History of Observing Log/2016-07-16 (No. 1)

• History
• View the source.
• Observing Log/2016-07-16 has been deleted.
  • 1 (2016-07-16 (Sat) 02:59:29)
  • 2 (2016-07-16 (Sat) 03:01:00)

---

#navi(contents-page-name): No such page: Observing Log

• アンテナの状態と観測について
  • JST 7/15 COSMOS Antenna consoleで interlockが表示されアンテナ制御ができません。GPIBエラーが継続して発生しており、現地で復旧作業予定です。本日は観測中止です。
• &color(foreground[,background]){text};
  • xyscan, zscan, moonを除く指示書(ただし、指示書名に _fw を含むものは除く)では、天体に追いついた後にフィルターホイールを用いた測定を実行します。実際の観測開始まで2分程度かかるので、お待ちください。
  • フィルターホイールの測定中は、teslc_check_process.sh で下記メッセージが表示されます。2分以上経過してもメッセージが表示される場合は tescam-obs に連絡して下さい。

    FW measurement is running. WAIT FOR ~ 2 MINUTES and TRY AGAIN.
     !!! FW IS BLOCKING THE LIGHT PATH. !!!

    • フィルターホイールの状態は、tescam monitorの最上段に5分毎に更新されますので適宜確認をお願いします。観測中は、motor1、motor2 の両方で Position が 0deg にあるのが正常です。

---

• Contents
  • Observing plan
  • Morning shift
  • Afternoon shift
  • Evening shift

---

Observing plan†

• check weather, webcam

• setup for observation
  • Restart COSMOS at site and local x 2
  • Check aspirin status. if Wind OFF,

    asteobs@aste-1c: /cosmos3/naoj/bin/windsw off;/cosmos3/naoj/bin/windsw on  
    teslx3> p3
    teslx3> setup_for_observation.sh

• Skydip @El=60deg/filter wheel @El=90deg
  • skydip

    skydip_az180_el60_mp10_v1800.start

  • still
  • El=90 degにmanualで駆動（Azは任意）

    still_az180_el60_t300.start

    • 所要時間 15min

      teslx3> nohup scripts/batch_fw_attenuation.sh; nohup scripts/batch_fw_loading.sh; nohup scripts/batch_still_dark.sh; nohup scripts/batch_still_light.sh; beep.sh
      # After finish the scripts(beep), tap following command and copy and paste the info(4 lines) to this Log.
      teslx3> tail -100 history.txt | grep batch | grep START | tail -4
      ex.) 
      ## 2016/06/20 10:45 (1466419550) UTC START batch_fw_attenuation.sh .
      ## 2016/06/20 10:47 (1466419664) UTC START batch_fw_loading.sh ..
      ## 2016/06/20 10:49 (1466419798) UTC START batch_still_dark.sh ..
      ## 2016/06/20 10:55 (1466420141) UTC START batch_still_light.sh ..

• Mars Beammap
  • beam map

    mars_azel_raster_1080x720_d6_t6 (20 min)

• Mars XYZ-scan band1/2 (UTC < 2)
  • batch mode

    mars_xyzscan_20160629.list

  • Repeat z-scan and xy-scan batch if < El 85 deg
  • contents

    mars_zscan_b1_ch055_v05_n2_rtn_pattern6.start 
    mars_zscan_b2_ch094_v05_n2_rtn_pattern6.start 
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm20yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm10yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp10yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp20yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym20.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym10.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp10.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp20.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
    mars_zscan_b1_ch086_v05_n2_rtn_pattern6.start 
    mars_zscan_b2_ch045_v05_n2_rtn_pattern6.start 
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm20yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm10yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp10yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp20yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym20.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym10.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp10.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp20.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start

• Skydip @El=60deg/filter wheel @El=90deg (UTC = 1 - 1.5)
  • skydip

    skydip_az180_el60_mp10_v1800.start

  • still

    still_az180_el60_t300.start

  • Filter wheel measurement
    • El=90 degにmanualで駆動（Azは任意）

      teslx3> nohup scripts/batch_fw_attenuation.sh; nohup scripts/batch_fw_loading.sh; beep.sh
      After finish the scripts(beep), tap following command and copy and paste the info. to this Log.
      teslx3> tail -100 history.txt | grep fw | grep START | tail -2

• Mars XYZ-scan band1/2 (UTC 1.5-)
  • batch mode

    mars_xyzscan_20160629.list

  • Repeat z-scan and xy-scan batch if El > 32-33 deg
  • contents

    mars_zscan_b1_ch055_v05_n2_rtn_pattern6.start 
    mars_zscan_b2_ch094_v05_n2_rtn_pattern6.start 
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm20yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm10yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp10yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp20yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym20.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym10.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp10.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp20.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
    mars_zscan_b1_ch086_v05_n2_rtn_pattern6.start 
    mars_zscan_b2_ch045_v05_n2_rtn_pattern6.start 
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm20yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm10yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp10yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp20yp00.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym20.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym10.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp10.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp20.start
    mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start

• Mars beammap (UTC 5.5-6)
  • beam map

    mars_azel_raster_1080x720_d6_t6 (20 min)

• Pointing (UTC 6-)
  • UTC < 8:30

    G10.62_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start
    繰り返し

  • UTC < 10:00

    J1924-292_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start
    J2253-161_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start

繰り返し

• Uranus (UTC = 10-11h)
  • beam map

    uranus_azel_raster_1080x720_d6_t18 (50 min)

• Pointing
  • UTC < 11:30

    PKS0537-441_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start
    uranus_
    neptune_

• Still/Skydip @El=60deg/filter wheel @El=90deg (UTC = 11:30 -12)
  • still

    still_az180_el60_t300.start

  • skydip

    skydip_az180_el60_mp10_v1800.start

  • El=90 degにmanualで駆動（Azは任意）
    • 各script の所要時間 ~ 5min

      teslx3> nohup scripts/batch_fw_attenuation.sh; nohup scripts/batch_fw_loading.sh; nohup scripts/batch_still_dark.sh; nohup scripts/batch_still_light.sh; beep.sh
      After finish the scripts(beep), tap following command and copy and paste the info. to this Log.
      teslx3> tail -100 history.txt | grep batch | grep START | tail -4

• HOME
  • Az, El = (180, 30)

---

Morning shift†

• site: Mitaka
• Operator :

Subref coordinates are not still loaded. Therefore,  observation doesn't start.

---

Afternoon shift†

• Site:
• Operator :

---

Evening shift†

• Site:
• Operator :