2016-11-16(No. 2) - ASTE Observation Wiki

History
View the source.
Observing Log/2016-11-16 has been deleted.
- 1 (2016-11-16 (Wed) 12:40:11)
- 2 (2016-11-16 (Wed) 15:08:48)
- 3 (2016-11-16 (Wed) 19:06:48)
- 4 (2016-11-16 (Wed) 20:53:51)
- 5 (2016-11-20 (Sun) 19:56:38)

Observing Log

DASH345 check
- observer info
A16016
- observer info

DASH345 check†

↑

observer info†

izumi natsuko
skype: izumi.natsuko

↑

UTC0400 12CO Mac LSB check (345.796 GHz P0 LSB, P1 LSB)†

Group/Project/Filename: aste16/test/COcopML

Weather

 ASTE Environment Monitor 2016/11/16 04:02:04

===================================ASTE Site===================================
  Temp. :  -7.45 C   Humid. : 48.47 % (  1.69 hPa )   Solar :  0.00 kW/m2
  Wind  :   3.16 m/s  289 deg   AirPressure : 569.45 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0461
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.21 degC   Humid. :  9.62 %
  DBE(MAC):   20.2 degC  27.7 degC  25.5 degC  23.2 degC
  DBE(WHSF):  20.0 degC  20.0 degC  20.0 degC  21.0 degC  21.0 degC  20.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     16.89 C  -10.90 C   16.60 C   17.70 C   -8.90 C   17.60 C
  Internal Ret.    19.50 C   15.80 C   16.60 C   -3.70 C   16.30 C   16.89 C
  External        168.60 C    2.80 C   -6.70 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.70 degC   23.20 degC   -9.40 degC
  Room Temp.:    17.10 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.517963824
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.517963824
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.205002,10.054626,-0.279373,0.003326,0.012665,4.910629,0.003632,0.023193,4.910660,1
> GET_CLNA 0 2 
1.205200,10.045776,-0.382843,0.003235,0.023346,-4.848557,0.004120,0.021515,4.910568,1
> GET_CLNA 1 1 
1.205963,10.052795,-0.796982,0.003128,0.023193,-4.882004,0.003296,0.025177,-4.882080,1
> GET_CLNA 1 2 
1.206619,10.088196,-0.302322,0.003769,0.019073,-4.882034,0.003525,0.014648,4.931671,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.517963824
351.517964 2.100000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.100 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.981659,69.622803
> GET_SIS_VC 0 2 
1.783752,47.100830
> GET_SIS_VC 1 1 
1.808014,60.525513
> GET_SIS_VC 1 2 
1.813431,44.039917
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.517963824
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.517963824
/cosmos3/naoj/bin/loatt_dash345 293 286
Set ATT     : Pol0=293, Pol1=286
 Pol0 =      293   , Pol1 =      286
 Pol0 = 0.007151[A], Pol1 = 0.006981[A]
 Pol0 = 0.669875[V], Pol1 = 0.770135[V]

[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161116t040337z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t040337z open_mmc('mmc1:8501'): socket '4' connect success.
20161116t040337z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t040337z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161116t040337z mmc1 r reset_all.
mmc is active
20161116t040337z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161116t040340z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t040340z close_mmc(): socket '4' closed.
20161116t040340z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
 volt=0.030000
     E/O att. = 14 dB      E/O att. = 14 dB    IF level=0.039239
new E/O att. = 14 dB    IF level=0.039286
new E/O att. = 16 dB    IF level=0.023380
new E/O att. = 14 dB    IF level=0.042080
new E/O att. = 16 dB    IF level=0.023516
16 dB  0.023516 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 14 dB    IF level=0.059564
new E/O att. = 14 dB    IF level=0.060130
new E/O att. = 15 dB    IF level=0.044661
new E/O att. = 14 dB    IF level=0.062667
new E/O att. = 15 dB    IF level=0.044717
15 dB  0.044717 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161116t040415z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t040415z open_mmc('mmc1:8501'): socket '4' connect success.
20161116t040415z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t040415z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161116t040415z mmc1 sky reset_all.
mmc is active
20161116t040415z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161116t040417z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t040417z close_mmc(): socket '4' closed.
20161116t040417z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161116t040429z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t040429z open_mmc('mmc1:8501'): socket '8' connect success.
20161116t040429z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t040429z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161116t040429z mmc1 r reset_all.
mmc is active
20161116t040429z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161116t040431z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t040431z close_mmc(): socket '8' closed.
20161116t040431z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 16 dB
 E/O IF level = 0.025889 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161116t040434z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t040434z open_mmc('mmc1:8501'): socket '8' connect success.
20161116t040434z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t040434z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161116t040435z mmc1 sky reset_all.
mmc is active
20161116t040435z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161116t040437z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t040437z close_mmc(): socket '8' closed.
20161116t040437z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 16 dB
 E/O IF level = 0.012508 V
R=0.025889 V,  Sky=0.012508 V, Y=3.159274 dB
3.159274

