History of Open-use_program/sample_scan_tables (No. 3)

• History
• View the diff.
• View the diff current.
• View the source.
• Go to Open-use_program/sample_scan_tables.
  • 1 (2025-06-10 (Tue) 21:41:21)
  • 2 (2025-06-10 (Tue) 22:00:37)
  • 3 (2025-06-11 (Wed) 19:19:01)

ASTE Wiki

Open-use program > sample scan tables†

What's this page?

This page provides sample scan tables.

Revision history

• 2025-06-10 - created

Table of contents

• Open-use program > sample scan tables
  • Sample scan tables
    • For DASH345 standard sources (2'x2', x scan, 20-30min)
    • For CAT8W standard sources (2'x2', x scan, 20-30min)
    • Tips:

Sample scan tables†

For DASH345 standard sources (2'x2', x scan, 20-30min)†

For CAT8W standard sources (2'x2', x scan, 20-30min)†

Tips:†

1. Set the 'Calibration Integration Time' equal to the OFF position Integration time
2. Set the 'Interval' to be 15-20min by estimating the time for 1 scan. (e.g., if Total time per one map = 60min and the number of scans = 60, the time for 1 scan = 1min. Thus, 15-20min corresponds to 15-20 scans. So input 15-20 as 'Interval')
3. You can find appropriate OFF position Integration time and Calibration interval from HERE.