[[Observing Log]]
----
#contents
----
* CSV2016: Radio pointing offsets of DASH345/BAND8 (2016-09-14) [#q20bad06]
** Tasks [#ke6c0094]
- 220GHz opacity <= 0.07 -> Radio pointing offsets in BAND8
- 220GHz opacity > 0.07 -> Radio pointing offsets in DASH345
- After Saturn sets, long time integration toward O Cet in BAND8
*** Preparations [#l77ada0a]
+ Basic checks
-- Record which kisa files are used for DASH345 and BAND8
+
aste16@aste-ms1: ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
-rw-r--r-- 1 astecntl astctl 771 Sep 10 09:38 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.160910
-rw-r--r-- 1 astecntl astctl 769 Sep 10 09:32 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.160910
-- Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
-- Check Aspirin is working in the "WIND" mode
+ Tuning at EL=60.0 deg
-- [[Tuning of DASH345/BAND8 for continuum observations>CSV/2016#i6322df7]]
-- Don't forget to record weather conditions
*** Radio pointing offsets of DASH345/BAND8 [#t326e16f]
- Its instruction is [[HERE>CSV/RadioPointingMeasurementSBRx]]
+ Repeat cross scans toward Saturn and shots of a star one after the other
+ Data reduction
-- Still under preparation
*** Long time integration toward O Cet in BAND8 CO(J=4-3) LSB with MAC (HIGH) [#h082c810]
- Observation tables
-- Pointing: aste16/linux16/tOCC4ph.start
-- OTF (X-direction): aste16/linux16/tOCC4rh.start
-- OTF (Y-direction): aste16/linux16/tOCC4sh.start
- Repeat the two OTF tables one after the other
- Carry out pointing every 1 hour
-- Don't forget to record daz and del in order to use them for radio pointing at various az and el angles
----
** Information [#g220d683]
- Observers: Tanaka, Matsui
- Site: Mitaka
- Weather conditions (2016-09-14Txx:xx)
Temperature: xxx C
Humidity: xxx hPa
Wind: xxx m/s (xxx deg)
220GHz opacity: xxx
** Radio Pointing Logs [#ree7888e]
- Tuning
Temp. : 0.40 C Humid. : 8.36 % ( 0.53 hPa ) Solar : 0.00 kW/m2
Wind : 8.87 m/s 272 deg AirPressure : 572.90 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0567
[asteobs@aste-1c ~]$ swbox_ctl_be CONT
[asteobs@aste-1c ~]$ swbox_ctl_be
status: swbox_ctl_be CONT
[asteobs@aste-1c ~]$ asterx_sw BAND8 synthe_ctl B FREQ 11.444
### SYNTHE RF-OFF ###
/cosmos3/naoj/bin/synthe_ctl B RF OFF
FREQ = 12.966181108 [GHz]
AMPL = 13.00 [dBm]
RF = ON
### After setting synthe ###
FREQ = 12.966181108 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
### SWBOX changed ###
/cosmos3/naoj/bin/swbox_ctl_rx 1
### SYNTHE set ###
/cosmos3/naoj/bin/synthe_ctl B AMPL +13dBm
FREQ = 12.966181108 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
### After setting synthe ###
FREQ = 12.966181108 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
/cosmos3/naoj/bin/synthe_ctl B RF ON
FREQ = 12.966181108 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
### After setting synthe ###
FREQ = 12.966181108 [GHz]
AMPL = 13.00 [dBm]
RF = ON
[asteobs@aste-1c ~]$ synthe_ctl B FREQ 11.444
FREQ = 12.966181108 [GHz]
AMPL = 13.00 [dBm]
RF = ON
### After setting synthe ###
FREQ = 11.444000000 [GHz]
AMPL = 13.00 [dBm]
RF = ON
[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 411.984000000
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 411.984000000
vd0=0.650000, id0=5.000000
vd1=0.600000, id1=4.500000
vd2=0.600000, id2=4.500000
ASTE FEMC:OPEN
CAN_OPEN 8 FEMC_TCP
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> GET_CLNA 0 1
0.654663,5.028076,-0.174881,0.603928,4.533386,-0.197311,0.604721,4.543762,-0.203964,1
> GET_CLNA 0 2
0.653793,5.039825,-0.194672,0.604324,4.558411,-0.195068,0.604034,4.552155,-0.202301,1
> GET_CLNA 1 1
0.654114,5.035095,-0.182678,0.604172,4.548492,-0.209717,0.604202,4.520874,-0.271118,1
> GET_CLNA 1 2
0.654221,5.016479,-0.170517,0.604691,4.553528,-0.193268,0.604431,4.514465,-0.200516,1
> CAN_CLOSE
CAN closed
> EXITASTE FEMC:CLOSE
### Set Electro-magnet ###
/cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 411.984000000
v=12.800000, 13.400000, 10.400000, 19.100000
ASTE FEMC:OPEN
CAN_OPEN 8 FEMC_TCP
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> ACT_DEMAG 0 1 30.00 1.00 100
OK
> ACT_DEMAG 0 2 30.00 1.00 100
OK
> ACT_DEMAG 1 1 30.00 1.00 100
OK
> ACT_DEMAG 1 2 30.00 1.00 100
OK
> SET_MAG_C 0 1 12.80
OK
> SET_MAG_C 0 2 13.40
OK
> SET_MAG_C 1 1 10.40
OK
> SET_MAG_C 1 2 19.10
OK
> GET_MAG_VC 0 1
0.170639,12.333298
> GET_MAG_VC 0 2
0.170975,12.931824
> GET_MAG_VC 1 1
0.136017,9.861374
> GET_MAG_VC 1 2
0.261475,18.748093
> CAN_CLOSE
CAN closed
> EXITASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 411.984000000
411.984000 2.001608 2.049580 1.996820 1.957012
ASTE FEMC:OPEN
CAN_OPEN 8 FEMC_TCP
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.002
OK
> SET_SIS_V 0 2 2.050
OK
> SET_SIS_V 1 1 1.997
OK
> SET_SIS_V 1 2 1.957
OK
> GET_SIS_VC 0 1
1.913071,56.277466
> GET_SIS_VC 0 2
1.960907,48.022461
> GET_SIS_VC 1 1
1.916809,25.842285
> GET_SIS_VC 1 2
1.952286,977.136230
> CAN_CLOSE
CAN closed
> EXITASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 411.984000000
v=1.828200, -0.300000, 2.500000, -0.350000
ASTE FEMC:OPEN
CAN_OPEN 8 FEMC_TCP
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_PA_VD 0 1.83
OK
> SET_PA_VG 0 -0.30
OK
> SET_PA_VD 1 2.50
OK
> SET_PA_VG 1 -0.35
OK
> GET_PA 0
2.965546,247.680664,-0.290833
> GET_PA 1
4.022064,254.943848,-0.345459
> CAN_CLOSE
CAN closed
> EXITASTE FEMC:CLOSE
[asteobs@aste-1c ~]$ swbox_ctl_pol 1 0
[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 1 0
400:P1-LSB 402:P0-LSB
[asteobs@aste-1c ~]$ cont_if 2 21
Cont IF #2 Att. = 22 [dB]
changed Cont IF #2 att. = 21 [dB]
recieved value = -3.35029000E-04
recieved value = -3.35029000E-04
Cont IF #2 Lev. = -0.000335 [V]
[asteobs@aste-1c ~]$ cont_if 3 23
Cont IF #3 Att. = 0 [dB]
changed Cont IF #3 att. = 0 [dB]
recieved value = -4.12800000E-06
recieved value = -4.12800000E-06
Cont IF #3 Lev. = -0.000004 [V]
[asteobs@aste-1c ~]$
[asteobs@aste-1c ~]$
[asteobs@aste-1c ~]$
[asteobs@aste-1c ~]$ swbox_ctl_be
status: swbox_ctl_be CONT
[asteobs@aste-1c ~]$ asterx_sw BAND8
### SYNTHE RF-OFF ###
/cosmos3/naoj/bin/synthe_ctl B RF OFF
FREQ = 11.444000000 [GHz]
AMPL = 13.00 [dBm]
RF = ON
### After setting synthe ###
FREQ = 11.444000000 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
### SWBOX changed ###
/cosmos3/naoj/bin/swbox_ctl_rx 1
### SYNTHE set ###
/cosmos3/naoj/bin/synthe_ctl B AMPL +13dBm
FREQ = 11.444000000 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
### After setting synthe ###
FREQ = 11.444000000 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
/cosmos3/naoj/bin/synthe_ctl B RF ON
FREQ = 11.444000000 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
### After setting synthe ###
FREQ = 11.444000000 [GHz]
AMPL = 13.00 [dBm]
RF = ON
[asteobs@aste-1c ~]$ asterx_sw
usage: asterx_sw [DASH345/BAND8]
[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 411.984000000
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 411.984000000
vd0=0.650000, id0=5.000000
vd1=0.600000, id1=4.500000
vd2=0.600000, id2=4.500000
ASTE FEMC:OPEN
CAN_OPEN 8 FEMC_TCP
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> GET_CLNA 0 1
0.654694,5.027313,-0.174637,0.604019,4.531860,-0.197006,0.604614,4.548492,-0.203781,1
> GET_CLNA 0 2
0.653809,5.038757,-0.194550,0.604324,4.559631,-0.194870,0.604065,4.553680,-0.202103,1
> GET_CLNA 1 1
0.654144,5.035553,-0.182388,0.604202,4.548035,-0.209549,0.604279,4.519958,-0.270828,1
> GET_CLNA 1 2
0.654236,5.018921,-0.170166,0.604736,4.552612,-0.193054,0.604309,4.511261,-0.200165,1
> CAN_CLOSE
CAN closed
> EXITASTE FEMC:CLOSE
### Set Electro-magnet ###
/cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 411.984000000
v=12.800000, 13.400000, 10.400000, 19.100000
ASTE FEMC:OPEN
CAN_OPEN 8 FEMC_TCP
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> ACT_DEMAG 0 1 30.00 1.00 100
OK
> ACT_DEMAG 0 2 30.00 1.00 100
OK
> ACT_DEMAG 1 1 30.00 1.00 100
OK
> ACT_DEMAG 1 2 30.00 1.00 100
OK
> SET_MAG_C 0 1 12.80
OK
> SET_MAG_C 0 2 13.40
OK
> SET_MAG_C 1 1 10.40
OK
> SET_MAG_C 1 2 19.10
OK
> GET_MAG_VC 0 1
0.171616,12.336349
> GET_MAG_VC 0 2
0.171066,12.928772
> GET_MAG_VC 1 1
0.135437,9.862137
> GET_MAG_VC 1 2
0.262268,18.750763
> CAN_CLOSE
CAN closed
> EXITASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 411.984000000
411.984000 2.001608 2.049580 1.996820 1.957012
ASTE FEMC:OPEN
CAN_OPEN 8 FEMC_TCP
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.002
OK
> SET_SIS_V 0 2 2.050
OK
> SET_SIS_V 1 1 1.997
OK
> SET_SIS_V 1 2 1.957
OK
> GET_SIS_VC 0 1
1.937103,97.882080
> GET_SIS_VC 0 2
1.965103,76.672363
> GET_SIS_VC 1 1
1.916580,25.726318
> GET_SIS_VC 1 2
1.980972,976.876831
> CAN_CLOSE
CAN closed
> EXITASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 411.984000000
v=1.828200, -0.300000, 2.500000, -0.350000
ASTE FEMC:OPEN
CAN_OPEN 8 FEMC_TCP
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
CAN node with adress x13 found at Node index 00S/N: 10 79 45 4C 01 08 00 E1----------
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_PA_VD 0 1.83
OK
> SET_PA_VG 0 -0.30
OK
> SET_PA_VD 1 2.50
OK
> SET_PA_VG 1 -0.35
OK
> GET_PA 0
2.966003,247.589111,-0.290833
> GET_PA 1
4.021454,254.577637,-0.345306
> CAN_CLOSE
CAN closed
> EXITASTE FEMC:CLOSE
[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 1 0
400:P1-LSB 402:P0-LSB
[asteobs@aste-1c ~]$ cont_if 2 21
Cont IF #2 Att. = 22 [dB]
changed Cont IF #2 att. = 21 [dB]
recieved value = -2.45830000E-04
recieved value = -2.45830000E-04
Cont IF #2 Lev. = -0.000246 [V]
[asteobs@aste-1c ~]$ cont_if 3 23
Cont IF #3 Att. = 0 [dB]
changed Cont IF #3 att. = 0 [dB]
recieved value = -6.11760000E-05
recieved value = -6.11760000E-05
Cont IF #3 Lev. = -0.000061 [V]
- UT-0020 istx5b8 start
-- too noisy!
-- Tsys = 200 K
#ref(Screenshot.png,,70%)
- UT-0030 tune & start istx5b8 again
-- too noisy, again
#ref(Screenshot-1.png,,70%)
-- a little better?
- UT00-10 tune DASH345
[asteobs@aste-1c ~]$ asterx_sw DASH345
### SYNTHE RF-OFF ###
/cosmos3/naoj/bin/synthe_ctl B RF OFF
FREQ = 11.444000000 [GHz]
AMPL = 13.00 [dBm]
RF = ON
### After setting synthe ###
FREQ = 11.444000000 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
### SWBOX changed ###
/cosmos3/naoj/bin/swbox_ctl_rx 0
### SYNTHE set ###
/cosmos3/naoj/bin/synthe_ctl B AMPL +20dBm
FREQ = 11.444000000 [GHz]
AMPL = 13.00 [dBm]
RF = OFF
### After setting synthe ###
FREQ = 11.444000000 [GHz]
AMPL = 20.00 [dBm]
RF = OFF
/cosmos3/naoj/bin/synthe_ctl B RF ON
FREQ = 11.444000000 [GHz]
AMPL = 20.00 [dBm]
RF = OFF
### After setting synthe ###
FREQ = 11.444000000 [GHz]
AMPL = 20.00 [dBm]
RF = ON
[asteobs@aste-1c ~]$ synthe_ctl B FREQ 14.375
FREQ = 11.444000000 [GHz]
AMPL = 20.00 [dBm]
RF = ON
### After setting synthe ###
FREQ = 14.375000000 [GHz]
AMPL = 20.00 [dBm]
RF = ON
[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 345.000000000
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 345.000000000
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
CAN_OPEN 7
FEMC_TCP
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
CAN node with adress x13 found at Node index 00
S/N: 10 79 45 4C 01 08 00 E1
----------
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00
OK
> GET_CLNA 0 1
1.205093,10.061493,-0.278336,0.003296,0.013428,4.909836,0.003662,0.021973,4.909775,1
> GET_CLNA 0 2
1.204941,10.052643,-0.382217,0.003250,0.022888,-4.847961,0.004074,0.021973,4.909775,1
> GET_CLNA 1 1
1.205811,10.031738,-0.795395,0.003143,0.021667,-4.882019,0.003220,0.023956,-4.881989,1
> GET_CLNA 1 2
1.206604,10.094757,-0.301697,0.003738,0.019073,-4.882004,0.003387,0.013123,4.931473,1
> CAN_CLOSE
CAN closed
> EXIT
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 345.000000000
345.000000 1.900000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
CAN_OPEN 7
FEMC_TCP
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
CAN node with adress x13 found at Node index 00
S/N: 10 79 45 4C 01 08 00 E1
----------
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.900
OK
> SET_SIS_V 0 2 1.900
OK
> SET_SIS_V 1 1 1.900
OK
> SET_SIS_V 1 2 1.900
OK
> GET_SIS_VC 0 1
1.790543,18.161011
> GET_SIS_VC 0 2
1.792450,22.998047
> GET_SIS_VC 1 1
1.812897,16.348267
> GET_SIS_VC 1 2
1.818848,20.159912
> CAN_CLOSE
CAN closed
> EXIT
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 345.000000000
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 345.000000000
/cosmos3/naoj/bin/loatt_dash345 225 310
Set ATT : Pol0=225, Pol1=310
Pol0 = 225 , Pol1 = 310
Pol0 = 0.005490[A], Pol1 = 0.007567[A]
Pol0 = 0.661290[V], Pol1 = 0.777607[V]
[asteobs@aste-1c ~]$ swbox_ctl_pol 0 1
[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 0 1
400:P0-USB 402:P1-USB
[asteobs@aste-1c ~]$ cont_if 2 22
Cont IF #2 Att. = 21 [dB]
cont_if 3 17 changed Cont IF #2 att. = 22 [dB]
recieved value = -7.51000000E-07
recieved value = -7.51000000E-07
Cont IF #2 Lev. = -0.000001 [V]
[asteobs@aste-1c ~]$ cont_if 3 17
Cont IF #3 Att. = 0 [dB]
changed Cont IF #3 att. = 0 [dB]
recieved value = -2.15555000E-04
recieved value = -2.15555000E-04
Cont IF #3 Lev. = -0.000216 [V]
- UT-0005 start istx5d3
Temp. : 0.27 C Humid. : 8.55 % ( 0.53 hPa ) Solar : 0.00 kW/m2
Wind : 7.31 m/s 269 deg AirPressure : 573.04 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0610
-- dAz, dEl -> +1, +7
- UT-0006 start /cosmos3/naoj/sbinSol/iOPT_r17shm on aste-c1c
- UT-0006 batch execution istd3 started
- envmon@UT0104
Temp. : 2.49 C Humid. : 4.85 % ( 0.35 hPa ) Solar : 0.00 kW/m2
Wind : 6.39 m/s 260 deg AirPressure : 573.52 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0501
- done @approx. UT0230
** Logs of Long-time integration [#ree7888e]
- UT0427 tOCC4ph start (pointing)
-- cannot view the ql monitor. Error 'range over' appears.
- UT0431 restart obs.
- UT0445 stop
** Logs of inspection of BAND8-gizagiza [#oca0a9bb]
- UT0446 iroiro yatta
-- aste16:ast0120:rrrb8.start
-- monitored the R level at fLO = 467 GHz.
- Very unstable level orz...
-- El = 60 deg
#ref(Screenshot-460GHz-R.png,,70%)
-- El = 20 deg.
#ref(Screenshot-460GHz-R-El20.png,,70%)
* FMLO Commissioning from SPdA [#s1cf4951]
- observer: A. Taniguchi
- contact: akio_taniguchi (skype)
** TUNING of DASH345/WHSF [#w5c7b2fe]
- 17:53 - START TUNING
-- aste16/fmlo16/wFX___.tune
-- Az, El = 175, 24 deg
Temp. : 7.34 C Humid. : 4.83 % ( 0.50 hPa ) Solar : 0.97 kW/m2
Wind : 12.40 m/s 260 deg AirPressure : 573.15 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0602
[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 350.890016952
...
Set ATT : Pol0=308, Pol1=287
Pol0 = 308 , Pol1 = 287
Pol0 = 0.007517[A], Pol1 = 0.007005[A]
Pol0 = 0.672271[V], Pol1 = 0.769734[V]
[asteobs@aste-1c ~]$ whsf_tune S1USB S1LSB S2USB S2LSB
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
57.29 66.31 31.88 52.57 81.55 93.92 40.58 74.62 [mV]
***Set ATT***
S1USB:ATT_old = 18.25 [dB]
S1USB:ATT_new = 18.25 [dB]
S1LSB:ATT_old = 17.00 [dB]
S1LSB:ATT_new = 17.25 [dB]
S2USB:ATT_old = 17.00 [dB]
S2USB:ATT_new = 14.50 [dB]
S2LSB:ATT_old = 17.75 [dB]
S2LSB:ATT_new = 17.25 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
56.77 62.31 55.61 59.86 80.59 87.89 70.47 84.57 [mV]
***Set ATT***
S1USB:ATT_old = 18.25 [dB]
S1USB:ATT_new = 18.25 [dB]
S1LSB:ATT_old = 17.25 [dB]
S1LSB:ATT_new = 17.25 [dB]
S2USB:ATT_old = 14.50 [dB]
S2USB:ATT_new = 14.25 [dB]
S2LSB:ATT_old = 17.25 [dB]
S2LSB:ATT_new = 17.25 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
57.11 62.43 60.33 59.93 81.30 88.68 77.11 85.00 [mV]
[asteobs@aste-1c ~]$ whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
57.64 62.19 60.03 60.64 81.97 87.71 76.43 86.40 [mV]
***Set ATT***
S1IFA:ATT_old = 6.75 [dB]
S1IFA:ATT_new = 6.50 [dB]
S1IFB:ATT_old = 5.50 [dB]
S1IFB:ATT_new = 5.50 [dB]
S2IFA:ATT_old = 6.50 [dB]
S2IFA:ATT_new = 6.00 [dB]
S2IFB:ATT_old = 7.00 [dB]
S2IFB:ATT_new = 7.00 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
57.67 62.61 60.47 60.71 88.06 89.06 90.18 86.49 [mV]
***Set ATT***
S1IFA:ATT_old = 6.50 [dB]
S1IFA:ATT_new = 6.50 [dB]
S1IFB:ATT_old = 5.50 [dB]
S1IFB:ATT_new = 5.50 [dB]
S2IFA:ATT_old = 6.00 [dB]
S2IFA:ATT_new = 6.00 [dB]
S2IFB:ATT_old = 7.00 [dB]
S2IFB:ATT_new = 7.00 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
57.46 62.62 60.43 60.40 87.77 89.13 90.27 85.94 [mV]
[asteobs@aste-1c ~]$ whsf_rsky
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
29.7 31.9 36.2 28.9 44.0 46.5 52.1 40.7 [mV]
Result: R-SKY
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
2.866 2.911 2.202 3.212 2.989 2.762 2.325 3.260 [dB]
Result: Tsys[Tamb=293K]
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
313.5 306.9 443.8 267.5 295.8 329.7 413.8 262.0 [K]
[asteobs@aste-1c ~]$ mmc1_rstop
[asteobs@aste-1c ~]$ whsf_stab 10
*** average ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
-40.1 48.2 37.4 -31.0 28.4 82.5 2.4 110.3 [mV]
*** stability ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
-1318.20 1063.62 1312.74 -1707.18 1818.29 610.81 22802.60 492.55 [%]
- 18:03 UTC - START TUNING again
** Measurement of Time Synchronization with WHSF [#p0203f6b]
- before observations, I change the values of syn_fmlo_tolerance.def as follows
# +ERROR (>0) +WARNING (>=0) -WARNING (>=0) -ERROR (>0) [millisecond] (integer)
100 99 99 100
- 18:09 UTC - wFXp34 with TRIG_DELAY = 130 us
-- aste16/fmlo16/wFXp34.start
-- Az, El = -178, 28 deg
2016-09-14 18:14:54.951 aste-f1c astref3 DEB ****** EXECUTE
2016-09-14 18:14:54.951 aste-f1c astref3 DEB ON 600s 20160914181503 - 20160915181502 (86399)
2016-09-14 18:14:54.964 aste-f1c astref3 DEB [FMLO] 0.1000s 863990
2016-09-14 18:14:54.964 aste-f1c astref3 DEB ** 1/3 waiting ...
