Observing Log



CSV2016: Long time integration in DASH345/BAND8 (2016-09-10)

Tasks

Preparations

  1. Basic checks
    • Record which kisa files are used for DASH345 and BAND8
    aste16@aste-ms1: ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
    lrwxrwxrwx 1 astecntl astctl 12 Jun  3  2015 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.150603
    lrwxrwxrwx 1 astecntl astctl 12 Jun  1  2015 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.150601
    • Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
    • Check Aspirin is working in the "WIND" mode
  2. Tuning at EL=60.0 deg

Radio pointing offsets of DASH345/BAND8

  1. Repeat cross scans toward Saturn and shots of a star one after the other
  2. Data reduction
    • Still under preparation

Information

Preparations

  1. Basic checks
    • Record which kisa files are used for DASH345 and BAND8
      [asteobs@aste-mt1 ~]$ ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
      lrwxrwxrwx 1 astecntl astctl 12 Jun  3  2015 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.150603
      lrwxrwxrwx 1 astecntl astctl 12 Jun  1  2015 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.150601
    • Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
    • Check Aspirin is working in the "WIND" mode
  2. Tuning at EL=60.0 deg
    • aste16/linux16/tEPC3ph.start
      2016/09/09 23:25:13
       Temp. :   1.62 C   Humid. :  5.45 % (  0.37 hPa )   Solar :  0.00 kW/m2
       Wind  :   3.87 m/s  195 deg   AirPressure : 573.77 hPa    ( Rain:  0.01 )
       Opacity @220 GHz :   0.0630
    Current time = 2016/09/09 23:25:21
    Aspirin time = 2016/09/09 23:25:20
    Weather time = 2016/09/09 23:25:14
    Aspirin Offset : (Az, El) = (  12.76,   0.87 )
    Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
    Refraction Corr. status : OK
    [asteobs@aste-1c ~]$ asterx_set DASH345
    ### Query of LO Freq ###
    LO Freq = 351.633622608
    ### Set CLNA ###
    /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.633622608
    vd0=1.200000, id0=10.000000
    vd1=0.000000, id1=0.000000
    vd2=0.000000, id2=0.000000
    ASTE FEMC:OPEN
    FEMC_TCP 7 
    
    Ver 0.91
    > 
    Program running.
    Do not turn off power to CAN nodes.
    ---------- 45 4C 01 08 00 E1nd at Node index 00
    AMBSI CAN Library V1.1.2
    AMBSI Firmware V1.0.1
    FEMC Firmware V2.5.0
    FPGA V2.1.0
    10 F2 B3 58 2 8 0 1B
    1 A4 9A 4F 14 0 0 19
    23 9B DE 4C 1 0 0 44
    0 0 0 0 0 0 0 0
    > SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
    OK
    > SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
    OK
    > SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
    OK
    > SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
    OK
    > GET_CLNA 0 1 
    1.204895,10.052185,-0.278030,0.003220,0.012665,4.909882,0.003586,0.022888,4.909790,1
    > GET_CLNA 0 2 
    1.204971,10.052032,-0.381439,0.003189,0.023346,-4.847900,0.004105,0.022125,4.909805,1
    > GET_CLNA 1 1 
    1.205856,10.051727,-0.795853,0.003174,0.021362,-4.881943,0.003204,0.024109,-4.881958,1
    > GET_CLNA 1 2 
    1.206558,10.094910,-0.301758,0.003662,0.018921,-4.881973,0.003403,0.013123,4.931473,1
    > CAN_CLOSE
    CAN closed
    ASTE FEMC:CLOSE
    ### Set SIS bias ###
    /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.633622608
    351.633623 1.900000 1.900000 1.900000 1.900000
    ASTE FEMC:OPEN
    FEMC_TCP 7 
    
    Ver 0.91
    > 
    Program running.
    Do not turn off power to CAN nodes.
    ---------- 45 4C 01 08 00 E1nd at Node index 00
    AMBSI CAN Library V1.1.2
    AMBSI Firmware V1.0.1
    FEMC Firmware V2.5.0
    FPGA V2.1.0
    10 F2 B3 58 2 8 0 1B
    1 A4 9A 4F 14 0 0 19
    23 9B DE 4C 1 0 0 44
    0 0 0 0 0 0 0 0
    > SET_SIS_MODE 0 
    SET SIS MODE:CLOSE LOOP
    > SET_SIS_V 0 1 1.900 
    OK
    > SET_SIS_V 0 2 1.900 
    OK
    > SET_SIS_V 1 1 1.900 
    OK
    > SET_SIS_V 1 2 1.900 
    OK
    > GET_SIS_VC 0 1 
    1.789017,43.161011
    > GET_SIS_VC 0 2 
    1.790466,30.383301
    > GET_SIS_VC 1 1 
    1.811600,46.865845
    > GET_SIS_VC 1 2 
    1.819382,33.923340
    > CAN_CLOSE
    CAN closed
    ASTE FEMC:CLOSE
    ### Set LO Power ###
    /cosmos3/naoj/bin/loatt_dash345_tune 351.633622608
    /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.633622608
    /cosmos3/naoj/bin/loatt_dash345 291 285
    Set ATT     : Pol0=291, Pol1=285
     Pol0 =      291   , Pol1 =      285
     Pol0 = 0.007101[A], Pol1 = 0.006956[A]
     Pol0 = 0.669497[V], Pol1 = 0.769017[V]
    [asteobs@aste-1c ~]$ mmc1_rstop
    . mmc1 is up and running
    /cosmos3/naoj/sbin/mmc1_com.exe r
    Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
    20160909t234155z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
    20160909t234155z open_mmc('mmc1:8501'): socket '4' connect success.
    20160909t234155z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
    20160909t234155z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
    seq_r start.
    cmd_reset_all()
    20160909t234156z mmc1 r reset_all.
    mmc is active
    20160909t234156z mmc1 is active.
    mode=0000 0
    mode=1000 4096
    mode=0000 0
    position 'R' verify ok.
    seq_r end.
    20160909t234158z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
    20160909t234158z close_mmc(): socket '4' closed.
    20160909t234158z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
    [asteobs@aste-1c ~]$ ifeo_tune 1 0.030
    14 dB  0.038169 V
    [asteobs@aste-1c ~]$ ifeo_tune 2 0.05 
    16 dB  0.056037 V
  3. for CONT
    [asteobs@aste-1c ~]$ swbox_ctl_be CONT
    [asteobs@aste-1c ~]$ swbox_ctl_be     
    status: swbox_ctl_be CONT
    [asteobs@aste-1c ~]$ cont_if 2 22
    changed Cont IF #2 att. = 22 [dB]
    Cont IF #2 Lev. = 0.000097 [V]
    [asteobs@aste-1c ~]$ cont_if 3 17
    Cont IF #3 Att. = 0 [dB]
    changed Cont IF #3 att. = 0 [dB]
    Cont IF #3 Lev. = -0.000270 [V]

Front page   New Page list Search Recent changes   Help   RSS of recent changes