History of Observing Log/2016-02-05(No. 1)

History
View the source.
Observing Log/2016-02-05 has been deleted.
- 1 (2016-03-15 (Tue) 10:22:07)

Linux COSMOS3 data†

Mitaka

Observer: Kamazaki
Account: aste16
Project: linux16

01:00 Tuning (RDor-pw)

az,el = -180 60

2016/02/05 01:06:32
Temp. :  -1.32 C   Humid. : 71.03 % (  3.94 hPa )   Solar :  0.00 kW/m2
Wind  :  11.65 m/s  173 deg   AirPressure : 572.47 hPa    ( Rain:  0.04 )
Opacity @220 GHz :   0.2005

Current time = 2016/02/05 01:07:08
Aspirin time = 2016/02/05 01:07:01
Weather time = 2016/02/05 01:06:49
Aspirin Offset : (Az, El) = (   8.30,  10.99 )
Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
Refraction Corr. status : OK

> asterx_set DASH345
LO Freq = 351.563647080
Pol0 =      292   , Pol1 =      286
Pol0 = 0.007124[A], Pol1 = 0.006980[A]
Pol0 = 0.658300[V], Pol1 = 0.761772[V]
> mmc1_rstop
> ifeo_tune 1 0.030
16 dB  0.022468 V
> ifeo_tune 2 0.050
14 dB  0.042491 V
> mmc1_sstop
> yfactor 1
R=0.025000 V,  Sky=0.016208 V, Y=4.333709 dB
> yfactor 2
R=0.044166 V,  Sky=0.028017 V, Y=4.551438 dB

01:25 Pointing (RDor-pw)

az,el = -166 49
daz,del = 0.0 0.0
Tsys: A3=631 A4=682
Ta*:  A3=~3  A4=~3
-> RDor-pw.160205012558.01.nqm

~01:30 QLOOKL suddenly stopped updating its display.

01:37 Retry Pointing (RDor-pw)

az,el = -164 48
daz,del =  0.0 0.0
->        -4.0 0.0
-> RDor-pw.160205013806.01.nqm

Still no update in QLOOKL.
2016-02-05 01:37:55.196 aste-1c astqlsv DEB     normal connection from aste-1c
2016-02-05 01:41:29.893 aste-1c astqlsv DEB     adm: connection close
[root@aste-1c aste]# ./rc3.d/S99astqlsv stop
[root@aste-1c aste]# ./rc3.d/S99astqlsv start

01:45 Retry Pointing (RDor-pw)

az,el = -163 48
daz,del = -4.0 0.0

Still no update in QLOOKL.
[root@aste-mt1 asteobs]# /cosmos3/aste/rc3.d/S99astqllsv stop
[root@aste-mt1 asteobs]# /cosmos3/aste/rc3.d/S99astqllsv start

01:47 Retry Pointing (RDor-pw)

Now QLOOKL is updating!
az,el = -163 47
daz,del = -4.0  0.0
->      = -2.0 +1.0
Tsys: A2=602 A4=678
Ta*:  A2=~3  A4=~4
-> RDor-pw.160205014811.01.nqm

02:07 OriK-cw (to be reduced)

az,el = -41 67
daz,del = -2.0 +1.0
Tsys: 
Ta*: A2=~100  A4=~90

02:23 Orik-rw (to be reduced)

az,el = -48 65
daz,del = -2.0 +1.0
Tsys: A2=421 A4=519

2016/02/05 02:25:01
Temp. :  -2.75 C   Humid. : 78.45 % (  3.91 hPa )   Solar :  0.00 kW/m2
Wind  :   5.41 m/s  197 deg   AirPressure : 572.88 hPa    ( Rain:  0.04 )
Opacity @220 GHz :   0.1603

Current time = 2016/02/05 02:25:11
Aspirin time = 2016/02/05 02:25:10
Weather time = 2016/02/05 02:25:08
Aspirin Offset : (Az, El) = (   0.40,   1.21 )
Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
Refraction Corr. status : OK

