[[Observing Log]]
----
#contents
----
* CSV2016: Radio pointing offsets of DASH345/BAND8 (2016-09-12) [#d26c4ae7]
** Tasks [#c850fc39]
- 220GHz opacity <= 0.07 -> Radio pointing offsets in BAND8
- 220GHz opacity > 0.07 -> Radio pointing offsets in DASH345
*** Preparations [#x85c9ee5]
+ Basic checks
-- Record which kisa files are used for DASH345 and BAND8
--- &color(red){Kisa files will be updated in the morning of JST2016-09-12};
+
aste16@aste-ms1: ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
-rw-r--r-- 1 astecntl astctl 771 Sep 10 09:38 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.160910
-rw-r--r-- 1 astecntl astctl 769 Sep 10 09:32 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.160910
-- Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
-- Check Aspirin is working in the "WIND" mode
+ Tuning at EL=60.0 deg
-- [[Tuning of DASH345/BAND8 for continuum observations>CSV/2016#i6322df7]]
-- Don't forget to record weather conditions
*** Radio pointing offsets of DASH345/BAND8 [#wa890f4e]
- Its instruction is [[HERE>CSV/RadioPointingMeasurementSBRx]]
+ Repeat cross scans toward Saturn and shots of a star one after the other
+ Data reduction
-- Still under preparation
----
** Information [#b9407689]
- Observers: Kamazaki
- Site: Mitaka
- Weather conditions (2016-09-11UT23:25)
Temperature: +1.2 C
Humidity: 0.66 hPa
Wind: 1.9 m/s (23 deg)
220GHz opacity: 0.037
** Radio pointing offsets in BAND8 [#vd6a0b21]
- 220GHz opacity <= 0.07 -> Radio pointing offsets in BAND8
*** KISA files were changed as follows [#xe3180b2]
[asteobs@aste-1c kisag]$ ls -l DASH3 BAND8
lrwxrwxrwx 1 astecntl astctl 12 Jun 3 2015 BAND8 -> BAND8.150603
lrwxrwxrwx 1 astecntl astctl 12 Jun 1 2015 DASH3 -> DASH3.150601
[astecntl@aste-1c kisag]$ ln -sf BAND8.160910 BAND8
[astecntl@aste-1c kisag]$ ln -sf DASH3.160910 DASH3
[astecntl@aste-1c kisag]$ ls -l DASH3 BAND8
lrwxrwxrwx 1 astecntl astctl 12 Sep 11 23:16 BAND8 -> BAND8.160910
lrwxrwxrwx 1 astecntl astctl 12 Sep 11 23:16 DASH3 -> DASH3.160910
*** OPT check [#kbee3c6e]
- aste-c1c not responding -> power-cycle
[asteobs@aste-1c ~]$ ssh aste-c1c
ssh: connect to host aste-c1c port 22: No route to host
-
Entering character/text Mode
Escape character is ^]
-
[asteobs@aste-1c ~]$ tap_lt1500.py lantap0 1 off
POS=100,100,100,100
POF1
POS=000,100,100,100
[asteobs@aste-1c ~]$ sleep 10
[asteobs@aste-1c ~]$ tap_lt1500.py lantap0 1 on
POS=000,100,100,100
PON1
POS=100,100,100,100
-
[asteobs@aste-mx1 ~]$ ssh astecntl@aste-c1c /cosmos3/naoj/sbinSol/optinit
device: [ ok ]
mmap: [ ok ]
init bcr: [ ok ]
init: [ ok ]
initLUT: [ ok ]
clear FB: [ ok ]
AVME-338B -> successfully initialized
[aste16@aste-ms1 ~]$ ~/analysis/bin/optshot.sh r 1 128
* image plane = r -> offset=0
* # of frames = 1
* frame capture delay = 1 (sec)
* fov = blc(192, 192) - trc(319, 319)
001 [2016-09-11T23:23:58]: max,min,mean,sdev = 99 31 59.291 7.211
-rw-r--r-- 1 aste16 astgrp 16384 Sep 11 23:24 /var/tmp/opt_aste16.raw
-> 163-16C could be seen in the image
*** Tuning [#wa96fcc5]
- Tuning BAND8
2016/09/11 23:25:43
Temp. : 1.15 C Humid. : 9.92 % ( 0.66 hPa ) Solar : 0.00 kW/m2
Wind : 1.90 m/s 23 deg AirPressure : 575.25 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0366
-
Current time = 2016/09/11 23:25:53
