Observing Log



A16016

observer info

UTC0544 Pointing L2 Pup with 12CO(3-2)

ASTE Environment Monitor 2016/12/02 06:25:38

===================================ASTE Site===================================
  Temp. :  -1.68 C   Humid. : 37.14 % (  2.01 hPa )   Solar :  0.00 kW/m2
  Wind  :   3.05 m/s  260 deg   AirPressure : 570.91 hPa    ( Rain:  0.01 )
  Opacity @220 GHz :   0.1070
================================ Receiver Cabin ===============================
  Main Cabin:   --- C  Upper Cabin:   --- C  AzTEC AE:   --- C  Dewar:   --- C
  SCD :   ----      ----      ----      ----
================================Observation Room===============================
  Temp. :  14.87 degC   Humid. : 10.25 %
  DBE(MAC):   15.6 degC  16.9 degC  16.8 degC  16.7 degC
  DBE(WHSF):   0.0 degC   0.0 degC   0.0 degC   0.0 degC   0.0 degC   0.0 degC
  Meeting Rm.:  Temp:  room:  -----       entrance:  -----       WC:  -----
-------------------------------Air Conditioners--------------------------------
  Internal Out     14.20 C   15.60 C   16.20 C   16.10 C   10.90 C   15.60 C
  Internal Ret.    15.70 C   15.50 C   16.10 C   15.80 C   15.60 C   15.10 C
  External        168.60 C   -4.30 C   -2.70 C  168.60 C
================================Antenna Shelter================================
  Air-cond. :    21.00 degC   20.00 degC   -3.20 degC
  Room Temp.:    18.30 degC

Ver 0.91

Program running. Do not turn off power to CAN nodes.


AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0

SET_CLNA 0 1 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 0 2 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 1 1 1.20 10.00 0.00 0.00 0.00 0.00 OK

SET_CLNA 1 2 1.20 10.00 0.00 0.00 0.00 0.00 OK

GET_CLNA 0 1 1.205078,10.063934,-0.278290,0.003296,0.013275,4.910400,0.003708,0.023346,4.910294,1

GET_CLNA 0 2 1.204987,10.054932,-0.381226,0.003281,0.022125,-4.848328,0.004120,0.021210,4.910233,1

GET_CLNA 1 1 1.205902,10.044098,-0.796371,0.003174,0.022430,-4.881989,0.003265,0.024261,-4.882019,1

GET_CLNA 1 2 1.206711,10.100250,-0.301697,0.003754,0.019226,-4.882065,0.003433,0.012970,4.931503,1

CAN_CLOSE CAN closed ASTE FEMC:CLOSE

### Set SIS bias ### /cosmos3/naoj/bin/femc_ctl DASH345 SIS_ON 351.547600608 351.547601 2.100000 1.900000 1.900000 1.900000 ASTE FEMC:OPEN FEMC_TCP 7

Ver 0.91

Program running. Do not turn off power to CAN nodes.


AMBSI CAN Library V1.1.2 AMBSI Firmware V1.0.1 FEMC Firmware V2.5.0 FPGA V2.1.0 10 F2 B3 58 2 8 0 1B 1 A4 9A 4F 14 0 0 19 23 9B DE 4C 1 0 0 44 0 0 0 0 0 0 0 0

SET_SIS_MODE 0 SET SIS MODE:CLOSE LOOP

SET_SIS_V 0 1 2.100 OK

SET_SIS_V 0 2 1.900 OK

SET_SIS_V 1 1 1.900 OK

SET_SIS_V 1 2 1.900 OK

GET_SIS_VC 0 1 1.985092,70.727539

GET_SIS_VC 0 2 1.786194,46.881104

GET_SIS_VC 1 1 1.814575,77.319336

GET_SIS_VC 1 2 1.815643,54.144287

CAN_CLOSE CAN closed ASTE FEMC:CLOSE

### Set LO Power ### /cosmos3/naoj/bin/loatt_dash345_tune 351.547600608 /cosmos3/naoj/bin/loatt_dash345_val /home/astedev/frontend/loatt_ctl/loatt_dash345.conf 351.547600608 /cosmos3/naoj/bin/loatt_dash345 293 286 Set ATT : Pol0=293, Pol1=286

Pol0 =      293   , Pol1 =      286
Pol0 = 0.007151[A], Pol1 = 0.006980[A]
Pol0 = 0.669700[V], Pol1 = 0.769535[V]

[asteobs@aste-1c ~]$ mmc1_rstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe r Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] 20161202t062553z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161202t062553z open_mmc('mmc1:8501'): socket '4' connect success. 20161202t062553z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161202t062553z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. seq_r start. cmd_reset_all() 20161202t062553z mmc1 r reset_all. mmc is active 20161202t062553z mmc1 is active. mode=0000 0 mode=1000 4096 mode=0000 0 position 'R' verify ok. seq_r end. 20161202t062556z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161202t062556z close_mmc(): socket '4' closed. 20161202t062556z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. [asteobs@aste-1c ~]$ ifeo_tune 1 0.030 volt=0.030000

