History of Observing Log/2016-11-13(No. 3)

History
View the source.
Observing Log/2016-11-13 has been deleted.
- 1 (2016-11-13 (Sun) 11:45:58)
- 2 (2016-11-13 (Sun) 14:53:57)
- 3 (2016-11-13 (Sun) 20:39:59)

Shm_error
- observer info
A16016
- observer info

Shm_error†

[asteobs@aste-1c ~]$ 2016/11/12 11:47:45 ERROR   shm_pressure : serial_read( 1  chars ) timeout
2016/11/12 11:47:45 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 11:47:45 ERROR   shm_pressure : Failed to read data
2016/11/12 11:47:45 WARNING  shm_pressure : pressure read retry
2016/11/12 12:01:48 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 12:01:48 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 12:01:48 ERROR   shm_pressure : Failed to read data
2016/11/12 12:01:48 WARNING  shm_pressure : pressure read retry
2016/11/12 12:32:30 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 12:32:30 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 12:32:30 ERROR   shm_pressure : Failed to read data
2016/11/12 12:32:30 WARNING  shm_pressure : pressure read retry
2016/11/12 12:46:40 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 12:46:40 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 12:46:40 ERROR   shm_pressure : Failed to read data
2016/11/12 12:46:40 WARNING  shm_pressure : pressure read retry
2016/11/12 12:53:56 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 12:53:56 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 12:53:56 ERROR   shm_pressure : Failed to read data
2016/11/12 12:53:56 WARNING  shm_pressure : pressure read retry
2016/11/12 12:54:32 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 12:54:32 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 12:54:32 ERROR   shm_pressure : Failed to read data
2016/11/12 12:54:32 WARNING  shm_pressure : pressure read retry
2016/11/12 13:10:14 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 13:10:14 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 13:10:14 ERROR   shm_pressure : Failed to read data
2016/11/12 13:10:14 WARNING  shm_pressure : pressure read retry
2016/11/12 13:23:05 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 13:23:05 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 13:23:05 ERROR   shm_pressure : Failed to read data
2016/11/12 13:23:05 WARNING  shm_pressure : pressure read retry
2016/11/12 13:30:34 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 13:30:34 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 13:30:34 ERROR   shm_pressure : Failed to read data
2016/11/12 13:30:34 WARNING  shm_pressure : pressure read retry
2016/11/12 15:07:05 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 15:07:05 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 15:07:05 ERROR   shm_pressure : Failed to read data
2016/11/12 15:07:05 WARNING  shm_pressure : pressure read retry
2016/11/12 16:35:03 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 16:35:03 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 16:35:03 ERROR   shm_pressure : Failed to read data
2016/11/12 16:35:03 WARNING  shm_pressure : pressure read retry
2016/11/12 18:11:34 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 18:11:34 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 18:11:34 ERROR   shm_pressure : Failed to read data
2016/11/12 18:11:34 WARNING  shm_pressure : pressure read retry
2016/11/12 18:29:54 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 18:29:54 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 18:29:54 ERROR   shm_pressure : Failed to read data
2016/11/12 18:29:54 WARNING  shm_pressure : pressure read retry
2016/11/12 19:16:09 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 19:16:09 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 19:16:09 ERROR   shm_pressure : Failed to read data
2016/11/12 19:16:09 WARNING  shm_pressure : pressure read retry
2016/11/12 19:26:36 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 19:26:36 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 19:26:36 ERROR   shm_pressure : Failed to read data
2016/11/12 19:26:36 WARNING  shm_pressure : pressure read retry
2016/11/12 19:53:08 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 19:53:08 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 19:53:08 ERROR   shm_pressure : Failed to read data
2016/11/12 19:53:08 WARNING  shm_pressure : pressure read retry
2016/11/12 20:55:09 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 20:55:09 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 20:55:09 ERROR   shm_pressure : Failed to read data
2016/11/12 20:55:09 WARNING  shm_pressure : pressure read retry
2016/11/12 20:57:30 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 20:57:30 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 20:57:30 ERROR   shm_pressure : Failed to read data
2016/11/12 20:57:30 WARNING  shm_pressure : pressure read retry
2016/11/12 20:57:45 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 20:57:45 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 20:57:45 ERROR   shm_pressure : Failed to read data
2016/11/12 20:57:45 WARNING  shm_pressure : pressure read retry
2016/11/12 21:00:06 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 21:00:06 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 21:00:06 ERROR   shm_pressure : Failed to read data
2016/11/12 21:00:06 WARNING  shm_pressure : pressure read retry
2016/11/12 21:34:25 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 21:34:25 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 21:34:25 ERROR   shm_pressure : Failed to read data
2016/11/12 21:34:25 WARNING  shm_pressure : pressure read retry
2016/11/12 21:37:58 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 21:37:58 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 21:37:58 ERROR   shm_pressure : Failed to read data
2016/11/12 21:37:58 WARNING  shm_pressure : pressure read retry
2016/11/12 22:07:28 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 22:07:28 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 22:07:28 ERROR   shm_pressure : Failed to read data
2016/11/12 22:07:28 WARNING  shm_pressure : pressure read retry
Invalid data (year) : current 47 while cadac 0
2016/11/12 22:10:51 WARNING  shm_cadac : Error in cadad21_read_data() : skip OK
DS,0584,2155/55/55,55:55:55.5,00,-9.3217,27,01,-9.3217,27,02,-9.3217,27,03,-9.3217,27,04,-9.3217,27,05,-9.3217,27,06,-9321.7,27,07,- 9321.7,27,08,-9321.7,27,09,-9321.7,27,10,-9321.7,27,11,-9321.7,27,12,-9321.7,27,13,-9321.7,27,14,-9321.7,27,15,-9321.7,27,16,- 9321.7,27,17,-9321.7,27,18,-9321.7,27,19,-9321.7,27,20,-9321.7,27,21,-9321.7,27,22,-9321.7,27,23,-9321.7,27,24,-9321.7,27,25,-9321.7,27,26,-9321.7,27,27,-9.3217,27,28,-9.3217,27,29,-9.3217,27,30,-9.3217,27,31,-9.3217,27,32,-9.3217,27,33,-9.3217,27,34,-9.3217,27,35,-9.3217,27,36,-9.3217,27,37,-9.3217,27,38,-9.3217,27,39,-9.3217,27
END
 
