ManuelMarchio - 02:36, Wednesday 27 April 2016 (241)
Noise investigation - Tama-sized sapphire sample sitting on blocks
I attach a report about the measurements I did this week
Non-image files attached to this report
Comments related to this report
I made a calculation that might explain why I couldn't see any absorption signal.
The cross point between pump and probe changes position when there is a thick sapphire sample.
Details are in the attached slide.
This might also explain why in my simulations the simulated scan shows a thicker sample than the measured scan. I will include this effect in the simulations and check the result.