   E/O att. = 12 dB      E/O att. = 12 dB    IF level=0.058347

new E/O att. = 12 dB IF level=0.058454 new E/O att. = 14 dB IF level=0.034518 new E/O att. = 16 dB IF level=0.022704 new E/O att. = 14 dB IF level=0.040971 14 dB 0.040971 V [asteobs@aste-1c ~]$ ifeo_tune 2 0.050 volt=0.050000

   E/O att. = 11 dB    IF level=0.121202

new E/O att. = 11 dB IF level=0.120285 new E/O att. = 12 dB IF level=0.093862 new E/O att. = 13 dB IF level=0.073001 new E/O att. = 14 dB IF level=0.056974 new E/O att. = 15 dB IF level=0.045008 new E/O att. = 14 dB IF level=0.063110 new E/O att. = 15 dB IF level=0.045317 15 dB 0.045317 V [asteobs@aste-1c ~]$ mmc1_sstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe sky Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] 20161202t062622z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161202t062622z open_mmc('mmc1:8501'): socket '4' connect success. 20161202t062622z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161202t062622z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. seq_sky start. cmd_reset_all() 20161202t062623z mmc1 sky reset_all. mmc is active 20161202t062623z mmc1 is active. mode=0000 0 mode=2000 8192 mode=0000 0 position 'SKY' verify ok. seq_sky end. 20161202t062625z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161202t062625z close_mmc(): socket '4' closed. 20161202t062625z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. [asteobs@aste-1c ~]$ yfactor 1 Execute /cosmos3/naoj/bin/mmc1_rstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe r Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] seq_r start. seq_r end. 20161202t062632z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161202t062632z open_mmc('mmc1:8501'): socket '8' connect success. 20161202t062632z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161202t062632z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. cmd_reset_all() 20161202t062632z mmc1 r reset_all. mmc is active 20161202t062632z mmc1 is active. mode=0000 0 mode=1000 4096 mode=0000 0 position 'R' verify ok. 20161202t062634z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161202t062634z close_mmc(): socket '8' closed. 20161202t062634z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. Execute /cosmos3/naoj/bin/ifeo 1

   E/O att. = 14 dB
E/O IF level = 0.038088 V

Execute /cosmos3/naoj/bin/mmc1_sstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe sky Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] seq_sky start. seq_sky end. 20161202t062637z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161202t062637z open_mmc('mmc1:8501'): socket '8' connect success. 20161202t062637z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161202t062637z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. cmd_reset_all() 20161202t062638z mmc1 sky reset_all. mmc is active 20161202t062638z mmc1 is active. mode=0000 0 mode=2000 8192 mode=0000 0 position 'SKY' verify ok. 20161202t062640z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161202t062640z close_mmc(): socket '8' closed. 20161202t062640z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. Execute /cosmos3/naoj/bin/ifeo 1

   E/O att. = 14 dB
E/O IF level = 0.020073 V

R=0.038088 V, Sky=0.020073 V, Y=2.781759 dB 2.781759 [asteobs@aste-1c ~]$ yfactor 2 Execute /cosmos3/naoj/bin/mmc1_rstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe r Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] seq_r start. seq_r end. 20161202t062646z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161202t062646z open_mmc('mmc1:8501'): socket '8' connect success. 20161202t062646z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161202t062646z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. cmd_reset_all() 20161202t062646z mmc1 r reset_all. mmc is active 20161202t062646z mmc1 is active. mode=0000 0 mode=1000 4096 mode=0000 0 position 'R' verify ok. 20161202t062649z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161202t062649z close_mmc(): socket '8' closed. 20161202t062649z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. Execute /cosmos3/naoj/bin/ifeo 2

   E/O att. = 15 dB
E/O IF level = 0.048010 V

Execute /cosmos3/naoj/bin/mmc1_sstop . mmc1 is up and running /cosmos3/naoj/sbin/mmc1_com.exe sky Log file = /var/tmp/mmc1.log. [mmc1_log.c:40 mmc1log_open] seq_sky start. seq_sky end. 20161202t062652z /cosmos3/naoj/sbin/mmc1_com.exe: invoked. 20161202t062652z open_mmc('mmc1:8501'): socket '8' connect success. 20161202t062652z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 opened. 20161202t062652z /cosmos3/naoj/sbin/mmc1_com.exe: mmc1 execute command. cmd_reset_all() 20161202t062652z mmc1 sky reset_all. mmc is active 20161202t062652z mmc1 is active. mode=0000 0 mode=2000 8192 mode=0000 0 position 'SKY' verify ok. 20161202t062654z /cosmos3/naoj/sbin/mmc1_com.exe: execute end. 20161202t062654z close_mmc(): socket '8' closed. 20161202t062654z /cosmos3/naoj/sbin/mmc1_com.exe: normal end. Execute /cosmos3/naoj/bin/ifeo 2

   E/O att. = 15 dB
E/O IF level = 0.025616 V

R=0.048010 V, Sky=0.025616 V, Y=2.728204 dB 2.728204

UTC0636 Restart Pointing L2 Pup with 12CO(3-2)


Front page   New Page list Search Recent changes   Help   RSS of recent changes