2016/11/12 22:25:34 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 22:25:34 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 22:25:34 ERROR   shm_pressure : Failed to read data
2016/11/12 22:25:34 WARNING  shm_pressure : pressure read retry
2016/11/12 22:25:50 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 22:25:50 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 22:25:50 ERROR   shm_pressure : Failed to read data
2016/11/12 22:25:50 WARNING  shm_pressure : pressure read retry
2016/11/12 23:02:20 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 23:02:20 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 23:02:20 ERROR   shm_pressure : Failed to read data
2016/11/12 23:02:20 WARNING  shm_pressure : pressure read retry
2016/11/12 23:24:04 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 23:24:04 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 23:24:04 ERROR   shm_pressure : Failed to read data
2016/11/12 23:24:04 WARNING  shm_pressure : pressure read retry
2016/11/12 23:33:31 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 23:33:31 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 23:33:31 ERROR   shm_pressure : Failed to read data
2016/11/12 23:33:31 WARNING  shm_pressure : pressure read retry
2016/11/12 23:44:17 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/12 23:44:17 ERROR   shm_pressure : Read error (serial_read2)
2016/11/12 23:44:17 ERROR   shm_pressure : Failed to read data
2016/11/12 23:44:17 WARNING  shm_pressure : pressure read retry
2016/11/13 00:11:43 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 00:11:43 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 00:11:43 ERROR   shm_pressure : Failed to read data
2016/11/13 00:11:43 WARNING  shm_pressure : pressure read retry
2016/11/13 00:48:26 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 00:48:26 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 00:48:26 ERROR   shm_pressure : Failed to read data
2016/11/13 00:48:26 WARNING  shm_pressure : pressure read retry
2016/11/13 00:50:33 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 00:50:33 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 00:50:33 ERROR   shm_pressure : Failed to read data
2016/11/13 00:50:33 WARNING  shm_pressure : pressure read retry
2016/11/13 00:54:59 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 00:54:59 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 00:54:59 ERROR   shm_pressure : Failed to read data
2016/11/13 00:54:59 WARNING  shm_pressure : pressure read retry
2016/11/13 01:03:21 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 01:03:21 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 01:03:21 ERROR   shm_pressure : Failed to read data
2016/11/13 01:03:21 WARNING  shm_pressure : pressure read retry
2016/11/13 01:36:01 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 01:36:01 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 01:36:01 ERROR   shm_pressure : Failed to read data
2016/11/13 01:36:01 WARNING  shm_pressure : pressure read retry
2016/11/13 02:13:57 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 02:13:57 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 02:13:57 ERROR   shm_pressure : Failed to read data
2016/11/13 02:13:57 WARNING  shm_pressure : pressure read retry
2016/11/13 02:19:21 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 02:19:21 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 02:19:21 ERROR   shm_pressure : Failed to read data
2016/11/13 02:19:21 WARNING  shm_pressure : pressure read retry

But Environ and aspirin monitors seemed to work without problems...

↑

observer info†

izumi natsuko
skype: izumi.natsuko

↑

UTC0250 Stop COSMOS 3†

[asteobs@aste-1c ~] sudo /cosmos3/naoj/sbin/cos3_cntl stop all

↑

UTC0250 Reboot aste-1c†

[asteobs@aste-1c ~]$ su
Password: 
[root@aste-1c asteobs]# su halt

***** System shutdown procedure *****

 02:54:06 up 23:01,  1 user,  load average: 0.26, 0.14, 0.04
USER     TTY      FROM              LOGIN@   IDLE   JCPU   PCPU WHAT
asteobs  pts/0    aste-mx1         Sat03    0.00s  0.03s  0.00s sshd: asteobs [

Shutdown OK ? (y/n/r=reboot): r

System reboot

Broadcast message from asteobs@aste-1c
	(/dev/pts/0) at 2:54 ...

The system is going down for reboot NOW!
[root@aste-1c asteobs]# Connection to aste-1c closed by remote host.
Connection to aste-1c closed.

↑

UTC0255 COSMOS3 restart†

[asteobs@aste-1c ~]$ sudo /cosmos3/naoj/sbin/cos3_cntl restart all

↑

UTC0300 Restart remote-site (MITAKA) COSMOS3 and its connections to the ASTE site on a remote site†

[asteobs@aste-mx1 Desktop]$ssh -t aste-mt1 "sudo /cosmos3/naoj/sbin/cos3_cntl restart"

↑

ERROR message†

[asteobs@aste-1c ~]$ 2016/11/13 03:10:18 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 03:10:18 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 03:10:18 ERROR   shm_pressure : Failed to read data
2016/11/13 03:10:18 WARNING  shm_pressure : pressure read retry

↑

UTC0315 Restart Envmon†

[asteobs@aste-1c ~]$ ssh aste-v1c "/opt/sudo/bin/sudo /cosmos3/naoj/rc3.d/S99astnaojd stop; nohup /opt/sudo/bin/sudo /cosmos3/naoj/rc3.d/S99astnaojd start"

Restart did not finished...

↑

ERROR message†

2016/11/13 03:26:23 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/13 03:26:23 ERROR shm_pressure : Read error (serial_read2) 2016/11/13 03:26:23 ERROR shm_pressure : Failed to read data 2016/11/13 03:26:23 WARNING shm_pressure : pressure read retry

↑

UTC0325 Restart Aspirin†

[asteobs@aste-1c ~] ssh -t aste-1c "sudo /cosmos3/naoj/rc3.d/S99astnaojd stop; nohup sudo /cosmos3/naoj/rc3.d/S99astnaojd start"

Aspirin monitor did not work...

↑

UTC0330 Restart remote-site (MITAKA) COSMOS3 and its connections to the ASTE site on a remote site†

[asteobs@aste-mx1 Desktop]$ssh -t aste-mt1 "sudo /cosmos3/naoj/sbin/cos3_cntl restart"

↑

UTC0335 Restart Envmon†

[asteobs@aste-1c ~]$ ssh aste-v1c "/opt/sudo/bin/sudo /cosmos3/naoj/rc3.d/S99astnaojd stop; nohup /opt/sudo/bin/sudo /cosmos3/naoj/rc3.d/S99astnaojd start"

Restart did not finished...

↑

UTC0339 Restart Aspirin†

[asteobs@aste-1c ~] ssh -t aste-1c "sudo /cosmos3/naoj/rc3.d/S99astnaojd stop; nohup sudo /cosmos3/naoj/rc3.d/S99astnaojd start"

Aspirin monitor did not work...

↑

UTC0340 COSMOS3 restart†

[asteobs@aste-1c ~]$ sudo /cosmos3/naoj/sbin/cos3_cntl restart all

↑

UTC0343 Restart remote-site (MITAKA) COSMOS3 and its connections to the ASTE site on a remote site†

[asteobs@aste-mx1 Desktop]$ssh -t aste-mt1 "sudo /cosmos3/naoj/sbin/cos3_cntl restart"

Environ and aspirin monitors did not work..

↑

UTC0346 Restart Envmon†

[asteobs@aste-1c ~]$ ssh aste-v1c "/opt/sudo/bin/sudo /cosmos3/naoj/rc3.d/S99astnaojd stop; nohup /opt/sudo/bin/sudo /cosmos3/naoj/rc3.d/S99astnaojd start"

Restart did not finished...
But environ and aspirin monitors stated to work

↑

UTC0348 Restart Aspirin†

[asteobs@aste-1c ~] ssh -t aste-1c "sudo /cosmos3/naoj/rc3.d/S99astnaojd stop; nohup sudo /cosmos3/naoj/rc3.d/S99astnaojd start"

Aspirin monitor did not work ??