Aspirin time = 2016/09/11 23:25:51
Weather time = 2016/09/11 23:25:38
Aspirin Offset : (Az, El) = ( 2.24, -10.26 )
Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on )
Refraction Corr. status : OK
-
[asteobs@aste-1c ~]$ swbox_ctl_be CONT
[asteobs@aste-1c ~]$ swbox_ctl_be
status: swbox_ctl_be CONT
-
[asteobs@aste-1c ~]$ asterx_sw BAND8
### After setting synthe ###
FREQ = 13.509142460 [GHz]
AMPL = 13.00 [dBm]
RF = ON
[asteobs@aste-1c ~]$ synthe_ctl B FREQ 11.444
### After setting synthe ###
FREQ = 11.444000000 [GHz]
AMPL = 13.00 [dBm]
RF = ON
-
[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 411.984000000
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 411.984000000
vd0=0.650000, id0=5.000000
vd1=0.600000, id1=4.500000
vd2=0.600000, id2=4.500000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> GET_CLNA 0 1
0.654678,5.027313,-0.175568,0.604019,4.535065,-0.197937,0.604752,4.553833,-0.204742,1
> GET_CLNA 0 2
0.653809,5.040588,-0.195389,0.604324,4.559326,-0.195755,0.604080,4.556580,-0.203049,1
> GET_CLNA 1 1
0.654221,5.038147,-0.182907,0.604202,4.548035,-0.210236,0.604279,4.522705,-0.271378,1
> GET_CLNA 1 2
0.654221,5.018005,-0.170746,0.604630,4.555359,-0.193619,0.604340,4.513855,-0.200836,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set Electro-magnet ###
/cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 411.984000000
v=12.800000, 13.400000, 10.400000, 19.100000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> ACT_DEMAG 0 1 30.00 1.00 100
OK
> ACT_DEMAG 0 2 30.00 1.00 100
OK
> ACT_DEMAG 1 1 30.00 1.00 100
OK
> ACT_DEMAG 1 2 30.00 1.00 100
OK
> SET_MAG_C 0 1 12.80
OK
> SET_MAG_C 0 2 13.40
OK
> SET_MAG_C 1 1 10.40
OK
> SET_MAG_C 1 2 19.10
OK
> GET_MAG_VC 0 1
0.170273,12.332535
> GET_MAG_VC 0 2
0.172043,12.925720
> GET_MAG_VC 1 1
0.135269,9.858322
> GET_MAG_VC 1 2
0.263474,18.743515
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 411.984000000
411.984000 2.001608 2.049580 1.996820 1.957012
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.002
OK
> SET_SIS_V 0 2 2.050
OK
> SET_SIS_V 1 1 1.997
OK
> SET_SIS_V 1 2 1.957
OK
> GET_SIS_VC 0 1
1.911697,66.195679
> GET_SIS_VC 0 2
1.961594,55.599976
> GET_SIS_VC 1 1
1.916733,25.482178
> GET_SIS_VC 1 2
1.897583,976.937866
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 411.984000000
v=1.828200, -0.300000, 2.500000, -0.350000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_PA_VD 0 1.83
OK
> SET_PA_VG 0 -0.30
OK
> SET_PA_VD 1 2.50
OK
> SET_PA_VG 1 -0.35
OK
> GET_PA 0
2.965851,247.573853,-0.291138
> GET_PA 1
4.022980,255.645752,-0.345459
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
-
[asteobs@aste-1c ~]$ swbox_ctl_pol 1 0
[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 1 0
400:P1-LSB 402:P0-LSB
-
[asteobs@aste-1c ~]$ cont_if 2 21
changed Cont IF #2 att. = 21 [dB]
Cont IF #2 Lev. = -0.000103 [V]
[asteobs@aste-1c ~]$ cont_if 3 23
changed Cont IF #3 att. = 0 [dB]
Cont IF #3 Lev. = -0.000280 [V]
*** Radio pointing offsets in BAND8 [#ee5bee0f]
- UT23:30 Pointing (aste16/radpon/istx5b8.start)
az,el = -89 65
daz,del = +3.0 +3.0
dx,dy,dz,dtx,dty,dtz = all 0.0s
- no qlookc plot
-- Restarting S98astqlcsv at the ASTE and MTK sites
- UT23:33 Pointing (aste16/radpon/istx5b8.start)
az,el = -90 63
daz,del = +3.0 +3.0 -> -2.0 +4.0
- UT23:39 aste16/radpon/istb8.list
az,el = -90 62
daz,del = -2.0 +4.0
-
[asteobs@aste-1c ~]$ ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}
lrwxrwxrwx 1 astecntl astctl 12 Sep 11 23:16 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.160910
lrwxrwxrwx 1 astecntl astctl 12 Sep 11 23:16 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.160910
-
2016/09/11 23:58:03
Temp. : -0.54 C Humid. : 11.05 % ( 0.65 hPa ) Solar : 0.00 kW/m2
Wind : 4.45 m/s 223 deg AirPressure : 575.29 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0569
-
Current time = 2016/09/11 23:58:13
Aspirin time = 2016/09/11 23:58:12
Weather time = 2016/09/11 23:58:06
Aspirin Offset : (Az, El) = ( 3.86, -9.88 )
Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on )
Refraction Corr. status : OK
- UT01:08
az,el = -97 42
-
2016/09/12 01:07:59
Temp. : -2.48 C Humid. : 13.29 % ( 0.68 hPa ) Solar : 0.00 kW/m2
Wind : 6.02 m/s 271 deg AirPressure : 575.46 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0272
-
Current time = 2016/09/12 01:08:07
Aspirin time = 2016/09/12 01:08:06
Weather time = 2016/09/12 01:07:58
Aspirin Offset : (Az, El) = ( 3.82, -6.36 )
Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on )
Refraction Corr. status : OK
- UT02:49 stopped by hand due to EL<20 degrees
az,el = -104 19
daz,del = -2 4
-
2016/09/12 02:52:51
Temp. : -1.36 C Humid. : 4.55 % ( 0.25 hPa ) Solar : 0.00 kW/m2
Wind : 2.01 m/s 128 deg AirPressure : 574.95 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0062
-
Current time = 2016/09/12 02:52:53
Aspirin time = 2016/09/12 02:52:52
Weather time = 2016/09/12 02:52:41
Aspirin Offset : (Az, El) = ( 7.26, 5.62 )
Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on )
Refraction Corr. status : OK
** Long time integration in BAND8 [#f0cb405e]
*** Tuning [#lf4539ed]
- Tuning in BAND8 (aste16/linux16/tEPC4ph.start)
az,el = -50 60
-
[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 466.888839912
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 466.888839912
vd0=0.650000, id0=5.000000
vd1=0.600000, id1=4.500000
vd2=0.600000, id2=4.500000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> GET_CLNA 0 1
0.654541,5.028534,-0.174820,0.604004,4.535980,-0.197174,0.604675,4.544678,-0.203949,1
> GET_CLNA 0 2
0.653763,5.039062,-0.194717,0.604324,4.560242,-0.195114,0.604095,4.552917,-0.202454,1
> GET_CLNA 1 1
0.654129,5.038147,-0.182556,0.604248,4.548035,-0.209915,0.604202,4.517365,-0.271149,1
> GET_CLNA 1 2
0.654358,5.018616,-0.170593,0.604691,4.553528,-0.193375,0.604385,4.515839,-0.200485,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set Electro-magnet ###
/cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 466.888839912
v=12.800000, 13.400000, 13.800000, 19.100000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> ACT_DEMAG 0 1 30.00 1.00 100
OK
> ACT_DEMAG 0 2 30.00 1.00 100
OK
> ACT_DEMAG 1 1 30.00 1.00 100
OK
> ACT_DEMAG 1 2 30.00 1.00 100
OK
> SET_MAG_C 0 1 12.80
OK
> SET_MAG_C 0 2 13.40
OK
> SET_MAG_C 1 1 13.80
OK
> SET_MAG_C 1 2 19.10
OK
> GET_MAG_VC 0 1
0.170563,12.320709
> GET_MAG_VC 0 2
0.170410,12.918472
> GET_MAG_VC 1 1
0.180359,13.241577
> GET_MAG_VC 1 2
0.261795,18.737411
