Observing Log



Test observations with WHSF and MAC

Tasks

Prepartions

  1. Basic checks
    • Make sure that DASH3 and BAND8 are linked to the following files
      [aste17@aste-ms1 ~]$ ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
      lrwxrwxrwx 1 astecntl astctl 12 May 31 07:58 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.170531
      lrwxrwxrwx 1 astecntl astctl 12 May 31 07:33 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.170531
      • If not, contact with CSV lead.
    • Set all subref parameters (dx,dy,dz,dtx,dty,dtz) zeros in the subref offset GUI.
    • Confirm that Aspirin is working in the "WIND ON" mode. If not, start it following the instructions in How to restart Aspirin.

Test observations with WHSF and MAC

  1. Tune DASH345/BAND8
  2. Adjust pointing toward W Aql
    • W Aql
      aste17:calib/WAQD3ph.start     W Aql 12CO(3-2) MAC-HIGH Pointing(5-points)
      aste17:calib/WAQD3pw.start     W Aql 12CO(3-2) WHSF(2G) Pointing(5-points)
      aste17:calib/WAQB8ph.start     W Aql 12CO(4-3) MAC-HIGH Pointing(5-points)
      aste17:calib/WAQB8pw.start     W Aql 12CO(4-3) WHSF(2G) Pointing(5-points)
  3. Observe M17SW and/or W51D with WHSF/MAC
    • M17SW
      aste17:calref/M7cenM3.start    M17 12CO(3-2) MAC-HIGH PSW(center)
      aste17:calref/M7cenW3.start    M17 12CO(3-2) WHSF(2G) PSW(center)
      aste17:calref/M73mxM3.start    M17 12CO(3-2) MAC-HIGH OTF(x-direction)
      aste17:calref/M73mxW3.start    M17 12CO(3-2) WHSF(2G) OTF(x-direction)
    • W51D
      aste17:calref/W5cenM8.start    W51D 12CO(4-3) MAC-HIGH PSW(center)
      aste17:calref/W5cenW8.start    W51D 12CO(4-3) WHSF(2G) PSW(center)

Information


Front page   New Page list Search Recent changes   Help   RSS of recent changes