↑

UTC0350 COSMOS3 restart†

[asteobs@aste-1c ~]$ sudo /cosmos3/naoj/sbin/cos3_cntl restart all

↑

UTC0355 Restart remote-site (MITAKA) COSMOS3 and its connections to the ASTE site on a remote site†

[asteobs@aste-mx1 Desktop]$ssh -t aste-mt1 "sudo /cosmos3/naoj/sbin/cos3_cntl restart"

Environ and aspirin monitors stated to work

↑

ERROR message†

[asteobs@aste-1c ~]$ 2016/11/13 03:57:51 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 03:57:51 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 03:57:51 ERROR   shm_pressure : Failed to read data
2016/11/13 03:57:51 WARNING  shm_pressure : pressure read retry
2016/11/13 04:02:56 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 04:02:56 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 04:02:56 ERROR   shm_pressure : Failed to read data
2016/11/13 04:02:56 WARNING  shm_pressure : pressure read retry
2016/11/13 04:22:54 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 04:22:54 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 04:22:54 ERROR   shm_pressure : Failed to read data
2016/11/13 04:22:54 WARNING  shm_pressure : pressure read retry
[asteobs@aste-1c ~]$ 2016/11/13 04:41:08 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 04:41:08 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 04:41:08 ERROR   shm_pressure : Failed to read data
2016/11/13 04:41:08 WARNING  shm_pressure : pressure read retry

↑

UTC0438 Observation check for WHSF†

Group/Project/Filename: aste16/linux16/OriK-c2

 ASTE Environment Monitor 2016/11/13 04:38:42

===================================ASTE Site===================================
  Temp. :  -7.13 C   Humid. : 75.38 % (  2.70 hPa )   Solar :  0.00 kW/m2
  Wind  :   4.51 m/s  211 deg   AirPressure : 570.20 hPa    ( Rain:  0.03 )
  Opacity @220 GHz :   0.0977
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.06 degC   Humid. : 12.80 %
  DBE(MAC):   20.4 degC  27.7 degC  25.7 degC  23.1 degC
  DBE(WHSF):  20.0 degC  21.0 degC  21.0 degC  22.0 degC  22.0 degC  21.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     18.30 C   16.30 C    5.40 C   18.30 C   -7.60 C   18.39 C
  Internal Ret.    19.89 C   15.90 C   16.70 C   16.89 C   16.00 C   17.80 C
  External        168.60 C   -7.80 C    3.80 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.60 degC   19.70 degC   -5.70 degC
  Room Temp.:    17.80 degC

Tuning

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 350.900693088
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 350.900693088
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.204971,10.067291,-0.280273,0.003311,0.013885,4.910538,0.003616,0.023346,4.910538,1
> GET_CLNA 0 2 
1.204910,10.047760,-0.383606,0.003265,0.023956,-4.848572,0.004181,0.023193,4.910477,1
> GET_CLNA 1 1 
1.205948,10.036926,-0.797577,0.003174,0.022125,-4.882095,0.003235,0.025177,-4.882111,1
> GET_CLNA 1 2 
1.206573,10.089874,-0.303436,0.003677,0.020294,-4.882050,0.003448,0.014801,4.931702,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 350.900693088
350.900693 2.100000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.100 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.982269,61.163330
> GET_SIS_VC 0 2 
1.786194,44.757080
> GET_SIS_VC 1 1 
1.811371,34.082031
> GET_SIS_VC 1 2 
1.813736,30.868530
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 350.900693088
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 350.900693088
/cosmos3/naoj/bin/loatt_dash345 308 287
Set ATT     : Pol0=308, Pol1=287
 Pol0 =      308   , Pol1 =      287
 Pol0 = 0.007518[A], Pol1 = 0.007006[A]
 Pol0 = 0.674292[V], Pol1 = 0.771317[V]

[asteobs@aste-1c ~]$ whsf_tune S1USB S1LSB S2USB S2LSB
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161113t044200z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161113t044200z open_mmc('mmc1:8501'): socket '5' connect success.
20161113t044200z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161113t044200z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161113t044201z mmc1 r reset_all.
mmc is active
20161113t044201z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161113t044203z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161113t044203z close_mmc(): socket '5' closed.
20161113t044203z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	-1.37	-0.77	62.45	60.24	-1.70	-1.76	95.45	94.77	[mV]
	***Set ATT***
	S1USB:ATT_old = 32.75 [dB]
	S1USB:ATT overrange: ATT=32.75
	S1USB:ATT_new = 32.75 [dB]
	S1LSB:ATT_old = 32.75 [dB]
	S1LSB:ATT overrange: ATT=32.75
	S1LSB:ATT_new = 32.75 [dB]
	S2USB:ATT_old = 14.50 [dB]
	S2USB:ATT_new = 14.50 [dB]
	S2LSB:ATT_old = 17.00 [dB]
	S2LSB:ATT_new = 17.00 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	-1.36	-0.73	61.00	59.99	-1.64	-1.69	95.09	93.48	[mV]
	***Set ATT***
	S1USB:ATT_old = 32.75 [dB]
	S1USB:ATT overrange: ATT=32.75
	S1USB:ATT_new = 32.75 [dB]
	S1LSB:ATT_old = 32.75 [dB]
	S1LSB:ATT overrange: ATT=32.75
	S1LSB:ATT_new = 32.75 [dB]
	S2USB:ATT_old = 14.50 [dB]
	S2USB:ATT_new = 14.50 [dB]
	S2LSB:ATT_old = 17.00 [dB]
	S2LSB:ATT_new = 17.00 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	-1.41	-0.78	61.38	60.04	-1.61	-1.75	95.08	93.26	[mV]

[asteobs@aste-1c ~]$ whsf_tune X-IF1 X-IF2 Y-IF1 Y-IF2
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161113t044227z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161113t044227z open_mmc('mmc1:8501'): socket '5' connect success.
20161113t044227z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161113t044227z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161113t044227z mmc1 r reset_all.
mmc is active
20161113t044227z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161113t044230z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161113t044230z close_mmc(): socket '5' closed.
20161113t044230z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	-1.10	-0.85	61.13	59.91	-1.72	-1.74	94.34	93.23	[mV]
	***Set ATT***
	S1IFA:ATT_old = 23.75 [dB]
	S1IFA:ATT overrange: ATT=23.75
	S1IFA:ATT_new = 23.75 [dB]
	S1IFB:ATT_old = 23.75 [dB]
	S1IFB:ATT overrange: ATT=23.75
	S1IFB:ATT_new = 23.75 [dB]
	S2IFA:ATT_old = 5.75 [dB]
	S2IFA:ATT_new = 5.75 [dB]
	S2IFB:ATT_old = 6.50 [dB]
	S2IFB:ATT_new = 6.50 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	-1.46	-0.69	61.05	59.65	-1.73	-1.71	94.70	92.86	[mV]
	***Set ATT***
	S1IFA:ATT_old = 23.75 [dB]
	S1IFA:ATT overrange: ATT=23.75
	S1IFA:ATT_new = 23.75 [dB]
	S1IFB:ATT_old = 23.75 [dB]
	S1IFB:ATT overrange: ATT=23.75
	S1IFB:ATT_new = 23.75 [dB]
	S2IFA:ATT_old = 5.75 [dB]
	S2IFA:ATT_new = 5.75 [dB]
	S2IFB:ATT_old = 6.50 [dB]
 	S2IFB:ATT_new = 6.50 [dB]
	***Please wait a moment***
	***TPD voltage***
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	-1.41	-0.76	61.18	59.95	-1.82	-1.83	94.46	93.28	[mV]

