[[Observing Log]]
----
#contents
----
* CSV2016: Subref tilt offsets of DASH345/BAND8 (2016-08-25) [#l2a68976]
** Tasks [#f05acf73]
- 220GHz opacity <= 0.07 -> Subref tilt offsets in BAND8
- 220GHz opacity > 0.07 -> Subref tilt offsets in DASH345
*** Preparations [#e23fc48f]
+ Basic checks
-- Record which kisa files are used for DASH345 and BAND8
+
aste16@aste-ms1: ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
lrwxrwxrwx 1 astecntl astctl 12 Jun 3 2015 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.150603
lrwxrwxrwx 1 astecntl astctl 12 Jun 1 2015 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.150601
-- Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
-- Check Aspirin is working in the "WIND ON" mode
+ Tuning at EL=60.0 deg
-- [[Tuning of DASH345/BAND8 for continuum observations>CSV/2016#i6322df7]]
-- Don't forget to record weather conditions
*** Subref tilt offsets in DASH345/BAND8 [#aca6b3c4]
+ Repeat cross scans toward Saturn with various (dtx,dty)
-- Pointing toward Saturn
BAND8: stx5b8.start
DASH345: stx5d3.start
-- Repeat cross scans toward Saturn using the batch mode
BAND8: ststb8.list (NOT stsbb8.list)
DASH345: ststd3.list (NOT stsbd3.list)
---&color(red){Don't forget to turn on auto-pointing in the QLOOKC GUI};
---&color(red){Set AVERAGE = 1 in the QLOOKC GUI};
+ Data reduction
-- Still under preparation
----
** Information [#zd64d321]
- Observers: Izumi
- Site: Mitaka
- Weather conditions (2016-08-25T:0130)
Temperature: -3.93 C
Humidity: 0.82 hPa
Wind: 1.76 m/s (251 deg)
220GHz opacity: 0.0499
- 220GHz opacity <= 0.07 -> Subref tilt offsets in BAND8
** Measurement Log [#q1ed769e]
***Preparation [#v595b665]
+ Basic checks
-- Record which kisa files are used for DASH345 and BAND8
[asteobs@aste-mx1 ~]$ ssh astecntl@aste-1c "ls -l /cosmos3/aste/etc/kisag/{DASH3,BAND8}"
Warning: Permanently added 'aste-1c,200.91.21.140' (RSA) to the list of known hosts.
astecntl@aste-1c's password:
lrwxrwxrwx 1 astecntl astctl 12 Jun 3 2015 /cosmos3/aste/etc/kisag/BAND8 -> BAND8.150603
lrwxrwxrwx 1 astecntl astctl 12 Jun 1 2015 /cosmos3/aste/etc/kisag/DASH3 -> DASH3.150601
-- Check all subref parameters (dx,dy,dz,dtx,dty,dtz) are zero
-- Check Aspirin is working in the "WIND ON" mode~
=>Aspirin monitor: weather time was not updated.
---Restart COSMOS at ASTE site
ssh -t aste-1c "sudo /cosmos3/naoj/sbin/cos3_cntl restart all"
---Restart connection from remote site to ASTE site
ssh -t aste-mt1 "sudo /cosmos3/naoj/sbin/cos3_cntl restart"
=>weather time was not fixed (and changed 1970/01/01 00:00:00 ??)
#ref(./Aspirin-20160825.png,100%)
---Restart Envmon/Aspirin on aste-v1c
ssh aste-v1c "/opt/sudo/bin/sudo /cosmos3/naoj/rc3.d/S99astnaojd stop; nohup /opt/sudo/bin/sudo /cosmos3/naoj/rc3.d/S99astnaojd start"
---Restart Aspirin on aste-1c
ssh -t aste-1c "sudo /cosmos3/naoj/rc3.d/S99astnaojd stop; nohup sudo /cosmos3/naoj/rc3.d/S99astnaojd start"
=>weather time was not fixed
---Restart aste-1c ~
=>weather time was fixed but c22 was off (Aspirin status: wrong, connection inactive)
ERROR autoweather
Ex)
2016/08/25 01:15:20 ERROR autoweather : Time drift too large (environ) 1472087719 0 even 10 retry
2016/08/25 01:15:31 ERROR autoweather : Time drift too large (environ) 1472087730 0 even 10 retry
2016/08/25 01:15:42 ERROR autoweather : Time drift too large (environ) 1472087741 0 even 10 retry
2016/08/25 01:15:53 ERROR autoweather : Time drift too large (environ) 1472087752 0 even 10 retry
2016/08/25 01:16:04 ERROR autoweather : Time drift too large (environ) 1472087763 0 even 10 retry
2016/08/25 01:16:06 ERROR cadac2asp : wait_new_vkdata() timeout tim=-106692 tim1=0 tim2=0 tim3=0
2016/08/25 01:16:06 ERROR cadac2asp : wait_new_vkdata() error in proc_exec()
2016/08/25 01:16:06 ERROR cadac2asp : cadac2asp proc error
---Restart aste-v1c~
=>All problem was resolved
---Turn on Aspirin-blue (wind correction)
ssh aste-1c "/cosmos3/naoj/bin/windsw on"
+ Tuning at EL=60.0 deg
ASTE Environment Monitor 2016/08/25 01:34:17
===================================ASTE Site===================================
Temp. : -3.93 C Humid. : 18.05 % ( 0.82 hPa ) Solar : 0.00 kW/m2
Wind : 1.76 m/s 251 deg AirPressure : 573.01 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0499
================================ Receiver Cabin ===============================
Main Cabin: 18.7 C Upper Cabin: 12.2 C AzTEC AE: 168.6 C Dewar: 168.6 C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 14.71 degC Humid. : 5.83 %
Digital BE: 15.20 degC 15.40 degC 15.30 degC 15.30 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 13.50 C 14.40 C 15.10 C 15.10 C -9.50 C 14.50 C
Internal Ret. 14.90 C 14.80 C 15.30 C 15.00 C 15.10 C 14.00 C
External 168.60 C -7.10 C -5.90 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 4.50 degC 4.90 degC -5.09 degC
Room Temp.: 5.30 degC
+
[asteobs@aste-1c ~]$ swbox_ctl_be CONT
[asteobs@aste-1c ~]$ swbox_ctl_be
status: swbox_ctl_be CONT
+
[asteobs@aste-1c ~]$ asterx_sw BAND8
---
### After setting synthe ###
FREQ = 14.375000000 [GHz]
AMPL = 13.00 [dBm]
RF = ON
+
[asteobs@aste-1c ~]$ synthe_ctl B FREQ 11.444
FREQ = 14.375000000 [GHz]
AMPL = 13.00 [dBm]
RF = ON
### After setting synthe ###
FREQ = 11.444000000 [GHz]
AMPL = 13.00 [dBm]
RF = ON
+
[asteobs@aste-1c ~]$ asterx_set BAND8
### Query of LO Freq ###
LO Freq = 411.984000000
---
> GET_PA 0
2.966614,247.756958,-0.291138
> GET_PA 1
4.022522,259.246826,-0.345764
+
[asteobs@aste-1c ~]$ swbox_ctl_pol 1 0
[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 1 0
400:P1-LSB 402:P0-LSB
+
[asteobs@aste-1c ~]$ cont_if 2 21
Cont IF #2 Att. = 22 [dB]
---
Cont IF #2 Lev. = -0.000314 [V]
+
[asteobs@aste-1c ~]$ cont_if 3 23
---
Cont IF #3 Lev. = -0.000082 [V]
*** Subref tilt offsets in DASH345/BAND8 [#aca6b3c4]
+ Repeat cross scans toward Saturn with various (dtx,dty)
-- UTC 01:45 Pointing toward Saturn
BAND8: stx5b8.start
--
Temp. : -3.74 C Humid. : 17.76 % ( 0.82 hPa ) Solar : 0.00 kW/m2
Wind : 0.80 m/s 350 deg AirPressure : 573.02 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0444
--
ddAz, ddEl = -0.3, 0.8
-- UTC 02:02 Repeat cross scans toward Saturn using the batch mode
BAND8: ststb8.list (NOT stsbb8.list)
--
Temp. : -4.74 C Humid. : 18.87 % ( 0.81 hPa ) Solar : 0.00 kW/m2
Wind : 3.29 m/s 270 deg AirPressure : 573.03 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0222
--- UTC 02:03 Stop the observation (AVERAGE = 2 in the QLOOKC GUI)~
=> Set AVERAGE = 1 in the QLOOCK GUI and restart the observation
---El < ~ 30deg CH01 cannot detect the Saturn ??
#ref(./Cross-scan-Saturn-20160825.png,50%)~
--- UTC 04:00 Stop the observation (Antenna can not move El < 20) <= ELEVATION was "STBY" (mistake ??)~
=> Set ELEVATION "PROG" and restart the observation
--- UTC 04:29 Stop the observation (El ~ 12 deg)
*** Quick plots of today's measurements [#x4d1c84b]
- tx
&br;
&ref(20160825.strfx-0.png,,50%);
- ty
&br;
&ref(20160825.strfy-0.png,,50%);
*** Check Mac [#x8fd70f5]
-Tuning for DASH345 + MAC
+Start tuning on COSMOS GUI
--Group/Project/Filename: aste16/calib16/W51D3L
ASTE Environment Monitor 2016/08/25 04:36:06
===================================ASTE Site===================================
Temp. : -5.12 C Humid. : 16.32 % ( 0.68 hPa ) Solar : 0.00 kW/m2
Wind : 4.04 m/s 277 deg AirPressure : 572.52 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0158
================================ Receiver Cabin ===============================
Main Cabin: 15.7 C Upper Cabin: 8.4 C AzTEC AE: 168.6 C Dewar: 168.6 C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 12.64 degC Humid. : 5.77 %
Digital BE: 20.10 degC 25.30 degC 24.30 degC 22.30 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 13.60 C 13.70 C -6.10 C 15.50 C 2.00 C 13.80 C
Internal Ret. 15.70 C 13.90 C 14.90 C 15.20 C 14.60 C 13.30 C
External 168.60 C -11.20 C 6.30 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 1.40 degC 1.90 degC -11.30 degC
Room Temp.: 2.40 degC
+Adjust receiver and E/O
[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.536558376
---
Set ATT : Pol0=293, Pol1=286
Pol0 = 293 , Pol1 = 286
Pol0 = 0.007151[A], Pol1 = 0.006981[A]
Pol0 = 0.674667[V], Pol1 = 0.772949[V]
[asteobs@aste-1c ~]$ mmc1_rstop
[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
E/O att. = 16 dB E/O att. = 16 dB IF level=0.025008
new E/O att. = 16 dB IF level=0.025283
