Diff of Observing Log/2016-07-15 - ASTE Observation Wiki

The added line is THIS COLOR.
The deleted line is THIS COLOR.
Observing Log/2016-07-15 has been deleted.
Deleting diff of Observing Log/2016-07-15
#topicpath
#navi(Observing Log)

-&color(red){アンテナの状態と観測について};
-- JST 7/15 COSMOS Antenna consoleで interlockが表示されアンテナ制御ができません。GPIBエラーが継続して発生しており、現地で復旧作業予定です。本日は観測中止です。
-&color{red}{Filter wheel}
-&color{red}{Filter wheel};
-- ''xyscan, zscan, moonを除く指示書(ただし、指示書名に _fw を含むものは除く)では、天体に追いついた後にフィルターホイールを用いた測定を実行します。実際の観測開始まで2分程度かかるので、お待ちください。''
-- フィルターホイールの測定中は、teslc_check_process.sh で下記メッセージが表示されます。2分以上経過してもメッセージが表示される場合は tescam-obs に連絡して下さい。
 FW measurement is running. WAIT FOR ~ 2 MINUTES and TRY AGAIN.
  !!! FW IS BLOCKING THE LIGHT PATH. !!!
--- フィルターホイールの状態は、[[tescam monitor:http://nro.sakura.ne.jp/tescam_monitor_chile/]]の最上段に5分毎に更新されますので適宜確認をお願いします。観測中は、motor1、motor2 の両方で Position が 0deg にあるのが正常です。

----
-Contents
#contents

----
*Observing plan [#f4757e0d]
- check weather, webcam

- setup for observation
-- Restart COSMOS at site and local x 2
-- Check aspirin status. if Wind OFF, 
 asteobs@aste-1c: /cosmos3/naoj/bin/windsw off;/cosmos3/naoj/bin/windsw on  
 teslx3> p3
 teslx3> setup_for_observation.sh

- Skydip @El=60deg/filter wheel @El=90deg
-- skydip 
 skydip_az180_el60_mp10_v1800.start
-- still
-- El=90 degにmanualで駆動（Azは任意）
 still_az180_el60_t300.start
---所要時間 15min
 teslx3> nohup scripts/batch_fw_attenuation.sh; nohup scripts/batch_fw_loading.sh; nohup scripts/batch_still_dark.sh; nohup scripts/batch_still_light.sh; beep.sh
 # After finish the scripts(beep), tap following command and copy and paste the info(4 lines) to this Log.
 teslx3> tail -100 history.txt | grep batch | grep START | tail -4
 ex.) 
 ## 2016/06/20 10:45 (1466419550) UTC START batch_fw_attenuation.sh .
 ## 2016/06/20 10:47 (1466419664) UTC START batch_fw_loading.sh ..
 ## 2016/06/20 10:49 (1466419798) UTC START batch_still_dark.sh ..
 ## 2016/06/20 10:55 (1466420141) UTC START batch_still_light.sh ..

- Mars Beammap
-- beam map
 mars_azel_raster_1080x720_d6_t6 (20 min)

//- Mars beammap with xyz focus
//mars_azel_raster_1080x720_d6_t4_xm15yp00.start
//mars_azel_raster_1080x720_d6_t4_xp00ym15.start
//mars_azel_raster_1080x720_d6_t4_xp00yp00.start
//mars_azel_raster_1080x720_d6_t4_xp00yp15.start
//mars_azel_raster_1080x720_d6_t4_xp15yp00.start
//(platanoから転送してない)
//mars_azel_raster_1080x720_d6_t4_zp05.start
//mars_azel_raster_1080x720_d6_t4_zm05.start

- Mars XYZ-scan band1/2 (UTC < 2)
-- batch mode
 mars_xyzscan_20160629.list
-- Repeat z-scan and xy-scan batch if < El 85 deg
-- contents
 mars_zscan_b1_ch055_v05_n2_rtn_pattern6.start 
 mars_zscan_b2_ch094_v05_n2_rtn_pattern6.start 
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm20yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm10yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp10yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp20yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym20.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym10.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp10.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp20.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
 mars_zscan_b1_ch086_v05_n2_rtn_pattern6.start 
 mars_zscan_b2_ch045_v05_n2_rtn_pattern6.start 
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm20yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm10yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp10yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp20yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym20.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym10.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp10.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp20.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start