[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161116t040445z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t040445z open_mmc('mmc1:8501'): socket '8' connect success.
20161116t040445z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t040445z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161116t040445z mmc1 r reset_all.
mmc is active
20161116t040446z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161116t040448z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t040448z close_mmc(): socket '8' closed.
20161116t040448z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.047048 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161116t040451z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t040451z open_mmc('mmc1:8501'): socket '8' connect success.
20161116t040451z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t040451z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161116t040451z mmc1 sky reset_all.
mmc is active
20161116t040451z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161116t040453z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t040453z close_mmc(): socket '8' closed.
20161116t040453z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.032996 V
R=0.047048 V,  Sky=0.032996 V, Y=1.540799 dB
1.540799

Observation
- Strange signal at P0

↑

UTC0414 12CO WHSF LSB check (345.796 GHz P0 LSB P1 LSB 356GHz: P0 USB P1 USB)†

Group/Project/Filename: aste16/test/COcopWL

Weather

ASTE Environment Monitor 2016/11/16 04:16:12

===================================ASTE Site===================================
  Temp. :  -6.98 C   Humid. : 38.55 % (  1.40 hPa )   Solar :  0.00 kW/m2
  Wind  :   3.04 m/s  291 deg   AirPressure : 569.29 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0855
================================ Receiver Cabin ===============================
  Main Cabin:  17.7 C  Upper Cabin:   8.4 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.24 degC   Humid. :  9.27 %
  DBE(MAC):   19.5 degC  25.0 degC  24.8 degC  23.0 degC
  DBE(WHSF):  19.0 degC  20.0 degC  20.0 degC  21.0 degC  21.0 degC  20.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     16.60 C   15.70 C   15.70 C   16.80 C   -9.90 C   17.10 C
  Internal Ret.    19.20 C   15.80 C   15.90 C   -5.60 C   16.10 C   16.50 C
  External        168.60 C   -7.80 C   -5.50 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.30 degC   19.60 degC  -10.00 degC
  Room Temp.:    17.30 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 350.837805072
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 350.837805072
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.204941,10.059814,-0.280365,0.003250,0.014191,4.910599,0.003662,0.022430,4.910538,1
> GET_CLNA 0 2 
1.204987,10.055389,-0.383179,0.003235,0.022583,-4.848694,0.004150,0.021820,4.910568,1
> GET_CLNA 1 1 
1.205994,10.046387,-0.797653,0.003098,0.021820,-4.882095,0.003189,0.024872,-4.882050,1
> GET_CLNA 1 2 
1.206665,10.095978,-0.302765,0.003738,0.020294,-4.881958,0.003433,0.014038,4.931625,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 350.837805072
350.837805 2.100000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.100 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.980438,58.642578
> GET_SIS_VC 0 2 
1.784286,40.405273
> GET_SIS_VC 1 1 
1.809845,36.877441
> GET_SIS_VC 1 2 
1.810455,30.929565
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 350.837805072
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 350.837805072
/cosmos3/naoj/bin/loatt_dash345 310 287
Set ATT     : Pol0=310, Pol1=287
 Pol0 =      310   , Pol1 =      287
 Pol0 = 0.007566[A], Pol1 = 0.007006[A]
 Pol0 = 0.673161[V], Pol1 = 0.770503[V]