new E/O att. = 14 dB IF level=0.040710
new E/O att. = 16 dB IF level=0.022652
16 dB 0.022652 V
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
E/O att. = 15 dB IF level=0.061358
new E/O att. = 15 dB IF level=0.062246
new E/O att. = 16 dB IF level=0.046257
new E/O att. = 15 dB IF level=0.063095
new E/O att. = 16 dB IF level=0.046666
16 dB 0.046666 V
+
[asteobs@aste-1c ~]$ mmc1_sstop
[asteobs@aste-1c ~]$ yfactor 1
---
E/O att. = 16 dB
E/O IF level = 0.012388 V
R=0.025043 V, Sky=0.012388 V, Y=3.056852 dB
3.056852
[asteobs@aste-1c ~]$ yfactor 2
---
E/O att. = 16 dB
E/O IF level = 0.024676 V
R=0.049287 V, Sky=0.024676 V, Y=3.004576 dB
3.004576
+Tuning on COSMOS GUI Again
--Group/Project/Filename: aste16/calib16/W51D3L
-Observation for W51
--Group/Project/Filename: aste16/calib16/W51D3L
ASTE Environment Monitor 2016/08/25 05:04:12
===================================ASTE Site===================================
Temp. : -3.88 C Humid. : 11.73 % ( 0.54 hPa ) Solar : 0.00 kW/m2
Wind : 3.32 m/s 305 deg AirPressure : 572.42 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0441
================================ Receiver Cabin ===============================
Main Cabin: 15.3 C Upper Cabin: 9.6 C AzTEC AE: 168.6 C Dewar: 168.6 C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 13.82 degC Humid. : 5.38 %
Digital BE: 19.20 degC 22.80 degC 24.00 degC 22.40 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 13.80 C 14.90 C 15.10 C 16.20 C -9.90 C 14.80 C
Internal Ret. 15.90 C 15.00 C 15.80 C 15.80 C 15.50 C 14.00 C
External 168.60 C -9.30 C -0.30 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 1.10 degC 1.40 degC -10.70 degC
Room Temp.: 1.90 degC
--Qlook
#ref(./W51D3L-20160825.png,50%)
-Finish the observation
ASTE Environment Monitor 2016/08/25 05:21:37
===================================ASTE Site===================================
Temp. : -4.51 C Humid. : 11.11 % ( 0.49 hPa ) Solar : 0.00 kW/m2
Wind : 4.78 m/s 272 deg AirPressure : 572.35 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0137
================================ Receiver Cabin ===============================
Main Cabin: --- C Upper Cabin: --- C AzTEC AE: --- C Dewar: --- C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 13.86 degC Humid. : 5.28 %
Digital BE: 17.70 degC 20.39 degC 22.40 degC 21.60 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 13.60 C 15.50 C 15.90 C 16.20 C 13.70 C 15.00 C
Internal Ret. 16.00 C 15.20 C 16.10 C 15.80 C 15.40 C 14.00 C
External 168.60 C -12.00 C -5.00 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 0.90 degC 1.30 degC -12.60 degC
Room Temp.: 1.70 degC
*** Check WHSF [#x8fd70f5]
-Tuning for DASH345 + WHSF
+Start tuning on COSMOS GUI
--Group/Project/Filename: aste16/calib16/OCTD3L2
ASTE Environment Monitor 2016/08/25 05:36:30
===================================ASTE Site===================================
Temp. : -2.98 C Humid. : 8.79 % ( 0.43 hPa ) Solar : 0.00 kW/m2
Wind : 3.50 m/s 276 deg AirPressure : 572.17 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0665
================================ Receiver Cabin ===============================
Main Cabin: 16.2 C Upper Cabin: 10.4 C AzTEC AE: 168.6 C Dewar: 168.6 C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 13.62 degC Humid. : 5.19 %
Digital BE: 17.30 degC 19.70 degC 21.70 degC 21.00 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 13.70 C 14.30 C -6.50 C 15.60 C -8.80 C 15.30 C
Internal Ret. 15.90 C 14.60 C 15.10 C 15.40 C 15.00 C 13.80 C
External 168.60 C -11.10 C 6.10 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 0.60 degC 1.10 degC -10.90 degC
Room Temp.: 1.50 degC
+Adjust receiver and backend
[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 350.879327592
---
Set ATT : Pol0=309, Pol1=287
Pol0 = 309 , Pol1 = 287
Pol0 = 0.007543[A], Pol1 = 0.007006[A]
Pol0 = 0.674698[V], Pol1 = 0.771409[V]
[asteobs@aste-1c ~]$ whsf_tune S1USB S1LSB S2USB S2LSB
---
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
57.46 58.36 59.76 56.55 79.24 86.54 90.53 77.38 [mV]
***Set ATT***
S1USB:ATT_old = 18.25 [dB]
S1USB:ATT_new = 18.25 [dB]
S1LSB:ATT_old = 17.50 [dB]
S1LSB:ATT_new = 17.50 [dB]
