Warning: Undefined variable $s in /wwwsto01/wwwusers/gw-elog/osl/classes/DAO.php on line 959
NAOJ GW Elog Logbook
LOG-IN
Displaying report 1-1 of 1.
R&D (FilterCavity)
Print this report.
NaokiAritomi - 01:21, Tuesday 30 July 2019 (1523)Get code to link to this report
Squeezing and anti-squeezing with different green power

[Aritomi, Yuhang]

We measured squeezing and anti-squeezing with green power from 15 mW to 55 mW. Attached picture shows the result. Our case seems that loss is 25% and phase noise is 30 mrad. Note that this is not a fitting.

After this measurement, we checked visibility and found that visibility is 0.935 which means loss is 12.6%. (Note that when we calculated visibility, we didn't consider DC offset of PD. Visibility should be higher than this.) Then we aligned LO and BAB and visibility became 0.973 which means loss is 5.3%. However, squeeze level didn't increase.

green power (mW) MZ offset OPO temperature (kOhm) p pol PLL (MHz)
15 4.01 7.16 192
20 4.1 7.16 177
25 4.19 7.17 177
30 4.29 7.18 180
35 4.38 7.175 162
40 4.5 7.175 150
45 4.58 7.18 147
50 4.68 7.19 150
55 4.78 7.195 150
60 4.88 7.195 144
65 4.98 7.2 141
Images attached to this report
1523_20190730054246_sqzasqz20190729.png