[asteobs@aste-1c ~]$ whsf_tune S1USB S1LSB S2USB S2LSB
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161116t041713z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t041713z open_mmc('mmc1:8501'): socket '5' connect success.
20161116t041713z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t041713z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161116t041713z mmc1 r reset_all.
mmc is active
20161116t041713z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161116t041715z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t041715z close_mmc(): socket '5' closed.
20161116t041715z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	89.57	31.58	17.53	29.71	117.21	4.34	4.13	8.25	[mV]
	***Set ATT***
	S1USB:ATT_old = 16.00 [dB]
	S1USB:ATT_new = 17.50 [dB]
	S1LSB:ATT_old = 20.00 [dB]
	S1LSB:ATT_new = 17.25 [dB]
	S2USB:ATT_old = 20.00 [dB]
	S2USB:ATT_new = 14.75 [dB]
	S2LSB:ATT_old = 20.00 [dB]
	S2LSB:ATT_new = 17.00 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	61.67	63.01	56.35	56.84	80.50	9.62	11.99	14.70	[mV]
	***Set ATT***
	S1USB:ATT_old = 17.50 [dB]
	S1USB:ATT_new = 17.50 [dB]
	S1LSB:ATT_old = 17.25 [dB]
	S1LSB:ATT_new = 17.25 [dB]
	S2USB:ATT_old = 14.75 [dB]
	S2USB:ATT_new = 14.50 [dB]
	S2LSB:ATT_old = 17.00 [dB]
	S2LSB:ATT_new = 17.00 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	62.51	63.86	59.44	58.09	82.43	9.78	12.73	15.01	[mV]

[asteobs@aste-1c ~]$ whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161116t041738z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t041738z open_mmc('mmc1:8501'): socket '5' connect success.
20161116t041738z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t041738z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161116t041738z mmc1 r reset_all.
mmc is active
20161116t041738z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161116t041740z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t041740z close_mmc(): socket '5' closed.
20161116t041740z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	62.28	64.10	59.32	57.88	82.64	9.79	12.82	14.95	[mV]
	***Set ATT***
	S1IFA:ATT_old = 7.00 [dB]
	S1IFA:ATT_new = 6.75 [dB]
	S1IFB:ATT_old = 15.00 [dB]
	S1IFB:ATT_new = 5.50 [dB]
	S2IFA:ATT_old = 15.00 [dB]
	S2IFA:ATT_new = 6.75 [dB]
	S2IFB:ATT_old = 15.00 [dB]
	S2IFB:ATT_new = 7.25 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	62.03	63.23	59.18	57.42	86.28	89.63	72.85	73.42	[mV]
	***Set ATT***
	S1IFA:ATT_old = 6.75 [dB]
	S1IFA:ATT_new = 6.75 [dB]
	S1IFB:ATT_old = 5.50 [dB]
	S1IFB:ATT_new = 5.50 [dB]
	S2IFA:ATT_old = 6.75 [dB]
	S2IFA:ATT_new = 6.00 [dB]
	S2IFB:ATT_old = 7.25 [dB]
	S2IFB:ATT_new = 6.50 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	62.62	63.40	59.22	58.16	87.64	89.82	89.82	90.10	[mV]

[asteobs@aste-1c ~]$ whsf_rsky
Connected to: IF module
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161116t041801z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t041801z open_mmc('mmc1:8501'): socket '5' connect success.
20161116t041801z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t041801z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161116t041801z mmc1 r reset_all.
mmc is active
20161116t041801z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161116t041803z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t041803z close_mmc(): socket '5' closed.
20161116t041803z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	61.8	63.5	58.9	57.5	87.1	89.7	90.0	88.9	[mV]
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161116t041807z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t041807z open_mmc('mmc1:8501'): socket '5' connect success.
20161116t041807z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t041807z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161116t041807z mmc1 sky reset_all.
mmc is active
20161116t041807z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161116t041809z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t041809z close_mmc(): socket '5' closed.
20161116t041809z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	24.8	23.9	26.1	22.7	34.8	35.7	39.2	37.1	[mV]

	Result: R-SKY
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	3.965	4.253	3.531	4.035	3.988	4.004	3.611	3.798	[dB]