S2USB:ATT_old = 17.25 [dB]
S2USB:ATT_new = 17.25 [dB]
S2LSB:ATT_old = 17.50 [dB]
S2LSB:ATT_new = 17.25 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
59.07 58.24 59.48 62.34 82.68 86.27 90.60 86.92 [mV]
[asteobs@aste-1c ~]$ whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2
---
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
56.70 57.83 58.91 59.44 88.95 84.69 88.98 85.17 [mV]
***Set ATT***
S1IFA:ATT_old = 6.50 [dB]
S1IFA:ATT_new = 6.50 [dB]
S1IFB:ATT_old = 5.50 [dB]
S1IFB:ATT_new = 5.25 [dB]
S2IFA:ATT_old = 6.75 [dB]
S2IFA:ATT_new = 6.75 [dB]
S2IFB:ATT_old = 7.00 [dB]
S2IFB:ATT_new = 7.00 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
57.26 57.81 59.07 59.92 89.55 91.15 88.98 86.26 [mV]
[asteobs@aste-1c ~]$ whsf_rsky
---
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
21.4 22.4 26.9 21.7 33.1 37.0 40.0 31.5 [mV]
Result: R-SKY
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
4.153 4.137 3.443 4.250 4.190 3.959 3.520 4.166 [dB]
Result: Tsys[Tamb=293K]
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
182.9 184.0 242.3 176.4 180.4 196.9 234.6 182.0 [K]
[asteobs@aste-1c ~]$ mmc1_rstop
[asteobs@aste-1c ~]$ mmc1_rstop
---
*** average ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
113.8 88.0 19.6 113.0 56.6 44.2 54.0 66.7 [mV]
*** stability ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
483.94 611.43 2893.89 481.23 965.01 1211.11 954.99 807.10 [%]
+Tuning on COSMOS GUI Again
--Group/Project/Filename: aste16/calib16/OCTD3L2
-Observation for OCT
--Group/Project/Filename: aste16/calib16/OCTD3L2
ASTE Environment Monitor 2016/08/25 05:56:02
===================================ASTE Site===================================
Temp. : -3.02 C Humid. : 8.77 % ( 0.43 hPa ) Solar : 0.00 kW/m2
Wind : 3.17 m/s 286 deg AirPressure : 572.12 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0440
================================ Receiver Cabin ===============================
Main Cabin: 16.2 C Upper Cabin: 10.4 C AzTEC AE: 168.6 C Dewar: 168.6 C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 13.34 degC Humid. : 5.15 %
Digital BE: 17.10 degC 19.30 degC 21.30 degC 20.70 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 13.60 C 14.10 C -6.90 C 15.40 C -10.10 C 15.20 C
Internal Ret. 15.80 C 14.40 C 14.90 C 15.10 C 14.80 C 14.20 C
External 168.60 C -11.50 C 5.90 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 0.60 degC 0.90 degC -11.50 degC
Room Temp.: 1.30 degC
--Qlook data~
&ref(./OCTD3L2-X1-20160825.png,50%);&ref(./OCTD3L2-X3-20160825.png,50%);
-Stop the observation
ASTE Environment Monitor 2016/08/25 06:32:33
===================================ASTE Site===================================
Temp. : -5.46 C Humid. : 12.54 % ( 0.51 hPa ) Solar : 0.00 kW/m2
Wind : 1.84 m/s 255 deg AirPressure : 572.02 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0155
================================ Receiver Cabin ===============================
Main Cabin: 16.9 C Upper Cabin: 10.1 C AzTEC AE: 168.6 C Dewar: 168.6 C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 13.63 degC Humid. : 5.09 %
Digital BE: 17.30 degC 19.60 degC 21.70 degC 20.90 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 14.00 C 15.30 C -5.40 C 16.10 C 13.90 C 16.00 C
Internal Ret. 16.20 C 15.10 C 15.50 C 15.70 C 15.40 C 14.70 C
External 168.60 C -12.20 C 4.00 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 0.10 degC 0.60 degC -12.30 degC
Room Temp.: 1.00 degC
* Rebooting analog BE from SPdA [#n185af03]
- operator: ytamura
- contact: yoichi.tamura on skype
- 11:14 UTC - WHSF stability measurement BEFORE rebooting analog BE
-- Trying whsf_stab 10
[asteobs@aste-1c ~]$ whsf_stab 10
Connection OPEN : Analog BE CTL
Connection OPEN : Analog BE OUT
*** average ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
47.3 55.9 -34.6 -8.2 -68.3 78.6 -44.2 26.2 [mV]
*** stability ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
1266.35 1029.74 -1767.57 -7333.26 -841.30 704.31 -1397.69 2103.27 [%]
-- Resulting in clearly strange status. ''Doesn't reproduce Izumi-san's results'' <== Ah, I forgot to do mmc1_rstop!!
-- What is the status of swbox? ==> OK, whsf should look at receiver output.
[asteobs@aste-1c ~]$ swbox_ctl_be
status: swbox_ctl_be WHSF
[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 0 0
400:P0-USB 402:P0-LSB
- 11:18 UTC - WHSF tuning
[asteobs@aste-1c ~]$ whsf_tune S1USB S1LSB S2USB S2LSB
:
:
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
58.88 56.93 58.64 62.48 93.81 89.69 88.05 92.54 [mV]
***Set ATT***
S1USB:ATT_old = 18.25 [dB]
S1USB:ATT_new = 18.25 [dB]
S1LSB:ATT_old = 17.50 [dB]
S1LSB:ATT_new = 17.50 [dB]
S2USB:ATT_old = 17.25 [dB]
S2USB:ATT_new = 17.25 [dB]
S2LSB:ATT_old = 17.25 [dB]
S2LSB:ATT_new = 17.25 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
58.81 57.06 58.81 62.22 93.62 90.12 88.49 91.79 [mV]
***Set ATT***
S1USB:ATT_old = 18.25 [dB]
S1USB:ATT_new = 18.25 [dB]
S1LSB:ATT_old = 17.50 [dB]
S1LSB:ATT_new = 17.50 [dB]
S2USB:ATT_old = 17.25 [dB]
S2USB:ATT_new = 17.25 [dB]
S2LSB:ATT_old = 17.25 [dB]
S2LSB:ATT_new = 17.25 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
58.94 57.10 58.86 62.51 93.86 90.15 88.52 92.60 [mV]
[asteobs@aste-1c ~]$ whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2
:
:
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
58.28 56.52 58.32 62.00 92.43 88.60 87.27 91.58 [mV]
***Set ATT***
S1IFA:ATT_old = 6.50 [dB]
S1IFA:ATT_new = 6.50 [dB]
S1IFB:ATT_old = 5.25 [dB]
S1IFB:ATT_new = 5.25 [dB]
S2IFA:ATT_old = 6.75 [dB]
S2IFA:ATT_new = 6.75 [dB]
S2IFB:ATT_old = 7.00 [dB]
S2IFB:ATT_new = 7.00 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
58.12 56.74 58.52 61.62 92.01 89.21 87.72 90.71 [mV]
***Set ATT***
S1IFA:ATT_old = 6.50 [dB]
S1IFA:ATT_new = 6.50 [dB]
S1IFB:ATT_old = 5.25 [dB]
S1IFB:ATT_new = 5.25 [dB]
S2IFA:ATT_old = 6.75 [dB]
S2IFA:ATT_new = 6.75 [dB]
S2IFB:ATT_old = 7.00 [dB]
S2IFB:ATT_new = 7.00 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
58.20 56.56 58.41 61.83 92.05 88.82 87.50 91.23 [mV] ==> looks good.
[asteobs@aste-1c ~]$ whsf_rsky
:
:
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
20.1 20.6 24.9 20.8 31.2 34.1 36.9 30.5 [mV]
Result: R-SKY
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
4.612 4.394 3.696 4.720 4.698 4.160 3.743 4.749 [dB]
Result: Tsys[Tamb=293K]
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
154.8 167.4 218.3 149.1 150.3 182.4 214.2 147.6 [K] ==> looks good.
[asteobs@aste-1c ~]$ mmc1_rstop
:
position 'R' verify ok.
:
[asteobs@aste-1c ~]$ whsf_stab 10
Connection OPEN : Analog BE CTL
Connection OPEN : Analog BE OUT
*** average ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
-76.0 -16.1 -87.5 -81.1 -98.9 -39.6 -133.1 3.9 [mV]
*** stability ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
-697.47 -2922.39 -546.61 -594.56 -497.07 -1327.70 -398.28 14020.6[%]
-- Again, the values are strange.
- 11:32 UTC - rebooting analog be
[asteobs@aste-1c ~]$ whsf_ae_sw REBOOT
***WHSF Analog BE: Power Off***
/cosmos3/naoj/bin/tap_sw2 lantap11 2 off
:
--- ffx-analog1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.208/0.238/0.297/0.044 ms
ping -c 3 ffx-analog2
PING ffx-analog2 (192.168.11.165) 56(84) bytes of data.
64 bytes from ffx-analog2 (192.168.11.165): icmp_seq=1 ttl=64 time=0.244 ms
64 bytes from ffx-analog2 (192.168.11.165): icmp_seq=2 ttl=64 time=0.360 ms
64 bytes from ffx-analog2 (192.168.11.165): icmp_seq=3 ttl=64 time=0.210 ms
--- ffx-analog2 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2000ms
rtt min/avg/max/mdev = 0.210/0.271/0.360/0.065 ms
[asteobs@aste-1c ~]$ whsf_ae_init
/cosmos3/naoj/bin/whsf_att S1USB 20
Connected to: IF module
ATT: S1USB 32.75 -> 20.00
/cosmos3/naoj/bin/whsf_att S1LSB 20
Connected to: IF module
ATT: S1LSB 32.75 -> 20.00
/cosmos3/naoj/bin/whsf_att S2USB 20
Connected to: IF module
ATT: S2USB 32.75 -> 20.00
/cosmos3/naoj/bin/whsf_att S2LSB 20
Connected to: IF module
ATT: S2LSB 32.75 -> 20.00
/cosmos3/naoj/bin/whsf_att X-IF1 15
Connected to: IF module
ATT: S1IFA 23.75 -> 15.00
/cosmos3/naoj/bin/whsf_att X-IF2 15
Connected to: IF module
ATT: S1IFB 23.75 -> 15.00
/cosmos3/naoj/bin/whsf_att Y-IF1 15
Connected to: IF module
ATT: S2IFA 23.75 -> 15.00
/cosmos3/naoj/bin/whsf_att Y-IF2 15
Connected to: IF module
ATT: S2IFB 23.75 -> 15.00
[asteobs@aste-1c ~]$ mmc1_rstop
[asteobs@aste-1c ~]$ whsf_stab 10
Connection OPEN : Analog BE CTL
Connection OPEN : Analog BE OUT
*** average ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
-39.9 -22.8 12.1 9.7 16.8 -36.4 10.5 21.5 [mV]
*** stability ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
-1113.12 -2132.19 4290.98 5746.68 3197.01 -1376.68 4968.032341.50 [%]
[asteobs@aste-1c ~]$
-- Again, still shows strange values.
