ASTE Environment Monitor 2016/09/05 04:28:05

===================================ASTE Site===================================

 Temp. :  -8.33 C   Humid. : 45.80 % (  1.49 hPa )   Solar :  0.00 kW/m2
 Wind  :  13.26 m/s  277 deg   AirPressure : 568.82 hPa    ( Rain:  0.01 )
 Opacity @220 GHz :   0.0700

================================ Receiver Cabin ===============================

 Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
 SCD :   ----      ----      ----      ----

================================Observation Room===============================

 Temp. :  12.65 degC   Humid. :  7.89 %
 Digital BE:   19.80 degC   25.50 degC   23.40 degC   21.20 degC 
 Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----

 Internal Out     13.70 C   15.10 C   14.20 C   16.30 C   13.70 C   15.90 C
 Internal Ret.    16.30 C   14.50 C   15.10 C   15.40 C   14.80 C   14.80 C
 External        168.60 C   -8.60 C   -0.50 C  168.60 C

================================Antenna Shelter================================

 Air-cond. :    24.10 degC   26.00 degC   -9.90 degC
 Room Temp.:    17.00 degC

[asteobs@aste-mx1 ~]$ [asteobs@aste-mx1 ~]$ ls

#test-iv.txt# AZTEC.160624 Desktop/ Downloads/ Pictures/ [asteobs@aste-mx1 ~]$ ssh aste-1c Warning: Permanently added 'aste-1c,200.91.21.140' (RSA) to the list of known hosts. Last login: Sun Sep 4 23:19:06 2016 from aste-mt1 [asteobs@aste-1c ~]$ ls %backup%~ GET_PA gnomedt/ itotetsu/ loatt_dash345 maekawa/ screenlog.0 ytamura/ Desktop@ autoweather.log hoge.sh kamazaki/ lopwr_band8 nohup.out ssh [asteobs@aste-1c ~]$ asterx_set usage: asterx_set [DASH345/BAND8] [asteobs@aste-1c ~]$ asterx_set DASH345

### Query of LO Freq ### LO Freq = 351.635748072

### Set CLNA ### /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.635748072 vd0=1.200000, id0=10.000000 vd1=0.000000, id1=0.000000 vd2=0.000000, id2=0.000000 ASTE FEMC:OPEN FEMC_TCP 7

Ver 0.91

Program running. Do not turn off power to CAN nodes.


AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0

SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 OK

GET_CLNA 0 1 1.204971,10.045166,-0.277908,0.003326,0.014496,4.911163,0.003601,0.023346,4.911179,1

GET_CLNA 0 2 1.205002,10.072021,-0.380646,0.003143,0.024109,-4.849121,0.004013,0.021820,4.911133,1

GET_CLNA 1 1 1.206100,10.028381,-0.794647,0.003265,0.022125,-4.882111,0.003281,0.025177,-4.882095,1

GET_CLNA 1 2 1.206619,10.085144,-0.300369,0.003723,0.020752,-4.881989,0.003464,0.014343,4.931747,1

CAN_CLOSE CAN closed ASTE FEMC:CLOSE

### Set SIS bias ### /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.635748072 351.635748 1.900000 1.900000 1.900000 1.900000 ASTE FEMC:OPEN FEMC_TCP 7

Ver 0.91

Program running. Do not turn off power to CAN nodes.


AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0

SET_SIS_MODE 0 SET SIS MODE:CLOSE LOOP

SET_SIS_V 0 1 1.900 OK

SET_SIS_V 0 2 1.900 OK

SET_SIS_V 1 1 1.900 OK

SET_SIS_V 1 2 1.900 OK

GET_SIS_VC 0 1 1.774979,157.037354

GET_SIS_VC 0 2 1.774445,126.074219

GET_SIS_VC 1 1 1.803360,31.774902

GET_SIS_VC 1 2 1.807785,23.226929

CAN_CLOSE CAN closed ASTE FEMC:CLOSE

### Set LO Power ### /cosmos3/naoj/bin/loatt_dash345_tune 351.635748072 /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.635748072 /cosmos3/naoj/bin/loatt_dash345 291 285 Set ATT : Pol0=291, Pol1=285

Pol0 =      291   , Pol1 =      285
Pol0 = 0.007105[A], Pol1 = 0.006958[A]
Pol0 = 0.683780[V], Pol1 = 0.780141[V]

[asteobs@aste-1c ~]$ loatt_dash345

Pol0 =      291   , Pol1 =      285
Pol0 = 0.007105[A], Pol1 = 0.006958[A]
Pol0 = 0.683458[V], Pol1 = 0.779865[V]

[asteobs@aste-1c ~]$ mmc1_rstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe r Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] 20160905t042243z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20160905t042243z open_mmc('mmc1:8501'): socket '4' connect success. 20160905t042243z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20160905t042243z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. seq_r start. cmd_reset_all() 20160905t042243z mmc1 r reset_all. mmc is active 20160905t042243z mmc1 is active. mode=0000 0 mode=1000 4096 mode=0000 0 position 'R' verify ok. seq_r end. 20160905t042245z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20160905t042245z close_mmc(): socket '4' closed. 20160905t042245z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. [asteobs@aste-1c ~]$ ifeo_tune 1 0.030 volt=0.030000

