Participant: Eleonora and Yuhang
Beccause we changed many cables and arranged the control devices space, we think the green should be misaligned. Yesterday, I checked that it is totally misaligned!
I did the procedure of standard alignment of green: check target on PR chamber, check the first iris, check the second iris and match incidence with reflection, finally end mirror. After these procedures, I got the new offset of each mirror's local control offset. Then I can lock green and infrared together. See attached Fig.1
| YAW | PITCH | |
| PR | 0.3 | -0.07 |
| BS | -0.11 | -0.9 |
| IM | 0 | 1.1 |
| EM | 2.4 | -2 |
I also found some problems and did some change during this process.
1. I connect the image of second iris to the third part of monitor. I also checked the light you can see in this second iris camera is corridor light. Because if I go to turn off the corridor light, it disappeared. See attached Fig.2
2. If you find problem in attached Fig.3, you need to reopen the program.
3. I tried to remote control of the second iris, but the network cable seems not working.