	Result: Tsys[Tamb=293K]
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	196.4	176.2	233.5	191.2	194.7	193.5	225.9	209.6	[K]

Observation
- Signal at P0 and P1 are good

↑

UTC0414 12CO WHSF LSB check (345.796 GHz P0 USB P1 USB 35GHz: P0 LSB P1 LSB)†

Group/Project/Filename: aste16/test/COcopWU

Weather

ASTE Environment Monitor 2016/11/16 04:27:20

===================================ASTE Site===================================
  Temp. :  -7.85 C   Humid. : 34.67 % (  1.17 hPa )   Solar :  0.00 kW/m2
  Wind  :   3.30 m/s  274 deg   AirPressure : 569.19 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0710
================================ Receiver Cabin ===============================
  Main Cabin:  17.5 C  Upper Cabin:   8.3 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.10 degC   Humid. :  9.21 %
  DBE(MAC):   18.3 degC  22.1 degC  23.7 degC  22.5 degC
  DBE(WHSF):  19.0 degC  20.0 degC  20.0 degC  22.0 degC  21.0 degC  21.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     16.30 C   16.39 C   16.60 C   17.70 C   14.60 C   17.20 C
  Internal Ret.    18.80 C   15.90 C   16.60 C   16.00 C   16.10 C   16.30 C
  External        168.60 C   -8.90 C   -9.00 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.50 degC   19.39 degC   -9.10 degC
  Room Temp.:    17.30 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 340.598026584
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 340.598026584
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
 ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.205032,10.056305,-0.280212,0.003235,0.013275,4.910599,0.003754,0.022888,4.910477,1
> GET_CLNA 0 2 
1.204910,10.054474,-0.383743,0.003174,0.023804,-4.848633,0.004089,0.021362,4.910538,1
> GET_CLNA 1 1 
1.205933,10.037689,-0.797592,0.003204,0.022430,-4.882065,0.003296,0.025177,-4.881973,1
> GET_CLNA 1 2 
1.206589,10.094452,-0.302917,0.003708,0.019226,-4.882019,0.003525,0.013580,4.931641,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 340.598026584
340.598027 1.923921 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.924 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.806946,18.899536
> GET_SIS_VC 0 2 
1.782303,12.463379
> GET_SIS_VC 1 1 
1.810150,13.110352
> GET_SIS_VC 1 2 
1.815414,13.623047
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 340.598026584
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 340.598026584
/cosmos3/naoj/bin/loatt_dash345 288 280
Set ATT     : Pol0=288, Pol1=280
 Pol0 =      288   , Pol1 =      280
 Pol0 = 0.007029[A], Pol1 = 0.006835[A]
 Pol0 = 0.669843[V], Pol1 = 0.769682[V]

[asteobs@aste-1c ~]$ whsf_tune S1USB S1LSB S2USB S2LSB
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161116t042933z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t042933z open_mmc('mmc1:8501'): socket '5' connect success.
20161116t042933z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t042933z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161116t042933z mmc1 r reset_all.
mmc is active
20161116t042933z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161116t042935z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t042935z close_mmc(): socket '5' closed.
20161116t042935z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	67.16	45.56	44.80	58.49	88.12	65.21	67.46	86.61	[mV]
	***Set ATT***
	S1USB:ATT_old = 17.50 [dB]
	S1USB:ATT_new = 17.75 [dB]
	S1LSB:ATT_old = 17.25 [dB]
	S1LSB:ATT_new = 16.25 [dB]
	S2USB:ATT_old = 14.50 [dB]
	S2USB:ATT_new = 13.25 [dB]
	S2LSB:ATT_old = 17.00 [dB]
	S2LSB:ATT_new = 17.00 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	63.92	58.98	58.98	59.25	84.22	84.14	88.48	87.39	[mV]
	***Set ATT***
	S1USB:ATT_old = 17.75 [dB]
	S1USB:ATT_new = 18.00 [dB]
	S1LSB:ATT_old = 16.25 [dB]
	S1LSB:ATT_new = 16.25 [dB]
	S2USB:ATT_old = 13.25 [dB]
	S2USB:ATT_new = 13.25 [dB]
	S2LSB:ATT_old = 17.00 [dB]
	S2LSB:ATT_new = 17.00 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	60.15	58.41	57.51	57.47	80.39	81.41	86.28	84.12	[mV]

