Diff of Observing Log/2011-04-26 - ASTE Observation Wiki

The added line is THIS COLOR.
The deleted line is THIS COLOR.
Observing Log/2011-04-26 has been deleted.
Deleting diff of Observing Log/2011-04-26
[[Observing Log]]

#contents()

* Observing plan [#x39721d8]
* Observations from NRO [#x39721d8]
- Observers
-- Takashi Tsukagoshi, Junko Ueda, Ayako Tanaka, Mitsuhiro Matsuo
- Contacts
-- Skype:tsuka_takac, jnk.ueda 

* トラブル報告 [#l7a6bfe7]
- continuum backend 関係
-- 観測を流すと、manager GUI上に'Input signal saturated'のwarningが表示される
-- calibration時の値は、cal_R~12000, cal_sky~6000
-- 対処方法1 : dasbox のリスタート
    astecntl@aste-2c:dasbox_sw restart
-- 対処方法2 : gain 調整
    astecont@aste-2c: preset gain
    11, 12, 13chで実行
    最初のパラメータのみ2で他は0
-- 上記作業後はcal_R~6000, cal_sky~3000くらい
-- warningは表示されなくなった

- subref 関係
-- subrefのX,Y,Zの値がコンソールに表示されない
-- 対処方法 : aste-1c の reboot 

- アンテナコンソール上LOCALの赤ランプ
-- コンソール左上のLOCALに赤ランプが点灯
-- COSMOS restart(全サイト)でも改善せず
-- 副鏡制御架との通信で出てた記憶があったので、通信を確認 --> 問題なし
-- 観測自体は問題なく走るので、そのまま測定を開始。現在もランプ点灯中。

* Observing log [#b458b0f8]

** Taking a beam map for health check [#w2b5535d]

- UT 22:10
-- restart COSMOS 
-- comuunication of COSMOS is down
-- restart COSMOS @ aste-at3, aste-mt2, aste-w

- UT 22:31 - taking a beam map for health check
-- Obstable:str2c3.start
-- (AZ, EL) = (84,21)
-- (dAZ, dEL) = (0.0, 0.0)
-- (X,Y,Z) = (0.0, 0.0, 0.0) --> subref の値が読めていない
-- (dX,dY,dZ) = (0.0, 0.0, 0.0)
-- Conditions (envmon):
  Temp. :  -0.09 C   Humid. : 12.98 % (  0.79 hPa )   Solar :  0.00 kW/m2
  Wind  :   1.44 m/s  199 deg   AirPressure : 571.50 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0639
-Results:
--image
#ref(C104252205.png)

- UT 22:35 
-- restart COSMOS due to the network trouble
-- 'LOCAL' lamp on the antenna console window が点灯している
-- reboot aste-1c
-- --> 'LOCAL' lamp は点灯したまま
-- --> subref の値は表示されるようになった

** Focus measurements [#x5ab15c2]
- UT 23:18 - 1st pointing obs.
-- Obstable:stsbc3a.start
-- (AZ, EL) = (78,32)
-- (dAZ, dEL) = (0.0, 0.0 )
-- (dX,dY,dZ) = (0.0, 0.0, 0.0 )
-- Conditions (envmon):
  Temp. :  -0.80 C   Humid. : 14.97 % (  0.86 hPa )   Solar :  0.00 kW/m2
  Wind  :   2.28 m/s  106 deg   AirPressure : 571.67 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0631

- error message 'CONT_BE:WARNING CONT(101) Input signal saturated' on the MGUI window

- UT 23:18 - running batch
-- Obstable:stsbc3.list
-- (AZ, EL) = (77,33)
-- (dAZ, dEL) = (-1.0, 4.2 )
-- (X,Y,Z) = ( 6.15, -2.53, 1.5 )
-- (dX,dY,dZ) = (0.0, 0.0, 0.0 )
-- Conditions (envmon):
  Temp. :  -0.95 C   Humid. : 16.76 % (  0.96 hPa )   Solar :  0.00 kW/m2
  Wind  :   4.16 m/s  207 deg   AirPressure : 571.65 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :      ---
- error message 'CONT_BE:WARNING CONT(101) Input signal saturated' on the MGUI window