[asteobs@aste-1c ~]$ whsf_rsky
Connected to: IF module
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161113t044253z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161113t044253z open_mmc('mmc1:8501'): socket '5' connect success.
20161113t044253z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161113t044253z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161113t044253z mmc1 r reset_all.
mmc is active
20161113t044253z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161113t044255z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161113t044255z close_mmc(): socket '5' closed.
20161113t044255z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	-1.5	-0.8	61.7	60.0	-1.8	-1.8	95.1	93.4	[mV]
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161113t044259z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161113t044259z open_mmc('mmc1:8501'): socket '5' connect success.
20161113t044259z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161113t044259z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161113t044259z mmc1 sky reset_all.
mmc is active
20161113t044259z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161113t044301z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161113t044301z close_mmc(): socket '5' closed.
20161113t044301z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	-2.5	-1.7	35.8	31.2	-1.7	-1.8	54.5	50.6	[mV]

	Result: R-SKY
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	0.000	0.000	2.361	2.848	0.000	0.000	2.423	2.666	[dB]

	Result: Tsys[Tamb=293K]
	S1USB	S1LSB	S2USB	S2LSB	X-IF1	X-IF2	Y-IF1	Y-IF2
	0.0	0.0	405.8	316.3	0.0	0.0	392.3	345.7	[K]

Observation => Qlook did not work...
=> Restart remote-site (MITAKA) COSMOS3 and its connections to the ASTE site on a remote site
```
[asteobs@aste-mx1 Desktop]$ssh -t aste-mt1 "sudo /cosmos3/naoj/sbin/cos3_cntl restart"
```

Observation
- Strange signal in X1 and X3

↑

UTC0458 ANTENNA_G trouble†

COSMOS3 restart
Restart remote-site (MITAKA) COSMOS3 and its connections to the ASTE site on a remote site

↑

Retry Observation†

Group/Project/Filename: aste16/linux16/OriK-c2

 ASTE Environment Monitor 2016/11/13 05:06:41

===================================ASTE Site===================================
  Temp. :  -7.94 C   Humid. : 76.78 % (  2.58 hPa )   Solar :  0.00 kW/m2
  Wind  :   0.66 m/s  246 deg   AirPressure : 570.10 hPa    ( Rain:  0.03 )
  Opacity @220 GHz :   0.0583
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  15.03 degC   Humid. : 12.24 %
  DBE(MAC):   20.0 degC  27.2 degC  25.1 degC  22.9 degC
  DBE(WHSF):  20.0 degC  20.0 degC  20.0 degC  22.0 degC  21.0 degC  20.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.20 C   16.70 C   16.10 C   18.39 C   -8.60 C   18.30 C
  Internal Ret.    19.60 C   16.30 C   17.10 C   17.39 C   16.39 C   17.39 C
  External        168.60 C   -7.90 C    2.80 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.10 degC   19.10 degC   -7.60 degC
  Room Temp.:    17.10 degC

Start tuning twice
Cannot connect line Qlook (E0018 Connection refused to server process)
=> Restart remote-site (MITAKA) COSMOS3 and its connections to the ASTE site on a remote site

Observation
- Strange signal in X1 and X3

↑

ERROR message†

[asteobs@aste-1c ~]$ 2016/11/13 05:24:30 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/13 05:24:30 ERROR shm_pressure : Read error (serial_read2) 2016/11/13 05:24:30 ERROR shm_pressure : Failed to read data 2016/11/13 05:24:30 WARNING shm_pressure : pressure read retry 2016/11/13 05:25:58 ERROR shm_pressure : serial_read( 1 chars ) timeout 2016/11/13 05:25:58 ERROR shm_pressure : Read error (serial_read2) 2016/11/13 05:25:58 ERROR shm_pressure : Failed to read data 2016/11/13 05:25:58 WARNING shm_pressure : pressure read retry

↑

A16016†

↑

observer info†

izumi natsuko
skype: izumi.natsuko

ASTE Environment Monitor 2016/11/13 05:27:04

===================================ASTE Site===================================
  Temp. :  -7.65 C   Humid. : 76.31 % (  2.63 hPa )   Solar :  0.00 kW/m2
  Wind  :   1.24 m/s  131 deg   AirPressure : 570.01 hPa    ( Rain:  0.03 )
  Opacity @220 GHz :   0.0927
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.93 degC   Humid. : 12.20 %
  DBE(MAC):   19.8 degC  27.0 degC  25.1 degC  22.8 degC
  DBE(WHSF):  20.0 degC  20.0 degC  20.0 degC  22.0 degC  21.0 degC  20.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     17.10 C   16.10 C   -1.40 C   18.10 C   -7.90 C   17.70 C
  Internal Ret.    19.39 C   15.80 C   16.00 C   16.60 C   15.90 C   17.10 C
  External        168.60 C   -8.50 C    7.40 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    21.60 degC   20.30 degC   -7.60 degC
  Room Temp.:    19.10 degC

↑

UTC0528 Pointing DASH345†

Filename:L2P-5p1

Tuning 12CO(3-2) P0 and P1 LSB

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.549911136
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.549911136
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.204926,10.051575,-0.279694,0.003342,0.013885,4.910538,0.003693,0.023651,4.910461,1
> GET_CLNA 0 2 
1.204880,10.045471,-0.383453,0.003250,0.022888,-4.848557,0.004089,0.020752,4.910492,1
> GET_CLNA 1 1 
1.206009,10.054169,-0.797440,0.003220,0.022888,-4.882050,0.003342,0.025482,-4.882202,1
> GET_CLNA 1 2 
1.206680,10.092621,-0.303375,0.003677,0.018616,-4.882126,0.003494,0.013123,4.931778,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.549911136
351.549911 2.100000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.100 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.980362,51.000977
> GET_SIS_VC 0 2 
1.782074,33.096313
> GET_SIS_VC 1 1 
1.807251,57.922363
> GET_SIS_VC 1 2 
1.815720,40.750122
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.549911136
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.549911136
/cosmos3/naoj/bin/loatt_dash345 293 286
Set ATT     : Pol0=293, Pol1=286
 Pol0 =      293   , Pol1 =      286
 Pol0 = 0.007152[A], Pol1 = 0.006981[A]
 Pol0 = 0.670861[V], Pol1 = 0.770739[V]