~02:44 ERROR: Now observing. Cannot execute "Change Observer".
--- COSMOS3 MANAGER GUI ---
Group  Project Filename
aste16 linux16 RDor-pw
aste16 linux16 OriK-cw
aste16 linux16 OriK-rw
aste16 linux16 (blank)  <- when "List" was pressed.
--- COSMOS3 MANAGER GUI ---

UTC03:22 Tuning (I102-c2)

az,el = 42 60

2016/02/05 03:23:52
Temp. :  -2.57 C   Humid. : 70.23 % (  3.55 hPa )   Solar :  0.00 kW/m2
Wind  :   1.46 m/s  186 deg   AirPressure : 572.72 hPa    ( Rain:  0.03 )
Opacity @220 GHz :   0.1257

Current time = 2016/02/05 03:23:58
Aspirin time = 2016/02/05 03:23:57
Weather time = 2016/02/05 03:23:48
Aspirin Offset : (Az, El) = (   4.32,   1.11 )
Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
Refraction Corr. status : OK

> asterx_set DASH345
LO Freq = 350.943752064
Pol0 =      307   , Pol1 =      287
Pol0 = 0.007491[A], Pol1 = 0.007005[A]
Pol0 = 0.658476[V], Pol1 = 0.759868[V]
> loatt_dash345 -p0 248
> loatt_dash345 -p1 226
Pol0 =      248   , Pol1 =      226
Pol0 = 0.006051[A], Pol1 = 0.005516[A]
Pol0 = 0.647136[V], Pol1 = 0.745398[V]
> whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2
	***Set ATT***
	S1IFA:ATT_old = 6.50 [dB]
	S1IFA:ATT_new = 6.50 [dB]
	S1IFB:ATT_old = 6.00 [dB]
	S1IFB:ATT_new = 6.00 [dB]
	S2IFA:ATT_old = 6.75 [dB]
	S2IFA:ATT_new = 6.75 [dB]
	S2IFB:ATT_old = 6.75 [dB]
	S2IFB:ATT_new = 6.75 [dB]
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	61.81	57.77	57.23	63.55	94.77	91.05	88.51	90.17	[mV]
> whsf_rsky
	Result: R-SKY
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	1.755	2.255	1.757	2.044	1.788	2.251	1.892	1.969	[dB]
	Result: Tsys[Tamb=293K]
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	588.5	430.5	587.4	487.6	575.3	431.3	536.7	510.8	[K]
> mmc1_rstop
> whsf_stab 10
	*** average ***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	61.8	57.9	57.6	63.6	94.9	91.6	89.2	90.4	[mV]
	*** stability ***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	0.24	0.53	0.60	0.24	0.59	0.95	0.93	0.60	[%]

03:32 Tuning (jup-xc)
```
az,el = +69 32
```

03:33 jup-xc

The number of cycles was reduced to 20 from 100 in "DASH3_cross_ae4m".
az,el = +69 32
Tsys = 558
-> CONT.jup-xc.aste16.linux16.201602050334.LCK

&ref(): File not found: "CONT.jup-xc.aste16.linux16.201602050334.png" at page "Observing Log/2016-02-05";

Cross scan is running, but no result is plotted in QLOOKC. Its messages are here:
START OBSERVATION
START qlookc_main
Waiting for Start-Flag

03:38 Retry jup-xc

az,el = +68 33
Tsys = 530
-> CONT.jup-xc.aste16.linux16.201602050339.LCK

&ref(): File not found: "CONT.jup-xc.aste16.linux16.201602050339.png" at page "Observing Log/2016-02-05";

Cross scan is running from looking at SCM, but no result is displayed on QLOOKC.
Here are some error messages from it.
ERR!!STOP OBSERVATION
No.Channel != No.Rx
Check Obstable(Device Table)!!

