[[Observing Log]]
----
#contents
----

* CSV2016: Radio pointing offsets of DASH345/BAND8 (2016-09-15) [#n5333cf2]

** Tasks [#oc93a5e2]
- 220GHz opacity <= 0.07 -> Radio pointing offsets in BAND8
- 220GHz opacity > 0.07 -> Radio pointing offsets in DASH345

*** Preparations [#v77b981d]
+ Basic checks
-- Record which kisa files are used for DASH345 and BAND8
+
 aste16@aste-ms1: ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
 -rw-r--r-- 1 astecntl astctl 771 Sep 10 09:38 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.160910
 -rw-r--r-- 1 astecntl astctl 769 Sep 10 09:32 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.160910
-- Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
-- Check Aspirin is working in the "WIND" mode
+ Tuning at EL=60.0 deg
-- [[Tuning of DASH345/BAND8 for continuum observations>CSV/2016#i6322df7]]
-- Don't forget to record weather conditions
*** Radio pointing offsets of DASH345/BAND8 [#ib76cbf4]
- Its instruction is [[HERE>CSV/RadioPointingMeasurementSBRx]]
+ Repeat cross scans toward Saturn and shots of a star one after the other
+ Data reduction
-- Still under preparation

----

** Information [#b61215cf]
- Observers: Kamazaki
- Site: Mitaka
- Weather conditions (2016-09-14UT23:32)
 Temperature: -0.4 C
 Humidity: 1.03 hPa
 Wind: 11.4 m/s (258 deg)
 220GHz opacity: 0.062

** Radio pointing offsets in BAND8 [#ge563ea5]
- 220GHz opacity ~ 0.07

*** KISA files [#qf1cd2a3]
 [asteobs@aste-mt1 ~]$ ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
 lrwxrwxrwx 1 astecntl astctl 12 Sep 13 08:23 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.160910
 lrwxrwxrwx 1 astecntl astctl 12 Sep 13 08:11 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.160910

*** OPT check [#b9ddfc08]
- Initialization -> ok
 [aste16@aste-ms1 ~]$ ~/analysis/bin/optinit.sh 
 device:    [ ok ]
 mmap:      [ ok ]
 init bcr:  [ ok ]
 init:      [ ok ]
 initLUT:   [ ok ]
 clear FB:  [ ok ]
 AVME-338B -> successfully initialized
- Star image -> ok
 [aste16@aste-ms1 ~]$ ~/analysis/bin/optshot.sh r  1  128
 * image plane = r -> offset=0
 * # of frames = 1 
 * frame capture delay = 1 (sec)
 * fov = blc(192, 192) - trc(319, 319)
 001 [2016-09-14T23:17:14]: max,min,mean,sdev =  86  28 61.181 7.099
 -rw-r--r-- 1 aste16 astgrp 16384 Sep 14 23:17 /var/tmp/opt_aste16.raw

*** Tuning [#gb597041]
- BAND8
 [asteobs@aste-1c ~]$ swbox_ctl_be CONT
 [asteobs@aste-1c ~]$ swbox_ctl_be     
 status: swbox_ctl_be CONT
-- My log file was deleted by mistake...

*** Radio pointing offsets in BAND8 [#z3a94d79]
- UT23:23 Pointing (aste16/radpon/istx5b8.start)
 az,el = -90 64
 daz,del = 0.0 +7.0 -> -1.0 +6.0
 dx,dy,dz,dtx,dty,dtz = all 0.0s

- UT23:31 aste16/radpon/istb8.list
 az,el = -90 62
 daz,del = -1.0 +6.0
-
 2016/09/14 23:32:09
  Temp. :  -0.38 C   Humid. : 17.28 % (  1.03 hPa )   Solar :  0.00 kW/m2
  Wind  :  11.35 m/s  258 deg   AirPressure : 573.39 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0617
-
 Current time = 2016/09/14 23:32:11
 Aspirin time = 2016/09/14 23:32:09
 Weather time = 2016/09/14 23:32:06
 Aspirin Offset : (Az, El) = (   4.53,  -8.93 )
 Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
 Refraction Corr. status : OK

- UT00:45
 az,el = -96 45
 daz,del = -1.0 +6.0
-
 2016/09/15 00:44:54
  Temp. :  -2.73 C   Humid. : 23.49 % (  1.17 hPa )   Solar :  0.00 kW/m2
  Wind  :   7.66 m/s  270 deg   AirPressure : 573.78 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0820
  Room Temp.:    18.50 degC
-
 Current time = 2016/09/15 00:44:57
 Aspirin time = 2016/09/15 00:44:56
 Weather time = 2016/09/15 00:44:54
 Aspirin Offset : (Az, El) = (   4.36,  -5.14 )
 Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
 Refraction Corr. status : OK

