History of Observing Log/2016-07-26 (No. 2)

• History
• View the source.
• Observing Log/2016-07-26 has been deleted.
  • 1 (2016-07-26 (Tue) 08:47:44)
  • 2 (2016-07-26 (Tue) 11:26:08)
  • 3 (2016-07-26 (Tue) 15:37:33)
  • 4 (2016-07-26 (Tue) 19:15:27)

---

#navi(contents-page-name): No such page: Observing Log

• 本日のアンテナ／カメラの状態について
  • 7/22, 24山頂作業でSQUIDノイズが改善したとみられる
  • 昨日teslx5使用 => teslx3に復帰
• Filter wheel
  • xyscan, zscan, moonを除く指示書(ただし、指示書名に _fw を含むものは除く)では、天体に追いついた後にフィルターホイールを用いた測定を実行します。実際の観測開始まで2分程度かかるので、お待ちください。
  • フィルターホイールの測定中は、teslc_check_process.sh で下記メッセージが表示されます。2分以上経過してもメッセージが表示される場合は tescam-obs に連絡して下さい。

    FW measurement is running. WAIT FOR ~ 2 MINUTES and TRY AGAIN.
     !!! FW IS BLOCKING THE LIGHT PATH. !!!

    • フィルターホイールの状態は、tescam monitorの最上段に5分毎に更新されますので適宜確認をお願いします。観測中は、motor1、motor2 の両方で Position が 0deg にあるのが正常です。

---

• Contents
  • Observing plan
  • Morning shift
    • Preparation
    • Skydip @El=60deg/filter wheel @El=90deg
  • Afternoon shift
  • Evening shift

---

Observing plan†

• check weather, webcam
• setup for observation
  • Restart COSMOS at site and local
  • Check aspirin status. if Wind OFF,

    asteobs@aste-1c: /cosmos3/naoj/bin/windsw off;/cosmos3/naoj/bin/windsw on 

  • teslx3 setup for observation

    teslx3> p3
    teslx3> setup_for_observation.sh

• UTC 3:55-4:30 Skydip @El=60deg/filter wheel @El=90deg 35min
  • skydip

    skydip_az180_el60_mp10_v1800.start

  • still

    still_az180_el60_t300.start

  • Filter wheel @El 90deg
    • El=90 degにmanualで駆動（Azは任意）

      teslx3> nohup scripts/batch_fw_attenuation.sh; nohup scripts/batch_fw_loading.sh; nohup scripts/batch_still_dark.sh; nohup scripts/batch_still_light.sh; beep.sh
      

    • After finish the scripts(beep), tap following command and copy and paste the info(4 lines) to this Log.

      teslx3> tail -100 history.txt | grep batch | grep START | tail -4

• UTC 4:00-4:30 Mars beammap 30min El:33-26

  mars_azel_raster_1080x720_d6_t6

• UTC 4:30-6:00 NGC6334i / GC 40min/each

  ngc6334i_lissajous_330_v150
  gc_raster_lb_7200x720_v600.start

• UTC 6:00-6:15 Pointing 15min (El40-36)

  G10.62_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start

• UTC 6:15-6:30 Pointing 15min (El54-51)

  J1924-292_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start

• UTC 7:00-8:00 Uranus beam map 50min (El38-47)

  uranus_azel_raster_1080x720_d6_t18

• UTC 8:00-8:15 Pointing 15min (El48-47)

  J2253-161_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start

• UTC 8:20-10:00 Uranus beam map 50min x 2 (El51-56)

  uranus_azel_raster_1080x720_d6_t18
  uranus_azel_raster_1080x720_d6_t18

• UTC 10:00-12:00 OMC-3, OMC-2, OrionKL (40minx3) (El32-41)

  omc3_radec_raster_720_d6_t12
  omc2_radec_raster_720_d6_t12
  orikl_radec_raster_720_d6_t12

• UTC 12:00-12:40 Skydip @El=60deg/filter wheel @El=90deg 35min
  • skydip

    skydip_az180_el60_mp10_v1800.start

  • still

    still_az180_el60_t300.start

  • Filter wheel @El 90deg
    • El=90 degにmanualで駆動（Azは任意）

      teslx3> nohup scripts/batch_fw_attenuation.sh; nohup scripts/batch_fw_loading.sh; nohup scripts/batch_still_dark.sh; nohup scripts/batch_still_light.sh; beep.sh
      

      # After finish the scripts, tap following command and copy and paste the info(4 lines) to this Log.

      teslx3> tail -100 history.txt | grep batch | grep START | tail -4

• HOME
  • Az, El = (180, 30)
  • priority release

Morning shift†

• Site: Mitaka
• Operator: N. Izumi, K. Ohtawara
• Contact: kawabe.ryohei2 (skype)

Preparation†

restart COSMOS on aste-1c and aste-mt1
wind off; wind on
teslx3> p3
Confirmation the end of tuning process (batch_20160725.sh)
teslx3> tail history.txt
        ## 2016/07/25 05:38 UTC END batch_20160724_1.sh
teslx3> ps -ef | grep batch

Skydip @El=60deg/filter wheel @El=90deg†

Afternoon shift†

• Site: Mitaka
• Operator:
• Contact:

Evening shift†

• site:
• Operator:
• Contact: