We have put a BS infront of the two LC. Now, the polarization states are being generated after the "LC1, LC2, BS". This configuration will be treated as one optical element from now on.
1. Both LC 0-5 V with 10mV resolution
2. Both LC 5.001-25V with 20mV resolution
All, done with LC @ 30degC. Data is being saved with average order of 10.
foldername: 'C:\Users\ShalikaSingh\Atamapc\OneDrive\LC-Experiment\Measurement Data\Polarization states\20240301'
filename: 'Mon, Mar 4, 2024 2-13-11 PM.txt'
10mV step with averaging of 10th order will take around 30hrs. So, I changed. Now the configuration is as below in format: LC1,LC2,Resolution
1. 0-5V, 0-0.52V, 10mV
2. 0-5V, 0.52-5V, 20mV
3. 5-25,5-25V, 0.1V
foldername:
C:\Users\atama\OneDrive\LC-Experiment\Measurement Data\Polarization states\20240301
According to the calculation it seems that for the last scan from 5-25V it will take time
1. with 0.1V resolution--> 5hrs
2. with 50mV resolution--> 24hrs
The scan finished and hence. I will begin another scan with 50mV resolution from 5.02V-25V.