[asteobs@aste-1c ~]$ whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161116t043013z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t043013z open_mmc('mmc1:8501'): socket '5' connect success.
20161116t043013z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t043013z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161116t043014z mmc1 r reset_all.
mmc is active
20161116t043014z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161116t043016z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t043016z close_mmc(): socket '5' closed.
20161116t043016z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	61.45	58.98	58.80	58.56	82.55	84.31	88.51	87.04	[mV]
	***Set ATT***
	S1IFA:ATT_old = 6.75 [dB]
	S1IFA:ATT_new = 6.50 [dB]
	S1IFB:ATT_old = 5.50 [dB]
	S1IFB:ATT_new = 5.25 [dB]
	S2IFA:ATT_old = 6.00 [dB]
	S2IFA:ATT_new = 6.00 [dB]
	S2IFB:ATT_old = 6.50 [dB]
	S2IFB:ATT_new = 6.50 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	60.80	58.75	58.34	58.46	87.15	89.09	87.41	86.11	[mV]
	***Set ATT***
	S1IFA:ATT_old = 6.50 [dB]
	S1IFA:ATT_new = 6.50 [dB]
	S1IFB:ATT_old = 5.25 [dB]
	S1IFB:ATT_new = 5.25 [dB]
	S2IFA:ATT_old = 6.00 [dB]
	S2IFA:ATT_new = 6.00 [dB]
	S2IFB:ATT_old = 6.50 [dB]
	S2IFB:ATT_new = 6.50 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	60.51	58.51	57.80	57.71	86.49	88.09	86.60	84.74	[mV]

[asteobs@aste-1c ~]$ whsf_rsky
Connected to: IF module
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161116t043036z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t043036z open_mmc('mmc1:8501'): socket '5' connect success.
20161116t043036z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t043036z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161116t043036z mmc1 r reset_all.
mmc is active
20161116t043036z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161116t043038z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t043038z close_mmc(): socket '5' closed.
20161116t043038z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	60.1	58.2	57.1	57.8	86.4	87.0	85.7	84.4	[mV]
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161116t043041z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t043041z open_mmc('mmc1:8501'): socket '5' connect success.
20161116t043041z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t043041z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161116t043042z mmc1 sky reset_all.
mmc is active
20161116t043042z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161116t043044z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t043044z close_mmc(): socket '5' closed.
20161116t043044z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	23.1	25.5	26.2	24.5	36.1	40.2	40.8	37.5	[mV]

	Result: R-SKY
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	4.143	3.589	3.378	3.725	3.794	3.359	3.229	3.525	[dB]

	Result: Tsys[Tamb=293K]
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	183.6	228.0	249.0	215.8	210.0	251.0	265.5	234.1	[K]

