Diff of Observing Log/2016-09-21

• The added line is THIS COLOR.
• The deleted line is THIS COLOR.
• Observing Log/2016-09-21 has been deleted.
• Deleting diff of Observing Log/2016-09-21

[[Observing Log]]
----
#contents
----

* CSV2016: Remaining works (2016-09-21) [#h0b0bc42]

** Tasks [#c8b2c3c0]
- Test observations using WHSF

*** Preparations [#f196b634]
+ Tuning at EL=60.0 deg
-- [[Tuning of DASH345/BAND8 for continuum observations>CSV/2016#i6322df7]]
-- Don't forget to record weather conditions

----

** Information [#i0a9d2b8]
- Observers: Kamazaki
- Site: Mitaka
- Weather conditions (2016-09-20UT23:39)
 Temperature: -0.4 C
 Humidity: 1.2 hPa
 Wind: 5.2 m/s (210 deg)
 220GHz opacity: 0.13

** WHSF tests [#a4350ed1]
*** Precheck [#c1b596e5]
- Binaries of ffxexe and ffxotf
 [astecntl@aste-1c ffxOFF]$ pwd
 /cosmos3/aste/sbin/ffxOFF
 [astecntl@aste-1c ffxOFF]$ ls -l ffx*
 -rwxr-xr-x 1 develop astmng  20278 Sep 17 10:46 ffxexe*
 -rwxr-xr-x 1 develop astmng  20374 Aug  9 01:39 ffxexe.20160917*
 -rwxr-xr-x 1 develop astmng  20278 Sep 17 10:46 ffxexe.ModTPD*
 -rwxr-xr-x 1 develop astmng  45808 Sep 17 10:46 ffxotf*
 -rwxr-xr-x 1 develop astmng  49648 Aug  9 01:39 ffxotf.20160917*
 -rwxr-xr-x 1 develop astmng  45808 Sep 17 10:46 ffxotf.ModTPD*
 [astecntl@aste-1c bin]$ pwd
 /home/asteffx/bin
 [astecntl@aste-1c bin]$ ls -l if_tpd_mon*
 lrwxrwxrwx 1 asteffx astctl    16 Sep 19 21:32 if_tpd_mon -> if_tpd_mon_noTPD*
 -rwxr-xr-x 1 asteffx astctl 10888 Dec 15  2009 if_tpd_mon.org*
 -rwxr-xr-x 1 asteffx astctl 12489 Sep 16 17:09 if_tpd_mon_noTPD*

*** Tuning DASH345 [#ja1ff008]
- Tuned BAND8, but its R-Sky was terrible and gave up to try BAND8.
- UT23:37 aste16/linux16/tEPC3p3.tune
 az,el = -180 60
-
 [asteobs@aste-1c ~]$ asterx_set DASH345
 ### Query of LO Freq ###
 LO Freq = 350.947732944
 ### Set CLNA ###
 /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 350.947732944
 vd0=1.200000, id0=10.000000
 vd1=0.000000, id1=0.000000
 vd2=0.000000, id2=0.000000
 ASTE FEMC:OPEN
 FEMC_TCP 7 
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 ---------- 45 4C 01 08 00 E1nd at Node index 00
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > GET_CLNA 0 1 
 1.205078,10.070953,-0.279114,0.003342,0.012512,4.910141,0.003632,0.023804,4.910004,1
 > GET_CLNA 0 2 
 1.204910,10.052338,-0.382462,0.003159,0.022430,-4.848251,0.004120,0.021515,4.910065,1
 > GET_CLNA 1 1 
 1.205994,10.051117,-0.796478,0.003189,0.021362,-4.882019,0.003204,0.024414,-4.881958,1
 > GET_CLNA 1 2 
 1.206558,10.090942,-0.301941,0.003723,0.018311,-4.881989,0.003525,0.013885,4.931534,1
 > CAN_CLOSE
 CAN closed
 ASTE FEMC:CLOSE
 ### Set SIS bias ###
 /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 350.947732944
 350.947733 1.900000 1.900000 1.900000 1.900000
 ASTE FEMC:OPEN
 FEMC_TCP 7 
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 ---------- 45 4C 01 08 00 E1nd at Node index 00
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_SIS_MODE 0 
 SET SIS MODE:CLOSE LOOP
 > SET_SIS_V 0 1 1.900 
 OK
 > SET_SIS_V 0 2 1.900 
 OK
 > SET_SIS_V 1 1 1.900 
 OK
 > SET_SIS_V 1 2 1.900 
 OK
 > GET_SIS_VC 0 1 
 1.786957,87.982178
 > GET_SIS_VC 0 2 
 1.789474,65.155029
 > GET_SIS_VC 1 1 
 1.811829,37.948608
 > GET_SIS_VC 1 2 
 1.819687,35.208130
 > CAN_CLOSE
 CAN closed
 ASTE FEMC:CLOSE
 ### Set LO Power ###
 /cosmos3/naoj/bin/loatt_dash345_tune 350.947732944
 /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 350.947732944
 /cosmos3/naoj/bin/loatt_dash345 307 287
 Set ATT     : Pol0=307, Pol1=287
  Pol0 =      307   , Pol1 =      287
  Pol0 = 0.007493[A], Pol1 = 0.007005[A]
  Pol0 = 0.675978[V], Pol1 = 0.772063[V]
-
 [asteobs@aste-1c ~]$ whsf_tune S1USB S1LSB S2USB S2LSB
	***Set ATT***
	S1USB:ATT_old = 18.75 [dB]
	S1USB:ATT_new = 18.75 [dB]
	S1LSB:ATT_old = 17.25 [dB]
	S1LSB:ATT_new = 17.25 [dB]
	S2USB:ATT_old = 16.75 [dB]
	S2USB:ATT_new = 16.75 [dB]
	S2LSB:ATT_old = 17.75 [dB]
	S2LSB:ATT_new = 17.75 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	58.81	60.31	61.00	63.03	89.80	76.73	83.27	92.25	[mV]
-
 [asteobs@aste-1c ~]$ whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2
	***Set ATT***
	S1IFA:ATT_old = 6.75 [dB]
	S1IFA:ATT_new = 6.75 [dB]
	S1IFB:ATT_old = 5.50 [dB]
	S1IFB:ATT_new = 5.25 [dB]
	S2IFA:ATT_old = 6.75 [dB]
	S2IFA:ATT_new = 6.75 [dB]
	S2IFB:ATT_old = 7.25 [dB]
	S2IFB:ATT_new = 7.25 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	58.66	60.10	60.94	63.14	89.35	90.22	89.45	92.48	[mV]
-
 [asteobs@aste-1c ~]$ whsf_rsky
	Result: R-SKY
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	2.216	2.469	1.854	2.481	2.302	2.380	1.932	2.545	[dB]
 
