 C   -8.50 C   17.89 C
  Internal Ret.    19.80 C   16.00 C   17.30 C   17.60 C   16.50 C   17.50 C
  External        168.60 C   -5.20 C   -5.20 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.00 degC   18.70 degC   -7.50 degC
  Room Temp.:    16.80 degC

History of Observing Log/2016-11-26 (No. 2)

DASH345 check†

observer info†

UTC0257 12CO Mac LSB check (345.796 GHz IF = 5.8 GHz A1, A2: P1 LSB, A3, A4: P0 LSB)†

UTC0308 12CO Mac LSB check (345.796 GHz IF = 5.8 GHz A1, A2: P0 LSB, A3, A4: P1 LSB)†

UTC0319 12CO Mac LSB check (345.796 GHz IF = 6.0 GHz A1, A2: P1 LSB, A3, A4: P0 LSB)†

CI demo observation†

observer info†

UTC0350 Pointing O Cet with 12CO(4-3)†

UTC0418 Calbration source RCW38 core 1 with CI†

UTC0430 OTF mapping RCW38 Xscan†

UTC0524 OTF mapping RCW38 Yscan†

UTC0603 Lost Priority (during 48/61 scan)†

UTC0605 Restart OTF mapping from 46/61 scan†

UTC0619 Pointing RAFGL5254 with CO(4-3)†

UTC0630 Change Pointing source to IRC+10216†

UTC0646 Calibration source IRC+10216 with 12CO(4-3)†

UTC0650 Calibration source RCW38 core 1 with CI†

UTC0658 OTF mapping RCW38 X scan†

UTC0755 OTF mapping RCW38 Yscan†