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 466.888839912
466.888840 1.797500 1.785277 1.762723 1.766723
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.798
OK
> SET_SIS_V 0 2 1.785
OK
> SET_SIS_V 1 1 1.763
OK
> SET_SIS_V 1 2 1.767
OK
> GET_SIS_VC 0 1
1.706924,104.724121
> GET_SIS_VC 0 2
1.699219,103.628540
> GET_SIS_VC 1 1
1.686554,47.860718
> GET_SIS_VC 1 2
1.675949,778.332520
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 466.888839912
v=1.300000, -0.300000, 2.500000, -0.350000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_PA_VD 0 1.30
OK
> SET_PA_VG 0 -0.30
OK
> SET_PA_VD 1 2.50
OK
> SET_PA_VG 1 -0.35
OK
> GET_PA 0
2.108002,208.496094,-0.290833
> GET_PA 1
4.022369,241.821289,-0.345612
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
[asteobs@aste-1c ~]$
-
[asteobs@aste-1c ~]$ mmc1_rstop
[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
16 dB 0.020869 V
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
16 dB 0.043618 V
-
[asteobs@aste-1c ~]$ mmc1_sstop
[asteobs@aste-1c ~]$ yfactor 1
R=0.030207 V, Sky=0.016851 V, Y=2.534819 dB
2.534819
-- IF1 comes from P1L, which is broken and very unstable. So, this Y factor is unreliable.
-- Unstable IF1 signals can be confirmed from the following simple tests
[asteobs@aste-1c ~]$ mmc1_rstop
[asteobs@aste-1c ~]$ ifeo 1
E/O att. = 16 dB
E/O IF level = 0.017645 V <---***
[asteobs@aste-1c ~]$ ifeo 1
E/O att. = 16 dB
E/O IF level = 0.032223 V
[asteobs@aste-1c ~]$ ifeo 1
E/O att. = 16 dB
E/O IF level = 0.033162 V
[asteobs@aste-1c ~]$ ifeo 1
E/O att. = 16 dB
E/O IF level = 0.032210 V
[asteobs@aste-1c ~]$ ifeo 1
E/O att. = 16 dB
E/O IF level = 0.033844 V
[asteobs@aste-1c ~]$ ifeo 1
E/O att. = 16 dB
E/O IF level = 0.031044 V
[asteobs@aste-1c ~]$ ifeo 1
E/O att. = 16 dB
E/O IF level = 0.023682 V <---***
[asteobs@aste-1c ~]$ ifeo 1
E/O att. = 16 dB
E/O IF level = 0.031821 V
[asteobs@aste-1c ~]$ ifeo 1
E/O att. = 16 dB
E/O IF level = 0.032577 V
[asteobs@aste-1c ~]$ ifeo 1
E/O att. = 16 dB
E/O IF level = 0.032076 V
-
[asteobs@aste-1c ~]$ yfactor 2
R=0.046909 V, Sky=0.033486 V, Y=1.463929 dB
1.463929
-
[asteobs@aste-1c ~]$ swbox_ctl_be CONT
[asteobs@aste-1c ~]$ swbox_ctl_be
status: swbox_ctl_be CONT
[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 1 0
400:P1-LSB 402:P0-LSB
-
[asteobs@aste-1c ~]$ cont_if 2 21
changed Cont IF #2 att. = 21 [dB]
Cont IF #2 Lev. = -0.000290 [V]
[asteobs@aste-1c ~]$ cont_if 3 21
changed Cont IF #3 att. = 0 [dB]
Cont IF #3 Lev. = -0.000799 [V]
- UT04:38 aste16/ast0120/stx5b8.start
-- Unstable signals in P0-LSB
#ref(ast0120stx5b8.png,,50%)
/home/aste16/ast0120/continuum/data/CONT.stx5b8.aste16.ast0120.201609120438.LCK
/home/aste16/ast0120/continuum/data/CONT.stx5b8.aste16.ast0120.201609120441.LCK
- UT04:45 Tuning (aste16/linux16/tEPC4ph.start)
[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 466.888725396
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl BAND8 CLNA_ON 466.888725396
vd0=0.650000, id0=5.000000
vd1=0.600000, id1=4.500000
vd2=0.600000, id2=4.500000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 0 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 1 0.65 5.00 0.60 4.50 0.60 4.50
OK
> SET_CLNA 1 2 0.65 5.00 0.60 4.50 0.60 4.50
OK
> GET_CLNA 0 1