- UT 00:15
-- restart dasbox and reset preset gain

- UT 00:25
-- Obstable:stsbc3.list
-- (AZ, EL) = (68,46)
-- (dAZ, dEL) = (-1.032, 4.150)
-- (X,Y,Z) = (5.50, -2.53, 1.91)
-- (dX,dY,dZ) = (0.0, 0.0, 0.0)
-- Conditions (envmon):
  Temp. :  -2.04 C   Humid. : 19.16 % (  1.01 hPa )   Solar :  0.00 kW/m2
  Wind  :   5.27 m/s  313 deg   AirPressure : 572.17 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :      ---   Tsys : 227K 
-- error message 'CONT_BE:WARNING CONT(101) Input signal saturated' は表示されなくなった

- UT 00:46  Stop (communication error)

- UT 01:11 restart
-- Obstable:stsbc3.list
-- (AZ, EL) = (57,55)
-- (dAZ, dEL) = (-0.950, 0.831)
-- (X,Y,Z) = (3.72, -2.53, -2.68)
-- (dX,dY,dZ) = (0.0, 0.0, 0.0)
-- Conditions (envmon):
  Temp. :  -1.46 C   Humid. : 19.36 % (  1.06 hPa )   Solar :  0.00 kW/m2
  Wind  :   0.93 m/s   16 deg   AirPressure : 572.40 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :      ---    Tsys : 245K

- UT 01:42  Stop 

- UT 01:50 restart (stop --> start obs)
-- stsbc3e.list から始めた

- UT 02:11
-- Obstable:stsbc3.list
-- (AZ, EL) = (34,65)
-- (dAZ, dEL) = (1.190, 1.518)
-- (X,Y,Z) = (4.13, -4.53, -2.59)
-- (dX,dY,dZ) = (0.0, 0.0, 0.0)
-- Conditions (envmon):
  Temp. :  -2.09 C   Humid. : 15.97 % (  0.84 hPa )   Solar :  0.00 kW/m2
  Wind  :   2.68 m/s  299 deg   AirPressure : 572.43 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :      ---   Tsys : 194K

- UT 02:40   Stop  (communication error)

-UT 02:47 restart
-- Obstable:stsbc3.list
-- stsbc3a.list から始めた
-- (AZ, EL) = (11,68)
-- (dAZ, dEL) = (1.190, 1.518)
-- (X,Y,Z) = (3.88, -2.53, -2.56)
-- (dX,dY,dZ) = (0.0, 0.0, 0.0)
-- Conditions (envmon):
  Temp. :  -2.11 C   Humid. : 15.80 % (  0.83 hPa )   Solar :  0.00 kW/m2
  Wind  :   3.60 m/s  339 deg   AirPressure : 572.41 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :      ---     Tsys : 202K

-UT 03:43 Stop  (communication error)


-UT 03:52 restart
-- Obstable:stsbc3.list
-- stsbc3h.list から始めた
-- (AZ, EL) = (-31,66)
-- (dAZ, dEL) = (2.561, 0.064)
-- (X,Y,Z) = (4.10, -1.53, -2.58)
-- (dX,dY,dZ) = (0.0, 0.0, 0.0)
-- Conditions (envmon):
  Temp. :  -3.70 C   Humid. : 16.96 % (  0.79 hPa )   Solar :  0.00 kW/m2
  Wind  :   2.48 m/s  306 deg   AirPressure : 572.47 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :      ---   Tsys : 183K

** pointing [#r33ed3e2]
-UT 04:28
-- Obstable:stx5cc3.start
-- (AZ, EL) = (-48,60)
-- (dAZ, dEL) = (0.000, 0.000)
-- (X,Y,Z) = (4.55, -2.53, -2.66)
-- (dX,dY,dZ) = (0.0, 0.0, 0.0)
-- Conditions (envmon):
  Temp. :  -2.29 C   Humid. : 13.41 % (  0.69 hPa )   Solar :  0.00 kW/m2
  Wind  :   2.94 m/s  288 deg   AirPressure : 572.38 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :      ---   Tsys : 191K
-- Aspirin status (Asprin Blue) : wind on
  aste-1c(aste-wx1→aste-wx2→aste-mt2→aste-at3i→aste-1c)に入り
  aste-1c{asteobs}51: /cosmos3/aste/nro/sbin/windsw on [return]
  > Aspirin correction for wind is ON
  Asprin Monitor でも確認。
  ** WIND ON ** ( C22:on  C6:OFF WIND:on )