- UT01:56
 az,el = -101 29
 daz,del = -1.0 +6.0
-
 2016/09/15 01:56:28
  Temp. :  -3.14 C   Humid. : 13.04 % (  0.63 hPa )   Solar :  0.00 kW/m2
  Wind  :   9.10 m/s  265 deg   AirPressure : 574.04 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0526
-
 Current time = 2016/09/15 01:56:29
 Aspirin time = 2016/09/15 01:56:27
 Weather time = 2016/09/15 01:56:26
 Aspirin Offset : (Az, El) = (   2.65,  -6.41 )
 Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
 Refraction Corr. status : OK

- UT02:27 stopped by hand
 az,el = -103 22
 daz,del = -1.0 6.0
-
 2016/09/15 02:28:29
  Temp. :  -2.35 C   Humid. : 11.39 % (  0.59 hPa )   Solar :  0.00 kW/m2
  Wind  :   9.18 m/s  267 deg   AirPressure : 573.92 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0485
-
 Current time = 2016/09/15 02:28:31
 Aspirin time = 2016/09/15 02:28:30
 Weather time = 2016/09/15 02:28:18
 Aspirin Offset : (Az, El) = (   1.96,  -3.89 )
 Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
 Refraction Corr. status : OK

** Digital backend testing [#a15a2cfb]
*** MAC [#tb1a24a0]
- Tuning (aste16/linux16/OCTC3ph.tune)
 [asteobs@aste-1c ~]$ asterx_set DASH345
 ### Query of LO Freq ###
 LO Freq = 339.951875256
 ### Set CLNA ###
 /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 339.951875256
 vd0=1.200000, id0=10.000000
 vd1=0.000000, id1=0.000000
 vd2=0.000000, id2=0.000000
 ASTE FEMC:OPEN
 FEMC_TCP 7 
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 ---------- 45 4C 01 08 00 E1nd at Node index 00
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > GET_CLNA 0 1 
 1.205017,10.064392,-0.278305,0.003342,0.013123,4.910400,0.003662,0.023346,4.910492,1
 > GET_CLNA 0 2 
 1.204849,10.049744,-0.381943,0.003189,0.023956,-4.848602,0.004059,0.021362,4.910446,1
 > GET_CLNA 1 1 
 1.205765,10.035706,-0.795914,0.003204,0.022583,-4.882126,0.003265,0.024261,-4.882217,1
 > GET_CLNA 1 2 
 1.206802,10.089111,-0.301239,0.003708,0.019226,-4.882187,0.003525,0.013580,4.931763,1
 > CAN_CLOSE
 CAN closed
 ASTE FEMC:CLOSE
 ### Set SIS bias ###
 /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 339.951875256
 339.951875 1.900000 1.900000 1.900000 1.900000
 ASTE FEMC:OPEN
 FEMC_TCP 7 
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 ---------- 45 4C 01 08 00 E1nd at Node index 00
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_SIS_MODE 0 
 SET SIS MODE:CLOSE LOOP
 > SET_SIS_V 0 1 1.900 
 OK
 > SET_SIS_V 0 2 1.900 
 OK
 > SET_SIS_V 1 1 1.900 
 OK
 > SET_SIS_V 1 2 1.900 
 OK
 > GET_SIS_VC 0 1 
 1.782761,21.844482
 > GET_SIS_VC 0 2 
 1.784821,14.331055
 > GET_SIS_VC 1 1 
 1.809235,19.696045
 > GET_SIS_VC 1 2 
 1.814575,17.977905
 > CAN_CLOSE
 CAN closed
 ASTE FEMC:CLOSE
 ### Set LO Power ###
 /cosmos3/naoj/bin/loatt_dash345_tune 339.951875256
 /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 339.951875256
 /cosmos3/naoj/bin/loatt_dash345 277 285
 Set ATT     : Pol0=277, Pol1=285
  Pol0 =      277   , Pol1 =      285
  Pol0 = 0.006761[A], Pol1 = 0.006957[A]
  Pol0 = 0.670717[V], Pol1 = 0.772410[V]
-
 [asteobs@aste-1c ~]$ mmc1_rstop
 [asteobs@aste-1c ~]$ ifeo_tune 1 0.030
 14 dB  0.020857 V
 [asteobs@aste-1c ~]$ ifeo_tune 2 0.050
 14 dB  0.042985 V
-
 [asteobs@aste-1c ~]$ mmc1_sstop
 [asteobs@aste-1c ~]$ yfactor 1
 R=0.022915 V,  Sky=0.015072 V, Y=1.819490 dB
 1.819490
 [asteobs@aste-1c ~]$ yfactor 2
 R=0.045467 V,  Sky=0.019654 V, Y=3.642453 dB
 3.642453

- UT03:43 Pointing (aste16/linux16/OCTC3ph.start)
 az,el = 77 36
 daz,del = -1.0 +6.0 -> +1.0 +8.0
 Tsys A[1,3] = 581.8 283.4
 - In A1, baseline levels varied every scan and were unstable.
 - Just ignored A1 and A2.

- UT03:47 aste16/linux16/M17C3ch.start
 az,el = -97 25
 daz,del = +1.0 -8.0
 Tsys A[1,3] = 443 331

- UT03:55 Tuning (aste16/linux16/M17C3cw.tune)
 az,el = -98 24
-
 [asteobs@aste-1c ~]$ mmc1_rstop
 [asteobs@aste-1c ~]$ ifeo_tune 1 0.030
 12 dB  0.036639 V
 [asteobs@aste-1c ~]$ ifeo_tune 2 0.050
 14 dB  0.042589 V
-
 [asteobs@aste-1c ~]$ mmc1_sstop
 [asteobs@aste-1c ~]$ yfactor 1
 R=0.034154 V,  Sky=0.023284 V, Y=1.663840 dB
 1.663840
 [asteobs@aste-1c ~]$ yfactor 2
 R=0.044954 V,  Sky=0.023085 V, Y=2.894385 dB
 2.894385

- UT03:58 aste16/linux16/M17C3cw.start
 az,el = -98 22
 Tsys A[1,3] = 489 334

- UT04:07 Tuning (aste16/linux16/OCTC3p2.tune)
 az,el = +73 40

- UT04:12 Pointing (aste16/linux16/OCTC3p2.start)
 az,el = +73 42
 daz,del = +1.0 +8.0 -> +1.0 +9.0
 Tsys : not available on qlookl due to the TPD issue
-
 2016/09/15 04:19:54
  Temp. :  -2.86 C   Humid. :  8.07 % (  0.40 hPa )   Solar :  0.00 kW/m2
  Wind  :  10.38 m/s  272 deg   AirPressure : 573.42 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0665
-
 Current time = 2016/09/15 04:19:56
 Aspirin time = 2016/09/15 04:19:55
 Weather time = 2016/09/15 04:19:49
 Aspirin Offset : (Az, El) = ( -12.08,   4.64 )
 Aspirin status : ** WIND ON ** ( C22:on  C6:OFF WIND:on )
 Refraction Corr. status : OK

- UT04:21 (aste16/linux16/OCTC3r2.start)
 az,el = +71 44
 daz,del = +1.0 +9.0
 Tsys: not available on qlookl
-- ERR Invalid TIME data in TPD file (63367,2147483647)
-- Gave up OTF using WHSF

** Updated pointing offset models in DASH345 and BAND8 [#ce9387de]

*** Tuning (aste16/linux16/OCTC3ph.tune) [#re5400be]
- DASH345
 az,el = +71 60
-
 [asteobs@aste-1c ~]$ asterx_set DASH345
 ### Query of LO Freq ###
 LO Freq = 339.951765288
 ### Set CLNA ###
 /cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 339.951765288
 vd0=1.200000, id0=10.000000
 vd1=0.000000, id1=0.000000
 vd2=0.000000, id2=0.000000
 ASTE FEMC:OPEN
 FEMC_TCP 7 
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 ---------- 45 4C 01 08 00 E1nd at Node index 00
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
 OK
 > GET_CLNA 0 1 
 1.204941,10.064087,-0.278259,0.003326,0.012665,4.910492,0.003525,0.023651,4.910461,1
 > GET_CLNA 0 2 
 1.204834,10.039062,-0.381317,0.003235,0.022736,-4.848557,0.004028,0.022125,4.910400,1
 > GET_CLNA 1 1 
 1.205978,10.046387,-0.796066,0.003235,0.023041,-4.882065,0.003250,0.024719,-4.882111,1
 > GET_CLNA 1 2 
 1.206665,10.094604,-0.300995,0.003677,0.018768,-4.882095,0.003540,0.013733,4.931671,1
 > CAN_CLOSE
 CAN closed
 ASTE FEMC:CLOSE
 ### Set SIS bias ###
 /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 339.951765288
 339.951765 1.900000 1.900000 1.900000 1.900000
 ASTE FEMC:OPEN
 FEMC_TCP 7 
 