* FMLO commissioning (ended in troubleshooting) [#s7b930b8]
- site: ASTE (sancho)
- operator: ytamura
** Tuning DASH345/MAC [#oe4157ff]
-14:15 UTC - dash345 tuning with a standard position switching obstable for Ori-KL / 12CO(3-2)
-- aste16/fmlo16/mORpsw.start
-- following the instruction: https://sites.google.com/site/asteobservation/home/tuning
$ yfactor 1
Y=3.410471 dB
$ yfactor 2
Y=3.579372 dB
==> looks good.
**Test observations (position switching) ==> trouble with spectra on QLOOK [#l22bf1b4]
-14:20 UTC - start observations
-- aste16/fmlo16/mORpsw.start
-- Again, a strange spectrum shows up!!!! ==> Check if the other table which succeeded in obtaining a correct spectrum...
-- Tsys = 164 K (A1), 227 K (A3), which looks normal.
- we have checked the contents of obstables, mORpsw.start and W51D3L.start, and found no intrinsic differences between the two. The latter of which has been confirmed to be the obstable that can obtain a correct spectrum toward W51. So I guess something goes wrong when tuning or spectrometer...
- 15:06 UTC - Tuning again...
-- aste16/fmlo16/mORpswH.start (MAC high resolution mode)
[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.592499544
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.592499544
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00
OK
> GET_CLNA 0 1
1.204971,10.063934,-0.278931,0.003265,0.013428,4.910355,0.003632,0.023346,4.910294,1
> GET_CLNA 0 2
1.204926,10.058746,-0.381989,0.003235,0.022125,-4.848419,0.004074,0.021667,4.910278,1
> GET_CLNA 1 1
1.206070,10.054321,-0.795670,0.003143,0.022583,-4.882126,0.003296,0.024719,-4.882095,1
> GET_CLNA 1 2
1.206665,10.086670,-0.301956,0.003708,0.018768,-4.881973,0.003433,0.013428,4.931610,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.592499544
351.592500 1.900000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7
Ver 0.91
>
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.900
OK
> SET_SIS_V 0 2 1.900
OK
> SET_SIS_V 1 1 1.900
OK
> SET_SIS_V 1 2 1.900
OK
> GET_SIS_VC 0 1
1.780090,65.039062
> GET_SIS_VC 0 2
1.783524,43.972778
> GET_SIS_VC 1 1
1.811600,53.851318
> GET_SIS_VC 1 2
1.815491,37.313843
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.592499544
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.592499544
/cosmos3/naoj/bin/loatt_dash345 292 286
Set ATT : Pol0=292, Pol1=286
Pol0 = 292 , Pol1 = 286
Pol0 = 0.007126[A], Pol1 = 0.006980[A]
Pol0 = 0.669619[V], Pol1 = 0.769562[V]
[asteobs@aste-1c ~]$ mmc1_rstop
:
position 'R' verify ok.
[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
E/O att. = 16 dB E/O att. = 16 dB IF level=0.023907
new E/O att. = 16 dB IF level=0.023919
new E/O att. = 14 dB IF level=0.038546
new E/O att. = 16 dB IF level=0.021504
16 dB 0.021504 V
[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
E/O att. = 16 dB IF level=0.049277
new E/O att. = 16 dB IF level=0.052443
new E/O att. = 17 dB IF level=0.039812
new E/O att. = 16 dB IF level=0.056705
16 dB 0.056705 V
[asteobs@aste-1c ~]$ mmc1_sstop
:
position 'SKY' verify ok.
[asteobs@aste-1c ~]$ yfactor 1
E/O att. = 16 dB
E/O IF level = 0.011251 V
R=0.024282 V, Sky=0.011251 V, Y=3.340933 dB
3.340933
[asteobs@aste-1c ~]$ yfactor 2
E/O att. = 16 dB
E/O IF level = 0.021536 V
R=0.051556 V, Sky=0.021536 V, Y=3.791142 dB
3.791142
--Check the status of swbox
[asteobs@aste-1c ~]$ swbox_ctl_be
status: swbox_ctl_be MAC
[asteobs@aste-1c ~]$ swbox_ctl_pol
status: swbox_ctl_pol 1 0
400:P1-LSB 402:P0-LSB
--Check IF converter Att levels
CH1: att = 7 dB
CH2: att = 6 dB
CH3: att = 6 dB
CH4: att = 5 dB
-- Try again running mORpswH.start (Ori-KL, MAC high, 345GHz, position switching) ==> ''Failed''
#ref(./Screenshot_160825_15h30s.png,50%)
-- ==> I just posted to aste-unyo 03658 and ask Okuda-san for support.
-16:50 UTC - Obstable test
-- aste16/calib16/W51test.start
--- This table is exactly the same as W51D3L.start, in which however the target coordinate is replaced with Ori-KL (because W51 has been set).
-- We see a similar abnormal spectrum again, suggesting no pleblem with obstables, device setups, computational permissions.
-17:20 UTC - Try WHSF tables
-- aste16/fmlo16/wIRpsw.start
--- 12CO, IRAS16293, DASH345/WHSF 4096MHz mode.