Observation
- Signal at P0 and P1 are good

↑

A16016†

↑

observer info†

izumi natsuko

↑

UTC0443 Pointing†

Filename: L2P-5p3

Weather

 ASTE Environment Monitor 2016/11/16 04:44:04

===================================ASTE Site===================================
  Temp. :  -9.37 C   Humid. : 33.71 % (  1.01 hPa )   Solar :  0.00 kW/m2
  Wind  :   0.81 m/s  207 deg   AirPressure : 569.28 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0368
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.13 degC   Humid. :  8.76 %
  DBE(MAC):   18.0 degC  21.1 degC  22.7 degC  22.2 degC
  DBE(WHSF):  19.0 degC  19.0 degC  20.0 degC  21.0 degC  21.0 degC  20.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     16.00 C   15.80 C   15.70 C   16.80 C  -10.40 C   16.70 C
  Internal Ret.    18.50 C   15.80 C   15.90 C   -4.90 C   15.90 C   16.10 C
  External        168.60 C   -9.80 C   -8.50 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.20 degC   21.70 degC   -9.60 degC
  Room Temp.:    15.80 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.549711696
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.549711696
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.205093,10.063934,-0.280304,0.003296,0.012817,4.910614,0.003586,0.023346,4.910538,1
> GET_CLNA 0 2 
1.204895,10.050507,-0.382553,0.003174,0.023193,-4.848740,0.004166,0.021973,4.910507,1
> GET_CLNA 1 1 
1.206009,10.048370,-0.797287,0.003174,0.021667,-4.882065,0.003326,0.025177,-4.881958,1
> GET_CLNA 1 2 
1.206589,10.095215,-0.302704,0.003738,0.020142,-4.882141,0.003525,0.012665,4.931595,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.549711696
351.549712 2.100000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.100 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.982040,73.120117
> GET_SIS_VC 0 2 
1.782150,48.461914
> GET_SIS_VC 1 1 
1.809006,67.510986
> GET_SIS_VC 1 2 
1.812210,47.161865
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.549711696
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.549711696
/cosmos3/naoj/bin/loatt_dash345 293 286
Set ATT     : Pol0=293, Pol1=286
 Pol0 =      293   , Pol1 =      286
 Pol0 = 0.007151[A], Pol1 = 0.006981[A]
 Pol0 = 0.671362[V], Pol1 = 0.771265[V]

[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161116t044651z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t044651z open_mmc('mmc1:8501'): socket '4' connect success.
20161116t044651z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t044651z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161116t044651z mmc1 r reset_all.
mmc is active
20161116t044651z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161116t044653z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t044653z close_mmc(): socket '4' closed.
20161116t044653z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 16 dB      E/O att. = 16 dB    IF level=0.025523
new E/O att. = 16 dB    IF level=0.025343
new E/O att. = 14 dB    IF level=0.041001
new E/O att. = 16 dB    IF level=0.022980
16 dB  0.022980 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 15 dB    IF level=0.048999
new E/O att. = 15 dB    IF level=0.049156
new E/O att. = 14 dB    IF level=0.064745
new E/O att. = 15 dB    IF level=0.046063
15 dB  0.046063 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161116t044745z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t044745z open_mmc('mmc1:8501'): socket '4' connect success.
20161116t044745z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t044745z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161116t044746z mmc1 sky reset_all.
mmc is active
20161116t044746z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161116t044748z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t044748z close_mmc(): socket '4' closed.
20161116t044748z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161116t044836z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t044836z open_mmc('mmc1:8501'): socket '8' connect success.
20161116t044836z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t044836z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161116t044836z mmc1 r reset_all.
mmc is active
20161116t044836z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161116t044838z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t044838z close_mmc(): socket '8' closed.
20161116t044838z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 16 dB
 E/O IF level = 0.025455 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161116t044842z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t044842z open_mmc('mmc1:8501'): socket '8' connect success.
20161116t044842z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t044842z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161116t044842z mmc1 sky reset_all.
mmc is active
20161116t044842z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161116t044844z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t044844z close_mmc(): socket '8' closed.
20161116t044844z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 16 dB
 E/O IF level = 0.012125 V
R=0.025455 V,  Sky=0.012125 V, Y=3.220914 dB
3.220914

[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161116t044856z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t044856z open_mmc('mmc1:8501'): socket '8' connect success.
20161116t044856z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t044856z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161116t044856z mmc1 r reset_all.
mmc is active
20161116t044856z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161116t044858z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t044858z close_mmc(): socket '8' closed.
20161116t044858z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.048838 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161116t044902z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161116t044902z open_mmc('mmc1:8501'): socket '8' connect success.
20161116t044902z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161116t044902z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161116t044902z mmc1 sky reset_all.
mmc is active
20161116t044902z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161116t044904z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161116t044904z close_mmc(): socket '8' closed.
20161116t044904z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.022089 V
R=0.048838 V,  Sky=0.022089 V, Y=3.445818 dB
3.445818

