[Takahashi, Aritomi]
Since there is a new 6.35Hz peak in END oplev spectra as reported in elog2808, we opened the end chamber and checked the suspension. We found that two magnets of end mirror fell down! This is the reason why the Z correction does not work recently. Takahashi-san will glue the magnets next Monday.
Picture of the mirror without magnets.
One magnet (upper) was glued with the jig and released 3 hours later. The other magnet (left) is under gluing. It will be released on the 14th.
The other magnet (left) was released. The TM was released and the chamber was closed.