Aligining LC along its fast axis. 

 

1. The LC 2 axis was rotated by 2.15 degrees and this was specified as the initial angle(13.58 deg) in the analysis. The fast axis orientation obtained is as in Fig 1. 

 

2. The resolution of data is 13 degrees.

 

3. The LC was kept at a temperature of 30 degrees

 

Seems like I rotated by 2 degrees but LC rotated by 1 degree. We should rotate by remaining degree to align perfectly. 

 

folder_name = r'C:\Users\atama\OneDrive\LC-Experiment\Measurement Data\LC2_calibration data\fast axis 10'