	Result: Tsys[Tamb=293K]
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	440.1	382.6	550.4	380.2	419.3	401.5	523.0	367.7	[K]

*** Pointing [#mb4f5501]
- UT23:45 aste16/linux16/tEPC3p3.start
 az,el = 66 48
 daz,del = +3.0 +3.0 -> +1.0 +2.0
 Tsys X[1-4] = 485.0 615.6 463.0 418.8

*** M17 center + offset [#yb8edd1b]
- UT23:59 aste16/linux16/tM7C3c3.start
 az,el = -69 73
 daz,del = +1.0 +2.0
 Tsys X[1-4] = 359.3 480.2 371.6 325.2
- UT00:14 stopped by hand to modify tM7C3c3.start

- UT00:27 aste16/linux16/tM7C3c3.start
 az,el = -77 66
 daz,del = +1.0 +2.0
 Tsys X[1-4] = 397.1 514.5 395.6 355.2

- UT00:55 stopped by hand at the integration counter of 50

*** Pointing [#dee2f8ba]
- UT00:55 aste16/linux16/tEPC3p3.start
 az,el = +46 62
 daz,del = +1.0 +2.0 -> +1.0 +2.0
 Tsys X[1-4] = 470.9 578.9 439.6 417.7

*** M17SW OTF [#j9e6a340]
- UT01:06 aste16/linux16/tM7C3r3.start
 az,el = -84 57
 daz,del = +1.0 +2.0
 Tsys X[1-4] = 448.9 656.0 492.8 372.8
-
 2016/09/21 01:07:13
  Temp. :  -1.84 C   Humid. : 23.56 % (  1.26 hPa )   Solar :  0.00 kW/m2
  Wind  :   8.17 m/s  182 deg   AirPressure : 572.82 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.1631
-
 Current time = 2016/09/21 01:07:15
 Aspirin time = 2016/09/21 01:07:15
 Weather time = 2016/09/21 01:07:05
 Aspirin Offset : (Az, El) = (  -0.22,  -9.64 )
 Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
 Refraction Corr. status : OK

- UT01:40 aste16/linux16/tM7C3s3.start
 az,el = -90 45
 daz,del = +1.0 +2.0
 Tsys X[1-4] = 549.5 718.5 535.8 468.6