03:52 Retry jup-xc

az,el = +66 36
Tsys = 509
-> CONT.jup-xc.aste16.linux16.201602050352.LCK

&ref(): File not found: "CONT.jup-xc.aste16.linux16.201602050352.png" at page "Observing Log/2016-02-05";

After changing from ch12-13 to only ch12 in a device table, the previous message was gone.
But, the next error is negative Tsys as shown below:
Calibration   2016-02-05  03:56:40
Atm_tmp: -2.8 Tsys: Can't get Tsys !!
   Sky  cal_R:  -19846.8  cal_Sky:  -12647.7
ch-01  cal_R:  -19817.7  cal_Sky:  -12616.4  cal_factor:  0.038

Just incase, prebox was done. 
[asteobs@aste-1c ~]$ prebox
Ch 0   Gain:5 (+-  0.312 V)
Ch 1   Gain:5 (+-  0.312 V)
Ch 2   Gain:1 (+-  5.000 V)
Ch 3   Gain:5 (+-  0.312 V)
Ch 4   Gain:5 (+-  0.312 V)
Ch 5   Gain:5 (+-  0.312 V)
Ch 6   Gain:3 (+-  1.250 V)
Ch 7   Gain:3 (+-  1.250 V)
Ch 8   Gain:3 (+-  1.250 V)
Ch 9   Gain:0 (+- 10.000 V)
Ch 10   Gain:1 (+-  5.000 V)
Ch 11   Gain:1 (+-  5.000 V)
Ch 12   Gain:1 (+-  5.000 V)
Ch 13   Gain:0 (+- 10.000 V)
Ch 14   Gain:1 (+-  5.000 V)
Ch 15   Gain:0 (+- 10.000 V)
Gain set PREBOX
Cutoff set PREBOX

03:56 jup-xc
```
az,el = +62 41
Tsys = 478
-> CONT.jup-xc.aste16.linux16.201602050356.LCK
```
&ref(): File not found: "CONT.jup-xc.aste16.linux16.201602050356.png" at page "Observing Log/2016-02-05";
```
Same Tsys calculation error in QLOOKC.
```

04:19 jup-xc

az,el = +62 41
Tsys = 434
-> CONT.jup-xc.aste16.linux16.201602050419.LCK

&ref(): File not found: "CONT.jup-xc.aste16.linux16.201602050419.png" at page "Observing Log/2016-02-05";

Still neither Tsys nor CONT data on QLOOKC.
A LCK file looks to be ok, but no plot. Why?
/cosmos3/aste/etc/cont_inv.dat was changed from "ON" to "OFF".

04:34 jup-xc

az,el = +59 44
Tsys = 393
-> CONT.jup-xc.aste16.linux16.201602050434.LCK

&ref(): File not found: "CONT.jup-xc.aste16.linux16.201602050434.png" at page "Observing Log/2016-02-05";

The LCK file shows inverted profile.
"ON" was recovered in /cosmos3/aste/etc/cont_inv.dat.
[root@aste-1c rc3.d]# ls -l /cosmos3/aste/etc/cont_inv.dat
-rw-r--r-- 1 astecntl astctl 3 Feb  5 04:41 /cosmos3/aste/etc/cont_inv.dat
[root@aste-1c rc3.d]# cat /cosmos3/aste/etc/cont_inv.dat
ON

04:43 jup-xc

az,el = +56 46
daz,del = -2.0 +1.0
Tsys = 392
-> CONT.jup-xc.aste16.linux16.201602050443
lp sc  amplitude  offset  fwhm
00 x   2945.259   -3.615  +36.000
00 y   3005.998   +5.854  +36.774
01 x   2981.417   -3.775  +36.054
01 y   2967.076   +5.601  +35.043

&ref(): File not found: "CONT.jup-xc.aste16.linux16.201602050443plot0.png" at page "Observing Log/2016-02-05"; &ref(): File not found: "CONT.jup-xc.aste16.linux16.201602050443plot1.png" at page "Observing Log/2016-02-05";

Positive profile could be seen toward Jupiter and Load.
We gave up QLOOKC and decided to go ahead without it.

04:45 jup-rc

Failed due to old observation table (blank in 'VREF').

04:47 jup-rc

Failed due to full command buffer.
Its workaround was to reduce the number of maps in a scan table.