- tuning
-- asterx_set DASH345
Set ATT : Pol0=284, Pol1=285
Pol0 = 284 , Pol1 = 285
Pol0 = 0.006932[A], Pol1 = 0.006956[A]
Pol0 = 0.666939[V], Pol1 = 0.768849[V]
-- whsf_tune S1USB S1LSB S2USB S2LSB
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
37.97 36.64 37.58 33.93 7.04 6.78 10.87 10.10 [mV]
***Set ATT***
S1USB:ATT_old = 20.00 [dB]
S1USB:ATT_new = 18.25 [dB]
S1LSB:ATT_old = 20.00 [dB]
S1LSB:ATT_new = 18.00 [dB]
S2USB:ATT_old = 20.00 [dB]
S2USB:ATT_new = 18.00 [dB]
S2LSB:ATT_old = 20.00 [dB]
S2LSB:ATT_new = 17.75 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
57.06 62.04 59.76 53.72 12.75 12.08 16.89 15.37 [mV]
***Set ATT***
S1USB:ATT_old = 18.25 [dB]
S1USB:ATT_new = 18.25 [dB]
S1LSB:ATT_old = 18.00 [dB]
S1LSB:ATT_new = 18.00 [dB]
S2USB:ATT_old = 18.00 [dB]
S2USB:ATT_new = 18.00 [dB]
S2LSB:ATT_old = 17.75 [dB]
S2LSB:ATT_new = 17.50 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
57.54 61.99 59.69 58.44 12.62 12.08 16.87 16.62 [mV]
-- whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
56.98 61.99 59.70 57.71 12.71 12.09 16.87 16.40 [mV]
***Set ATT***
S1IFA:ATT_old = 15.00 [dB]
S1IFA:ATT_new = 6.75 [dB]
S1IFB:ATT_old = 15.00 [dB]
S1IFB:ATT_new = 6.50 [dB]
S2IFA:ATT_old = 15.00 [dB]
S2IFA:ATT_new = 7.75 [dB]
S2IFB:ATT_old = 15.00 [dB]
S2IFB:ATT_new = 7.75 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
56.61 61.92 59.60 57.40 84.36 85.83 75.24 72.88 [mV]
***Set ATT***
S1IFA:ATT_old = 6.75 [dB]
S1IFA:ATT_new = 6.50 [dB]
S1IFB:ATT_old = 6.50 [dB]
S1IFB:ATT_new = 6.50 [dB]
S2IFA:ATT_old = 7.75 [dB]
S2IFA:ATT_new = 7.00 [dB]
S2IFB:ATT_old = 7.75 [dB]
S2IFB:ATT_new = 7.00 [dB]
***Please wait a moment***
***TPD voltage***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
56.74 61.88 59.49 57.57 89.68 85.70 90.39 86.54 [mV]
-- whsf_rsky
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
37.0 31.4 35.9 36.7 46.5 44.3 54.7 55.4 [mV]
Result: R-SKY
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
1.879 2.950 2.227 1.976 2.854 2.863 2.218 1.948 [dB]
Result: Tsys[Tamb=293K]
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
541.4 301.3 437.4 508.6 315.3 313.9 439.6 517.6 [K]
-- mmc1_rstop
-- whsf_stab 10
*** average ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
-8.3 16.4 -70.7 35.2 4.6 2.4 -17.1 32.6 [mV]
*** stability ***
S1USB S1LSB S2USB S2LSB X-IF1 X-IF2 Y-IF1 Y-IF2
-7212.14 3504.98 -826.55 1732.96 12186.37 23613.68 -3498.48 1913.46 [%]
--- whsf_stab reports abnormal values, but we'll skip this. (aste-unyo 03653)
-- Start tuning from MNG GUI
- 17:32 UTC - start WHSF observation
-- Obstable: aste16/fmlo16/wIRpsw.start
-- Conditions:
ASTE Environment Monitor 2016/08/25 17:32:50
===================================ASTE Site===================================
Temp. : 7.69 C Humid. : 4.37 % ( 0.46 hPa ) Solar : 0.90 kW/m2
Wind : 6.34 m/s 234 deg AirPressure : 571.99 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0090
================================ Receiver Cabin ===============================
Main Cabin: 18.2 C Upper Cabin: 12.7 C AzTEC AE: 168.6 C Dewar: 168.6 C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 19.98 degC Humid. : 5.94 %
Digital BE: 21.70 degC 23.10 degC 25.50 degC 24.50 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 20.30 C -7.70 C 1.30 C 19.30 C 17.20 C 20.50 C
Internal Ret. 20.60 C 19.70 C 18.20 C -1.60 C 20.60 C 20.10 C
External 168.60 C 22.20 C 28.30 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 15.30 degC 15.20 degC 13.00 degC
Room Temp.: 16.50 degC
-- Result:
--- We again have a similar abnormal spectrum even with WHSF. (hmm..)
--- Tsys on QLOOK is too low (60 K and 29 K for X1 and X3, respectively) while whsf_rsky reports normal Tsys ~ 300-500 K. This is however predicted by Okudasan (aste-unyo 03653) because of whsf_stab trouble.
--- Let's give it another try to see if this happens again...
- 17:37 UTC - start WHSF observations (again)
-- Obstable: aste16/fmlo16/wIRpsw.start
-- Results:
--- Spectra of X1/X3 are abnormal.
--- Tsys on QLOOK are 299 K and 144 K for X1 and X3, respectively.
