R&D (FilterCavity)
YuhangZhao - 00:12, Friday 17 May 2019 (1354)
Difference of telescope's design and implementation for OPO transmission to AMC

I made the optimization of the telescope from OPO transmission to AMC. The entry is here. From my impression, I feel I move both lenses quite a lot. I just checked the position difference before and after optimization. I also compared the final implementation scheme with the initial design. The result is attached as the following form.

  lens1(holes=2.5cm) lens2(holes=2.5cm)
design position 3.16 25.68
first-time implementation position 2.2 25.9
final implementation position 3.1 23.4

1. The position of the lens is relative to 'the dichroic mirror after OPO'

2. I assume that the beam waist inside OPO is 2 holes away from 'the dichroic mirror after OPO'

 

I am sorry that all the design work of Eleonora Polini should be done again because I moved this lens.