Pointing
- ddAz, ddEl = -1.5, -1.0

↑

UTC0510 Standard source†

Filename: OrK-c2C

Weather

 ASTE Environment Monitor 2016/11/16 05:11:25

===================================ASTE Site===================================
  Temp. :  -8.16 C   Humid. : 21.15 % (  0.70 hPa )   Solar :  0.00 kW/m2
  Wind  :   1.01 m/s  319 deg   AirPressure : 569.19 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0495
================================ Receiver Cabin ===============================
  Main Cabin:  17.3 C  Upper Cabin:   7.9 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.00 degC   Humid. :  8.30 %
  DBE(MAC):   17.6 degC  20.7 degC  22.2 degC  21.8 degC
  DBE(WHSF):  18.0 degC  19.0 degC  19.0 degC  20.0 degC  20.0 degC  19.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     15.60 C   15.30 C   15.30 C   15.70 C  -10.00 C   16.00 C
  Internal Ret.    17.89 C   15.40 C   15.50 C   -5.50 C   15.60 C   15.70 C
  External        168.60 C  -10.00 C   -7.40 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.60 degC   19.30 degC   -9.80 degC
  Room Temp.:    17.20 degC

Filename: OK-c2CW

↑

UTC0518 OTF mapping NOM2005-63 Xscan†

Weather

 ASTE Environment Monitor 2016/11/16 05:18:33

===================================ASTE Site===================================
  Temp. : -10.53 C   Humid. : 27.70 % (  0.76 hPa )   Solar :  0.00 kW/m2
  Wind  :   3.30 m/s  262 deg   AirPressure : 569.13 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0597
================================ Receiver Cabin ===============================
  Main Cabin:  17.4 C  Upper Cabin:   8.2 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.93 degC   Humid. :  8.17 %
  DBE(MAC):   17.6 degC  20.7 degC  22.2 degC  21.7 degC
  DBE(WHSF):  18.0 degC  19.0 degC  19.0 degC  20.0 degC  20.0 degC  19.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     15.50 C   15.40 C   15.10 C   16.10 C  -10.90 C   16.39 C
  Internal Ret.    17.80 C   15.40 C   15.40 C   -5.80 C   15.50 C   15.70 C
  External        168.60 C  -11.60 C   -9.50 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    23.50 degC   25.70 degC  -11.10 degC
  Room Temp.:    19.20 degC

↑

UTC0558 Lost priority (45/49 scan)..†

↑

UTC0600 Restart observation otf mapping NOM2005-63 Xscan (Start from 44/49 scan..)†

↑

UTC0607 OTF mapping NOM2005-63 Xscan†

Weather

ASTE Environment Monitor 2016/11/16 06:07:26

===================================ASTE Site===================================
  Temp. :  -7.11 C   Humid. : 20.36 % (  0.73 hPa )   Solar :  0.00 kW/m2
  Wind  :   2.34 m/s  255 deg   AirPressure : 568.85 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0212
================================ Receiver Cabin ===============================
  Main Cabin:  16.6 C  Upper Cabin:   7.9 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  13.85 degC   Humid. :  8.17 %
  DBE(MAC):   16.8 degC  20.1 degC  21.7 degC  21.2 degC
  DBE(WHSF):  18.0 degC  18.0 degC  19.0 degC  20.0 degC  20.0 degC  19.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     14.80 C   15.10 C   15.20 C   16.70 C   14.40 C   15.90 C
  Internal Ret.    17.39 C   14.70 C   15.50 C   15.60 C   15.00 C   15.30 C
  External        168.60 C  -12.10 C   -4.40 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.10 degC   19.10 degC  -12.10 degC
  Room Temp.:    16.80 degC

History of Observing Log/2016-11-16 (No. 2)

DASH345 check†

observer info†

UTC0400 12CO Mac LSB check (345.796 GHz P0 LSB, P1 LSB)†

UTC0414 12CO WHSF LSB check (345.796 GHz P0 LSB P1 LSB 356GHz: P0 USB P1 USB)†

UTC0414 12CO WHSF LSB check (345.796 GHz P0 USB P1 USB 35GHz: P0 LSB P1 LSB)†

A16016†

observer info†

UTC0443 Pointing†

UTC0510 Standard source†

UTC0518 OTF mapping NOM2005-63 Xscan†

UTC0558 Lost priority (45/49 scan)..†

UTC0600 Restart observation otf mapping NOM2005-63 Xscan (Start from 44/49 scan..)†

UTC0607 OTF mapping NOM2005-63 Xscan†