*** Tuning DASH345 [#a9c352c4]
- UT02:38 aste16/linux16/tOCC3p2.tune
 az,el = 80 60
-
 [asteobs@aste-1c ~]$ asterx_set DASH345
 ### Query of LO Freq ###
 LO Freq = 340.629350712
 ### Set CLNA ###
 /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 340.629350712
 vd0=1.200000, id0=10.000000
 vd1=0.000000, id1=0.000000
 vd2=0.000000, id2=0.000000
 ASTE FEMC:OPEN
 FEMC_TCP 7 
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 ---------- 45 4C 01 08 00 E1nd at Node index 00
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > GET_CLNA 0 1 
 1.205109,10.060120,-0.279404,0.003220,0.013885,4.910278,0.003601,0.022583,4.910187,1
 > GET_CLNA 0 2 
 1.204941,10.055695,-0.382782,0.003204,0.023499,-4.848282,0.004105,0.021057,4.910156,1
 > GET_CLNA 1 1 
 1.205917,10.039978,-0.796600,0.003082,0.021362,-4.882065,0.003235,0.024567,-4.882111,1
 > GET_CLNA 1 2 
 1.206696,10.095520,-0.302612,0.003693,0.018768,-4.882141,0.003403,0.013733,4.931564,1
 > CAN_CLOSE
 CAN closed
 ASTE FEMC:CLOSE
 ### Set SIS bias ###
 /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 340.629350712
 340.629351 1.900000 1.900000 1.900000 1.900000
 ASTE FEMC:OPEN
 FEMC_TCP 7 
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 ---------- 45 4C 01 08 00 E1nd at Node index 00
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_SIS_MODE 0 
 SET SIS MODE:CLOSE LOOP
 > SET_SIS_V 0 1 1.900 
 OK
 > SET_SIS_V 0 2 1.900 
 OK
 > SET_SIS_V 1 1 1.900 
 OK
 > SET_SIS_V 1 2 1.900 
 OK
 > GET_SIS_VC 0 1 
 1.785965,22.799683
 > GET_SIS_VC 0 2 
 1.787491,15.081787
 > GET_SIS_VC 1 1 
 1.811829,14.202881
 > GET_SIS_VC 1 2 
 1.818619,14.334106
 > CAN_CLOSE
 CAN closed
 ASTE FEMC:CLOSE
 ### Set LO Power ###
 /cosmos3/naoj/bin/loatt_dash345_tune 340.629350712
 /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 340.629350712
 /cosmos3/naoj/bin/loatt_dash345 278 280
 Set ATT     : Pol0=278, Pol1=280
  Pol0 =      278   , Pol1 =      280
  Pol0 = 0.006784[A], Pol1 = 0.006834[A]
  Pol0 = 0.668394[V], Pol1 = 0.769619[V]
-  
 [asteobs@aste-1c ~]$ whsf_tune S1USB S1LSB S2USB S2LSB
	***Set ATT***
	S1USB:ATT_old = 19.25 [dB]
	S1USB:ATT_new = 19.25 [dB]
	S1LSB:ATT_old = 16.25 [dB]
	S1LSB:ATT_new = 16.25 [dB]
	S2USB:ATT_old = 15.75 [dB]
	S2USB:ATT_new = 15.75 [dB]
	S2LSB:ATT_old = 18.00 [dB]
	S2LSB:ATT_new = 18.25 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	60.40	60.97	62.86	61.25	104.17	57.34	71.36	83.26	[mV]
-
 [asteobs@aste-1c ~]$ whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2
	***Set ATT***
	S1IFA:ATT_old = 7.25 [dB]
	S1IFA:ATT_new = 7.25 [dB]
	S1IFB:ATT_old = 5.25 [dB]
	S1IFB:ATT_new = 5.25 [dB]
	S2IFA:ATT_old = 6.75 [dB]
	S2IFA:ATT_new = 6.75 [dB]
	S2IFB:ATT_old = 7.00 [dB]
	S2IFB:ATT_new = 7.00 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	60.35	60.60	62.39	60.98	92.75	89.45	91.85	87.75	[mV]
-
 [asteobs@aste-1c ~]$ whsf_rsky
	Result: R-SKY
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	1.313	1.817	1.867	1.255	1.098	1.823	1.841	1.183	[dB]
 
	Result: Tsys[Tamb=293K]
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	829.8	564.1	545.6	874.2	1018.3	561.6	554.9	936.0	[K]

*** Pointing [#u3271646]
- UT03:13 aste16/linux16/tOCC3p2.start
 az,el = 78 34
 daz,del = +1.0 +2.0 -> +1.0 +2.0 (no update)
 Tsys X[1-4] = 1140.3 882.4 912.1 1231.4

- UT04:29 aste16/linux16/tOCC3p2.start
 az,el = 123 51
 daz,del = +1.0 +2.0 -> +2.0 +3.0
 Tsys X[1-4] = 904.7 634.4 638.4 903.3
-
 2016/09/21 04:35:50
  Temp. :  -3.94 C   Humid. : 26.50 % (  1.21 hPa )   Solar :  0.00 kW/m2
  Wind  :   1.80 m/s  259 deg   AirPressure : 572.53 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.1823
-
 Current time = 2016/09/21 04:35:51
 Aspirin time = 2016/09/21 04:35:49
 Weather time = 2016/09/21 04:35:44
 Aspirin Offset : (Az, El) = ( -10.21,  -2.51 )
 Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
 Refraction Corr. status : OK

- UT04:39 START TUNING for spurious signals in X1
-- Spurious signals still persists in X1.

*** O Cet OTF [#afa1bf25]
- UT04:40 aste16/linux16/tOCC3r2.start
 az,el = +62 53
 daz,del = +2.0 +3.0
 Tsys X[1-4] = 811.6 616.0 625.7 859.0

** Investigation of DASH345-P0 [#pfa3fac1]
- [[ASTE-134>http://alma-comp.mtk.nao.ac.jp:8080/jira/browse/ASTE-134]]