04:54 jup-rc (done)
```
az,el = +54 48
Tsys = 364, 337
-> CONT.jup-rc.aste16.linux16.201602050454.LCK
```
&ref(): File not found: "CONT.jup-rc.aste16.linux16.201602050454.png" at page "Observing Log/2016-02-05"; &ref(): File not found: "CONT.jup-rc.aste16.linux16.201602050454.ch0.png" at page "Observing Log/2016-02-05";
```
number of maps -> 1
```

05:05 jup-sc (done)

az,el = 51,50
daz,del = -2.0 +1.0
Tsys: ?
-> CONT.jup-sc.aste16.linux16.201602050506.LCK

&ref(): File not found: "CONT.jup-sc.aste16.linux16.201602050506.png" at page "Observing Log/2016-02-05"; &ref(): File not found: "CONT.jup-sc.aste16.linux16.201602050506.ch0.png" at page "Observing Log/2016-02-05";

number of maps -> 1

2016/02/05 05:06:31
Temp. :  -2.61 C   Humid. : 63.67 % (  3.21 hPa )   Solar :  0.00 kW/m2
Wind  :   1.30 m/s  253 deg   AirPressure : 572.28 hPa    ( Rain:  0.02 )
Opacity @220 GHz :   0.1066

Current time = 2016/02/05 05:06:28
Aspirin time = 2016/02/05 05:06:27
Weather time = 2016/02/05 05:06:17
Aspirin Offset : (Az, El) = (  -7.20,   5.16 )
Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
Refraction Corr. status : OK

05:24 Tuning (I102-ch)

az,el = -2 60

> asterx_set DASH345
LO Freq = 351.623580504
Pol0 =      291   , Pol1 =      285
Pol0 = 0.007099[A], Pol1 = 0.006956[A]
Pol0 = 0.653908[V], Pol1 = 0.758440[V]
> mmc1_rstop
> ifeo_tune 1 0.030
16 dB  0.023786 V
> ifeo_tune 2 0.050
13 dB  0.053859 V
> mmc1_sstop
> yfactor 1
R=0.025648 V,  Sky=0.015367 V, Y=5.122432 dB
> yfactor 2
R=0.051908 V,  Sky=0.030079 V, Y=5.456457 dB

05:35 Pointing (I102-ph)

az,el = -5 60
daz,del = -2.0 +1.0

no update in QLOOKL.
[root@aste-1c aste]# ./rc3.d/S99astqlsv stop
[root@aste-1c aste]# ./rc3.d/S99astqlsv start
[root@aste-mt1 asteobs]# /cosmos3/aste/rc3.d/S99astqllsv stop
[root@aste-mt1 asteobs]# /cosmos3/aste/rc3.d/S99astqllsv start

05:42 Pointing (I102-ph)

Still no update in QLOOKL.
asteobs@aste-1c:sudo /cosmos3/naoj/sbin/cos3_cntl restart

05:45 Pointing (I102-ph)

Still no update in QLOOKL.
asteobs@aste-1c:sudo /cosmos3/naoj/sbin/cos3_cntl stop
[root@aste-1c rc3.d]# ./S99astqllsv stop
[root@aste-1c rc3.d]# ./S99astqlsv stop
[root@aste-1c rc3.d]# ./S99astqlsv start
[root@aste-1c rc3.d]# ./S99astqllsv start
asteobs@aste-1c:sudo /cosmos3/naoj/sbin/cos3_cntl start

05:52 Pointing (I102-ph)

az,el = -13 53
daz,del = -2.0 +1.0
->      = +4.0 -1.0
Tsys: A2=406 A4=481
Ta*:  A2=22  A4=19
-> I102-ph.160205055222.01.nqm
Now spectra are plotted.
Spurious signals at A2.

06:05 I102-ch (done)

az,el = -18 52
daz,del = +4.0 -1.0
Tsys: A1=374 A4=452
Ta*:  A1=~20 A4=~20
-> I102-ch.160205060514.01.nqm
baseline subtraction:
  all: 1st-order polynomial function (fit ranges=[200,300],[700,800]ch)

A1&ref(): File not found: "i1cha1l5a.png" at page "Observing Log/2016-02-05"; A2&ref(): File not found: "i1cha2l5a.png" at page "Observing Log/2016-02-05"; A3&ref(): File not found: "i1cha3l5a.png" at page "Observing Log/2016-02-05"; A4&ref(): File not found: "i1cha4l5a.png" at page "Observing Log/2016-02-05";
Spurious signals in A2