   E/O att. =  8 dB      E/O att. =  8 dB    IF level=0.005563

new E/O att. = 8 dB IF level=0.005608 new E/O att. = 6 dB IF level=0.231108 new E/O att. = 8 dB IF level=-0.016370

8 dB  -0.016370 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050 volt=0.050000

   E/O att. = 12 dB    IF level=0.132759

new E/O att. = 12 dB IF level=0.130974 new E/O att. = 13 dB IF level=0.105633 new E/O att. = 14 dB IF level=0.079953 new E/O att. = 15 dB IF level=0.060120 new E/O att. = 16 dB IF level=0.049238 new E/O att. = 15 dB IF level=0.071862 new E/O att. = 16 dB IF level=0.050086 16 dB 0.050086 V [asteobs@aste-1c ~]$ mmc1_sstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe sky Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] 20160905t042400z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20160905t042400z open_mmc('mmc1:8501'): socket '4' connect success. 20160905t042400z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20160905t042400z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. seq_sky start. cmd_reset_all() 20160905t042400z mmc1 sky reset_all. mmc is active 20160905t042400z mmc1 is active. mode=0000 0 mode=2000 8192 mode=0000 0 position 'SKY' verify ok. seq_sky end. 20160905t042402z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20160905t042402z close_mmc(): socket '4' closed. 20160905t042402z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. [asteobs@aste-1c ~]$ yfactor 1 Execute /cosmos3/naoj/bin/mmc1_rstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe r Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] seq_r start. seq_r end. 20160905t042413z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20160905t042413z open_mmc('mmc1:8501'): socket '8' connect success. 20160905t042413z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20160905t042413z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. cmd_reset_all() 20160905t042413z mmc1 r reset_all. mmc is active 20160905t042413z mmc1 is active. mode=0000 0 mode=1000 4096 mode=0000 0 position 'R' verify ok. 20160905t042415z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20160905t042415z close_mmc(): socket '8' closed. 20160905t042415z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. Execute /cosmos3/naoj/bin/ifeo 1

   E/O att. =  8 dB
E/O IF level = 0.005628 V

Execute /cosmos3/naoj/bin/mmc1_sstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe sky Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] seq_sky start. seq_sky end. 20160905t042419z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20160905t042419z open_mmc('mmc1:8501'): socket '8' connect success. 20160905t042419z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20160905t042419z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. cmd_reset_all() 20160905t042419z mmc1 sky reset_all. mmc is active 20160905t042419z mmc1 is active. mode=0000 0 mode=2000 8192 mode=0000 0 position 'SKY' verify ok. 20160905t042421z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20160905t042421z close_mmc(): socket '8' closed. 20160905t042421z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. Execute /cosmos3/naoj/bin/ifeo 1

   E/O att. =  8 dB
E/O IF level = 0.004084 V

R=0.005628 V, Sky=0.004084 V, Y=1.392684 dB 1.392684 [asteobs@aste-1c ~]$ yfactor usage: yfactor ifnum [asteobs@aste-1c ~]$ yfactor 2 Execute /cosmos3/naoj/bin/mmc1_rstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe r Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] seq_r start. seq_r end. 20160905t042445z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20160905t042445z open_mmc('mmc1:8501'): socket '8' connect success. 20160905t042445z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20160905t042445z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. cmd_reset_all() 20160905t042445z mmc1 r reset_all. mmc is active 20160905t042445z mmc1 is active. mode=0000 0 mode=1000 4096 mode=0000 0 position 'R' verify ok. 20160905t042447z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20160905t042447z close_mmc(): socket '8' closed. 20160905t042447z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. Execute /cosmos3/naoj/bin/ifeo 2

   E/O att. = 16 dB
E/O IF level = 0.051811 V

Execute /cosmos3/naoj/bin/mmc1_sstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe sky Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] seq_sky start. seq_sky end. 20160905t042450z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20160905t042450z open_mmc('mmc1:8501'): socket '8' connect success. 20160905t042450z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20160905t042450z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. cmd_reset_all() 20160905t042451z mmc1 sky reset_all. mmc is active 20160905t042451z mmc1 is active. mode=0000 0 mode=2000 8192 mode=0000 0 position 'SKY' verify ok. 20160905t042453z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20160905t042453z close_mmc(): socket '8' closed. 20160905t042453z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. Execute /cosmos3/naoj/bin/ifeo 2

   E/O att. = 16 dB
E/O IF level = 0.030501 V

R=0.051811 V, Sky=0.030501 V, Y=2.301079 dB 2.301079 [asteobs@aste-1c ~]$


Front page   New Page list Search Recent changes   Help   RSS of recent changes