History of Observing Log/2016-12-06(No. 1)

History
View the source.
Observing Log/2016-12-06 has been deleted.
- 1 (2016-12-06 (Tue) 12:34:15)
- 2 (2016-12-06 (Tue) 15:12:19)
- 3 (2016-12-06 (Tue) 18:49:04)

Observing Log

A16016
- observer info
  - UTC0327 Pointing L2 Pup with 12CO(3-2)

A16016†

↑

observer info†

izumi natsuko

↑

UTC0327 Pointing L2 Pup with 12CO(3-2)†

Filename: L2P-5p3

Weather

ASTE Environment Monitor 2016/12/06 03:28:07
 
===================================ASTE Site===================================
  Temp. :  -0.20 C   Humid. : 25.69 % (  1.55 hPa )   Solar :  0.00 kW/m2
  Wind  :   1.14 m/s   98 deg   AirPressure : 572.45 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0629
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.14 degC   Humid. :  8.45 %
  DBE(MAC):   18.6 degC  26.9 degC  23.5 degC  23.1 degC
  DBE(WHSF):   0.0 degC   0.0 degC   0.0 degC   0.0 degC   0.0 degC   0.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     15.90 C  -11.20 C   17.00 C   17.70 C    8.60 C   16.20 C
  Internal Ret.    17.30 C   15.90 C   16.89 C   -7.80 C   16.39 C   15.70 C
  External        168.60 C   11.50 C    1.70 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    26.90 degC   29.10 degC    1.40 degC
  Room Temp.:    21.70 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.547208160
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.547208160
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7   

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.205017,10.064392,-0.278625,0.003281,0.012970,4.910004,0.003616,0.021973,4.910034,1
> GET_CLNA 0 2 
1.204926,10.057983,-0.382233,0.003220,0.023346,-4.848145,0.004105,0.021667,4.910034,1
> GET_CLNA 1 1 
1.205978,10.043640,-0.796219,0.003189,0.021667,-4.881973,0.003250,0.024719,-4.882004,1
> GET_CLNA 1 2 
1.206650,10.091553,-0.302628,0.003693,0.019073,-4.882034,0.003372,0.012817,4.931610,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.547208160
351.547208 2.100000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7   

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.100 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.986694,72.354126
> GET_SIS_VC 0 2 
1.789169,48.144531
> GET_SIS_VC 1 1 
1.811829,66.363525
> GET_SIS_VC 1 2 
1.821899,46.102905
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.547208160
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.547208160
/cosmos3/naoj/bin/loatt_dash345 293 286
Set ATT     : Pol0=293, Pol1=286
 Pol0 =      293   , Pol1 =      286
 Pol0 = 0.007151[A], Pol1 = 0.006981[A]
 Pol0 = 0.669765[V], Pol1 = 0.769382[V]

[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161206t032803z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161206t032803z open_mmc('mmc1:8501'): socket '4' connect success.
20161206t032803z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161206t032803z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161206t032803z mmc1 r reset_all.
mmc is active
20161206t032804z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161206t032806z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161206t032806z close_mmc(): socket '4' closed.
20161206t032806z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 16 dB      E/O att. = 16 dB    IF level=0.025414
new E/O att. = 16 dB    IF level=0.025526
new E/O att. = 14 dB    IF level=0.041060
new E/O att. = 16 dB    IF level=0.022954
16 dB  0.022954 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 16 dB    IF level=0.038886
new E/O att. = 16 dB    IF level=0.039013
new E/O att. = 15 dB    IF level=0.051276
new E/O att. = 16 dB    IF level=0.036480
new E/O att. = 15 dB    IF level=0.051360
15 dB  0.051360 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161206t032845z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161206t032845z open_mmc('mmc1:8501'): socket '4' connect success.
20161206t032845z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161206t032845z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161206t032845z mmc1 sky reset_all.
mmc is active
20161206t032845z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161206t032847z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161206t032847z close_mmc(): socket '4' closed.
20161206t032847z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161206t032856z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161206t032856z open_mmc('mmc1:8501'): socket '8' connect success.
20161206t032856z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161206t032856z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161206t032856z mmc1 r reset_all.
mmc is active
20161206t032856z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161206t032858z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161206t032858z close_mmc(): socket '8' closed.
20161206t032858z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 16 dB
 E/O IF level = 0.025404 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161206t032901z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161206t032901z open_mmc('mmc1:8501'): socket '8' connect success.
20161206t032901z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161206t032901z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161206t032902z mmc1 sky reset_all.
mmc is active
20161206t032902z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161206t032904z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161206t032904z close_mmc(): socket '8' closed.
20161206t032904z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
    E/O att. = 16 dB
 E/O IF level = 0.013138 V
R=0.025404 V,  Sky=0.013138 V, Y=2.863728 dB
2.863728

[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161206t032941z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161206t032941z open_mmc('mmc1:8501'): socket '8' connect success.
20161206t032941z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161206t032941z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161206t032941z mmc1 r reset_all.
mmc is active
20161206t032941z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161206t032943z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161206t032943z close_mmc(): socket '8' closed.
20161206t032943z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
   E/O att. = 15 dB
E/O IF level = 0.048859 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161206t032946z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161206t032946z open_mmc('mmc1:8501'): socket '8' connect success.
20161206t032946z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161206t032946z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161206t032947z mmc1 sky reset_all.
mmc is active
20161206t032947z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161206t032949z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161206t032949z close_mmc(): socket '8' closed.
20161206t032949z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
    E/O att. = 15 dB
 E/O IF level = 0.024329 V
R=0.048859 V,  Sky=0.024329 V, Y=3.028203 dB
3.028203

Pointing
- ddAz, ddEl =

History of Observing Log/2016-12-06 (No. 1)

A16016†

observer info†

UTC0327 Pointing L2 Pup with 12CO(3-2)†