2016-09-14 18:15:00.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE LIST
2016-09-14 18:15:00.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE?
2016-09-14 18:15:00.063 aste-f1c astref3 DEB RCV[0]=LIST 0.063
2016-09-14 18:15:00.096 aste-f1c astref3 DEB SND[5]=BURS:STAT 1
2016-09-14 18:15:00.096 aste-f1c astref3 DEB SND[5]=BURS:STAT?
2016-09-14 18:15:00.220 aste-f1c astref3 DEB RCV[5]=1 0.123
2016-09-14 18:15:00.221 aste-f1c astref3 DEB SND[5]=INIT:CONT 0
2016-09-14 18:15:00.221 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 18:15:00.421 aste-f1c astref3 DEB RCV[5]=0 0.201
2016-09-14 18:15:00.422 aste-f1c astref3 DEB SND[0]=INIT:CONT 0
2016-09-14 18:15:00.422 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 18:15:00.463 aste-f1c astref3 DEB RCV[0]=0 0.040
2016-09-14 18:15:00.464 aste-f1c astref3 DEB SND[5]=OUTP 1
2016-09-14 18:15:00.464 aste-f1c astref3 DEB SND[5]=OUTP?
2016-09-14 18:15:00.623 aste-f1c astref3 DEB RCV[5]=1 0.159
2016-09-14 18:15:00.624 aste-f1c astref3 DEB ** 2/3 waiting ...
2016-09-14 18:15:01.050 aste-f1c astref3 DEB SND[5]=INIT:CONT 1
2016-09-14 18:15:01.050 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 18:15:01.230 aste-f1c astref3 DEB RCV[5]=1 0.180
2016-09-14 18:15:01.231 aste-f1c astref3 DEB ** 3/3 waiting ...
2016-09-14 18:15:02.050 aste-f1c astref3 DEB SND[0]=INIT:CONT 1
2016-09-14 18:15:02.050 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 18:15:02.063 aste-f1c astref3 DEB RCV[0]=1 0.013
2016-09-14 18:15:02.900 aste-f1c astref3 WAR ET=0.000 RT=-0.099285 (-0.099285) C=1
2016-09-14 18:15:02.900 aste-f1c astref3 DEB ET=0.000 RT=-0.099285 (-0.099285) C=1
2016-09-14 18:15:03.000 aste-f1c astref3 WAR ET=0.100 RT=0.000171 (-0.099829) C=2
2016-09-14 18:15:03.100 aste-f1c astref3 WAR ET=0.200 RT=0.100356 (-0.099644) C=3
2016-09-14 18:15:03.200 aste-f1c astref3 WAR ET=0.300 RT=0.200835 (-0.099165) C=4
2016-09-14 18:15:03.300 aste-f1c astref3 WAR ET=0.400 RT=0.300723 (-0.099277) C=5
2016-09-14 18:15:03.400 aste-f1c astref3 WAR ET=0.500 RT=0.400626 (-0.099374) C=6
2016-09-14 18:15:03.500 aste-f1c astref3 WAR ET=0.600 RT=0.500784 (-0.099216) C=7
2016-09-14 18:15:03.600 aste-f1c astref3 WAR ET=0.700 RT=0.600130 (-0.099870) C=8
2016-09-14 18:15:03.700 aste-f1c astref3 WAR ET=0.800 RT=0.700513 (-0.099487) C=9
2016-09-14 18:15:03.800 aste-f1c astref3 WAR ET=0.900 RT=0.800473 (-0.099527) C=10
2016-09-14 18:15:04.000 aste-f1c astref3 WAR ET=1.100 RT=1.000186 (-0.099814) C=12
2016-09-14 18:15:04.008 aste-f1c astref3 WAR The timing of FMLO list sweep was beyond the WARNING tolerable range 10 time(s)/sec.
-- observation stopped by a FFX ERR
--- Invalid TIME data in TPD file (785608,2147483647)
- 18:22 UTC - wFXp34 with TRIG_DELAY = 130 us (again)
-- aste16/fmlo16/wFXp34.start
-- observation stopped before ON observation by a FFX ERR
--- if_tpd_mon: -1 AIF: OUT connection error
- 18:30 UTC - wFXp34 with TRIG_DELAY = 130 us (again)
-- aste16/fmlo16/wFXp34.start
2016-09-14 18:31:23.551 aste-f1c astref3 DEB ****** EXECUTE
2016-09-14 18:31:23.551 aste-f1c astref3 DEB ON 600s 20160914183132 - 20160915183131 (86399)
2016-09-14 18:31:23.564 aste-f1c astref3 DEB [FMLO] 0.1000s 863990
2016-09-14 18:31:23.564 aste-f1c astref3 DEB ** 1/3 waiting ...
2016-09-14 18:31:29.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE LIST
2016-09-14 18:31:29.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE?
2016-09-14 18:31:29.124 aste-f1c astref3 DEB RCV[0]=LIST 0.124
2016-09-14 18:31:29.125 aste-f1c astref3 DEB SND[5]=BURS:STAT 1
2016-09-14 18:31:29.126 aste-f1c astref3 DEB SND[5]=BURS:STAT?
2016-09-14 18:31:29.249 aste-f1c astref3 DEB RCV[5]=1 0.123
2016-09-14 18:31:29.250 aste-f1c astref3 DEB SND[5]=INIT:CONT 0
2016-09-14 18:31:29.250 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 18:31:29.451 aste-f1c astref3 DEB RCV[5]=0 0.201
2016-09-14 18:31:29.452 aste-f1c astref3 DEB SND[0]=INIT:CONT 0
2016-09-14 18:31:29.452 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 18:31:29.524 aste-f1c astref3 DEB RCV[0]=0 0.072
2016-09-14 18:31:29.525 aste-f1c astref3 DEB SND[5]=OUTP 1
2016-09-14 18:31:29.525 aste-f1c astref3 DEB SND[5]=OUTP?
2016-09-14 18:31:29.652 aste-f1c astref3 DEB RCV[5]=1 0.127
2016-09-14 18:31:29.654 aste-f1c astref3 DEB ** 2/3 waiting ...
2016-09-14 18:31:30.050 aste-f1c astref3 DEB SND[5]=INIT:CONT 1
2016-09-14 18:31:30.050 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 18:31:30.158 aste-f1c astref3 DEB RCV[5]=1 0.109
2016-09-14 18:31:30.159 aste-f1c astref3 DEB ** 3/3 waiting ...
