Observing Log



CSV2016: Long time integration in DASH345/BAND8 (2016-09-10)

Tasks

Preparations

  1. Basic checks
    • Record which kisa files are used for DASH345 and BAND8
    aste16@aste-ms1: ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
    lrwxrwxrwx 1 astecntl astctl 12 Jun  3  2015 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.150603
    lrwxrwxrwx 1 astecntl astctl 12 Jun  1  2015 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.150601
    • Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
    • Check Aspirin is working in the "WIND" mode
  2. Tuning at EL=60.0 deg

Radio pointing offsets of DASH345/BAND8

  1. Repeat cross scans toward Saturn and shots of a star one after the other
  2. Data reduction
    • Still under preparation

Information

Preparations

  1. Basic checks
    • Record which kisa files are used for DASH345 and BAND8 [aste16@aste-ms1 ~]$ ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}" lrwxrwxrwx 1 astecntl astctl 12 Jun 3 2015 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.150603 lrwxrwxrwx 1 astecntl astctl 12 Jun 1 2015 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.150601
    • Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
    • Check Aspirin is working in the "WIND" mode
  2. Tuning at EL=60.0 deg
     ASTE Environment Monitor 2016/09/08 23:42:57
    
    ===================================ASTE Site===================================
      Temp. :  -1.98 C   Humid. :  8.05 % (  0.43 hPa )   Solar :  0.00 kW/m2
      Wind  :   3.09 m/s  232 deg   AirPressure : 572.71 hPa    ( Rain:  0.01 )
      Opacity @220 GHz :   0.0542
    ================================ Receiver Cabin ===============================
      Main Cabin:  19.0 C  Upper Cabin:  13.5 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
      SCD :   ----      ----      ----      ----
    ================================Observation Room===============================
      Temp. :  14.25 degC   Humid. :  4.01 %
      Digital BE:   21.10 degC   27.00 degC   26.20 degC   23.50 degC 
      Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
    -------------------------------Air Conditioners--------------------------------
      Internal Out     16.30 C   15.90 C   14.20 C   16.89 C   -2.10 C   17.30 C
      Internal Ret.    17.80 C   15.60 C   15.90 C    3.90 C   15.60 C   16.80 C
      External        168.60 C   -3.00 C    5.80 C  168.60 C
    ================================Antenna Shelter================================
      Air-cond. :    25.10 degC   24.10 degC   -1.90 degC
      Room Temp.:    21.80 degC
    1. Set antenna EL angle to 60 degrees
    2. Login to aste-1c with asteobs
    3. Select CONT BE
      [asteobs@aste-1c ~]$ swbox_ctl_be CONT
      [asteobs@aste-1c ~]$ swbox_ctl_be
      status: swbox_ctl_be CONT
    4. Select BAND8 and then, set the frequency of the synthesizer B
      [asteobs@aste-1c ~]$ asterx_sw BAND8 
      ---
      ### After setting synthe ###
      FREQ = 13.509950198 [GHz]
      AMPL = 13.00 [dBm]
      RF   = ON
      [asteobs@aste-1c ~]$ synthe_ctl B FREQ 11.444
      FREQ = 13.509950198 [GHz]
      AMPL = 13.00 [dBm]
      RF   = ON
      ### After setting synthe ###
      FREQ = 11.444000000 [GHz]
      AMPL = 13.00 [dBm]
      RF   = ON
    5. Tune BAND8
      [asteobs@aste-1c ~]$ asterx_set BAND8
      ### Query of LO Freq ###
      LO Freq = 411.984000000
      ---
      > GET_PA 0 
      2.965851,247.482300,-0.290833
      > GET_PA 1 
      4.022827,255.920410,-0.345917
    6. Select a sideband (LSB for BAND8)
      [asteobs@aste-1c ~]$ swbox_ctl_pol 1 0
      [asteobs@aste-1c ~]$ swbox_ctl_pol
      status: swbox_ctl_pol 1 0
      400:P1-LSB	402:P0-LSB
    7. Adjust signal levels input to DASBOX
      [asteobs@aste-1c ~]$ cont_if 2 21
      ---
      Cont IF #2 Lev. = -0.000349 [V]
      [asteobs@aste-1c ~]$ cont_if 3 23
      Cont IF #3 Att. = 0 [dB]
      changed Cont IF #3 att. = 0 [dB]
      recieved value = -2.73478000E-04
      
      recieved value = -2.73478000E-04
      Cont IF #3 Lev. = -0.000273 [V]

Radio pointing offsets of BAND8

  1. Initial pointing (using Saturn)
    • Group/Project/Filename: aste16/radpon/istx5b8.start
      ASTE Environment Monitor 2016/09/09 00:02:22
      
      ===================================ASTE Site===================================
        Temp. :  -2.23 C   Humid. :  9.19 % (  0.48 hPa )   Solar :  0.00 kW/m2
        Wind  :   3.09 m/s  260 deg   AirPressure : 572.77 hPa    ( Rain:  0.01 )
        Opacity @220 GHz :   0.0400
      ================================ Receiver Cabin ===============================
        Main Cabin:  19.5 C  Upper Cabin:  13.4 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
        SCD :   ----      ----      ----      ----
      ================================Observation Room===============================
        Temp. :  13.91 degC   Humid. :  4.10 %
        Digital BE:   20.70 degC   26.50 degC   25.80 degC   23.10 degC 
        Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
      -------------------------------Air Conditioners--------------------------------
        Internal Out     16.00 C   15.40 C   12.20 C   16.20 C    9.40 C   17.00 C
        Internal Ret.    17.50 C   15.10 C   15.10 C   -5.60 C   15.40 C   16.30 C
        External        168.60 C   -4.70 C    8.40 C  168.60 C
      ================================Antenna Shelter================================
        Air-cond. :    27.50 degC   30.20 degC   -3.20 degC
        Room Temp.:    26.00 degC
    • ddAz , ddEl = -1.2 , 4.2
    1. Check OPT images and start iOPT
      1. Start an obstable 't163-16C.start', which will just track a star continuously, in the project
      2. Login to the Mitaka analysis computer (e.g. aste-ms1) with aste16
        [asteobs@aste-mx1 ~]$ ssh -Y aste16@aste-ms1
      3. Initialize the video capture board (at the start of measurements once a day)
        [aste16@aste-ms1 ~]$ ssh astecntl@aste-c1c /cosmos3/naoj/sbinSol/optinit
        ssh_exchange_identification: read: Connection reset by peer
      • Check the status
        [asteobs@aste-mx1 ~]$ ssh asteobs@aste-1c
        [asteobs@aste-1c ~]$ ssh asteobs@tslinux
        ssh: connect to host tslinux port 22: No route to host
        Cannot connect tslinux....
      • Power cycle aste-c1c
        [asteobs@aste-1c ~]$ tap_lt1500.py lantap0 1 off
        POS=100,100,100,100
        POF1
        POS=000,100,100,100
        [asteobs@aste-1c ~]$ tap_lt1500.py lantap0 1 on
        POS=000,100,100,100
        PON1
        POS=100,100,100,100
      1. Retry
        [aste16@aste-ms1 ~]$ ssh astecntl@aste-c1c /cosmos3/naoj/sbinSol/optinit
        Warning: Permanently added '[200.91.21.138]:10322' (RSA) to the list of known hosts.

Front page   New Page list Search Recent changes   Help   RSS of recent changes