I confirmed the wiring of the ATC cryostat on the vacuum and air side. There are 3 Brundy 48-pin ports at the bottom of the cryostat labelled A, B and C. I only checked B, but the terminology and cabling should (hopefully) be the same for the other 2. The cables in air and vacuum are bundeled in sets of 4 labelled B1- B12. The table below shows the pin layout.
|
Name (wire bundle) |
Pins |
Wire Order (Pin number to wire color) | |
| In Air | Vacuum | ||
| B1 | A B C D |
Red Red-Black White White-Black |
Red Black Blue Yellow (I only checked B1 and B2 but it should be same for the rest) |
| B2 | E F G H | ||
| B3 | J K L M | ||
| B4 | N P R S | ||
| B5 | T U V W | ||
| B6 | X Y Z a | ||
| B7 | b c d e | ||
| B8 | f g h i | ||
| B9 | j k m n | ||
| B10 | p q r s | ||
| B11 | t u v w | ||
| B12 | x y z aa | ||