2016-09-14 18:31:31.050 aste-f1c astref3 DEB SND[0]=INIT:CONT 1
2016-09-14 18:31:31.050 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 18:31:31.124 aste-f1c astref3 DEB RCV[0]=1 0.075
2016-09-14 18:31:31.900 aste-f1c astref3 WAR ET=0.000 RT=-0.099780 (-0.099780) C=1
2016-09-14 18:31:31.900 aste-f1c astref3 DEB ET=0.000 RT=-0.099780 (-0.099780) C=1
2016-09-14 18:31:32.000 aste-f1c astref3 WAR ET=0.100 RT=0.000434 (-0.099566) C=2
2016-09-14 18:31:32.100 aste-f1c astref3 WAR ET=0.200 RT=0.100621 (-0.099379) C=3
2016-09-14 18:31:32.200 aste-f1c astref3 WAR ET=0.300 RT=0.200659 (-0.099341) C=4
2016-09-14 18:31:32.300 aste-f1c astref3 WAR ET=0.400 RT=0.300498 (-0.099502) C=5
2016-09-14 18:31:32.400 aste-f1c astref3 WAR ET=0.500 RT=0.400525 (-0.099475) C=6
2016-09-14 18:31:32.500 aste-f1c astref3 WAR ET=0.600 RT=0.500716 (-0.099284) C=7
2016-09-14 18:31:32.600 aste-f1c astref3 WAR ET=0.700 RT=0.600840 (-0.099160) C=8
2016-09-14 18:31:32.800 aste-f1c astref3 WAR ET=0.900 RT=0.800140 (-0.099860) C=10
2016-09-14 18:31:32.900 aste-f1c astref3 WAR ET=1.000 RT=0.900384 (-0.099616) C=11
2016-09-14 18:31:33.008 aste-f1c astref3 WAR The timing of FMLO list sweep was beyond the WARNING tolerable range 10 time(s)/sec.
-- observation stopped by a FFX ERR
--- Invalid TIME data in TPD file (786565,2147483647)
** TUNING of DASH345/MAC [#g5fdc017]
-- 18:41 UTC - START TUNING
-- aste16/fmlo16/wFX___.tune
-- Az, El = -178, 28 deg
Temp. : 7.16 C Humid. : 5.85 % ( 0.59 hPa ) Solar : 0.84 kW/m2
Wind : 10.52 m/s 263 deg AirPressure : 573.10 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0594
[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.559126800
...
Set ATT : Pol0=292, Pol1=286
Pol0 = 292 , Pol1 = 286
Pol0 = 0.007126[A], Pol1 = 0.006981[A]
Pol0 = 0.669109[V], Pol1 = 0.769608[V]
[asteobs@aste-1c ~]$ mmc1_rstop
[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
E/O att. = 16 dB E/O att. = 16 dB IF level=0.024427
new E/O att. = 16 dB IF level=0.024451
new E/O att. = 14 dB IF level=0.039757
new E/O att. = 16 dB IF level=0.022064
16 dB 0.022064 V
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
E/O att. = 15 dB IF level=0.057583
new E/O att. = 15 dB IF level=0.058571
new E/O att. = 16 dB IF level=0.042373
new E/O att. = 15 dB IF level=0.061002
new E/O att. = 16 dB IF level=0.044049
16 dB 0.044049 V
[asteobs@aste-1c ~]$ mmc1_sstop
[asteobs@aste-1c ~]$ yfactor 1
E/O att. = 16 dB
E/O IF level = 0.013758 V
R=0.024471 V, Sky=0.013758 V, Y=2.500964 dB
2.500964
[asteobs@aste-1c ~]$ yfactor 2
E/O att. = 16 dB
E/O IF level = 0.029220 V
R=0.045779 V, Sky=0.029220 V, Y=1.949861 dB
1.949861
- 18:46 UTC - START TUNING again
** Measurement of Time Synchronization with MAC (Test!) [#j7bbcdce]
- 18:48 UTC - mFXp33 with TRIG_DELAY = 130 us
-- aste16/fmlo16/mFXp33.start
-- Az, El = -177, 27 deg
2016-09-14 18:51:44.251 aste-f1c astref3 DEB ****** EXECUTE
2016-09-14 18:51:44.251 aste-f1c astref3 DEB ON 1800s 20160914185153 - 20160915185152 (86399)
2016-09-14 18:51:44.264 aste-f1c astref3 DEB [FMLO] 0.1000s 863990
2016-09-14 18:51:44.264 aste-f1c astref3 DEB ** 1/3 waiting ...
2016-09-14 18:51:50.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE LIST
2016-09-14 18:51:50.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE?
2016-09-14 18:51:50.201 aste-f1c astref3 DEB RCV[0]=LIST 0.201
2016-09-14 18:51:50.202 aste-f1c astref3 DEB SND[5]=BURS:STAT 1
2016-09-14 18:51:50.202 aste-f1c astref3 DEB SND[5]=BURS:STAT?
2016-09-14 18:51:50.368 aste-f1c astref3 DEB RCV[5]=1 0.165
2016-09-14 18:51:50.369 aste-f1c astref3 DEB SND[5]=INIT:CONT 0
2016-09-14 18:51:50.369 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 18:51:50.570 aste-f1c astref3 DEB RCV[5]=0 0.201
2016-09-14 18:51:50.571 aste-f1c astref3 DEB SND[0]=INIT:CONT 0
2016-09-14 18:51:50.571 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 18:51:50.601 aste-f1c astref3 DEB RCV[0]=0 0.030
2016-09-14 18:51:50.602 aste-f1c astref3 DEB SND[5]=OUTP 1
2016-09-14 18:51:50.602 aste-f1c astref3 DEB SND[5]=OUTP?
2016-09-14 18:51:50.772 aste-f1c astref3 DEB RCV[5]=1 0.169
2016-09-14 18:51:50.773 aste-f1c astref3 DEB ** 2/3 waiting ...
2016-09-14 18:51:51.050 aste-f1c astref3 DEB SND[5]=INIT:CONT 1
2016-09-14 18:51:51.050 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 18:51:51.176 aste-f1c astref3 DEB RCV[5]=1 0.126
2016-09-14 18:51:51.177 aste-f1c astref3 DEB ** 3/3 waiting ...
2016-09-14 18:51:52.050 aste-f1c astref3 DEB SND[0]=INIT:CONT 1
2016-09-14 18:51:52.050 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 18:51:52.201 aste-f1c astref3 DEB RCV[0]=1 0.151
2016-09-14 18:51:52.900 aste-f1c astref3 WAR ET=0.000 RT=-0.099148 (-0.099148) C=1
2016-09-14 18:51:52.900 aste-f1c astref3 DEB ET=0.000 RT=-0.099148 (-0.099148) C=1
2016-09-14 18:51:53.100 aste-f1c astref3 WAR ET=0.200 RT=0.100128 (-0.099872) C=3
2016-09-14 18:51:53.200 aste-f1c astref3 WAR ET=0.300 RT=0.200082 (-0.099918) C=4
2016-09-14 18:51:53.300 aste-f1c astref3 WAR ET=0.400 RT=0.300625 (-0.099375) C=5
2016-09-14 18:51:53.400 aste-f1c astref3 WAR ET=0.500 RT=0.400335 (-0.099665) C=6
2016-09-14 18:51:53.500 aste-f1c astref3 WAR ET=0.600 RT=0.500530 (-0.099470) C=7
2016-09-14 18:51:53.600 aste-f1c astref3 WAR ET=0.700 RT=0.600628 (-0.099372) C=8
2016-09-14 18:51:53.700 aste-f1c astref3 WAR ET=0.800 RT=0.700950 (-0.099050) C=9
2016-09-14 18:51:53.800 aste-f1c astref3 WAR ET=0.900 RT=0.800040 (-0.099960) C=10
2016-09-14 18:51:53.900 aste-f1c astref3 WAR ET=1.000 RT=0.900045 (-0.099955) C=11
2016-09-14 18:51:54.000 aste-f1c astref3 WAR ET=1.100 RT=1.000241 (-0.099759) C=12
2016-09-14 18:51:54.007 aste-f1c astref3 WAR The timing of FMLO list sweep was beyond the WARNING tolerable range 10 time(s)/sec.
...
2016-09-14 18:52:07.100 aste-f1c astref3 WAR ET=14.200 RT=14.100617 (-0.099383) C=143
2016-09-14 18:52:07.200 aste-f1c astref3 WAR ET=14.300 RT=14.200630 (-0.099370) C=144
2016-09-14 18:52:07.300 aste-f1c astref3 WAR ET=14.400 RT=14.300636 (-0.099364) C=145
2016-09-14 18:52:07.400 aste-f1c astref3 WAR ET=14.500 RT=14.400746 (-0.099254) C=146
2016-09-14 18:52:07.500 aste-f1c astref3 WAR ET=14.600 RT=14.500838 (-0.099162) C=147
2016-09-14 18:52:07.600 aste-f1c astref3 WAR ET=14.700 RT=14.600813 (-0.099187) C=148
2016-09-14 18:52:07.700 aste-f1c astref3 WAR ET=14.800 RT=14.700837 (-0.099163) C=149
2016-09-14 18:52:07.899 aste-f1c astref3 ERR ET=15.000 RT=14.899977 (-0.100023) C=151
2016-09-14 18:52:07.900 aste-f1c astref3 INF ET=15.000 RT=14.899977 C=151 last
2016-09-14 18:52:07.901 aste-f1c astref3 ERR The timing of FMLO list sweep was beyond the ERROR tolerable range (-100.0 ms).
- 18:55 UTC - mFXp33 with TRIG_DELAY = 130 us (again)
-- aste16/fmlo16/mFXp33.start
-- Az, El = -177, 27 deg
-- ET-RT is same as the previous observation (~ -99 ms)
- 19:08 UTC - restart FMLO LC
[root@aste-f1c ~]# /cosmos3/aste/rc3.d/S98astref3 restart
Shutting down S98astref3:
Starting S98astref3 (refadm):
- 19:09 UTC - mFXp33 with TRIG_DELAY = 130 us (again)
-- aste16/fmlo16/mFXp33.start
-- Az, El = -177, 27 deg
-- ET-RT is same as the previous observation (~ -99 ms)
-- observation stopped by a SYNTHE_C ERR
--- The timing of FMLO list sweep was beyond the ERROR tolerable range (-100.0 ms)
- 19:15 UTC - mFXp33 with TRIG_DELAY = 130 us (again)
-- aste16/fmlo16/mFXp33.start
-- Az, El = -177, 27 deg
# +ERROR (>0) +WARNING (>=0) -WARNING (>=0) -ERROR (>0) [millisecond] (integer)
5 4 4 5
2016-09-14 19:16:35.550 aste-f1c astref3 DEB ****** EXECUTE
2016-09-14 19:16:35.550 aste-f1c astref3 DEB ON 1800s 20160914191644 - 20160915191643 (86399)
2016-09-14 19:16:35.564 aste-f1c astref3 DEB [FMLO] 0.1000s 863990
2016-09-14 19:16:35.564 aste-f1c astref3 DEB ** 1/3 waiting ...
2016-09-14 19:16:41.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE LIST
2016-09-14 19:16:41.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE?
2016-09-14 19:16:41.094 aste-f1c astref3 DEB RCV[0]=LIST 0.095
2016-09-14 19:16:41.096 aste-f1c astref3 DEB SND[5]=BURS:STAT 1
2016-09-14 19:16:41.096 aste-f1c astref3 DEB SND[5]=BURS:STAT?
2016-09-14 19:16:41.299 aste-f1c astref3 DEB RCV[5]=1 0.203
2016-09-14 19:16:41.300 aste-f1c astref3 DEB SND[5]=INIT:CONT 0
2016-09-14 19:16:41.300 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 19:16:41.503 aste-f1c astref3 DEB RCV[5]=0 0.203
2016-09-14 19:16:41.504 aste-f1c astref3 DEB SND[0]=INIT:CONT 0
2016-09-14 19:16:41.504 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 19:16:41.694 aste-f1c astref3 DEB RCV[0]=0 0.190
2016-09-14 19:16:41.696 aste-f1c astref3 DEB SND[5]=OUTP 1
2016-09-14 19:16:41.696 aste-f1c astref3 DEB SND[5]=OUTP?
2016-09-14 19:16:41.910 aste-f1c astref3 DEB RCV[5]=1 0.214
2016-09-14 19:16:41.911 aste-f1c astref3 DEB ** 2/3 waiting ...
2016-09-14 19:16:42.050 aste-f1c astref3 DEB SND[5]=INIT:CONT 1
2016-09-14 19:16:42.050 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 19:16:42.175 aste-f1c astref3 DEB RCV[5]=1 0.125
2016-09-14 19:16:42.176 aste-f1c astref3 DEB ** 3/3 waiting ...
2016-09-14 19:16:43.050 aste-f1c astref3 DEB SND[0]=INIT:CONT 1
2016-09-14 19:16:43.050 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 19:16:43.094 aste-f1c astref3 DEB RCV[0]=1 0.045
2016-09-14 19:16:43.900 aste-f1c astref3 WAR ET=0.000 RT=-0.099508 approach
2016-09-14 19:16:44.000 aste-f1c astref3 DEB ET=0.000 RT=0.000689 (+0.000689) C=1
2016-09-14 19:16:54.000 aste-f1c astref3 DEB ET=10.000 RT=10.000429 (+0.000429) C=101
2016-09-14 19:17:04.000 aste-f1c astref3 DEB ET=20.000 RT=20.000365 (+0.000365) C=201
2016-09-14 19:17:14.000 aste-f1c astref3 DEB ET=30.000 RT=30.000390 (+0.000390) C=301
2016-09-14 19:17:24.000 aste-f1c astref3 DEB ET=40.000 RT=40.000061 (+0.000061) C=401
2016-09-14 19:17:34.000 aste-f1c astref3 DEB ET=50.000 RT=50.000748 (+0.000748) C=501
-- seems to have no problem
- 19:22 UTC - mFXp33 with TRIG_DELAY = 130 us (again)
-- aste16/fmlo16/mFXp33.start
-- Az, El = -177, 27 deg
# +ERROR (>0) +WARNING (>=0) -WARNING (>=0) -ERROR (>0) [millisecond] (integer)
100 99 99 100
2016-09-14 19:23:22.250 aste-f1c astref3 DEB ****** EXECUTE
2016-09-14 19:23:22.250 aste-f1c astref3 DEB ON 1800s 20160914192331 - 20160915192330 (86399)
2016-09-14 19:23:22.264 aste-f1c astref3 DEB [FMLO] 0.1000s 863990
2016-09-14 19:23:22.264 aste-f1c astref3 DEB ** 1/3 waiting ...