2016/02/05 06:08:24
Temp. :  -3.01 C   Humid. : 65.42 % (  3.20 hPa )   Solar :  0.00 kW/m2
Wind  :   2.65 m/s  253 deg   AirPressure : 571.90 hPa    ( Rain:  0.03 )
Opacity @220 GHz :   0.1416

Current time = 2016/02/05 06:08:20
Aspirin time = 2016/02/05 06:08:18
Weather time = 2016/02/05 06:08:13
Aspirin Offset : (Az, El) = (   3.20,  -1.55 )
Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
Refraction Corr. status : OK

06:13 I102-rh (done)

az,el = -21 52
daz,del = +4.0 -1.0
Tsys: A1=380 A4=456
-> I102-rh.IRC+10216.20160205061322.4.Y
baseline subtraction:
  all: 1st-order polynomial function (fit ranges=[200,300],[700,800]ch)

06:34 I102-sh (done)

az,el = -28 50
daz,del = +4.0 -1.0
Tsys: A1=399 A4=481
-> I102-sh.IRC+10216.20160205063420.4.Y
baseline subtraction:
  all: 1st-order polynomial function (fit ranges=[200,300],[700,800]ch)

-> I102-rh.IRC+10216.20160205061322.4.Y + I102-sh.IRC+10216.20160205063420.4.Y
map:
  all: blc=[+57,-57] pix  trc=[-57,+57] pix  vel=-48.0~-4.0 km/s
       dra=3.0 arcsec  ddec=3.0 arcsec  dvel=4.0 km/s

A1&ref(): File not found: "i1rsh1l5a_chmap.png" at page "Observing Log/2016-02-05"; A3&ref(): File not found: "i1rsh3l5a_chmap.png" at page "Observing Log/2016-02-05";
A4&ref(): File not found: "i1rsh4l5a_chmap.png" at page "Observing Log/2016-02-05";
No map was created in A2 due to spurious signals.

07:00 Tuning (I102-p2)

az,el = -36 46

2016/02/05 07:00:54
Temp. :  -2.76 C   Humid. : 56.16 % (  2.80 hPa )   Solar :  0.00 kW/m2
Wind  :   1.66 m/s  229 deg   AirPressure : 571.65 hPa    ( Rain:  0.02 )
Opacity @220 GHz :   0.1205

Current time = 2016/02/05 07:00:50
Aspirin time = 2016/02/05 07:00:49
Weather time = 2016/02/05 07:00:43
Aspirin Offset : (Az, El) = (   5.59,  -0.89 )
Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
Refraction Corr. status : OK

> asterx_set DASH345
LO Freq = 350.943221952
> loatt_dash345 -p0 248
> loatt_dash345 -p1 226
Pol0 =      248   , Pol1 =      226
Pol0 = 0.006051[A], Pol1 = 0.005515[A]
Pol0 = 0.646677[V], Pol1 = 0.745049[V]
> whsf_tune S1USB S1LSB S2USB S2LSB
	***Set ATT***
	S1USB:ATT_old = 18.00 [dB]
	S1USB:ATT_new = 18.00 [dB]
	S1LSB:ATT_old = 18.50 [dB]
	S1LSB:ATT_new = 18.50 [dB]
	S2USB:ATT_old = 18.75 [dB]
	S2USB:ATT_new = 18.75 [dB]
	S2LSB:ATT_old = 16.75 [dB]
	S2LSB:ATT_new = 16.75 [dB]
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	62.40	60.06	59.65	60.48	94.19	93.12	83.37	85.06	[mV]
> whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2
	***Set ATT***
	S1IFA:ATT_old = 6.50 [dB]
	S1IFA:ATT_new = 6.50 [dB]
	S1IFB:ATT_old = 6.00 [dB]
	S1IFB:ATT_new = 6.00 [dB]
	S2IFA:ATT_old = 5.50 [dB]
	S2IFA:ATT_new = 6.75 [dB]
	S2IFB:ATT_old = 6.75 [dB]
	S2IFB:ATT_new = 6.75 [dB]
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	62.77	60.73	60.06	60.86	95.76	94.98	64.02	86.32	[mV]
> whsf_rsky
	Result: R-SKY
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	2.049	2.528	1.964	2.319	2.110	2.468	2.071	2.204	[dB]
	Result: Tsys[Tamb=293K]
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	486.1	371.0	512.4	415.3	468.4	383.0	479.5	443.2	[K]
> mmc1_rstop
> whsf_stab 10
	*** average ***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	62.3	60.3	59.9	60.6	94.4	93.8	89.3	85.4	[mV]
	*** stability ***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	0.20	0.32	0.32	0.23	0.52	0.60	2.85	0.50	[%]