[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161113t053138z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161113t053138z open_mmc('mmc1:8501'): socket '4' connect success.
20161113t053138z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161113t053138z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161113t053139z mmc1 r reset_all.
mmc is active
20161113t053139z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161113t053141z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161113t053141z close_mmc(): socket '4' closed.
20161113t053141z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 14 dB      E/O att. = 14 dB    IF level=0.038515
new E/O att. = 14 dB    IF level=0.038595
new E/O att. = 16 dB    IF level=0.022924
new E/O att. = 14 dB    IF level=0.041135
new E/O att. = 16 dB    IF level=0.023003
16 dB  0.023003 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 15 dB    IF level=0.046391
new E/O att. = 15 dB    IF level=0.047049
new E/O att. = 14 dB    IF level=0.062675
new E/O att. = 15 dB    IF level=0.043443
15 dB  0.043443 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161113t053217z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161113t053217z open_mmc('mmc1:8501'): socket '4' connect success.
20161113t053217z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161113t053217z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161113t053217z mmc1 sky reset_all.
mmc is active
20161113t053217z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161113t053219z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161113t053219z close_mmc(): socket '4' closed.
20161113t053219z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

Pointing
- Baseline in P0 (A3, A4) is not good

ERROR massage

[asteobs@aste-1c ~]$ 2016/11/13 05:39:22 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 05:39:22 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 05:39:22 ERROR   shm_pressure : Failed to read data
2016/11/13 05:39:22 WARNING  shm_pressure : pressure read retry
[asteobs@aste-1c ~]$ asterx_set2016/11/13 05:40:50 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 05:40:50 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 05:40:50 ERROR   shm_pressure : Failed to read data
2016/11/13 05:40:50 WARNING  shm_pressure : pressure read retry

Filename:L2P-5p4

Tuning 12CO(3-2) P0 and P1 USB

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 339.949898856
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 339.949898856
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.204971,10.064697,-0.279785,0.003326,0.012970,4.910461,0.003571,0.023499,4.910538,1
> GET_CLNA 0 2 
1.205093,10.052338,-0.383408,0.003265,0.023346,-4.848557,0.004089,0.021210,4.910507,1
> GET_CLNA 1 1 
1.206070,10.040588,-0.797073,0.003189,0.022583,-4.882111,0.003281,0.025024,-4.882065,1
> GET_CLNA 1 2 
1.206619,10.093994,-0.303009,0.003754,0.019684,-4.882095,0.003403,0.013885,4.931519,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 339.949898856
339.949899 1.900000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 1.900 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.780777,14.776611
> GET_SIS_VC 0 2 
1.783600,10.705566
> GET_SIS_VC 1 1 
1.807632,18.823242
> GET_SIS_VC 1 2 
1.811676,17.349243
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 339.949898856
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 339.949898856
/cosmos3/naoj/bin/loatt_dash345 287 285
Set ATT     : Pol0=287, Pol1=285
 Pol0 =      287   , Pol1 =      285
 Pol0 = 0.007006[A], Pol1 = 0.006957[A]
 Pol0 = 0.669662[V], Pol1 = 0.770640[V]

[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161113t054203z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161113t054203z open_mmc('mmc1:8501'): socket '4' connect success.
20161113t054203z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161113t054203z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161113t054203z mmc1 r reset_all.
mmc is active
20161113t054203z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161113t054205z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161113t054205z close_mmc(): socket '4' closed.
20161113t054205z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 16 dB      E/O att. = 16 dB    IF level=0.013566
new E/O att. = 16 dB    IF level=0.013600
new E/O att. = 14 dB    IF level=0.021161
new E/O att. = 12 dB    IF level=0.032052
new E/O att. = 14 dB    IF level=0.018066
new E/O att. = 12 dB    IF level=0.031901
12 dB  0.031901 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
 volt=0.050000
    E/O att. = 15 dB    IF level=0.034606
new E/O att. = 15 dB    IF level=0.034761
new E/O att. = 14 dB    IF level=0.046210
new E/O att. = 13 dB    IF level=0.057977
new E/O att. = 14 dB    IF level=0.041138
14 dB  0.041138 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161113t054257z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161113t054257z open_mmc('mmc1:8501'): socket '4' connect success.
20161113t054257z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161113t054257z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161113t054258z mmc1 sky reset_all.
mmc is active
20161113t054258z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161113t054300z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161113t054300z close_mmc(): socket '4' closed.
20161113t054300z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

Pointing
- Baseline in P0 (A1, A2) seems to be good..

Filename:L2P-5p4

Tuning 12CO(3-2) in P1 LSB HCO+(4-3) in P1 USB

[asteobs@aste-1c ~]$ asterx_set DASH345
### Query of LO Freq ###
LO Freq = 351.549885600
### Set CLNA ###
/cosmos3/naoj/bin/femc_ctl DASH345 CLNA_ON 351.549885600
vd0=1.200000, id0=10.000000
vd1=0.000000, id1=0.000000
vd2=0.000000, id2=0.000000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 
OK
> GET_CLNA 0 1 
1.205017,10.055237,-0.279846,0.003387,0.013428,4.910492,0.003662,0.022736,4.910446,1
> GET_CLNA 0 2 
1.205002,10.048370,-0.383560,0.003189,0.022888,-4.848663,0.004166,0.021515,4.910477,1
> GET_CLNA 1 1 
1.205841,10.029449,-0.797058,0.003159,0.022736,-4.882050,0.003250,0.024261,-4.882111,1
> GET_CLNA 1 2 
1.206619,10.097656,-0.302704,0.003738,0.019989,-4.882019,0.003418,0.013275,4.931656,1
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set SIS bias ###
/cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.549885600
351.549886 2.100000 1.900000 1.900000 1.900000
ASTE FEMC:OPEN
FEMC_TCP 7 

Ver 0.91
> 
Program running.
Do not turn off power to CAN nodes.
---------- 45 4C 01 08 00 E1nd at Node index 00
AMBSI CAN Library V1.1.2
AMBSI Firmware V1.0.1
FEMC Firmware V2.5.0
FPGA V2.1.0
10 F2 B3 58 2 8 0 1B
1 A4 9A 4F 14 0 0 19
23 9B DE 4C 1 0 0 44
0 0 0 0 0 0 0 0
> SET_SIS_MODE 0 
SET SIS MODE:CLOSE LOOP
> SET_SIS_V 0 1 2.100 
OK
> SET_SIS_V 0 2 1.900 
OK
> SET_SIS_V 1 1 1.900 
OK
> SET_SIS_V 1 2 1.900 
OK
> GET_SIS_VC 0 1 
1.981888,72.283936
> GET_SIS_VC 0 2 
1.781693,48.083496
> GET_SIS_VC 1 1 
1.808853,59.622192
> GET_SIS_VC 1 2 
1.814728,42.175293
> CAN_CLOSE
CAN closed
ASTE FEMC:CLOSE
### Set LO Power ###
/cosmos3/naoj/bin/loatt_dash345_tune 351.549885600
/cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.549885600
/cosmos3/naoj/bin/loatt_dash345 293 286
Set ATT     : Pol0=293, Pol1=286
 Pol0 =      293   , Pol1 =      286
 Pol0 = 0.007151[A], Pol1 = 0.006981[A]
 Pol0 = 0.670436[V], Pol1 = 0.770583[V]