- Skydip @El=60deg/filter wheel @El=90deg (UTC = 1 - 1.5)
-- skydip 
 skydip_az180_el60_mp10_v1800.start
-- still
 still_az180_el60_t300.start
-- Filter wheel measurement
--- El=90 degにmanualで駆動（Azは任意）
 teslx3> nohup scripts/batch_fw_attenuation.sh; nohup scripts/batch_fw_loading.sh; beep.sh
 After finish the scripts(beep), tap following command and copy and paste the info. to this Log.
 teslx3> tail -100 history.txt | grep fw | grep START | tail -2


- Mars XYZ-scan band1/2 (UTC 1.5-)
-- batch mode
 mars_xyzscan_20160629.list
-- Repeat z-scan and xy-scan batch if El < 32-33 deg
-- contents
 mars_zscan_b1_ch055_v05_n2_rtn_pattern6.start 
 mars_zscan_b2_ch094_v05_n2_rtn_pattern6.start 
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm20yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm10yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp10yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp20yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym20.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym10.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp10.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp20.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
 mars_zscan_b1_ch086_v05_n2_rtn_pattern6.start 
 mars_zscan_b2_ch045_v05_n2_rtn_pattern6.start 
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm20yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xm10yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp10yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp20yp00.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym20.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00ym10.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp10.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp20.start
 mars_xyscan_b1ch058_b2ch027_azel_raster_480x96_d6_t6_xp00yp00_fw.start

- Mars beammap (UTC 5.5-6)
-- beam map
 mars_azel_raster_1080x720_d6_t6 (20 min)

- Pointing (UTC 6-)
-- UTC < 8:30
 G10.62_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start
 繰り返し
-- UTC < 10:00
 J1924-292_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start
 J2253-161_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start

 繰り返し
- Uranus  (UTC = 10-11h)
-- beam map
 uranus_azel_raster_1080x720_d6_t18 (50 min)

- Pointing
-- UTC < 11:30
 PKS0537-441_pointing_b1ch058_b2ch027_azel_raster_240x96_d3_t16.start
 uranus_
 neptune_



//- NGC6334I/GC/SgrB2 (UTC 6.5-9)
// gc_raster_lb_7200x720_v600_lp720.start (40min)
// gc_raster_lb_7200x720_v600_lm720.start (40min)
// ngc6334i_lissajous_330_v150 (40min)
// gc_raster_lb_7200x720_v600_lp720.start (40min)
// gc_raster_lb_7200x720_v600_lm720.start (40min)
// sgrb2_radec_lissajous_330_v150.start (40min)


- Still/Skydip @El=60deg/filter wheel @El=90deg (UTC = 11:30 -12)
-- still
 still_az180_el60_t300.start
-- skydip 
 skydip_az180_el60_mp10_v1800.start
-- El=90 degにmanualで駆動（Azは任意）
--- 各script の所要時間 ~ 5min
 teslx3> nohup scripts/batch_fw_attenuation.sh; nohup scripts/batch_fw_loading.sh; nohup scripts/batch_still_dark.sh; nohup scripts/batch_still_light.sh; beep.sh
 After finish the scripts(beep), tap following command and copy and paste the info. to this Log.
 teslx3> tail -100 history.txt | grep batch | grep START | tail -4

- HOME
-- Az, El = (180, 30)

----
* Morning shift [#nb379ca5]
- site: Mitaka
- Operator : M. Yamaguchi

 Subref coordinates are not still loaded. Therefore,  observation doesn't start.
----
* Afternoon shift [#x5322560]
- Site: 
- Operator : 
----
* Evening shift [#i6cb8a0a]
- Site: 
- Operator :