-UT 05:33
-- (AZ, EL) = (-65,48)
-- (dAZ, dEL) = (5.88, -6.90)
-- (X,Y,Z) = (5.37, -2.53, -2.84)
-- (dX,dY,dZ) = (0.0, 0.0, 0.0)
-- Conditions (envmon):
  Temp. :  -2.31 C   Humid. : 11.98 % (  0.62 hPa )   Solar :  0.00 kW/m2
  Wind  :   6.03 m/s  308 deg   AirPressure : 572.05 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :      0.0493   Tsys : 205K

** Focus measurements [#x5ab15c2]
- UT 06:12
-- Obstable:stsbc3.start
-- (AZ, EL) = (-72,40)
-- (dAZ, dEL) = (1.122, 3.385 )
-- (X,Y,Z) = (5.87, -2.53, 8.03 )
-- (dX,dY,dZ) = (0.0, 0.0, 0.0 )
-- Conditions (envmon):
  Temp. :  -4.06 C   Humid. : 13.08 % (  0.59 hPa )   Solar :  0.00 kW/m2
  Wind  :   4.20 m/s  312 deg   AirPressure : 571.61 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :      ---   Tsys = 223K

-UT 06:40 Stop

-UT 06:47 restart
-- Obstable:stsbc3.list
-- stsbc3e.list から始めた
-- (AZ, EL) = (-77,31)
-- (dAZ, dEL) = (-2.021, 1.950)
-- (X,Y,Z) = (6.24, -2.53, -3.15)  X limit
-- (dX,dY,dZ) = (0.0, 0.0, 0.0)
-- Conditions (envmon):
  Temp. :  -2.92 C   Humid. : 11.68 % (  0.58 hPa )   Solar :  0.00 kW/m2
  Wind  :   6.27 m/s  313 deg   AirPressure : 571.32 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0490    Tsys 260K

-UT 07:49 
-- Obstable:stsbc3.list
-- stsbc3c.list から
-- (AZ, EL) = (-84,18)
-- (dAZ, dEL) = (-0.031, 2.347)
-- (X,Y,Z) = (4.71, -2.53, -3.47) 
-- (dX,dY,dZ) = (0.0, 0.0, 0.0)
-- Conditions (envmon):
  Temp. :  -4.82 C   Humid. : 15.47 % (  0.66 hPa )   Solar :  0.00 kW/m2
  Wind  :   2.49 m/s  270 deg   AirPressure : 571.23 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :      ---    Tsys=324K

-UT 08:01 X limit
-- (X,Y,Z) = (6.77, -2.53, -3.52)

-UT 08:45 finish
------------------------------------------------------------

*Reduction結果 (Subref Measurement)[#h89d0406]

**Y fit [#h77b3a70]
#ref(C10425-6sub.sbrfy_0.png) 
#ref(C10425-6sub.sbrfy_1.png) 
#ref(C10425-6sub.sbrfy_2.png) 
#ref(C10425-6sub.sbrfy_3.png)

**X fit [#z44e0b79]
#ref(C10425-6sub.sbrfx_0.png)
#ref(C10425-6sub.sbrfx_1.png)
#ref(C10425-6sub.sbrfx_2.png)
#ref(C10425-6sub.sbrfx_3.png)

** EL vs. Subref Offset [#g0dc388e]
*** EL-dX [#k8365e55]
#ref(C10425-6sub_C10425-6sub.sbrfx2.png)

*** EL-dY [#n816286c]
#ref(C10425-6sub_C10425-6sub.sbrfy2.png)

*** EL-dZ [#nc3021f5]
#ref(C10425-6sub_C10425-6sub.sbrfz.png)

*Reduction結果 (Pointing) [#se237dc9]

- dAZ vs AZ
#ref(C104260438_C104260438.dazdel.dAZvsAZ.png)
- dAZ vs EL
#ref(C104260438_C104260438.dazdel.dAZvsEL.png)
- dEL vs AZ
#ref(C104260438_C104260438.dazdel.dELvsAZ.png)
- dEL vs EL
#ref(C104260438_C104260438.dazdel.dELvsEL.png)