** Troubleshooting with Okuda-san [#d777564e]
- What YT, AT and TO did -
-- Execute obstable that is exactly the same as what was executed from MTK (W51D3L.start), but only a target (Ori-KL) is different because W51 is already set. ==> Show up ABNORMAL spectra on QLOOK at ASTE site
-- Taking WHSF data (without using COSMOS) ==> can see bandpass
-- Dump and display the MAC logging ==> show a CORRECT spectrum
-- See how qlsv (/sosmos3/astesyslog/astqlview) at ASTE site behaves ==> show many message with `dmy data set'
-- See how qlsv at MTK site behaves ==> no message with `dmy data set'
- &color(red,){''As a result, we conclude that QLOOK at ASTE site should go wrong, while the spectrometer data seem to be saved appropriately.''};
- A/I:
-- Okuda-san reports this trouble to FJ-ASTE ML.
-- YT will test whether the similar trouble happens at SPdA site (though I recognize that QLOOK at SPdA doesn't work -- the buttons labeled with A1-A4 cannot be pushed.)
* FMLO Commissioning (2nd round) [#p68dd04b]
** Attempts on receiving FMLO first light [#o473f8dd]
- 18:30 UTC - (Re)start FMLO commissioning - obstable/COSMOS test
- 18:52 UTC - Executing an obstable for first light ==> failed!
-- aste16/fmlo16/mIRp22.start
-- Troubleshoot:
--- Need to fix `DECIDE MANAGER START_TIME(1,4)' to `..(1,5)'
--- Need to add `EXECUTE SYN OFFSET((...)) TYPE(ON) SYNC_TIME(ANTENNA_G) SPAN(23:59:59)
--- Need to add `WAIT ACG' and `INTERRUPT SYN' right after `#EXECUTE ANTENNA_G OFFSET((...)) TYPE(TRAN) SPAN(..)' in the ON scan.
- &color(red,){Note that I just fixed the bug for the mIRp22.start on aste-1s, but I did not for all other tables. You need to update all of the obstables accordingly.};
- 19:32 UTC - Executing the first light obstable
-- aste16/fmlo16/mIRp22.start (bug-fixed)
-- I'm not sure if the correct data has been taken.
- 19:53 UTC - Executing the first light obsstable
-- aste16/fmlo16/mIRp22.start (bug-fixed)
-- This time maybe the data is OK.
-- The raw logging data and fmlolog were copied to asteobs@aste-1c:~/ytamura/testdata_160825/
- 20:01 UTC - Executing a longer table (600s) for timeoffset measurement
-- aste16/fmlo16/mIRp22.start (bug-fixed, 60s -> 600s)
-- I change the integration time from 60 s to 600 s.
- 20:25 UTC - Executing a longer table (600s) for timeoffset measurement
-- aste16/fmlo16/mIRp22.start (bug-fixed, 60s -> 600s)
-- Conditions:
ASTE Environment Monitor 2016/08/25 20:35:25
===================================ASTE Site===================================
Temp. : 6.61 C Humid. : 5.40 % ( 0.53 hPa ) Solar : 0.35 kW/m2
Wind : 10.48 m/s 257 deg AirPressure : 571.66 hPa ( Rain: 0.01 )
Opacity @220 GHz : 0.0510
================================ Receiver Cabin ===============================
Main Cabin: 18.8 C Upper Cabin: 14.4 C AzTEC AE: 168.6 C Dewar: 168.6 C
SCD : ---- ---- ---- ----
================================Observation Room===============================
Temp. : 18.57 degC Humid. : 5.79 %
Digital BE: 24.20 degC 29.10 degC 27.50 degC 25.10 degC
Meeting Rm.: Temp: room: ----- entrance: ----- WC: -----
-------------------------------Air Conditioners--------------------------------
Internal Out 19.20 C -8.69 C 16.50 C 20.10 C 17.50 C 20.50 C
Internal Ret. 20.70 C 18.60 C 18.80 C 13.50 C 19.10 C 20.10 C
External 168.60 C 19.39 C 17.30 C 168.60 C
================================Antenna Shelter================================
Air-cond. : 14.90 degC 14.70 degC 6.40 degC
Room Temp.: 16.60 degC
** Troubleshooting with W51D3L.start [#ne99a0a1]
-20:47 - W51D3L.start to confirm the trouble in QLOOK at ASTE site
-- aste16/calib16/W51D3L.start
-- start tuning
--- MAC IF converter Att = (ch1-4, respectively)
-- start observations
--- az,el = +69, 11
--- aspirin: clear
--- weather conditions: Tamb = +6 degC, humid = 6%, wind = 11 m/s, 260deg, tau220 = 0.06
--- &color(red,){We have ABNORMAL spectra on QLOOK (ASTE site) again even though the obstable was successful when it was run from MTK, confirming trouble with QLOOK on ASTE site!};
&ref(./Screenshot_160825_20h52.png,50%);
** Position switching obs for IRAS16293 [#mbfcfe8b]
-21:21 UTC - mIRpsw.start (position switching, 12CO, Mac/wide)
-- aste16/fmlo16/mIRpsw.start
-- az,el = +99, 71
-- Tsys = 171 K (A1), 594 K (A4)
* Finished observations [#pb83f92d]
- parked at home position +180, 60, placed to STBY.
- have released priority.
![[PukiWiki]](http://www2.nao.ac.jp/~aste-www/aste_wiki/obs.jpg "[PukiWiki]")