[asteobs@aste-1c ~]$ mmc1_rstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe r
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161113t055120z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161113t055120z open_mmc('mmc1:8501'): socket '4' connect success.
20161113t055120z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161113t055120z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_r start.
cmd_reset_all()
20161113t055120z mmc1 r reset_all.
mmc is active
20161113t055120z mmc1 is active.
mode=0000 0
mode=1000 4096
mode=0000 0
position 'R' verify ok.
seq_r end.
20161113t055122z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161113t055122z close_mmc(): socket '4' closed.
20161113t055122z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

[asteobs@aste-1c ~]$ ifeo_tune 1 0.030
volt=0.030000
    E/O att. = 12 dB      E/O att. = 12 dB    IF level=0.058716
new E/O att. = 12 dB    IF level=0.058278
new E/O att. = 14 dB    IF level=0.034396
new E/O att. = 16 dB    IF level=0.022961
new E/O att. = 14 dB    IF level=0.040896
14 dB  0.040896 V

[asteobs@aste-1c ~]$ ifeo_tune 2 0.050
volt=0.050000
    E/O att. = 14 dB    IF level=0.061242
new E/O att. = 14 dB    IF level=0.061462
new E/O att. = 15 dB    IF level=0.045948
new E/O att. = 14 dB    IF level=0.064498
new E/O att. = 15 dB    IF level=0.045902
15 dB  0.045902 V

[asteobs@aste-1c ~]$ mmc1_sstop
. mmc1 is up and running
/cosmos3/naoj/sbin/mmc1_com.exe sky
Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open]
20161113t055157z /cosmos3/naoj/sbin/mmc1_com.exe: invoked.
20161113t055157z open_mmc('mmc1:8501'): socket '4' connect success.
20161113t055157z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened.
20161113t055157z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command.
seq_sky start.
cmd_reset_all()
20161113t055157z mmc1 sky reset_all.
mmc is active
20161113t055157z mmc1 is active.
mode=0000 0
mode=2000 8192
mode=0000 0
position 'SKY' verify ok.
seq_sky end.
20161113t055159z /cosmos3/naoj/sbin/mmc1_com.exe: execute end.
20161113t055159z close_mmc(): socket '4' closed.
20161113t055159z /cosmos3/naoj/sbin/mmc1_com.exe: normal end.

Pointing
- ddAz, ddEl = -3.7, 3.5

ERROR message

[asteobs@aste-1c ~]$ 2016/11/13 06:15:15 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 06:15:15 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 06:15:15 ERROR   shm_pressure : Failed to read data
2016/11/13 06:15:15 WARNING  shm_pressure : pressure read retry
2016/11/13 06:18:02 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 06:18:02 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 06:18:02 ERROR   shm_pressure : Failed to read data
2016/11/13 06:18:02 WARNING  shm_pressure : pressure read retry
2016/11/13 06:21:22 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 06:21:22 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 06:21:22 ERROR   shm_pressure : Failed to read data
2016/11/13 06:21:22 WARNING  shm_pressure : pressure read retry
2016/11/13 06:27:26 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 06:27:26 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 06:27:26 ERROR   shm_pressure : Failed to read data
2016/11/13 06:27:26 WARNING  shm_pressure : pressure read retry

↑

UTC0632 Standard source Orion-KL†

Filename:OrK-c2C

 ASTE Environment Monitor 2016/11/13 06:32:17

===================================ASTE Site===================================
  Temp. :  -9.34 C   Humid. : 74.95 % (  2.26 hPa )   Solar :  0.00 kW/m2
  Wind  :   1.04 m/s  204 deg   AirPressure : 569.60 hPa    ( Rain:  0.02 )
  Opacity @220 GHz :   0.0882
================================ Receiver Cabin ===============================
  Main Cabin:  18.4 C  Upper Cabin:   8.2 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.52 degC   Humid. : 11.91 %
  DBE(MAC):   17.2 degC  20.1 degC  21.7 degC  21.3 degC
  DBE(WHSF):  18.0 degC  19.0 degC  19.0 degC  20.0 degC  20.0 degC  19.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     15.60 C   14.70 C   14.30 C   15.60 C    0.20 C   15.90 C
  Internal Ret.    17.70 C   14.80 C   14.60 C   -7.10 C   15.00 C   15.80 C
  External        168.60 C  -10.60 C   -5.40 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.50 degC   19.20 degC   -9.50 degC
  Room Temp.:    17.10 degC

Filename:OK-c2CW

 ASTE Environment Monitor 2016/11/13 06:37:16

===================================ASTE Site===================================
  Temp. :  -9.30 C   Humid. : 75.70 % (  2.29 hPa )   Solar :  0.00 kW/m2
  Wind  :   1.57 m/s  249 deg   AirPressure : 569.58 hPa    ( Rain:  0.02 )
  Opacity @220 GHz :   0.0887
================================ Receiver Cabin ===============================
  Main Cabin:  17.9 C  Upper Cabin:   8.1 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.52 degC   Humid. : 11.47 %
  DBE(MAC):   17.3 degC  20.3 degC  21.8 degC  21.4 degC
  DBE(WHSF):  18.0 degC  19.0 degC  19.0 degC  20.0 degC  20.0 degC  19.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     15.50 C   15.30 C   19.10 C   15.90 C   -9.60 C   15.90 C
  Internal Ret.    17.70 C   15.20 C   15.20 C   -6.10 C   15.30 C   15.40 C
  External        168.60 C  -10.80 C   -0.90 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    22.90 degC   25.50 degC   -8.60 degC
  Room Temp.:    19.00 degC

ERROR message

2016/11/13 06:34:48 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 06:34:48 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 06:34:48 ERROR   shm_pressure : Failed to read data
2016/11/13 06:34:48 WARNING  shm_pressure : pressure read retry
2016/11/13 06:38:08 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 06:38:08 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 06:38:08 ERROR   shm_pressure : Failed to read data
2016/11/13 06:38:08 WARNING  shm_pressure : pressure read retry
2016/11/13 06:42:40 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 06:42:40 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 06:42:40 ERROR   shm_pressure : Failed to read data
2016/11/13 06:42:40 WARNING  shm_pressure : pressure read retry

↑

UTC0644 OTF mapping X scan NOM2005-63†

 ASTE Environment Monitor 2016/11/13 06:47:08

===================================ASTE Site===================================
  Temp. :  -8.54 C   Humid. : 83.23 % (  2.67 hPa )   Solar :  0.00 kW/m2
  Wind  :   1.62 m/s  305 deg   AirPressure : 569.49 hPa    ( Rain:  0.02 )
  Opacity @220 GHz :   0.0825
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.39 degC   Humid. : 11.71 %
  DBE(MAC):   17.8 degC  22.9 degC  22.5 degC  21.4 degC
  DBE(WHSF):  18.0 degC  19.0 degC  19.0 degC  20.0 degC  20.0 degC  19.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     15.50 C   15.10 C   -0.20 C   16.10 C   11.90 C   16.30 C
  Internal Ret.    17.80 C   14.90 C   14.90 C    8.30 C   15.10 C   15.80 C
  External        168.60 C  -11.10 C   -5.20 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.10 degC   19.00 degC   -9.90 degC
  Room Temp.:    16.89 degC

