History of LANTAP allocation(No. 10)

Top/LANTAP allocation

Allocation table
How to control

Allocation table†

ch	memo	Model	Location
lantap0(192.168.11.140)		LT-1500	Cabin
	tap_sw tap_lt1500.py
(1)	aste-c1c - VME
(2)	aste-c1c - HDD
(3)	aste-c1c - CADAC
(4)	MMC1(192.168.11.179)
lantap1(192.168.11.149)		LT-1500	Obs. container
	tap_sw tap_lt1500.py
(1)	MAC - Digital Backend - Auto Correlator	2016/02/04 checked by TO
lantap2(192.168.11.148)		LT-1500
	tap_sw NG? tap_lt1500.py dasbox_sw ?
(1)	DASBOX
(4)	aste-rec
lantap3(192.168.11.147)		LT-1500
	tap_sw tap_lt1500.py
(1)	MAC - Digital Backend - A/D	2016/02/04 checked by TO
(2)	MAC - Digital Backend - Formatter	2016/02/04 checked by TO
(3)	MAC - Digital Backend - Host interface	2016/02/04 checked by TO
lantap4(192.168.11.146)		LT-1500	2016-01-28 checked TM / Meeting room
	tap_sw tap_lt1500.py
(1)	External light
(2)	webcam4		2016-01-28 checked TM
(3)	CADAC2 - Env.monitor		2016-01-28 checked TM
lantap5(192.168.11.145) - tap_sw2		LT-3000 ok	2016-01-28 checked TO / AZ Yoke
(1)	AZ clinometer		2016-01-28 checked TO
(2)	CADAC0		2016-01-28 checked TO
(3)	CADAC8		2016-01-28 checked TO
lantap6(192.168.11.144) - tap_sw2		LT-3000 down
(1)	Laboratory - External light (Telescope)
(2)	Laboratory - External light (Storate)
lantap7(192.168.11.143) - tap_sw2		LT-3000 ng
(1)	Power generator container - daq1
lantap8(192.168.11.142) - tap_sw2		LT-3000 ng
(1)	CADAC5@Antenna shelter
lantap9(192.168.11.141)		LT-1500	2016-01-22 checked TM / Obs.container., rack
	tap_sw tap_lt1500.py
(1)	aste-v1c - VME
(2)	aste-v1c - HDD
(3)	aste-v1c - CADAC(cadac1)
(4)	weather station
lantap10(192.168.11.150)		LT-3000	2016-01-28 checked TM / F-FX rack rear bottom
	tap_sw2 tap_lt3000.py
(1)	F-FX IFCTL
(2)	F-FX CORCTL/COROUT
(3)	16port sw - FH716XL	2016-01-28 checked TM
(4)
lantap11(192.168.11.159)		LT-3000	Cabin
	tap_sw2 tap_lt3000.py
(1)	WHSF Ref. Clock
(2)	WHSF Analog BE
(3)	WHSF ADX-830 #1
(4)	WHSF ADX-830 #2
lantap12(192.168.11.158)		LT-1500	2016-01-22 checked TM / Obs.container, center
	tap_sw tap_lt1500.py
(1)	aste-1s PC		2016-01-22 connected TM
(2)	aste-2s PC		2016-01-22 connected TM
(3)	aste-1x PC		2016-01-22 connected TM
(4)
lantap13(192.168.11.157)		LT-3000
	tap_sw2 tap_lt3000.py
(1)
(2)
(3)	F702FC(subref用)
(4)	subref PC
lantap14(192.168.11.156)		WATCH BOOT Light RPC-M5C	Cabin
	tap_rpc5lc.py
(1)	TES camera Backend
(2)	Lakeshore model 218 temperature monitor(GPID 4)
(3)	Agilent E3631A power supply #2(GPID 11)
(4)	NI GPIB-ENET/100 LAN-GPIB(IP:) for (2), (3)
lantap15(192.168.11.155)		WATCH BOOT Light RPC-M5C	Camera compressor box @ telescope veranda
	tap_rpc5lc.py ?
(1)	SUIFAN
(2)	OM heater
(3)	MOXA 5110-T
lantap16(192.168.11.154)
not in use
lantap17(192.168.11.153)
not in use
lantap18(192.168.11.152)
not in use
lantap19(192.168.11.151)
not in use
nyamatap(192.168.113.1) - nyamatap_sw
(1)	10MHz Reference
(2)	TX. Gunn oscillator
(3)	not in use
(4)	broken - DON'T ASSIGN THIS!

↑

How to control†

use 'tap_sw' command with full path for LT-1500

aste-1c:/cosmos3/naoj/bin/tap_sw [lantap#] [channel] [on|off]

use 'tap_lt1500.py' command for LT-1500

aste-1c:/cosmos3/naoj/bin/tap_lt1500.py [-v] 
aste-1c:/cosmos3/naoj/bin/tap_lt1500.py [-v] <lantap#>
aste-1c:/cosmos3/naoj/bin/tap_lt1500.py [-v] <lantap#> <channel> <on|off>

use 'tap_sw2' command with full path for LT-3000

aste-1c:/cosmos3/naoj/bin/tap_sw2 [lantap#] [channel] [on|off]

use 'tap_lt3000.py' command for LT3000

aste-1c:/cosmos3/naoj/bin/tap_lt3000.py [-v] 
aste-1c:/cosmos3/naoj/bin/tap_lt3000.py [-v] <lantap#>
aste-1c:/cosmos3/naoj/bin/tap_lt3000.py [-v] <lantap#> <channel> <on|off>

use 'tap_rpc5lc.py' command for RPC-M5C (or RPC-5LC)

aste-1c:/cosmos3/naoj/bin/tap_rpc5lc.py [-v] 
aste-1c:/cosmos3/naoj/bin/tap_rpc5lc.py [-v] <lantap#>
aste-1c:/cosmos3/naoj/bin/tap_rpc5lc.py [-v] <lantap#> <channel> <on|off>

e.g.) to turn off CADAC connected to aste-v1c

aste-1c:/cosmos3/naoj/bin/tap_sw lantap9 3 off

'tap_sw' は 'tap_lt1500.py' 、 'tap_sw2' は 'tap_lt3000.py' により置き換えるつもりでしたが、しばらく共存させます。
- rc3.d スクリプトで 'tap_sw2' などがハードコードされており、置き換えテストができていない。
  - /cosmos3/dev/aste (バイナリ部分のソース) については grep -r した限りでは、無さそう。
- 開発中のバタバタで体系的な記録が無い (というかリモートでは広範にテストしにくい) のですが、同モデルで新スクリプトの動作非動作の差が出た個体があった。
  - LANTAP のファームの版にバリエーションがあるのかも
  - (この件がその後の開発で解消したかどうか定かでありません、すいません)

History of LANTAP allocation (No. 10)

Allocation table†

How to control†