07:08 Pointing (I102-p2)

az,el = -39 45
daz,del = +4.0 -1.0
-> +4.0 -1.0
Tsys: X3=379 X4=432
Ta*:  X3=21  X4=24
-> I102-p2.160205070841.01.nqm
07:17:40 Tried to set ddEL=-1 but failed.
Pointing offset is +1.0 at EL. So continued without applying it.

07:20 I102-r2 (done)

az,el = -42 44
daz,del = +4.0 -1.0
Tsys: X3= X4=
-> I102-r2.IRC+10216.20160205071958.6.Y
baseline subtraction:
  X3: 2nd-order polynomial function (fit ranges=[480,500],[525,545]ch)
  X4: 2nd-order polynomial function (fit ranges=[480,500],[525,545]ch)

2016/02/05 07:20:45
Temp. :  -2.48 C   Humid. : 46.01 % (  2.34 hPa )   Solar :  0.00 kW/m2
Wind  :   0.12 m/s  158 deg   AirPressure : 571.58 hPa    ( Rain:  0.02 )
Opacity @220 GHz :   0.0920

Current time = 2016/02/05 07:20:41
Aspirin time = 2016/02/05 07:20:40
Weather time = 2016/02/05 07:20:39
Aspirin Offset : (Az, El) = (   4.56,  -1.38 )
Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
Refraction Corr. status : OK

07:46 I102-s2 (done)

az,el = -48 39
daz,del = +4.0 -1.0
Tsys: X3=398 X4=451
-> I102-s2.IRC+10216.20160205074554.6.Y
baseline subtraction:
  X3: 2nd-order polynomial function (fit ranges=[480,500],[525,545]ch)
  X4: 2nd-order polynomial function (fit ranges=[480,500],[525,545]ch)
-> I102-r2.IRC+10216.20160205071958.6.Y + I102-s2.IRC+10216.20160205074554.6.Y
map:
  all: blc=[+57,-57] pix  trc=[-57,+57] pix  vel=-48.0~-4.0 km/s
       dra=3.0 arcsec  ddec=3.0 arcsec  dvel=4.0 km/s

X3&ref(): File not found: "i1rsx3l5a_chmap.png" at page "Observing Log/2016-02-05"; X4&ref(): File not found: "i1rsx4l5a_chmap.png" at page "Observing Log/2016-02-05";
No line emission in X1 and X2. X4 and X5 are cross-correlation products.
Under investigation

Debugging by Maekawa-san

09:06 Tuning (jup-xc)
```
az,el = -52 49
```

09:09 jupzd3 (done)
```
az,el = -52 49
daz,del = +4.0 -1.0
-> CONT.jupzd3.aste16.linux16.201602050910.LCK
```
&ref(): File not found: "CONT.jupzd3.aste16.linux16.201602050910.png" at page "Observing Log/2016-02-05";

09:13 jpsbd3a

09:18 jpsbd3.list (batch)

az,el = -54
daz,del = +4.0 -1.0

2016/02/05 09:20:02
Temp. :  -4.48 C   Humid. : 64.14 % (  2.81 hPa )   Solar :  0.00 kW/m2
Wind  :   1.61 m/s  256 deg   AirPressure : 571.65 hPa    ( Rain:  0.02 )
Opacity @220 GHz :   0.0945

Current time = 2016/02/05 09:19:58
Aspirin time = 2016/02/05 09:19:57
Weather time = 2016/02/05 09:19:51
Aspirin Offset : (Az, El) = (   4.14,  -1.59 )
Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
Refraction Corr. status : OK

History of Observing Log/2016-02-05 (No. 1)

Linux COSMOS3 data†