2016-09-14 19:23:28.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE LIST
2016-09-14 19:23:28.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE?
2016-09-14 19:23:28.119 aste-f1c astref3 DEB RCV[0]=LIST 0.120
2016-09-14 19:23:28.121 aste-f1c astref3 DEB SND[5]=BURS:STAT 1
2016-09-14 19:23:28.121 aste-f1c astref3 DEB SND[5]=BURS:STAT?
2016-09-14 19:23:28.297 aste-f1c astref3 DEB RCV[5]=1 0.175
2016-09-14 19:23:28.298 aste-f1c astref3 DEB SND[5]=INIT:CONT 0
2016-09-14 19:23:28.298 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 19:23:28.499 aste-f1c astref3 DEB RCV[5]=0 0.201
2016-09-14 19:23:28.500 aste-f1c astref3 DEB SND[0]=INIT:CONT 0
2016-09-14 19:23:28.500 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 19:23:28.519 aste-f1c astref3 DEB RCV[0]=0 0.020
2016-09-14 19:23:28.521 aste-f1c astref3 DEB SND[5]=OUTP 1
2016-09-14 19:23:28.521 aste-f1c astref3 DEB SND[5]=OUTP?
2016-09-14 19:23:28.721 aste-f1c astref3 DEB RCV[5]=1 0.200
2016-09-14 19:23:28.722 aste-f1c astref3 DEB ** 2/3 waiting ...
2016-09-14 19:23:29.050 aste-f1c astref3 DEB SND[5]=INIT:CONT 1
2016-09-14 19:23:29.050 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 19:23:29.206 aste-f1c astref3 DEB RCV[5]=1 0.156
2016-09-14 19:23:29.207 aste-f1c astref3 DEB ** 3/3 waiting ...
2016-09-14 19:23:30.050 aste-f1c astref3 DEB SND[0]=INIT:CONT 1
2016-09-14 19:23:30.050 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 19:23:30.120 aste-f1c astref3 DEB RCV[0]=1 0.070
2016-09-14 19:23:30.900 aste-f1c astref3 WAR ET=0.000 RT=-0.099223 (-0.099223) C=1
2016-09-14 19:23:30.900 aste-f1c astref3 DEB ET=0.000 RT=-0.099223 (-0.099223) C=1
2016-09-14 19:23:31.000 aste-f1c astref3 WAR ET=0.100 RT=0.000562 (-0.099438) C=2
2016-09-14 19:23:31.100 aste-f1c astref3 WAR ET=0.200 RT=0.100468 (-0.099532) C=3
2016-09-14 19:23:31.200 aste-f1c astref3 WAR ET=0.300 RT=0.200276 (-0.099724) C=4
2016-09-14 19:23:31.300 aste-f1c astref3 WAR ET=0.400 RT=0.300471 (-0.099529) C=5
- ET-RT seems to depend on the tolerance values ...?
** Tuning of DASH345/WHSF [#k0672968]
- 19:27 UTC - START TUNING
-- aste16/fmlo16/wFX___.tune
-- Az, -177, 70 deg
[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 350.890528512
...
Set ATT : Pol0=308, Pol1=287
Pol0 = 308 , Pol1 = 287
Pol0 = 0.007517[A], Pol1 = 0.007006[A]
Pol0 = 0.672145[V], Pol1 = 0.769596[V]
[asteobs@aste-1c ~]$ whsf_tune S1USB S1LSB S2USB S2LSB
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
60.13 61.39 108.36 63.74 96.27 86.67 195.63 94.34 [mV]
***Set ATT***
S1USB:ATT_old = 18.25 [dB]
S1USB:ATT_new = 18.25 [dB]
S1LSB:ATT_old = 17.25 [dB]
S1LSB:ATT_new = 17.25 [dB]
S2USB:ATT_old = 14.25 [dB]
S2USB:ATT_new = 16.75 [dB]
S2LSB:ATT_old = 17.25 [dB]
S2LSB:ATT_new = 17.50 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
60.26 61.51 59.06 59.87 96.34 87.04 106.69 88.45 [mV]
***Set ATT***
S1USB:ATT_old = 18.25 [dB]
S1USB:ATT_new = 18.25 [dB]
S1LSB:ATT_old = 17.25 [dB]
S1LSB:ATT_new = 17.25 [dB]
S2USB:ATT_old = 16.75 [dB]
S2USB:ATT_new = 16.75 [dB]
S2LSB:ATT_old = 17.50 [dB]
S2LSB:ATT_new = 17.50 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
59.93 61.34 58.41 59.75 95.67 86.61 105.22 88.20 [mV]
[asteobs@aste-1c ~]$ whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
61.19 62.02 59.07 60.98 98.47 88.35 107.56 90.60 [mV]
***Set ATT***
S1IFA:ATT_old = 6.50 [dB]
S1IFA:ATT_new = 6.75 [dB]
S1IFB:ATT_old = 5.50 [dB]
S1IFB:ATT_new = 5.50 [dB]
S2IFA:ATT_old = 6.00 [dB]
S2IFA:ATT_new = 6.75 [dB]
S2IFB:ATT_old = 7.00 [dB]
S2IFB:ATT_new = 7.00 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
60.43 61.56 58.64 60.41 90.54 87.14 86.69 89.75 [mV]
***Set ATT***
S1IFA:ATT_old = 6.75 [dB]
S1IFA:ATT_new = 6.75 [dB]
S1IFB:ATT_old = 5.50 [dB]
S1IFB:ATT_new = 5.50 [dB]
S2IFA:ATT_old = 6.75 [dB]
S2IFA:ATT_new = 6.75 [dB]
S2IFB:ATT_old = 7.00 [dB]
S2IFB:ATT_new = 7.00 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
60.71 61.77 58.75 60.56 91.00 87.57 87.06 89.83 [mV]
[asteobs@aste-1c ~]$ whsf_rsky
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
23.3 24.4 27.5 22.5 34.3 36.1 40.1 32.9 [mV]
Result: R-SKY
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
4.134 4.028 3.314 4.276 4.205 3.832 3.370 4.320 [dB]
Result: Tsys[Tamb=293K]
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
184.2 191.7 256.0 174.7 179.4 206.8 249.8 172.0 [K]
[asteobs@aste-1c ~]$ mmc1_rstop
[asteobs@aste-1c ~]$ whsf_stab 10
*** average ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
135.8 106.3 108.6 78.9 74.9 124.6 58.9 54.0 [mV]
*** stability ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
392.81 478.87 488.79 665.05 739.91 445.61 831.00 1020.90 [%]
- 19:36 UTC - START TUNING again
** Measurement of Time Synchronization with WHSF [#f3857135]
- 19:38 UTC - - wFXp34 with TRIG_DELAY = 130 us
-- aste16/fmlo16/wFXp34.start
# +ERROR (>0) +WARNING (>=0) -WARNING (>=0) -ERROR (>0) [millisecond] (integer)
5 4 4 5
2016-09-14 19:39:23.651 aste-f1c astref3 DEB ****** EXECUTE
2016-09-14 19:39:23.651 aste-f1c astref3 DEB ON 600s 20160914193932 - 20160915193931 (86399)
2016-09-14 19:39:23.665 aste-f1c astref3 DEB [FMLO] 0.1000s 863990
2016-09-14 19:39:23.665 aste-f1c astref3 DEB ** 1/3 waiting ...
