History of Observing Log/2016-07-23 (No. 1)

• History
• View the source.
• Observing Log/2016-07-23 has been deleted.
  • 1 (2016-07-20 (Wed) 07:58:45)
  • 2 (2016-07-20 (Wed) 11:09:22)
  • 3 (2016-07-23 (Sat) 11:44:33)
  • 4 (2016-07-23 (Sat) 14:58:55)
  • 5 (2016-07-23 (Sat) 18:44:10)
  • 6 (2016-07-23 (Sat) 22:25:04)
  • 7 (2016-07-23 (Sat) 23:44:21)

---

#navi(contents-page-name): No such page: Observing Log

• 本日のアンテナ／カメラの状態について
  • 特記事項なし
• Filter wheel
  • xyscan, zscan, moonを除く指示書(ただし、指示書名に _fw を含むものは除く)では、天体に追いついた後にフィルターホイールを用いた測定を実行します。実際の観測開始まで2分程度かかるので、お待ちください。
  • フィルターホイールの測定中は、teslc_check_process.sh で下記メッセージが表示されます。2分以上経過してもメッセージが表示される場合は tescam-obs に連絡して下さい。

    FW measurement is running. WAIT FOR ~ 2 MINUTES and TRY AGAIN.
     !!! FW IS BLOCKING THE LIGHT PATH. !!!

    • フィルターホイールの状態は、tescam monitorの最上段に5分毎に更新されますので適宜確認をお願いします。観測中は、motor1、motor2 の両方で Position が 0deg にあるのが正常です。

---

• Contents
  • Observing plan
  • Morning shift

---

Observing plan†

• check weather, webcam
• setup for observation
  • Restart COSMOS at site and local
  • Check aspirin status. if Wind OFF,

    asteobs@aste-1c: /cosmos3/naoj/bin/windsw off;/cosmos3/naoj/bin/windsw on 

  • teslx3 setup for observation

    teslx3> p3
    teslx3> setup_for_observation.sh

• Skydip @El=60deg/filter wheel @El=90deg (UTC 0:00)
  • skydip

    skydip_az180_el60_mp10_v1800.start

  • still

    still_az180_el60_t300.start

  • FIlter wheel @El 90deg
    • El=90 degにmanualで駆動（Azは任意）
    • 所要時間 15min

      teslx3> nohup scripts/batch_fw_attenuation.sh; nohup scripts/batch_fw_loading.sh; nohup scripts/batch_still_dark.sh; nohup scripts/batch_still_light.sh; beep.sh
      

    • After finish the scripts(beep), tap following command and copy and paste the info(4 lines) to this Log.

      teslx3> tail -100 history.txt | grep batch | grep START | tail -4
      ex.) 
      ## 2016/06/20 10:45 (1466419550) UTC START batch_fw_attenuation.sh .
      ## 2016/06/20 10:47 (1466419664) UTC START batch_fw_loading.sh ..
      ## 2016/06/20 10:49 (1466419798) UTC START batch_still_dark.sh ..
      ## 2016/06/20 10:55 (1466420141) UTC START batch_still_light.sh ..

• Mars beammap (UTC 0.5-1)
  • beam map

    mars_azel_raster_1080x720_d6_t6 (30 min)

• Mars scan pattern test (UTC 1-2

• Mars scan pattern test (UTC 3.5-4.5)

  mars_daisy_test.list
  mars_daisy_test.list

  • contents

    mars_azel_daisy_120_v60.start
    mars_azel_daisy_120_v100.start
    mars_azel_daisy_120_v150.start
    mars_azel_daisy_120_v200.start
    mars_azel_daisy_120_v300.start
    mars_azel_daisy_120_v600.start
    mars_spiral_azel_240.start

• Mars beammap (UTC 4.5-5)
  • beam map@ El30 deg

    mars_azel_raster_1080x720_d6_t6 (30 min)

• 下記は時間に余裕があるので銀中、NGC6334、>10:30h以降はOrionをやってもいいかも
  • 銀中
  • NGC6334I
  • Orion

• Pointing (UTC 6:30-7:30)

  G10.62_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start
  繰り返し

• Pointing (UTC 7:30-8:00)

  J1924-292_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start
  J2253-161_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start

• Uranus beammap (UTC = 8:00-9:00)

  uranus_azel_raster_1080x720_d6_t18 (50 min)

• Pointing (UTC 9:00-9:30)

  J1924-292_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start
  J2253-161_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start

• Uranus beammap (UTC = 9:30-10:30)

  uranus_azel_raster_1080x720_d6_t18 (50 min)

• Pointing (UTC 10:30-11:00)

  J2253-161_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start
  PKS0537-441_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start

• Uranus beammap (UTC = 11:00-12:00)

  uranus_azel_raster_1080x720_d6_t18 (50 min)

• Skydip @El=60deg/filter wheel @El=90deg
  • skydip

    skydip_az180_el60_mp10_v1800.start

  • still

    still_az180_el60_t300.start

  • FIlter wheel @El 90deg
    • El=90 degにmanualで駆動（Azは任意）
    • 所要時間 15min

      teslx3> nohup scripts/batch_fw_attenuation.sh; nohup scripts/batch_fw_loading.sh; nohup scripts/batch_still_dark.sh; nohup scripts/batch_still_light.sh; beep.sh
      

      # After finish the scripts(beep), tap following command and copy and paste the info(4 lines) to this Log.

      teslx3> tail -100 history.txt | grep batch | grep START | tail -4
      ex.) 
      ## 2016/06/20 10:45 (1466419550) UTC START batch_fw_attenuation.sh .
      ## 2016/06/20 10:47 (1466419664) UTC START batch_fw_loading.sh ..
      ## 2016/06/20 10:49 (1466419798) UTC START batch_still_dark.sh ..
      ## 2016/06/20 10:55 (1466420141) UTC START batch_still_light.sh ..

• HOME
  • Az, El = (180, 30)
  • priority release

Morning shift†

• site:
• Operator:
• Contact: