[[Observing Log]]
----
#contents
----
*A16003 (Demo observation) [#x4d663e4]
** observer info [#s7bc41ff]
- izumi natsuko
***UTC0924 Pointing RAFGL5254 with 12CO(4-3) [#mc3bb766]
-Filename: R52p5B8
-Weather
ASTE Environment Monitor 2016/11/24 09:24:51
===================================ASTE Site===================================
Temp. : -4.51 C Humid. : 8.79 % ( 0.38 hPa ) Solar : 0.00 kW/m2
Wind : 9.09 m/s 241 deg AirPressure : 569.43 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0477
================================ Receiver Cabin ===============================
Main Cabin: 15.4 C Upper Cabin: 6.7 C AzTEC AE: 168.6 C Dewar: 168.6 C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 14.14 degC Humid. : 5.14 %
DBE(MAC): 16.9 degC 20.2 degC 21.8 degC 21.3 degC
DBE(WHSF): 18.0 degC 18.0 degC 18.0 degC 20.0 degC 20.0 degC 18.0 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 15.00 C 15.30 C 15.20 C 16.70 C 13.80 C 16.20 C
Internal Ret. 17.39 C 14.80 C 15.60 C 15.70 C 14.90 C 15.60 C
External 168.60 C -5.20 C -1.20 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 18.39 degC 16.00 degC -4.00 degC
Room Temp.: 14.60 degC
-Tuning
[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 455.254200720
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 455.254200720
vd0=0.650000, id0=5.000000
vd1=0.600000, id1=4.500000
vd2=0.600000, id2=4.500000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> GET_CLNA 0 1
0.654572,5.025940,-0.175064,0.603973,4.535217,-0.197617,0.604538,4.543762,-0.204239,1
> GET_CLNA 0 2
0.653854,5.040283,-0.195038,0.604340,4.561310,-0.195938,0.604034,4.550934,-0.202988,1
> GET_CLNA 1 1
0.654175,5.037384,-0.183044,0.604233,4.546509,-0.209946,0.604355,4.518890,-0.271744,1
> GET_CLNA 1 2
0.654236,5.017395,-0.170807,0.604675,4.554443,-0.193588,0.604385,4.512634,-0.200638,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set Electro-magnet ###
/cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 455.254200720
v=16.500000, 17.000000, 11.264282, 19.100000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> ACT_DEMAG 0 1 30.00 1.00 100
OK
> ACT_DEMAG 0 2 30.00 1.00 100
OK
> ACT_DEMAG 1 1 30.00 1.00 100
OK
> ACT_DEMAG 1 2 30.00 1.00 100
OK
> SET_MAG_C 0 1 16.50
OK
> SET_MAG_C 0 2 17.00
OK
> SET_MAG_C 1 1 11.26
OK
> SET_MAG_C 1 2 19.10
OK
> GET_MAG_VC 0 1
0.222107,16.030502
> GET_MAG_VC 0 2
0.217285,16.528702
> GET_MAG_VC 1 1
0.148270,10.679245
> GET_MAG_VC 1 2
0.260635,18.711090
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 455.254200720
455.254201 1.749000 1.749000 1.539036 1.650177
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.749
OK
> SET_SIS_V 0 2 1.749
OK
> SET_SIS_V 1 1 1.539
OK
> SET_SIS_V 1 2 1.650
OK
> GET_SIS_VC 0 1
1.608353,107.974243
> GET_SIS_VC 0 2
1.656342,95.886230
> GET_SIS_VC 1 1
1.457520,83.633423
> GET_SIS_VC 1 2
1.542892,700.064087
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 455.254200720
v=1.380000, -0.300000, 2.497458, -0.350000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_PA_VD 0 1.38
OK
> SET_PA_VG 0 -0.30
OK
> SET_PA_VD 1 2.50
OK
> SET_PA_VG 1 -0.35
OK
> GET_PA 0
2.234955,217.102051,-0.290833
> GET_PA 1
4.022827,241.333008,-0.345764
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
-
[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161124t092520z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t092520z open_mmc('mmc1:8501'): socket '4' connect success.
20161124t092520z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t092520z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161124t092521z mmc1 r reset_all.
mmc is active
20161124t092521z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161124t092523z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t092523z close_mmc(): socket '4' closed.
20161124t092523z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
-
[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
E/O att. = 12 dB E/O att. = 12 dB IF level=0.032006
new E/O att. = 12 dB IF level=0.031651
new E/O att. = 14 dB IF level=0.019778
new E/O att. = 12 dB IF level=0.033928
12 dB 0.033928 V
-
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
E/O att. = 13 dB IF level=0.068729
new E/O att. = 13 dB IF level=0.070220
new E/O att. = 14 dB IF level=0.052699
new E/O att. = 15 dB IF level=0.040961
new E/O att. = 14 dB IF level=0.058309
14 dB 0.058309 V
-
[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161124t092559z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t092559z open_mmc('mmc1:8501'): socket '4' connect success.
20161124t092559z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t092559z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161124t092559z mmc1 sky reset_all.
mmc is active
20161124t092559z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161124t092601z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t092601z close_mmc(): socket '4' closed.
20161124t092601z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
-
[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161124t092610z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t092610z open_mmc('mmc1:8501'): socket '8' connect success.
20161124t092610z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t092610z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161124t092611z mmc1 r reset_all.
mmc is active
20161124t092611z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161124t092613z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t092613z close_mmc(): socket '8' closed.
20161124t092613z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
E/O att. = 12 dB
E/O IF level = 0.032466 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161124t092616z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t092616z open_mmc('mmc1:8501'): socket '8' connect success.
20161124t092616z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t092616z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161124t092616z mmc1 sky reset_all.
mmc is active
20161124t092616z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161124t092619z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t092619z close_mmc(): socket '8' closed.
20161124t092619z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
E/O att. = 12 dB
E/O IF level = 0.023115 V
R=0.032466 V, Sky=0.023115 V, Y=1.475349 dB
1.475349
-
[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161124t092627z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t092627z open_mmc('mmc1:8501'): socket '8' connect success.
20161124t092627z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t092627z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161124t092627z mmc1 r reset_all.
mmc is active
20161124t092627z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161124t092629z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t092629z close_mmc(): socket '8' closed.
20161124t092629z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
E/O att. = 14 dB
E/O IF level = 0.055444 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161124t092633z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t092633z open_mmc('mmc1:8501'): socket '8' connect success.
20161124t092633z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t092633z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161124t092633z mmc1 sky reset_all.
mmc is active
20161124t092633z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161124t092635z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t092635z close_mmc(): socket '8' closed.
20161124t092635z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
E/O att. = 14 dB
E/O IF level = 0.035671 V
R=0.055444 V, Sky=0.035671 V, Y=1.915393 dB
1.915393
-Pointing
--Strange emission ?? (A1-A4: Pol0 USB)~
#ref(./RAFGL5254-12CO(4-3).png,30%)
***UTC0945 Change target => IRC10216 [#b766017b]
-Filename:IRCp5B8
-Pointing
--Strange... ? Bad baseline?? (A1-A4: Pol0 USB)~
#ref(./IRC10216-12CO(4-3).png,30%)
-Retry tuning
[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 455.315748084
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 455.315748084
vd0=0.650000, id0=5.000000
vd1=0.600000, id1=4.500000
vd2=0.600000, id2=4.500000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> GET_CLNA 0 1
0.654572,5.029144,-0.175201,0.604004,4.529114,-0.197662,0.604614,4.547729,-0.204453,1
> GET_CLNA 0 2
0.653748,5.039062,-0.195084,0.604309,4.558563,-0.195969,0.604034,4.553680,-0.202911,1
> GET_CLNA 1 1
0.654099,5.034485,-0.182770,0.604156,4.545593,-0.209763,0.604263,4.522858,-0.271454,1
> GET_CLNA 1 2
0.654190,5.016479,-0.170639,0.604736,4.552307,-0.193527,0.604416,4.511261,-0.200500,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set Electro-magnet ###
/cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 455.315748084
v=16.500000, 17.000000, 11.473543, 19.100000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> ACT_DEMAG 0 1 30.00 1.00 100
OK
> ACT_DEMAG 0 2 30.00 1.00 100
OK
> ACT_DEMAG 1 1 30.00 1.00 100
OK
> ACT_DEMAG 1 2 30.00 1.00 100
OK
> SET_MAG_C 0 1 16.50
OK
> SET_MAG_C 0 2 17.00
OK
> SET_MAG_C 1 1 11.47
OK
> SET_MAG_C 1 2 19.10
OK
> GET_MAG_VC 0 1
0.222504,16.032410
> GET_MAG_VC 0 2
0.217697,16.526031
> GET_MAG_VC 1 1
0.149811,10.882568
> GET_MAG_VC 1 2
0.260345,18.709946
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 455.315748084
455.315748 1.749000 1.749000 1.535897 1.638113
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.749
OK
> SET_SIS_V 0 2 1.749
OK
> SET_SIS_V 1 1 1.536
OK
> SET_SIS_V 1 2 1.638
OK
> GET_SIS_VC 0 1
1.647644,82.534790
> GET_SIS_VC 0 2
1.656113,100.433350
> GET_SIS_VC 1 1
1.452942,82.336426
> GET_SIS_VC 1 2
1.651154,744.439697
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 455.315748084
v=1.380000, -0.300000, 2.496843, -0.350000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_PA_VD 0 1.38
OK
> SET_PA_VG 0 -0.30
OK
> SET_PA_VD 1 2.50
OK
> SET_PA_VG 1 -0.35
OK
> GET_PA 0
2.234802,217.163086,-0.290680
> GET_PA 1
4.022217,240.295410,-0.346069
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
-
[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161124t100231z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t100231z open_mmc('mmc1:8501'): socket '4' connect success.
20161124t100231z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t100231z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161124t100231z mmc1 r reset_all.
mmc is active
20161124t100231z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161124t100233z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t100233z close_mmc(): socket '4' closed.
20161124t100233z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
-
[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
E/O att. = 12 dB E/O att. = 12 dB IF level=0.032444
new E/O att. = 12 dB IF level=0.032317
new E/O att. = 14 dB IF level=0.019912
new E/O att. = 12 dB IF level=0.035057
12 dB 0.035057 V
-
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
E/O att. = 14 dB IF level=0.050474
new E/O att. = 14 dB IF level=0.050677
new E/O att. = 15 dB IF level=0.037542
new E/O att. = 14 dB IF level=0.053583
14 dB 0.053583 V
-
[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161124t100301z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t100301z open_mmc('mmc1:8501'): socket '4' connect success.
20161124t100301z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t100301z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161124t100301z mmc1 sky reset_all.
mmc is active
20161124t100301z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161124t100303z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t100303z close_mmc(): socket '4' closed.
20161124t100303z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
-
[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161124t100309z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t100309z open_mmc('mmc1:8501'): socket '8' connect success.
20161124t100309z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t100309z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161124t100309z mmc1 r reset_all.
mmc is active
20161124t100309z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161124t100311z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t100311z close_mmc(): socket '8' closed.
20161124t100311z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
E/O att. = 12 dB
E/O IF level = 0.032676 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161124t100315z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t100315z open_mmc('mmc1:8501'): socket '8' connect success.
20161124t100315z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t100315z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161124t100315z mmc1 sky reset_all.
mmc is active
20161124t100315z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161124t100317z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t100317z close_mmc(): socket '8' closed.
20161124t100317z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
E/O att. = 12 dB
E/O IF level = 0.024548 V
R=0.032676 V, Sky=0.024548 V, Y=1.242128 dB
1.242128
-
[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161124t100334z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t100334z open_mmc('mmc1:8501'): socket '8' connect success.
20161124t100334z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t100334z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161124t100334z mmc1 r reset_all.
mmc is active
20161124t100334z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161124t100336z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t100336z close_mmc(): socket '8' closed.
20161124t100336z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
E/O att. = 14 dB
E/O IF level = 0.050822 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161124t100339z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t100339z open_mmc('mmc1:8501'): socket '8' connect success.
20161124t100339z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t100339z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161124t100340z mmc1 sky reset_all.
mmc is active
20161124t100340z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161124t100342z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t100342z close_mmc(): socket '8' closed.
20161124t100342z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
E/O att. = 14 dB
E/O IF level = 0.034116 V
R=0.050822 V, Sky=0.034116 V, Y=1.730936 dB
1.730936
-Pointing
--ddAz, ddEl = -1.8, 3.3
--Baseline is good (A1,A2: Pol0 USB, A3,A4: Pol1 USB)~
#ref(./IRC10216-12CO(4-3)-2.png,30%)
***UTC1034 Check pointing source RAFGL5245 [#fcce8451]
-Filename:R52p5B8
-Pointing
--Baseline is bad...? (A1,A2: Pol0 USB, A3,A4: Pol1 USB)~
#ref(./RAFGL5254-12CO(4-3)-2.png,30%)
***UTC1037 Standard source IRC+10216 with 12CO(4-3) [#mcf9fb43]
-Filename: IRCcpCO
-Weather
ASTE Environment Monitor 2016/11/24 10:38:18
===================================ASTE Site===================================
Temp. : -1.47 C Humid. : 5.00 % ( 0.27 hPa ) Solar : 0.21 kW/m2
Wind : 9.94 m/s 238 deg AirPressure : 570.00 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0311
================================ Receiver Cabin ===============================
Main Cabin: 15.7 C Upper Cabin: 8.1 C AzTEC AE: 168.6 C Dewar: 168.6 C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 15.47 degC Humid. : 4.47 %
DBE(MAC): 20.3 degC 27.7 degC 25.8 degC 23.3 degC
DBE(WHSF): 20.0 degC 20.0 degC 20.0 degC 21.0 degC 21.0 degC 20.0 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 17.50 C 16.10 C 16.39 C 17.30 C 13.70 C 17.70 C
Internal Ret. 19.30 C 15.90 C 16.50 C 7.00 C 16.00 C 16.70 C
External 168.60 C -0.50 C -0.50 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 19.70 degC 16.80 degC -0.50 degC
Room Temp.: 16.39 degC
-Observation
--Detect emission from IRC+10216 (A1,A2: Pol0 USB, A3,A4: Pol1 USB)~
#ref(./IRC10216-12CO(4-3)-cp.png,50%)
***UTC1041 Standard source IRC+10216 with CI [#w9d91d36]
-Filename: IRCcpCI
-Weather
ASTE Environment Monitor 2016/11/24 10:41:45
===================================ASTE Site===================================
Temp. : -1.30 C Humid. : 4.67 % ( 0.26 hPa ) Solar : 0.24 kW/m2
Wind : 10.92 m/s 246 deg AirPressure : 570.02 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0512
================================ Receiver Cabin ===============================
Main Cabin: --- C Upper Cabin: --- C AzTEC AE: --- C Dewar: --- C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 15.73 degC Humid. : 4.38 %
DBE(MAC): 20.6 degC 28.1 degC 25.9 degC 23.6 degC
DBE(WHSF): 20.0 degC 20.0 degC 20.0 degC 21.0 degC 21.0 degC 20.0 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 17.70 C 17.00 C 17.10 C 18.30 C -8.80 C 17.60 C
Internal Ret. 19.70 C 16.60 C 17.00 C -2.80 C 16.50 C 16.70 C
External 168.60 C -0.30 C 0.90 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 19.30 degC 15.50 degC -1.10 degC
Room Temp.: 16.50 degC
-Tuning
[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 486.440570556
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 486.440570556
vd0=0.650000, id0=5.000000
vd1=0.600000, id1=4.500000
vd2=0.600000, id2=4.500000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> GET_CLNA 0 1
0.654572,5.024261,-0.175323,0.603928,4.531250,-0.198029,0.604645,4.546204,-0.204636,1
> GET_CLNA 0 2
0.653839,5.040894,-0.195282,0.604431,4.557800,-0.196091,0.604019,4.552002,-0.203094,1
> GET_CLNA 1 1
0.654129,5.035858,-0.182816,0.604294,4.552307,-0.209854,0.604279,4.523010,-0.271637,1
> GET_CLNA 1 2
0.654114,5.019226,-0.170761,0.604736,4.554291,-0.193604,0.604416,4.511566,-0.200745,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set Electro-magnet ###
/cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 486.440570556
v=17.500000, 21.500000, 13.800000, 19.100000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> ACT_DEMAG 0 1 30.00 1.00 100
OK
> ACT_DEMAG 0 2 30.00 1.00 100
OK
> ACT_DEMAG 1 1 30.00 1.00 100
OK
> ACT_DEMAG 1 2 30.00 1.00 100
OK
> SET_MAG_C 0 1 17.50
OK
> SET_MAG_C 0 2 21.50
OK
> SET_MAG_C 1 1 13.80
OK
> SET_MAG_C 1 2 19.10
OK
> GET_MAG_VC 0 1
0.234833,17.015076
> GET_MAG_VC 0 2
0.275040,21.017456
> GET_MAG_VC 1 1
0.182465,13.214493
> GET_MAG_VC 1 2
0.262558,18.712234
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 486.440570556
486.440571 1.883968 1.858574 1.896000 1.849000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.884
OK
> SET_SIS_V 0 2 1.859
OK
> SET_SIS_V 1 1 1.896
OK
> SET_SIS_V 1 2 1.849
OK
> GET_SIS_VC 0 1
1.780930,60.494995
> GET_SIS_VC 0 2
1.766052,90.301514
> GET_SIS_VC 1 1
1.804886,89.096069
> GET_SIS_VC 1 2
1.773605,768.490601
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 486.440570556
v=1.436957, -0.300000, 2.347480, -0.350000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_PA_VD 0 1.44
OK
> SET_PA_VG 0 -0.30
OK
> SET_PA_VD 1 2.35
OK
> SET_PA_VG 1 -0.35
OK
> GET_PA 0
2.329254,205.184937,-0.290985
> GET_PA 1
3.772583,226.287842,-0.345764
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
-
[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161124t104400z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t104400z open_mmc('mmc1:8501'): socket '4' connect success.
20161124t104400z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t104400z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161124t104400z mmc1 r reset_all.
mmc is active
20161124t104400z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161124t104402z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t104402z close_mmc(): socket '4' closed.
20161124t104402z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
-
[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
E/O att. = 12 dB E/O att. = 12 dB IF level=0.023060
new E/O att. = 12 dB IF level=0.023127
new E/O att. = 10 dB IF level=0.037303
new E/O att. = 12 dB IF level=0.020808
12 dB 0.020808 V
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
E/O att. = 14 dB IF level=0.033566
new E/O att. = 14 dB IF level=0.033486
new E/O att. = 13 dB IF level=0.043553
new E/O att. = 12 dB IF level=0.057140
new E/O att. = 13 dB IF level=0.038565
13 dB 0.038565 V
-
[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161124t104429z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t104429z open_mmc('mmc1:8501'): socket '4' connect success.
20161124t104429z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t104429z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161124t104429z mmc1 sky reset_all.
mmc is active
20161124t104429z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161124t104432z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t104432z close_mmc(): socket '4' closed.
20161124t104432z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
-
[asteobs@aste-1c ~]$ yfactor 1
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161124t104440z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t104440z open_mmc('mmc1:8501'): socket '8' connect success.
20161124t104440z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t104440z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161124t104440z mmc1 r reset_all.
mmc is active
20161124t104440z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161124t104442z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t104442z close_mmc(): socket '8' closed.
20161124t104442z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
E/O att. = 12 dB
E/O IF level = 0.023073 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161124t104446z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t104446z open_mmc('mmc1:8501'): socket '8' connect success.
20161124t104446z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t104446z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161124t104446z mmc1 sky reset_all.
mmc is active
20161124t104446z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161124t104448z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t104448z close_mmc(): socket '8' closed.
20161124t104448z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 1
E/O att. = 12 dB
E/O IF level = 0.017642 V
R=0.023073 V, Sky=0.017642 V, Y=1.165562 dB
1.165562
-
[asteobs@aste-1c ~]$ yfactor 2
Execute /cosmos3/naoj/bin/mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_r start.
seq_r end.
20161124t104455z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t104455z open_mmc('mmc1:8501'): socket '8' connect success.