0.654602,5.026703,-0.174896,0.604050,4.529724,-0.197266,0.604630,4.550476,-0.203888,1
> GET_CLNA 0 2
0.653763,5.039673,-0.194733,0.604294,4.559479,-0.195145,0.604126,4.550171,-0.202332,1
> GET_CLNA 1 1
0.654083,5.035095,-0.182632,0.604202,4.551086,-0.209839,0.604233,4.523163,-0.271011,1
> GET_CLNA 1 2
0.654236,5.017090,-0.170456,0.604752,4.552155,-0.193344,0.604492,4.515686,-0.200348,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set Electro-magnet ###
/cosmos3/naoj/bin/femc_ctl BAND8 MAG_ON 466.888725396
v=12.800000, 13.400000, 13.800000, 19.100000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> ACT_DEMAG 0 1 30.00 1.00 100
OK
> ACT_DEMAG 0 2 30.00 1.00 100
OK
> ACT_DEMAG 1 1 30.00 1.00 100
OK
> ACT_DEMAG 1 2 30.00 1.00 100
OK
> SET_MAG_C 0 1 12.80
OK
> SET_MAG_C 0 2 13.40
OK
> SET_MAG_C 1 1 13.80
OK
> SET_MAG_C 1 2 19.10
OK
> GET_MAG_VC 0 1
0.170639,12.318039
> GET_MAG_VC 0 2
0.169830,12.917709
> GET_MAG_VC 1 1
0.180832,13.240051
> GET_MAG_VC 1 2
0.261948,18.734741
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl BAND8 SIS_ON 466.888725396
466.888725 1.797500 1.785276 1.762724 1.766724
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.798
OK
> SET_SIS_V 0 2 1.785
OK
> SET_SIS_V 1 1 1.763
OK
> SET_SIS_V 1 2 1.767
OK
> GET_SIS_VC 0 1
1.702652,104.757690
> GET_SIS_VC 0 2
1.698761,103.536987
> GET_SIS_VC 1 1
1.684113,47.753906
> GET_SIS_VC 1 2
1.657333,846.234131
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/femc_ctl BAND8 WCA_ON 466.888725396
v=1.300000, -0.300000, 2.500000, -0.350000
ASTE FEMC:OPEN
FEMC_TCP 8
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_PA_VD 0 1.30
OK
> SET_PA_VG 0 -0.30
OK
> SET_PA_VD 1 2.50
OK
> SET_PA_VG 1 -0.35
OK
> GET_PA 0
2.107697,208.328247,-0.290985
> GET_PA 1
4.022217,241.790771,-0.345764
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
-
[asteobs@aste-1c ~]$ mmc1_rstop
[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
16 dB 0.038495 V
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
16 dB 0.041758 V
-
[asteobs@aste-1c ~]$ mmc1_sstop
[asteobs@aste-1c ~]$ yfactor 1
R=0.027155 V, Sky=0.022780 V, Y=0.762961 dB
0.762961
[asteobs@aste-1c ~]$ yfactor 2
R=0.045430 V, Sky=0.032401 V, Y=1.467843 dB
1.467843
[asteobs@aste-1c ~]$
-
[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 1 0
400:P1-LSB 402:P0-LSB
- UT05:08 Pointing (aste16/linux16/tEPC4ph.start)
daz,del -> -1.0 +6.0
Tsys A[3,4] = 812.7 851.4
-- MAC A1(= BAND8 P1L) -> different baseline levels and shapes in different scans
#ref(A1(P1L).png,,25%)
-- MAC A4(= BAND8 P0L) -> stable baselines
#ref(A4(P0L).png,,25%)
- UT05:21 aste16/linux16/tEPC4ch.start
az,el = -70 43
daz,del = -1.0 +6.0
dx,dy,dz,dtx,dty,dtz = all 0.0s
Tsys A[3,4]= 887 922
-
2016/09/12 05:45:15
Temp. : -0.03 C Humid. : 3.82 % ( 0.23 hPa ) Solar : 0.00 kW/m2
Wind : 0.21 m/s 12 deg AirPressure : 574.05 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0514
-
Current time = 2016/09/12 05:45:16
Aspirin time = 2016/09/12 05:45:15
Weather time = 2016/09/12 05:45:06
Aspirin Offset : (Az, El) = ( 3.99, -10.15 )
Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on )
Refraction Corr. status : OK
- UT06:25
az,el = -76 34
Tsys A[3,4] = 966 1010
-- It looks that 12CO(J=4-3) spectra toward EP Aqr are reasonable in BAND8 P0L.