 Ver 0.91
 > 
 Program running.
 Do not turn off power to CAN nodes.
 ---------- 45 4C 01 08 00 E1nd at Node index 00
 AMBSI CAN Library V1.1.2
 AMBSI Firmware V1.0.1
 FEMC Firmware V2.5.0
 FPGA V2.1.0
 10 F2 B3 58 2 8 0 1B
 1 A4 9A 4F 14 0 0 19
 23 9B DE 4C 1 0 0 44
 0 0 0 0 0 0 0 0
 > SET_SIS_MODE 0 
 SET SIS MODE:CLOSE LOOP
 > SET_SIS_V 0 1 1.900 
 OK
 > SET_SIS_V 0 2 1.900 
 OK
 > SET_SIS_V 1 1 1.900 
 OK
 > SET_SIS_V 1 2 1.900 
 OK
 > GET_SIS_VC 0 1 
 1.773682,21.179199
 > GET_SIS_VC 0 2 
 1.784821,14.276123
 > GET_SIS_VC 1 1 
 1.810760,22.076416
 > GET_SIS_VC 1 2 
 1.813660,20.095825
 > CAN_CLOSE
 CAN closed
 ASTE FEMC:CLOSE
 ### Set LO Power ###
 /cosmos3/naoj/bin/loatt_dash345_tune 339.951765288
 /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 339.951765288
 /cosmos3/naoj/bin/loatt_dash345 277 285
 Set ATT     : Pol0=277, Pol1=285
  Pol0 =      277   , Pol1 =      285
  Pol0 = 0.006761[A], Pol1 = 0.006957[A]
  Pol0 = 0.668121[V], Pol1 = 0.770914[V]
-
 [asteobs@aste-1c ~]$ mmc1_rstop
 [asteobs@aste-1c ~]$ ifeo_tune 1 0.030
 12 dB  0.037676 V
 [asteobs@aste-1c ~]$ ifeo_tune 2 0.050
 14 dB  0.042546 V
-
 [asteobs@aste-1c ~]$ mmc1_sstop
 [asteobs@aste-1c ~]$ yfactor 1
 R=0.035593 V,  Sky=0.022281 V, Y=2.034299 dB
 2.034299
 [asteobs@aste-1c ~]$ yfactor 2
 R=0.044827 V,  Sky=0.019485 V, Y=3.618393 dB
 3.618393

*** Continuous pointing toward O Cet in DASH345 [#dccd35e7]
- UT04:43 (aste16/linux16/OCTC3ph.start)
 az,el = +67 49
 daz,del = +1.0 +9.0
 Tsys A[1,3] = 553.4 259.1
 AV(SEQ1-5) daz,del on qlookl = 0.6 1.2

- UT04:58 stopped by hand
 az,el = +64 52
 daz,del = +1.0 +9.0
 AV(SEQ6-8) daz,del on qlookl = 0.8 1.1

*** Pointing offset models updated in DASH345 and BAND8 [#pa14b73e]
- DASH345 and BAND8
 [astecntl@aste-1c kisag]$ ls -l DASH3 BAND8
 lrwxrwxrwx 1 astecntl astctl 12 Sep 15 05:04 BAND8 -> BAND8.160913
 lrwxrwxrwx 1 astecntl astctl 12 Sep 15 05:04 DASH3 -> DASH3.160913
-
 [astecntl@aste-1c kisag]$ diff BAND8 BAND8.160910
 < P6:(B3+D0+F3+G2+C2) = 0.031982
 ---
 > P6:(B3+D0+F3+G2+C2) = 0.030315
-
 [astecntl@aste-1c kisag]$ diff DASH3 DASH3.160910
 < P6:(B3+D0+F3+G2+C2) = -0.031474
 ---
 > P6:(B3+D0+F3+G2+C2) = -0.0331409

*** Continuous pointing toward O Cet in DASH345 [#sc78cdbc]
- UT05:06 aste16/linux16/OCTC3ph.start
 az,el = 62 53
 daz,del = +1.0 +9.0 -> +2.0 +4.0
 Tsys A[1,3] = 479.1 252.6

- UT05:27
 az,el = 56 58
 daz,del = +2.0 +4.0
 AV(SEQ5-12) daz,del on qlookl = 0.4 0.4

- UT05:42
 az,el = +51 60
 daz,del = +2.0 +4.0
 AV (SEQ16-21) = +0.2 +0.8

- UT06:05
 az,el = +42 64
 daz,del = +2.0 +4.0
 AV (SEQ29-33) = +0.4 +1.2

- UT06:06 aste16/linux16/RDRC3ph.start
 az,el = +153, 38
 daz,del = +2.0 +4.0 -> +2.0 0.0
 AV (SEQ3-6) = +0.8 -1.1

- UT06:50
- UT06:50 Stopped by hand
 az,el = +156 43
 daz,del = +2.0 0.0
 AV (SEQ3-6) = +1.0 -0.2

Front page   Edit Diff History Attach Copy Rename Reload   New Page list Search Recent changes   Help   RSS of recent changes