20161124t104455z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t104455z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161124t104455z mmc1 r reset_all.
mmc is active
20161124t104455z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
20161124t104457z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t104457z close_mmc(): socket '8' closed.
20161124t104457z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
E/O att. = 13 dB
E/O IF level = 0.043348 V
Execute /cosmos3/naoj/bin/mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
seq_sky start.
seq_sky end.
20161124t104500z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161124t104500z open_mmc('mmc1:8501'): socket '8' connect success.
20161124t104500z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161124t104500z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
cmd_reset_all()
20161124t104501z mmc1 sky reset_all.
mmc is active
20161124t104501z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
20161124t104503z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161124t104503z close_mmc(): socket '8' closed.
20161124t104503z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
Execute /cosmos3/naoj/bin/ifeo 2
E/O att. = 13 dB
E/O IF level = 0.034691 V
R=0.043348 V, Sky=0.034691 V, Y=0.967522 dB
0.967522
-Observation
--Could not detect emission from IRC+10216 (A1,A2: Pol0 USB, A3,A4: Pol1 USB)~
#ref(./IRC10216-CI-cp.png,50%)
***UTC1049 OTF mapping RCW38 Yscan [#mc428af0]
-Filename:R38otfY
-Weather
ASTE Environment Monitor 2016/11/24 10:50:14
===================================ASTE Site===================================
Temp. : -0.80 C Humid. : 4.53 % ( 0.26 hPa ) Solar : 0.27 kW/m2
Wind : 9.48 m/s 249 deg AirPressure : 570.12 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0659
================================ Receiver Cabin ===============================
Main Cabin: 16.2 C Upper Cabin: 8.1 C AzTEC AE: 168.6 C Dewar: 168.6 C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 15.35 degC Humid. : 4.43 %
DBE(MAC): 20.4 degC 27.6 degC 25.6 degC 23.2 degC
DBE(WHSF): 20.0 degC 20.0 degC 20.0 degC 21.0 degC 21.0 degC 20.0 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 17.80 C 7.90 C 15.60 C 16.89 C 1.60 C 17.60 C
Internal Ret. 19.30 C 15.50 C 15.70 C -4.80 C 15.80 C 16.89 C
External 168.60 C 2.90 C 1.00 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 20.00 degC 15.20 degC 2.29 degC
Room Temp.: 17.10 degC
-Observation
--Detect emission from RCW38 (A1,A2: Pol0 USB, A3,A4: Pol1 USB)~
&ref(./RCW38-CI.png,50%);&ref(./RCW38-CI-2.png,50%);
--Sometimes, base line was very bad... (A1,A2: Pol0 USB, A3,A4: Pol1 USB)~
#ref(./RCW38-CI-bad_baseline.png,50%)
***UTC1141 Finish observation [#t8e9747f]
-Weather
ASTE Environment Monitor 2016/11/24 12:00:56
===================================ASTE Site===================================
Temp. : 2.09 C Humid. : 4.04 % ( 0.29 hPa ) Solar : 0.58 kW/m2
Wind : 11.34 m/s 249 deg AirPressure : 570.51 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0282
================================ Receiver Cabin ===============================
Main Cabin: --- C Upper Cabin: --- C AzTEC AE: --- C Dewar: --- C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 15.46 degC Humid. : 4.29 %
DBE(MAC): 20.5 degC 27.5 degC 25.7 degC 23.2 degC
DBE(WHSF): 20.0 degC 20.0 degC 21.0 degC 22.0 degC 21.0 degC 20.0 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 18.60 C 11.60 C 16.00 C 17.39 C 4.40 C 18.70 C
Internal Ret. 19.70 C 15.80 C 16.00 C -3.90 C 16.10 C 18.10 C
External 168.60 C 5.80 C 4.40 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 20.39 degC 17.50 degC 4.80 degC
Room Temp.: 17.89 degC
***Autolog [#g7e0fe0e]
-Obslog
#ref(./ASTE_obslog_20161124092733)
-Pointlog
#ref(./ASTE_pointlog_20161124093647.txt)
#ref(./ASTE_pointlog_20161124093647)
![[PukiWiki]](http://www2.nao.ac.jp/~aste-www/aste_wiki/obs.jpg "[PukiWiki]")