↑

UTC0729 OTF mapping Y scan NOM2005-63†

 ASTE Environment Monitor 2016/11/13 07:29:41

===================================ASTE Site===================================
  Temp. :  -5.75 C   Humid. : 37.47 % (  1.49 hPa )   Solar :  0.00 kW/m2
  Wind  :   2.40 m/s  306 deg   AirPressure : 569.10 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0621
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.66 degC   Humid. : 10.94 %
  DBE(MAC):   17.3 degC  20.4 degC  22.0 degC  21.5 degC
  DBE(WHSF):  18.0 degC  18.0 degC  19.0 degC  20.0 degC  20.0 degC  19.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     15.40 C   15.20 C   18.10 C   16.10 C   15.10 C   15.80 C
  Internal Ret.    17.60 C   15.10 C   15.20 C   -6.10 C   15.50 C   15.40 C
  External        168.60 C   -7.70 C    0.50 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.20 degC   18.89 degC   -6.60 degC
  Room Temp.:    17.00 degC

ERROR message

2016/11/13 07:33:38 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 07:33:38 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 07:33:38 ERROR   shm_pressure : Failed to read data
2016/11/13 07:33:38 WARNING  shm_pressure : pressure read retry

↑

UTC0744 Lost priority†

↑

UTC0745 Retry OTF mapping Y scan NOM2005-63†

ASTE Environment Monitor 2016/11/13 07:45:20

===================================ASTE Site===================================
  Temp. :  -8.85 C   Humid. : 73.58 % (  2.31 hPa )   Solar :  0.00 kW/m2
  Wind  :   2.90 m/s  133 deg   AirPressure : 569.18 hPa    ( Rain:  0.02 )
  Opacity @220 GHz :   0.0396
================================ Receiver Cabin ===============================
  Main Cabin:  17.4 C  Upper Cabin:   8.1 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.66 degC   Humid. : 10.76 %
  DBE(MAC):   17.2 degC  20.3 degC  21.9 degC  21.4 degC
  DBE(WHSF):  18.0 degC  18.0 degC  19.0 degC  20.0 degC  20.0 degC  19.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     15.00 C   15.10 C   16.30 C   16.10 C   14.80 C   15.80 C
  Internal Ret.    17.50 C   15.10 C   14.90 C   -6.60 C   15.40 C   15.20 C
  External        168.60 C  -10.10 C    2.10 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    23.30 degC   26.40 degC   -9.19 degC
  Room Temp.:    18.80 degC

ERROR message

2016/11/13 08:13:12 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 08:13:12 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 08:13:12 ERROR   shm_pressure : Failed to read data
2016/11/13 08:13:12 WARNING  shm_pressure : pressure read retry

↑

0826 Pointing L2-Pup†

Filename:L2P-5p3

 ASTE Environment Monitor 2016/11/13 08:26:39

===================================ASTE Site===================================
  Temp. :  -9.42 C   Humid. : 78.45 % (  2.35 hPa )   Solar :  0.00 kW/m2
  Wind  :   5.28 m/s  281 deg   AirPressure : 569.41 hPa    ( Rain:  0.02 )
  Opacity @220 GHz :   0.0594
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.50 degC   Humid. : 10.78 %
  DBE(MAC):   17.1 degC  20.3 degC  21.7 degC  21.3 degC
  DBE(WHSF):  18.0 degC  18.0 degC  19.0 degC  20.0 degC  20.0 degC  19.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     14.90 C   15.10 C   14.60 C   15.40 C  -10.10 C   15.80 C
  Internal Ret.    17.30 C   15.10 C   15.00 C   -5.90 C   15.30 C   15.50 C
  External        168.60 C  -11.30 C   -2.20 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    19.89 degC   18.80 degC  -10.90 degC
  Room Temp.:    17.00 degC

ddAz, ddEl = 2.0, 3.0

ERROR message

2016/11/13 08:27:15 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 08:27:15 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 08:27:15 ERROR   shm_pressure : Failed to read data
2016/11/13 08:27:15 WARNING  shm_pressure : pressure read retry

↑

UTC0900 Standard source†

Filename:OrK-c2C

ASTE Environment Monitor 2016/11/13 09:00:36

===================================ASTE Site===================================
  Temp. :  -8.80 C   Humid. : 71.84 % (  2.26 hPa )   Solar :  0.00 kW/m2
  Wind  :   3.95 m/s  255 deg   AirPressure : 569.17 hPa    ( Rain:  0.02 )
  Opacity @220 GHz :   0.0536
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  13.69 degC   Humid. : 11.18 %
  DBE(MAC):   16.5 degC  19.9 degC  21.1 degC  20.8 degC
  DBE(WHSF):  18.0 degC  18.0 degC  18.0 degC  19.0 degC  20.0 degC  18.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     14.50 C   15.20 C   15.50 C   16.39 C   14.90 C   15.90 C
  Internal Ret.    17.00 C   14.80 C   15.80 C   15.90 C   15.00 C   15.10 C
  External        168.60 C  -11.80 C   -1.80 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    23.50 degC   26.40 degC  -10.50 degC
  Room Temp.:    17.50 degC

Filename:OK-c2CW

ERROR message

2016/11/13 09:01:34 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 09:01:34 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 09:01:34 ERROR   shm_pressure : Failed to read data
2016/11/13 09:01:34 WARNING  shm_pressure : pressure read retry

↑

UTC0910 OTF mapping NOM2006-63 Xscan†

 ASTE Environment Monitor 2016/11/13 09:11:17

===================================ASTE Site===================================
  Temp. :  -7.69 C   Humid. : 58.66 % (  2.01 hPa )   Solar :  0.00 kW/m2
  Wind  :   2.10 m/s  307 deg   AirPressure : 569.13 hPa    ( Rain:  0.02 )
  Opacity @220 GHz :   0.0403
================================ Receiver Cabin ===============================
  Main Cabin:  16.2 C  Upper Cabin:   7.6 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  12.80 degC   Humid. : 11.63 %
  DBE(MAC):   16.1 degC  19.8 degC  21.0 degC  20.2 degC
  DBE(WHSF):  17.0 degC  17.0 degC  18.0 degC  19.0 degC  19.0 degC  18.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     14.20 C   13.80 C   10.80 C   15.30 C    5.40 C   15.00 C
  Internal Ret.    16.70 C   13.60 C   13.90 C   12.30 C   13.80 C   14.50 C
  External        168.60 C  -11.40 C    3.10 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    24.00 degC   27.20 degC  -11.50 degC
  Room Temp.:    18.50 degC

After UTC0830 my observation was not recorded in Auto Log...

