Warning: Undefined variable $s in /wwwsto01/wwwusers/gw-elog/osl/classes/DAO.php on line 959
NAOJ GW Elog Logbook
LOG-IN
Displaying report 1-1 of 1.
R&D (Cryogenic)
Print this report.
SatoshiTanioka - 10:45, Monday 20 January 2020 (1975)Get code to link to this report
fused silica mirror gluing

Yesterday I tried to glue a fused silica mirror to a mirror holder using a jig as show in attached picture.
I used DP-190 for gluing which was borrowed from Tomaru-san.

This morning I checked the situation of the mirror and it seemed glued to some extent which can be used for foled optical cavity.
The AR side was enough clean.
I will glue another mirror.

[note]
The procedures are as follows:

  1. Apply First Contact on HR surface for protection.
  2. Set a mirror holder and a jig.
  3. Apply glue on the  mirror holder.
  4. Attach the mirror to the mirror holder.
Images attached to this report
1975_20200120023632_mirrorglue.jpeg 1975_20200120023643_20200120glue.jpg 1975_20200120023647_20200120ar.jpg
Comments related to this report
SatoshiTanioka - 20:16, Monday 20 January 2020 (1977)

I successfully glued another fused silica mirror.
Now that I have a set of fused silica mirrors and I will start installation of folded cavity.