2016-09-14 19:39:29.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE LIST
2016-09-14 19:39:29.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE?
2016-09-14 19:39:29.180 aste-f1c astref3 DEB RCV[0]=LIST 0.181
2016-09-14 19:39:29.182 aste-f1c astref3 DEB SND[5]=BURS:STAT 1
2016-09-14 19:39:29.182 aste-f1c astref3 DEB SND[5]=BURS:STAT?
2016-09-14 19:39:29.296 aste-f1c astref3 DEB RCV[5]=1 0.113
2016-09-14 19:39:29.297 aste-f1c astref3 DEB SND[5]=INIT:CONT 0
2016-09-14 19:39:29.297 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 19:39:29.511 aste-f1c astref3 DEB RCV[5]=0 0.214
2016-09-14 19:39:29.512 aste-f1c astref3 DEB SND[0]=INIT:CONT 0
2016-09-14 19:39:29.512 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 19:39:29.580 aste-f1c astref3 DEB RCV[0]=0 0.068
2016-09-14 19:39:29.582 aste-f1c astref3 DEB SND[5]=OUTP 1
2016-09-14 19:39:29.582 aste-f1c astref3 DEB SND[5]=OUTP?
2016-09-14 19:39:29.699 aste-f1c astref3 DEB RCV[5]=1 0.117
2016-09-14 19:39:29.701 aste-f1c astref3 DEB ** 2/3 waiting ...
2016-09-14 19:39:30.050 aste-f1c astref3 DEB SND[5]=INIT:CONT 1
2016-09-14 19:39:30.050 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 19:39:30.205 aste-f1c astref3 DEB RCV[5]=1 0.156
2016-09-14 19:39:30.206 aste-f1c astref3 DEB ** 3/3 waiting ...
2016-09-14 19:39:31.050 aste-f1c astref3 DEB SND[0]=INIT:CONT 1
2016-09-14 19:39:31.050 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 19:39:31.181 aste-f1c astref3 DEB RCV[0]=1 0.131
2016-09-14 19:39:31.900 aste-f1c astref3 WAR ET=0.000 RT=-0.099356 approach
2016-09-14 19:39:32.000 aste-f1c astref3 DEB ET=0.000 RT=0.000848 (+0.000848) C=1
-- ET-RT seems to be good
-- but observation stopped by a FFX ERR
--- Invalid TIME data in TPD file (798837,2147483647)
- 19:42 UTC - wFXp34 with TRIG_DELAY = 130 us (again)
-- aste16/fmlo16/wFXp34.start
# +ERROR (>0) +WARNING (>=0) -WARNING (>=0) -ERROR (>0) [millisecond] (integer)
5 4 4 5
-- observation stopped before ON observation by a FFX ERR
--- if_tpd_mon: -1 AIF: CTL connection error
- 19:47 UTC - WHSF reboot
[asteobs@aste-1c ~]$ ffx_sw REBOOT
[asteobs@aste-1c ~]$ whsf_ae_sw REBOOT (after 5 min from the previous command)
[asteobs@aste-1c ~]$ whsf_ae_init
- 19:55 UTC - START TUNING again
- 19:59 UTC - wFXp34 with TRIG_DELAY = 130 us (again)
-- aste16/fmlo16/wFXp34.start
# +ERROR (>0) +WARNING (>=0) -WARNING (>=0) -ERROR (>0) [millisecond] (integer)
5 4 4 5
2016-09-14 20:00:04.951 aste-f1c astref3 DEB ****** EXECUTE
2016-09-14 20:00:04.951 aste-f1c astref3 DEB ON 600s 20160914200013 - 20160915200012 (86399)
2016-09-14 20:00:04.964 aste-f1c astref3 DEB [FMLO] 0.1000s 863990
2016-09-14 20:00:04.964 aste-f1c astref3 DEB ** 1/3 waiting ...
2016-09-14 20:00:10.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE LIST
2016-09-14 20:00:10.000 aste-f1c astref3 DEB SND[0]=FREQ:MODE?
2016-09-14 20:00:10.058 aste-f1c astref3 DEB RCV[0]=LIST 0.059
2016-09-14 20:00:10.060 aste-f1c astref3 DEB SND[5]=BURS:STAT 1
2016-09-14 20:00:10.060 aste-f1c astref3 DEB SND[5]=BURS:STAT?
2016-09-14 20:00:10.268 aste-f1c astref3 DEB RCV[5]=1 0.208
2016-09-14 20:00:10.269 aste-f1c astref3 DEB SND[5]=INIT:CONT 0
2016-09-14 20:00:10.269 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 20:00:10.472 aste-f1c astref3 DEB RCV[5]=0 0.203
2016-09-14 20:00:10.473 aste-f1c astref3 DEB SND[0]=INIT:CONT 0
2016-09-14 20:00:10.473 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 20:00:10.658 aste-f1c astref3 DEB RCV[0]=0 0.185
2016-09-14 20:00:10.660 aste-f1c astref3 DEB SND[5]=OUTP 1
2016-09-14 20:00:10.660 aste-f1c astref3 DEB SND[5]=OUTP?
2016-09-14 20:00:10.765 aste-f1c astref3 DEB RCV[5]=1 0.105
2016-09-14 20:00:10.766 aste-f1c astref3 DEB ** 2/3 waiting ...
2016-09-14 20:00:11.050 aste-f1c astref3 DEB SND[5]=INIT:CONT 1
2016-09-14 20:00:11.050 aste-f1c astref3 DEB SND[5]=INIT:CONT?
2016-09-14 20:00:11.187 aste-f1c astref3 DEB RCV[5]=1 0.137
2016-09-14 20:00:11.188 aste-f1c astref3 DEB ** 3/3 waiting ...
2016-09-14 20:00:12.050 aste-f1c astref3 DEB SND[0]=INIT:CONT 1
2016-09-14 20:00:12.050 aste-f1c astref3 DEB SND[0]=INIT:CONT?
2016-09-14 20:00:12.058 aste-f1c astref3 DEB RCV[0]=1 0.009
2016-09-14 20:00:12.900 aste-f1c astref3 WAR ET=0.000 RT=-0.099639 approach
2016-09-14 20:00:13.000 aste-f1c astref3 DEB ET=0.000 RT=0.000882 (+0.000882) C=1
-- ET-RT seems to be good
-- but observation stopped by a FFX ERR
--- Invalid TIME data in TPD file (798837,2147483647)
** Check for WHSF/PSW Observation [#l2633f0d]
- 20:08 UTC - IRAS16293 PSW
-- aste16/fmlo16/wIRpsw.start
-- Az, El = 99, 73 deg
- 20:19 UTC - IRAS16293 PSW2
-- aste16/fmlo16/wIRpsw2.start
--- this obstable is a copy of aste16/linux16/OriK-c2.start
--- but the source position is changed to that of IRAS16293 manually
-- Az, El = 99, 74 deg
-- I got spectrum in the line qlook (it seems to work fine)
--- although Tsys is not good because of no tuning for the obstable
--- anyway, I have confirmed that WHSF works with ASTE CSV's obstable
** [#k0c10697]
** 20:30 UTC - End of Observation [#k0c10697]
- park the antenna at Az, El = -180, 60 deg
- set to STBY
- release the priority
![[PukiWiki]](http://www2.nao.ac.jp/~aste-www/aste_wiki/obs.jpg "[PukiWiki]")