-- MAC-A3(BAND8 P0L)
-- MAC A3(= BAND8 P0L)
#ref(EPAqr-A3on.png,,50%);
-- MAC-A4(BAND8 P0L)
-- MAC A4(= BAND8 P0L)
#ref(EPAqr-A4on.png,,50%);
- UT06:34 Pointing (aste16/linux16/tOCC4ph.start)
az,el = +33 67
daz,del = -1.0 +6.0 -> -2.0 +7.0
Tsys A[3,4] = 681.9 708.7
- UT06:43 OTF toward O-Cet in 12CO(J=4-3) (aste16/linux16/tOCC4rh.start)
az,el = +28
daz,del = -2.0 +7.0
Tsys A[3,4] = 691 722
-
2016/09/12 06:45:14
Temp. : -3.32 C Humid. : 4.27 % ( 0.20 hPa ) Solar : 0.00 kW/m2
Wind : 4.49 m/s 164 deg AirPressure : 573.42 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0631
-
Current time = 2016/09/12 06:45:15
Aspirin time = 2016/09/12 06:45:15
Weather time = 2016/09/12 06:45:13
Aspirin Offset : (Az, El) = ( -6.35, -6.30 )
Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on )
Refraction Corr. status : OK
- UT07:10 OTF toward O-Cet in 12CO(J=4-3) (aste16/linux16/tOCC4sh.start)
- UT07:39 OTF toward O-Cet in 12CO(J=4-3) (aste16/linux16/tOCC4rh.start)
- UT08:03
az,el = -26 68
Tsys A[3,4] = 692 723
-
2016/09/12 08:04:18
Temp. : -0.70 C Humid. : 3.05 % ( 0.18 hPa ) Solar : 0.00 kW/m2
Wind : 1.79 m/s 291 deg AirPressure : 573.08 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0370
-
Current time = 2016/09/12 08:04:25
Aspirin time = 2016/09/12 08:04:24
Weather time = 2016/09/12 08:04:13
Aspirin Offset : (Az, El) = ( 3.49, -9.70 )
Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on )
Refraction Corr. status : OK
- UT08:06 OTF toward O-Cet in 12CO(J=4-3) (aste16/linux16/tOCC4sh.start)
az,el = -29 67
Tsys A[3,4] = 685 718
- UT08:31
az,el = -61 64
Tsys A[3,4] = 675 704
-
2016/09/12 08:34:03
Temp. : -1.65 C Humid. : 3.32 % ( 0.18 hPa ) Solar : 0.00 kW/m2
Wind : 6.84 m/s 317 deg AirPressure : 573.04 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0483
-
Current time = 2016/09/12 08:34:06
Aspirin time = 2016/09/12 08:34:05
Weather time = 2016/09/12 08:33:58
Aspirin Offset : (Az, El) = ( 12.09, 2.33 )
Aspirin status : ** WIND ON ** ( C22:on C6:OFF WIND:on )
Refraction Corr. status : OK