ERROR message

2016/11/13 09:16:37 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 09:16:37 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 09:16:37 ERROR   shm_pressure : Failed to read data
2016/11/13 09:16:37 WARNING  shm_pressure : pressure read retry
2016/11/13 09:52:54 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 09:52:54 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 09:52:54 ERROR   shm_pressure : Failed to read data
2016/11/13 09:52:54 WARNING  shm_pressure : pressure read retry

↑

UTC0955 OTF mapping NOM2006-63 Yscan†

 ASTE Environment Monitor 2016/11/13 09:56:11

===================================ASTE Site===================================
  Temp. :  -8.74 C   Humid. : 48.58 % (  1.54 hPa )   Solar :  0.14 kW/m2
  Wind  :   1.10 m/s  284 deg   AirPressure : 569.30 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.0198
================================ Receiver Cabin ===============================
  Main Cabin:  17.1 C  Upper Cabin:   8.1 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  13.69 degC   Humid. : 10.09 %
  DBE(MAC):   16.7 degC  20.0 degC  21.3 degC  20.9 degC
  DBE(WHSF):  18.0 degC  18.0 degC  18.0 degC  20.0 degC  20.0 degC  18.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     14.50 C   14.90 C   -2.10 C   16.10 C   -8.00 C   15.00 C
  Internal Ret.    17.00 C   14.70 C   15.30 C   15.80 C   15.00 C   14.50 C
  External        168.60 C  -10.70 C   10.30 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.39 degC   19.30 degC  -10.19 degC
  Room Temp.:    17.20 degC

ERROR message

2016/11/13 10:16:29 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 10:16:29 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 10:16:29 ERROR   shm_pressure : Failed to read data
2016/11/13 10:16:29 WARNING  shm_pressure : pressure read retry

↑

UTC1027 Lost priority†

↑

UTC1028 Retry OTF mapping NOM2006-63 Yscan†

                     ASTE Environment Monitor 2016/11/13 10:32:57

===================================ASTE Site===================================
  Temp. :  -6.64 C   Humid. : 47.89 % (  1.78 hPa )   Solar :  0.27 kW/m2
  Wind  :   2.87 m/s  227 deg   AirPressure : 569.53 hPa    ( Rain:  0.02 )
  Opacity @220 GHz :   0.0380
================================ Receiver Cabin ===============================
  Main Cabin:  18.3 C  Upper Cabin:   7.6 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  13.43 degC   Humid. : 10.51 %
  DBE(MAC):   16.6 degC  19.5 degC  21.1 degC  20.6 degC
  DBE(WHSF):  17.0 degC  18.0 degC  18.0 degC  19.0 degC  19.0 degC  18.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     15.50 C   13.90 C   -6.00 C   15.00 C   -8.90 C   15.90 C
  Internal Ret.    16.80 C   14.30 C   13.50 C   -6.40 C   14.50 C   14.80 C
  External        168.60 C   -4.70 C   11.20 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.50 degC   19.30 degC   -5.40 degC
  Room Temp.:    17.60 degC

↑

UTC1109 Standard source†

Filename: OrK-c2C

Filename: OK-c2CW

 ASTE Environment Monitor 2016/11/13 11:14:25

===================================ASTE Site===================================
  Temp. :  -5.73 C   Humid. : 57.93 % (  2.31 hPa )   Solar :  0.50 kW/m2
  Wind  :   2.04 m/s  120 deg   AirPressure : 569.82 hPa    ( Rain:  0.02 )
  Opacity @220 GHz :   0.0339
================================ Receiver Cabin ===============================
  Main Cabin:  20.2 C  Upper Cabin:   7.5 C  AzTEC AE: 168.6 C  Dewar: 168.6 C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  13.29 degC   Humid. : 11.72 %
  DBE(MAC):   16.5 degC  19.6 degC  21.0 degC  20.5 degC
  DBE(WHSF):  18.0 degC  18.0 degC  18.0 degC  20.0 degC  20.0 degC  18.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     15.30 C   15.20 C   14.90 C   16.39 C   13.10 C   15.90 C
  Internal Ret.    17.10 C   14.70 C   15.40 C   15.90 C   14.80 C   15.60 C
  External        168.60 C    6.40 C    2.50 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    20.70 degC   19.89 degC   -1.20 degC
  Room Temp.:    17.70 degC

ERROR message

Segmentation Fault
Segmentation Fault
2016/11/13 11:18:57 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 11:18:57 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 11:18:57 ERROR   shm_pressure : Failed to read data
2016/11/13 11:18:57 WARNING  shm_pressure : pressure read retry
2016/11/13 11:25:53 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 11:25:53 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 11:25:53 ERROR   shm_pressure : Failed to read data
2016/11/13 11:25:53 WARNING  shm_pressure : pressure read retry
2016/11/13 11:30:32 ERROR   shm_pressure : serial_read( 1 chars ) timeout
2016/11/13 11:30:32 ERROR   shm_pressure : Read error (serial_read2)
2016/11/13 11:30:32 ERROR   shm_pressure : Failed to read data
2016/11/13 11:30:32 WARNING  shm_pressure : pressure read retry

History of Observing Log/2016-11-13 (No. 3)

Shm_error†

observer info†

UTC0250 Stop COSMOS 3†

UTC0250 Reboot aste-1c†

UTC0255 COSMOS3 restart†

UTC0300 Restart remote-site (MITAKA) COSMOS3 and its connections to the ASTE site on a remote site†

ERROR message†

UTC0315 Restart Envmon†

ERROR message†

UTC0325 Restart Aspirin†

UTC0330 Restart remote-site (MITAKA) COSMOS3 and its connections to the ASTE site on a remote site†

UTC0335 Restart Envmon†

UTC0339 Restart Aspirin†

UTC0340 COSMOS3 restart†

UTC0343 Restart remote-site (MITAKA) COSMOS3 and its connections to the ASTE site on a remote site†

UTC0346 Restart Envmon†

UTC0348 Restart Aspirin†

UTC0350 COSMOS3 restart†

UTC0355 Restart remote-site (MITAKA) COSMOS3 and its connections to the ASTE site on a remote site†

ERROR message†

UTC0438 Observation check for WHSF†

UTC0458 ANTENNA_G trouble†

Retry Observation†

ERROR message†

A16016†

observer info†

UTC0528 Pointing DASH345†

UTC0632 Standard source Orion-KL†

UTC0644 OTF mapping X scan NOM2005-63†

UTC0729 OTF mapping Y scan NOM2005-63†

UTC0744 Lost priority†

UTC0745 Retry OTF mapping Y scan NOM2005-63†

0826 Pointing L2-Pup†

UTC0900 Standard source†

UTC0910 OTF mapping NOM2006-63 Xscan†

UTC0955 OTF mapping NOM2006-63 Yscan†

UTC1027 Lost priority†

UTC1028 Retry OTF mapping NOM2006-63 Yscan†

UTC1109 Standard source†