History of observation_finish (No. 1)

• History
• View the source.
• observation_finish has been deleted.
  • 1 (2019-06-21 (Fri) 08:08:44)
  • 2 (2020-04-02 (Thu) 00:28:50)

FrontPage

Observation Guide > Observation > Finish†

What's this page?

This page describes finish procedures in open-use program observations.

Table of contents

• Observation Guide > Observation > Finish
  • Observation > Finish
    • Stanby the antenna, and release the control priority
    • Send an e-mail

Observation > Finish†

Stanby the antenna, and release the control priority†

Set the antenna at its home position (AZ = 180, EL = 60) and standby mode by pushing 【STBY】 on COSMOS GUI. Release the priority by pushing "FREE" on the COSMOS GUI, and confirm that it is actually released with launcher software.

Send an e-mail†

Send e-mail to ASTE ML (aste-unyo"at-mark"alma.mtk.nao.ac.jp) ASTE Operation Support (aes.astesup"at-mark"gmail.com) (Please include the latter address if you are open-use program users. It is necessary to let him know your observation finish.) including the following information: observers name finish time observing site antenna status (at its home position?) priority information (the priority is released?) troubles during observations (if any)